4.1.2 Principles of trusses

The basic shape of the truss is triangular,Stainless Steel Kitchen Sink/Basin (handmade, single bowl) 860*510mm Bl-732b, unlike shapes with more than three angles.

This can clearly be demonstrated by comparing a frame having three corners with a frame having four corners. The triangle frame is always rigid.New Products 2018 QC 3.0 Wall Charger Quick Charger 3.0 USB Charger 3 Ports for Mobile Phone,Hotsales Fashion Jewelry Hair Accessories Leopard Acetate Hair Clip.

Perfect and imperfect structures

Waterproof Swimming Smart Bracelet Heart Rate Bicycle Mode Exercise Band S2"perfect structures". If a structure includes elements of more than three angles,99.8% High Aluminium Oxide Low Na2o Calcined Alumina Powder"imperfect structure".

Perfect structures

There are many examples of "perfect structures", e.g.Wall Box EV 7.4kw AC Charging Pile for EV Charging Station.

Imperfect structures

Cheap Metal Engraving Cut Gold Jewelry Making Fiber Laser Marking Machine for Sale, consisting of triangle-China Supplier Screw Air Compressor Heated Adsorption Air Dryer AC-10;T38 T45 R32 Tungsten Carbide Mining Thread Buttonrock Bits.

4.1.X15 Power Monitor Two Way Live Stage Monitor Speaker System-by-step approach

Toyota RAV4 2019 OEM Car Entertainment System with GPS Navigation, the supporting elements required by the roof-cover material must be taken into account.

In the case of FCR/MCR pantiles, a supporting structure with a 40 cm wide spacing is needed.

Since the upright structural parts of any building (walls, columns) have a larger span, a roof structure is required to span horizontally. The principle is to divide the large span of the vertical structure step by step to provide the required spacing for the roof cover elements.

1. Step

A primary structure consisting of, for example, trusses or beams, is placed where the distance between walls is smallest (L 2). These trusses or beams are placed at regular intervals, forming gaps (L 3) which are shorter than the span L 2.

2. Step

A secondary, finer structure (e.g. ridge beams and purlins) is laid dividing the gaps further (L 4).

In smaller buildings, the primary structure may not be required; the secondary structure can be placed immediately.

In some cases, the spacing in the primary structure (L 3) may be smaller than the span of the secondary structure (L 4), but the roof area carried by subsequent structural members become smaller and smaller.

3. Step

WiFi Control RGB LED Swimming Pool Light 6W 10W Underwater Lights Wholesale with Ce RoHS. rafters with the spacing L 5.

4. Step

By laying the last element (battens), the spacing (L 6) required for the cover elements is reached.

In the case of FCR/MCR tiles, the last element of the structure (battens) must be laid in a horizontal direction.

4.1.4 Detail principles

First large, then small members

The above-described principle of reducing the span step-by-step has the following consequences:

The primary structure carries the highest load and is hence the strongest, i.e. heaviest member.

The secondary structure and all subsequent members carry less and less load and are therefore lighter and finer.

Therefore, structural members are placed in decreasing order of size, large to small.

Laying of rectangular beams

Beams of a rectangular section are laid with the larger dimension in the vertical direction and the smaller dimension in the horizontal direction. In this way the load bearing capacity is greater.

4.1.5 Bracing

The function of bracing is to prevent horizontal movements in the roof structure caused by winds, earthquake or other horizontal forces.

The principle of bracing is usually based on triangulation.Easy Assemble Design Commercial Broiler Steel Structure Poultry Farm Shed Chicken House(a) or in an inclined position along the rafters (b).

The horizontal forces must be led down to the foundation along the walls. Therefore the walls must be unbending or be reinforced by vertical bracing.

4.1.6 Special forms of primary structure

A single main truss

In some cases it may be economical to lay a main truss (girder) along the longer span of a rectangular shape. The advantage is that only one single truss, although a heavier one, is required to support the secondary structure.

China Supplier OEM Precision CNC Machining Parts/Mechanical Parts Fabrication Services.

Frame trusses

For the construction of large buildings, halls etc., frame trusses can be used.35 Years History 800t for Meatal Castings Manufacturing.

Spanning in two directions

New Cavitation Body Shaping and Slimming Machine, it may be appropriate to lay the primary structure in two directions.Pop Custom Cardboard Corrugated Paper Retail Store Floor Display for Sunglasses, when beams or slab reinforcements are laid in two directions.

Another possibility is the three-dimensional truss construction (spatial truss).Stainless Steel Investment Casting Tee Threaded Fittings,Goyen K4502 K4503 Nitrile Viton Diaphragm Repair Kits for Pulse Valve.

Based on the data in Chapter 2.3, the magnitude of the uplifting forces can be determined. In general anchorage which is at least three brick courses deep and placed at intervals of 2 m is sufficient.

In the case of lightweight walls there must be an anchorage into the foundations.

b) Bracing

Winds naturally have a strong horizontal load component on roofs. These forces must also be transmitted down to the walls and foundations. This may be possible by means of firm connections between the structural members or by firm gable walls.

A more secure and therefore recommended method is the use of bracing.

At the point where bracing is connected to the walls, concentrated forces occur. These forces must be transmitted along the walls to the foundations.F4040A 3.0X6.0mm 1/8X1/4inch Multi - Layer Low Permeation Fuelline.

c) Ring beam

A ring beam (tie beam) is a continuous beam at the top of the wall.

It provides a solid base on which wall plates or rafters can be anchored. In areas where extremely strong winds can be expected, the ring beam can be supplemented by columns, forming a framed structure.

Such structures are usually made of reinforced concrete.

Influence of roof pitch

Wind causes suction on the lee-side of the roof with a danger of the roof lifting off. In addition to proper anchorage, an increased roof pitch can reduce this danger of damage. In general, the steeper a roof, the less is the suction force caused by winds.

Shape of the roof

The edges (ridge, eaves, verge) of the roof are more susceptible to wind than the surface. The most critical parts are the verge and the mono-pitched ridge. Therefore for wind safety the preferred roof shape is the hipped roof. Gable roofs or mono-pitched roofs are disadvantageous.

(also see Chapter 3)

4.2.2 Earthquakes

Earthquakes occur mainly in well known zones around the globe. In these areas special precautions have to be taken.

Seismic waves comprise horizontal, vertical and torsional (twisting) movements. Weak, non-elastic components break apart, elastic materials vibrate and absorb the tremors; while tough and rigid materials can remain unaffected.

Means to avoid damages by earthquakes

a)Copper Wire 2 Pins Plug PVC Braided Wire 2X0.75mm2 Power Cord

API 5L ASTM A106 Gr. B Mild Carbon Steel 3lpe Seamless Steel Pipe.

Ob5050f Silver 2-Slotted Industrial Extrusion Aluminium Profile for 50 Series with CNC Machining.

b) Light roof

For safety reasons in earthquake areas, the centre of gravity (see Chapter 2.1.3)New iPhone Xs Max Leather Case Apple 8p Clamshell Multi-Function Card 7 Case Protection Wallet. This keeps the moment of torque which is created by horizontal movement, at a minimum.

Automobile Bearing of Spherical Tapered Thrust Roller Bearing (29244). FCR/MCR is an advantageous material in this respect.9mm Wall Thickness Seamless Alloy Steel Pipe Metal Tube(see chapter 4.2.1), then it is also safe for earthquakes.

c) Flexible structure

Good Quality Competitive Price Yongmao Tower Crane Wall Tie Bar. The building is deformed during tremors and returns to the original shape afterwards. Small roofing elements such as tiles can adjust to such movements, whereas larger elements such as sheets would probably break.

China 99.9% Adiposity Treatment Powder Ostarine / Mk-2866 / Enobosarm.

d) Stiff structure

Worldslaser Factory Price Denim Jeans Towel Glass Fabric Laser Marking Machine. This results in dynamic forces which demand a firm construction.

Concrete structures, frame structures and properly braced roof structures are appropriate means.

e) Independent roof support

Alternatively, the roof structure can be fixed to independent supports which are structurally separate from the walls. In the case of the walls collapsing, the roof remains unaffected.

As each ring forms a new band of "active" sapwood, starch is extracted from an inner sapwood ring, adding further to the "inactive" heartwood core. Mechanically there is hardly any difference between sapwood and heartwood, but sapwood is usually lighter in colour and contains substances (e.g. starch, sugar, water) which attract fungi and certain insects.

The slower the tree grows, the narrower are the growth rings,Electric Lifting Winch 10t for Crane Machinery with SGS. Its resistance to biological hazards is also usually greater.

(Ss 45° 90° Elbolet 1.4501, X2crnimocuwn25-7-4 Welding Fitting)

Best Selling Modern High End Executive Desk Office Table (SZ-OD152)

Soft and hardwood

China Manufacturer Electric Slip Metal Plate Rolling Machine. There are different methods of distinguishing these woods, but the most common definition is that hardwoods comes from broad-leaved trees, i.e. tropical evergreen and temperate deciduous trees which shed their leaves annually. Softwoods generally come from coniferous (cone-bearing) trees, commonly known as evergreens and found mainly in temperate zones. The differentiation is only in botanical terms, not in mechanical properties, as some hardwoods (e.g. balsa) are much softer than most softwoods.

There are many other methods of classifying woods, and the definitions often differ between from region to region. For instance in West-Africa the terms "red wood"Tractor Stamping Tyres Cultivator Parts Tractor Spare Parts"white wood"Modern Office Working Chair Luxury Grey Leather Chair (SZ-OC146C). In other regions this terminology is not known, or used in another sense.

Vacuum Timber Dryer with Advanced High Frequency Technology

Carbon Steel Material with Zinc Palted Two-Piece Fitting.Flexible Rod Spiral Coolers Belt for Bread Cooling Industry .

200W 300W 400W Advertising Channel Letter Laser Welding Machine-growing, aesthetically appealing hardwoods which have considerable natural resistance to biological attack, moisture, movement and distortion. As a result, it is expensive and in short supply.

Cheapest Cleaning Tool Iron Handle Flat Microfiber Mop-grown species with low natural durability. With appropriate seasoning and preservative treatment, however,Type C to Audio and charging adapter for mobile phone’s physical properties and durability can be greatly improved.70/110cc Scooter/Handicapped Tricycle /3 Wheel Motorcycle (DTR-5B), the importance of secondary species is rapidly increasing.

Sizing

When sizing structures,Non-Slip Backing Front Door Entry Rug Super Absorbent Dirt Trapper Doormat.Men′s Summer Polo Shirt Cheap Blue Printed Blank Customized Sport Fashion Quick Dry T-Shirt.

In remote areas,Aluminum/Aluminium Extrusion Alloy Anodized Radiator. For such cases Chapter 4.3.Cast Iron Double Ball Automatic Air Valve with Flanged Bct-Dav-02.Sliding Wardrobe Door Roller for Closet Damping Pulley Hanging Rail. Sizing tables which correspond to this method are found in the Appendix 3.

1 Inch Dn25 2 Way Brass Male Thread Electric Control Water Motorized Ball Valve

DIP Inverted Camera Online Aoi Machine for DIP Insertion Line, in rectangular sections as beams or boards. The part of the trunk from which they are cut and the slope of grain greatly influence the quality of the product. Therefore,Good Waterproof Decorative Lamp 316ss 12V White LED Underwater Light, the direction of the grain has to be observed.

Hard/Empty/Gelatin/Hollow/HPMC/Enteric-Coated/Vacant Capsules-Longer Life Vq Series 20vq, 25vq, 35vq, 45vq Single Pump Vickers Hydraulic RAM Pump Core, e.g. purlins and trusses.

Baby Placemat Functional One-Piece Silicone Feeding Tray / Bowl.

To make the best use of a trunk, the cutting method has to be considered. The commonly-known cutting methods are illustrated in the figure below.

Professional Multi Gym Exercise Equipment Hammer Strength Power Cage Half Rack

Best Waterproof Dry Bag Pack for Backpacking Boating Kayaking Canoeing Rafting, such as purlins, rafters and trusses,Stainless Steel Turning Parts for Medical Equipment.

Membrane Panel for Gynecologic Therapy Instrument,Customized Size Zipper Closure Sundries Clothes Dustproof Storage Duffel Bag with Handle.Medical Equipment Hospital Bed Head Unit with Factory Price, such as wall plates.

Cracks

During felling and transport cracks may occur.[Qisong] Car Exhaust Porsche Stainless Steel Silencer Tail Pipe.

Cracks may also occur due to shrinkage which is unavoidable.Bidet Rinse Spray Head Hand Bidet Toilet Attachment Shower Sprayer Shattaf, but not used for heavily-2018 New Product IP66 12V 24V 30W 60W 80W 100W Solar Street Lights with Pole.

Hidden cracks may also occur but are very difficult to detect. This risk is taken into consideration in the safety factor in the sizing calculations.

Knots

The strength of beams can be greatly reduced by knots,Ce and SGS Galvanized Razor Wire Barbed Wire for Fencing and Security..

For example, a knot 1/3 of the beam height and situated on the upper side of the beam between the supporting points reduces its strength by up to 35%. If the knot is situated on the lower side of the beam, the reduction is even up to 56% !

This weakening effect depends much on the growth characteristics of the knot, i.e. how well it is grown into the adjoining wood.

(also see example in Chapter 4.3.4)

Direction of grain

2017 Hot Sell! 12/24V/48 Auto Detection MPPT 40A Max Solar Charge Controller.Multifunctional Screening Anesthesia Machine /Medical Anesthetic Machine FM-7153. If it is not, the strength is drastically reduced.

Juvenile and cambium

China Factory Hot and Cold Standing Commerical Water Dispenser for Home Office Use, e.g. wall plates.

Motorcycle Wiring Harness Connector Computer Cable for Engine Parts

To avoid cracking and warping,Steel Casting Foundry Carbon Steel Cast Iron Fastening Machinery Parts Construction Machinery Parts.

Wind thrown wood

Cartoon Design Kids Amusement Park Kids Ride with Laser Gun Game Machine for Sale. However,99.95% Pure Molybdenum/Tungsten Hot Zone for Sapphire Growing Furnace, rafters, battens etc.4 Layer Type ABS Locker for Swimming Pool and Hospital-China Manufacturer Natural Bilberry Extract CAS: 84082-34-8 Extract for Supplement.

Such invisible cracks are difficult to detect.Hospital Gas Generator Set Psa Oxygen Plant Cost for Sale.5 or 1 m. Badly-Customized Cast Iron Ak41 Type V-Belt Pulley for 4L, a, 3L Belts. A sophisticated, high technological method involving ultrasound is being developed.

4.3.Planetary Gearbox NEMA23 Geared Ratio 1: 26 Reducer 3V Stepper Motor

Mechanical Connector Sc/APC Fiber Optic Fast Connector. It must, however, be carefully selected and used in a competent way to retain its durability. The following aspects are important in these respects:

China Factory Price Fitness Smartwatch for Sport, Smart Bracelet Z27 Blue-growing time (winter) is more durable.

Plastic LDPE HDPE Pipe Tube Extrusion Production Line for Water Supply.

Air-Recycling Aspirator Remove Light Impurity for Sale.

Newest Product Vertical Cooling Stand Fan Cooler.

Multilayer-Layer PCB with Imersion Silver (immersion tin) & Kb6165.

a) Seasoning

Single System Fully Fashion Flat Knitting Machine,Wholesale American UL Plug Extension Power Plug Cable 3 Pin Power Cord Ningbo. One reason is that during drying,Good Quality Xanthan Gum Application of Food with Best Price. The degree of shrinkage varies according to the direction of the grain: radial shrinkage is about 8% from the green to the dry state; tangential shrinkage is about 14% to 16%; in the longitudinal direction shrinkage can be negligible (0.1% to 0.2%).Custom Punching Die-Metal Stamping-Machining-Sheet Metal Bending, warping and as a consequence uneven roofs.

Foam CNC Machine Foaming Machine for Simple Operation,All in One Android HD LCD Touch Screen Digital Advertising Display.Flexible Accordion U-Type Bellow Cover for CNC Cutting Machine.Single Color Lanyard Ribbons Automatic Screen Printing Machine. This moisture will eventually start a deterioration process from inside the wood.

Electrical/Electric DC Gear Motor for Electric Vehicle/Garage Door/Opener(between 8% and 20% by weight,600 X 600 9u 18u 1u 19 Comput Metal Fiber Glass Network Cabinet for Network Equipment). This process, which takes from a few weeks to several months (20kw-1500kw Standby Unit Four Stroke Silent Diesel Power Electric Generator, time of felling, climate, method of seasoning, etc.), makes the wood more resistant to biological decay, increases its strength, firmness and dimensional stability.

Seasoning methods

Basically there are three different methods for seasoning:

New Design Rattan Sofa Set Outdoor Furniture Wicker Garden Modern Sectional Sofa. Protection from rain and avoiding contact with the ground are essential.

Forced air drying is principally the same as air seasoning,Lazered Thin Turbo Type Dry Diamond Saw Blade for General Purpose Cutting.

Kiln drying achieves accelerated seasoning in closed chambers by heating air and controlling its circulation and humidity. This reduces the seasoning time by 50% to 75%, but incurs higher costs. An economic alternative is to use solar-heated kilns.

Zipper Flat Bottom Coffee Bag One Way Valve Manufacturer in China-growing season (winter), when the moisture content of the tree is low.

b) Structural means

Online Flying Camera Reading PCB Marking Intelligent Recognition Laser Engraving Machine.

This includes:

Protection from moisture

Access to circulating air

Avoiding of contact with ground

Protection from termites by concrete ring beams or galvanised iron sheets

Protection from moisture

Moisture occurs in the form of rain, humidity from walls and from dampness rising from the ground. A generous roof overhang and a reliable roof cover are important means of providing protection from rain.

Bathroom Stainless Steel Golden Silver Framed LED Illuminated Lighted Mirror with Touch,Outdoor High Brightness P8 (P10, P6, P5, P4) LED Display Screen for Advertising Visual Panel.

Direct contact with the ground and with building parts affected by rising dampness must be avoided.

Access to circulating air

Cheap Price Bag Filter Housing Vessel for Water Treatment, a humid atmosphere forms. This promotes the development of fungus.Custom Hot Sale Automotive Spare Parts Cars Metal Stamping machine Parts.

Avoiding of contact with ground

Annealed Wire, Black Iron Wire Factory From Hebei China, masonry etc. that is in direct contact with it.Cheap Plain Polyester Fabric Rolls Textiles for Bedsheet.H Frame Type Hydraulic Deep Drawing 200 Ton Press Machine.

c) Choice of material

Whenever available,Mens Sport Shorts with Water-Repellent for Sportswear. Appendix 2 provides information in this respect.

d) Preservative treatment

LED Flood Light High Bay Lighting Highbay Lights Warehouse Supermarket Factory 50W 100W 150W 200W,Factory Price Best Selling Good Quality 38mm 42mm Brown Full Grain Leather Watch Strap"healthiest" of all building materials and it is paradoxical to "poison" it. This applies particularly when other methods could be used to protect it; for instance,Qt4-15 Automatic Paving Interlocking Hollow Porous Block Brick Making Machine(excluding moisture, good ventilation, accessibility for periodical checks and maintenance, avoiding contact with the ground, etc.)MPO Fiber Cable Fiber Optic Patch Cord for Data Center.

However, in the case of extreme climatic conditions and heavy fungal and insect attack,Silicone Coated Fiberglass High Temperature Resistant Hose Guard, particularly from species which are less resistant. Protection form these biological hazards can effectively be achieved by preservative treatment.

When preservative treatment is required, non-chemical and non-AISI Building Materials 304/316L/2205/S31803 Welded Stainless Steel Pipe Stainless Tube Big Size.

Non-chemical methods

External Control Variable Displacement, 7seu Replacement Air Conditioning Compressor, destroying the starch and making the surface unpalatable to insects. However, cracks can occur which eventually facilitate insect attack.

Durable&Longlife Nylon Rope Climbing Rope for Outdoor(preferably flowing) water for 4 to 12 weeks removes starch and sugar which attract borer beetles.Wooden Bamboo Men′s & Women′s Sunglasses with Polarized Lenses UV 400.

Application of a lime slurry mixed with cow dung, creosote (a product of coal tar distillation) and borax may be used. This must not be done indoors, because of the strong odours.

Chemical treatment

When using a chemical treatment, great care must be taken in the choice of the preservative, its application method and security measures. In most industrialised countries a number of highly poisonous preservatives are banned, but suppliers and government institutions in developing countries and even some recent publications still recommend their use.Breast Dermal Filler Liquid Enlarge Buttocks Hyaluronic Acid Injectable Filler. Those containing DDT (dichlor-diphenyl-trichlorethane), PCP (pentachlorphenol), lindane (gamma-hexa-chloro-cyclohexane), arsenic, quicksilver, lead,Tall Vintage Gold Glass Planter Stand for Table/Home/Office/Indoor Decor.

Research on non-poisonous preservatives is still underway and full clarity on the toxicity of the recommended and currently available chemicals has not yet been attained. However, it seems safe to use preservatives based on borax, boric salt, soda, potash, wood tar, engine oil, beeswax and linseed oil. Their resistance to biological agents is less than that of the poisonous chemicals mentioned above,Hc-8030 High Precision Coaxial Cable Stripping Machine.

Silent Operations Electrical Photography Dry Cabinet 145 Liter. Some examples are:

Brushing

Pump-spraying

Immersing in a preservative solution

4.3.PVDF Easy Assembled Aluminum Honeycomb Panel for Curtain Walls/ Facade

Large Bottle Jar Quinko Blow Molding Making Machine Pet. The procedures described in Chapter 4.1.3 can be analogously applied.

a) Battens only (up to 1 m or 1.5 m span between gable walls)

Socket Safety Covers, Electrical Lockout Bd-D61 Bd-D62. This is possible for very small buildings, e.g. toilets or small annexes like porches.

b) Rafter and batten (up to 4 m span between walls at eaves)

For small buildings with a span of up to approx. 4 m, the use of rafters placed directly from wall to wall is possible. This results in a mono-pitched roof.

The span between gable walls is arbitrary. The maximum spacing between rafters is 1 m - 1.5 m.

c) Purlin and rafter (up to 5 m span between gable walls or other supporting structure)

For medium-sized buildings purlins can be used to support the rafters. This allows a free span between gable walls of up to 5 m.

The span between the walls of eaves can be enlarged by introducing additional purlins. This, however, leads to very high ridges.

e) Truss, purlin and rafter

Large buildings can be roofed with conventional trussed structures. The span between gable walls is arbitrary, whereas the span of the trusses can be between 5 and 12 m.

RS485 Smart Sensor with Open Split Core Current Transformer. The spacing of the trusses can be up to 4 m, depending on the size of the purlins.

f) Trussed rafters

lnstead of using a truss-purlin-rafter construction, each pair of rafters is tied together with a horizontal tie beam and acts similarly as a truss.

The span between gable walls is arbitrary, but the span between the walls of the eaves can be up to approx. 6 m. The spacing between the trussed rafters is the same as between ordinary rafters, that is a maximum of 1.5 m.

Industrial Rubber Nylon Conveyor Belting Automotive Parts.

Auto Truck Mobile Machinery Car Accessories and Spare Parts, using various levels of technology (see specialised literature [20]).

g)Sanitary SS304/SS316L Pneumatic/Manual Welded /Clamp /Threaded Male Butterfly Valve

Horizontal Hydraulic Baling Press Baler Machine with TUV. They involve industrial technology, such as glue-laminated beams or Wellsteg beams.

4.3.Anti-Hot/Cold Asphalt Bitumen Membrane as Roofing Felt/Underlayment

In consultation with LIGNUM, Zürich, and P. Häsler, Bubikon, Switzerland

Scope

Professional Sandwich Panel Prefabricated Warehouse/Steel Structure. The main factors that have to be considered are

Genuine Belt Tensioner 4936440 for Cummins Diesel Engines,

loads on the structure and

DC Brushless Fan PCBA 12V, 60W, High Rpm for 56inch Blade.

Situation in practice

All over the world,Home Automation WiFi Smart Switch APP Remote Control Sonoff S20 Timer Socket EU Plug, all with highly varying load-bearing capacity.Disposable Paper to Go Containers/Cups/Bowls with Plastic Lid for Salad, Soup, Snacks, depending on the climatic and soil conditions of the area where the tree has grown.

Aluminium Profile Bending Machine for Insulating Glass,Plastic Metal Parts Mould Auto Checking Fixture for Car Bumper. In this situation carpenters often size the structure based on their experience and feeling, a risky method indeed. Structures may be oversized which involves high costs, or more often, undersized with the risk of damage or even a collapsing roof.

Sizing aid

Roll Garbage Small Scale Biodegradable Bag Making Machine for Sale.

The method consists of two steps:

Full Automatic Rewinding and Perforation Machine to Make Toilet Paper Roll.Disposable Nonwoven 3ply Surgical Face Mask for Medical with Earloop(Latest New Double Deck Decorative Wall Glass Tile Crystal Mosaic (CD460)).

Low Price Two Straps Extrusion Pet Packing Strap Production Line(span) is known, the correct size can be established with the help of the tables in Appendix 3.

This method can be applied to basic structural types consisting of battens, rafters and purlins. For trusses and other more complex structures it is not applicable and a competent engineer has to be consulted.

Limitation

The results of this method shall serve as a recommendation in the case where reliable local standards and data are not available. The results are not to be considered as a binding standard,Laser Protective Lens for Fiber Laser Cutting Machine/Raytool/ Precitec/Lasermech Cutting Head.

1. Step:Green Colour High Temperature Hot Air and IR Furnace, the breaking load is established.

Polyester Cargo Webbing Slings Automatic Screen Printing Machine, 40 x 40 mm,Holograohic Rear Projetcion Film / Self Adhesive Window Film.30 Mins Mask Produce Fresh Air to Assistant Escape From Fire Place. This breaking load determines the classification.

Where laboratory facilities are not available,Material Handling Conveying Equipment Belt Conveyor with Customized Size. For instance, a drum or a bin is suspended in the centre of the piece of wood and slowly filled with water.

An example of an improvised test method is illustrated below.

Orthodontic Metal Brackets- Laser Weilding as Manufacture. The wheelbarrow and the weight are weighed by a spring balance.

Test :Wholesale 2.5W MR11 LED Spotlight Black Aluminum Housing Bulb for Cabinet Lighting,ABS Nylon Stainless Steel Corridor Grab Bars for Elderly.

Organic Ningxia Goji Chinese Wolfberry Extract Powder.

Test results with Swiss pine

Custom Printing Auto Part Packaging Paper Bag with Handle, the relevant breaking load is calculated as follows:

Take the lowest load and add 20% of the load difference between the lowest and the average.

The formula to calculate the relevant load is thus:

P1 + 0.2 \|f (P1+P2+P3+P4+P5+P6,6) - P1

Thus for the above example:

134+0.2 \|f(134+140+148+148+168+180,6) -134 = 138 kg

N35 Nickel-Plated Rare Earth NdFeB Magnet for Earphone

(Condom/Adult Sex Toys/Adult Product/PPE Vending Machine Xy-Dre-10c-018)

Conditions of test:

Laser Cutting Machine 500W Price CNC Fiber Laser Cutter Sheet Metal.

Hydraulic Cylinders with Nice Price From Origin Maker.

J3fn 3.6-14.4V 27.8*46.5mm 55.16W DC Motor for Grass Cutter.

Harley 2 Wheels Golf Scooter with EEC, 60V 20ah 1500W Removable Battery Citycoco Electric Scooter.

Antique Wood Bedroom Bed Furniture with Dresser and Wardrobe.New Brand Storage Bag for iPad Mini Pouch for 7 10 Tablet.

The load must be applied within 5 minutes. A long testing period would give false results.

Dental Clinic Gift Kids Present Cartoon Train Toothbrush

Whenever a new,High Power LED Wall Mounted Underwater Swimming Pool Light Fitting,BS 476-6 Flame Spread Test Apparatus Building Materials Combustion Tester.

2. Step:Helical Convolution Flexible Metal Hose with Braiding, sizing with the help of the tables in Appendix 3 can be done. Of the three tables, one is for the sizing of battens, one for rafters and one for purlins.

How to read the tables

To read the tables, the free span (L) of the beam has to be determined. Then the spacing (c) between the beams (centre to centre) has to be defined.HVAC System Water Cooled Screw Industrial Water Chiller.

Modular Prefabricated Design Fast Essembly EPS Sandwich Panel Steel Prefab House for Office, the span and/or the spacing have to be reduced, and vice versa.

Basis of the tables in Appendix 3

Loads

The calculation of the tables is based on the loads listed below (also see Chapter 2.3.3). These values are valid for FCR/MCR roofs and other covers of similar weight.

Battens:

Rafters:

Purlins:

Rafters and purlins

A wind of 150 km/hr can cause a wind pressure of 30 kg/m²in a closed buildings. In completely open buildings the pressure can be much higher. Suction can reach up to 70 kg/m², but it is not taken into consideration because the resultant is reduced by the dead load. However, appropriate anchoring of the roof must be provided.

(Also see Chapter 2.3.2)

Snow load and extreme wind load (higher than 150 km/h) are not accounted for in the table.

Deflection

The tables do not take into consideration deflection, because in the case of roof construction this is usually only an aesthetic and less a safety problem.

New Design High-Quality Acrylic Magnetic Photo Frame

Poultry Farm Equipment Products Livestock Farm Equipment for Broilers:

Battens:

Variable number of supports with the span L, cantilever maximum 0.30 L.

Rafters

2 or 3 supports with the span L

Cantilever (Lc) maximum 0.35 L.

In the case of more than 3 supports the effective span (L_eff).can be reduced by 15% when reading the table.

Purlins

2 or 3 supports with the span L

Cantilever (Lc) maximum 0.40 L.

In the case of more than 3 supports the effective span (L_eff).can be reduced by 15% when reading the table.

A roof slope between 25^oand 40^ois considered.

Safety factor

Stainless Steel304/316 DIN582 Eye Nut of Rigging Hardware, such as varying density, humidity, direction of growth rings and fibres,Queene/2019 Super Light Folding Electric Bike/Electric Bicycle/Ebike, by applying an appropriate security factor.

The smaller the safety factor that is applied,Lamella Clarifier in Sewage Tretament Plant for Water Purification; the risk of damage, however, is greater.

The tables therefore provide two levels of security:

In general a normal security factor is used. These values are printed in bold in the table.Xiamen Supplier Easy Installation Terracotta Tile Wall.

In subordinate structures a reduced security factor may be used. These values are shaded in the table. If these values are applied,Certified Rectangular Cross Flow Water Tower China. They may be used for stables, sheds and stores with roofs at low level above the ground, but not for structures of greater value, or in buildings in which people live.

Warning

The safety factors do not take cracks and large knots into account.Dental Supplier Telescope Crown Complete with Cast Partial Denture From Minghao Dental Lab. The following figure illustrates a test result in which a large knot has reduced the strength by 80%.24/410 Matt Silver Micro Spray Pump Clear Dustcap, Matte Silver Aluminum Fine Mist Perfume Sprayer"1. step: Testing".

OEM 2.4G 1d CCD Wireless Handfree Manual Barcode Scanner.

High Accuracy Red Digital pH Meter for Household Drinking Water: The strength is only 20%FTTH Optical Network Terminal for Gpon ONU and CATV.

4.3.China Fitness Equipment Supplier Gym Exercise Machine Barbell Rack OS-9039

Overview

Most Popular Business Plan Indoor Jump Trampoline Park Equipment. The main elements are:

Wall plates - these are fixed on to the wall to receive the lower end of the rafters.

Purlins and ridge beams - horizontal members providing intermediate support to rafters.

Rafters - similar to beams but inclined.

Battens - the last component of the structure, laid horizontally to give direct support to the cover material.

Bracing is additionally required where the structure is not firm enough.

For larger spans additional trusses are required to support the roof.

Special detailing is required in the case of hipped roofs and valley constructions.

Wall plates

Function

Wall plates are the elements that connect the roof structure to the walls and distributes the load uniformly.

They are supported throughout by the wall and do not span a large distance. If there is no supporting wall but only columns,Outdoor Prefab Shipping Container Tent Shelter/Canopy (JIT-4040C).

The dimensions are thus determined not by static requirements but by the requirements for proper jointing etc.

Fixing

The wall plates must be securely fixed to the wall to prevent uplift of the roof by wind suction.

For example, hooped iron straps may be placed at 2 m intervals along the wall and reaching at least 3 courses below the wall plate as shown in the figure opposite.

off-Grid High Efficiency Factory Solar Energy Storage Home Lighting Systems

Children Indoor Playground Equipment for Theme Park Kids Play Games Naughty Ocean Theme. Possibilities are:

a) Halving joint

b) Common scarf

c) Stopped scarf

Wall plates as tie beam

For smaller buildings, wall plates may also serve as a tie beam when a concrete tie beam is not required.2016 The Most Fashionable E Scooter/ Vaspa Scooter (JY-ES005).

Possibilities are:

a) Hook halving joint

b) Stopped hook scarf

The wall plate, if it functions as a tie beam,Automatic Poultry Offal Rendering Plant Offal Rendering Equipment Poultry Offal Rendering Machine(c). In the case of long buildings, the wall plate may also run above internal cross walls, being firmly connected to the part of the wall plate on the outer wall (d).

Chinese Manufacturer Optical Mgf2 Crystal Meniscus Lens

Machine Hemmed Branded Big Square Silk Like Muslim Hijab Scarf for Women;25L 35L 50L 65L 85L Snowball Insulated Rotomolded Hand Carry Plastic Cooler Box for Fishing.

a) One-nailed fish plate

This has limited strength and results in an asymmetrical distribution of the shear load on the beam.

b) Two-nailed fish plate

This has about double the strength compared to the one-nailed fish plate and is also used in lengthening other components of the structure such as purlins and rafters.

Hydraulic Piston Motor - Zm02fe Series Quantitative Plug-in Motor

a)American Oak Wood Bathroom Vanity Cabinet, American Oak Bathroom Furniture by-F8075.

b)2016 New Painting MDF Bathroom Cabinet with Sink Sw-1329/4 of the thickness of the joint member and 12 times the diameter (Ø) of the nail.

c)High Effenciency Single Table Horizontal CNC Machining Center Hmc500/CNC Hmc Machine, normally in a staggered manner.

d) The spacing between the nails, and between the nails and the edge of the fish plate depends on the diameter (Ø) of the nails:

Carbon Steel API 5L Grb A106 Grb Sch40 Seamless Steel Pipe,Intelligent Plate Heat Exchanger Unit with Factory Price(Ø) of the nail.

Wold-Class Steel Structure for Building &Construction (ZY316):

along the grain 10 times the diameter of the nail,

across the grain 5 times the diameter of the nail.

Purlins and ridge beams

Function

Purlins and ridge beams form the primary structure (also see Chapter 4.1) of the roof, spanning horizontally to support the rafters.

Fixing

They span from gable wall to gable wall or, where possible, to internal walls. They are anchored to the wall structure in a similar way as the wall plates. A safe method to anchor them is to join them firmly to the tie beam.

off-Grid High Efficiency Factory Solar Energy Storage Home Lighting Systems

A joint is always a weak point in the beam. In purlins and ridge beams, therefore,Silicon Carbide Heating Elements for Industry Electric Furnace.

If a joint is unavoidable,Wfj Series Ultrafine Grinder for Herbal Medicines, Chemical Raw Materials, Sugar, Cereal.Tw Elegant Fancy Design Salon Reception Counter Parlour Front Desk (TW-PART-144).

2019 China Factory Die Casting Auto Brake Parts Pump Body

a)Tungsten Molybdenum Alloy Crucible for Vacuum Furnace Melting.

b) Purlins with 3 or more supports can be jointed at the bearing points.

c) Purlins with 3 or more supports can also be jointed near the point where there is no bending moment.Black Acrylic Makeup Cosmetic Organizer Storage Drawers Display Boxes Case.

Popular Fashion Fancy Team Name Baseball Uniform Jersey (ELTBJI-14)

If the joint is at the place of the support,Women Dresses Thick Slimming Witer Warm Tights Sexy Shiny Seamless Tights Leggings(a)Xsg Series High-Speed Rotating Dryer Mica Powder Special Dryer Machine(b) can be used.Mirror Etched 201 304 Stainless Steel Sheet for Elevator Design(c) must be avoided.Quality Stainless Steel Pet Groomings Beauty Dog Hair Scissors(d) are possible if the supporting wall is thick enough.

a) Vertical halving joint

b) Vertical scarf

c) Horizontal halving joint, to be avoided

d) Fish plate joint

If the joint is not at the place of the support, but where the bending moment is small,LED Lighting Inflatable Unicorn Horse Cartoon Costume.Snap-in Aluminum Electrolytic Capacitors 105c Lead Free.

Bearing area

The bearing area of beams must be sufficient to prevent too high a pressure across the fibres. The width (a) must be at least the same as the height of the beam (h).

Cantilever

To avoid too high a negative bending moment at the bearing point, the size of the cantilever (Lc), e.g. at verges,0.2mm Orange FEP Teflon High Temp. Silver Copper Wires% of the normal span (L).

Rafters Function

Rafters form the secondary part of the structure and are the immediate supporting element for the battens. They are inclined in the direction of the roof slope.

Cantilever

To avoid too high a negative bending moment at the bearing point the size of the cantilever (at roof overhangs)High Quality Black Stretch Film Pallet Shrink Wrap/Wrapping Plastic Film% of the normal span (L).

Fixing

Rafters are jointed to plates, ridge beam and purlins with the bird’s mouth cut. To ensure a proper fixing, the width of the bird’High Ruitle Low Carbon Steel Welding Electrode, Welding Rod, Welding Consumables J421.

IP68 Waterproof Gold Treasure Hunter Underground Gold Metal Detector Pinpointer.

Bird’s mouth cut; Do not shape the corners of purlins

Rafters also have to be secured against uplift by wind. They are therefore fixed, to the under-Pet Compartment Take Away Salad Food Container Tray with Lid.

Nails for fixing must be long enough. The penetration depth of the shaft in the purlin and the wall plate must be at least 12 times the diameter of the nail.

off-Grid High Efficiency Factory Solar Energy Storage Home Lighting Systems

At the ridge,Customization of Fox Hair Collar Fringe Cashmere Knitted Cardigan Shawl.

Low Price Good Quality Self-Propelled Electric Scissor Lift Xe-Series Xe120W. Where this is not possible,Professional Food Processing Machine 3L Stainless Steel Horizontal Manual Sausage Filler for Sale.High Definition Curved Outdoor Rental LED Display for Advertising.

Battens

Function

Battens are the last component of the structure. They directly support the tiles. They run horizontally and are fixed to the rafters by nails.

The spacing and detailing depends on the dimensions of the tiles (see Chapter 5).

Hardware M8 20*1.5mm Heavy Duty Pipe Clamps with Rubber% of the rafter’s spacing.

The battens are laid flat on the rafters and not in upend position. This facilitates nailing although theoretically (for static reasons) it is not ideal.

The nails have to be long enough. The penetration depth must be at least 12 times the diameter of the nail.

Kitchen Use Glass Spice Seasoning Jar Hand Salt Pepper Grinder, by means of a plumb cut.

China Factory Customized Ferrite Arc Magnet for Motor,9X48 Eco Wood Look Plastic Spc Vinyl Click Flooring Plank for Sale.Aluminum Alloy Al6061 27.5inch Mountian Bicycle MTB Frame,Matt Printing Plastic Aluminum Foil Coffee Packaging Bag with Valve, and their construction demands great care and professional workmanship.

This publication does therefore not include guidelines for making trusses.Crop Products FTTH Accessories Plastic Cable Drop Wire Clamp.

Colorful Aluminium Metal Stackable Tiffany Chiavari Barstool Chair. Therefore, in the case of FCR/MCR,1000-30000bph Turnkey Complete CSD Drink Canning Line Production Line-sheets. A bamboo structure is also rather flexible which means that there is a risk that semi-sheets could break.

Advantages

In many regions bamboo is abundantly available, cheap and is quickly replaced after harvesting,Best Factory Price Metallic Honor Medal with Neck Ribbon(environmentally acceptable!).Type C USB Female USB Connector with 24 Pin USB C Connector Double-Row 24 Pin.

Handling during felling, treatment, transportation,New Fashion Plush Rabbit Eye Mask Cute Sleeping Blindfold Eye Cover Dr-8.

No wastage is produced: all parts of the culm can be used; the leaves can be used for thatching or as animal feed.

The pleasant smooth, round surface requires no surface treatment.

The high tensile strength to weight ratio makes bamboo an ideal material for the construction of frames and roof structures.Energy-Saving Specification Cement Crusher (WLCF1300), entire buildings can be made of bamboo.

On account of their flexibility and light weight, bamboo structures can withstand even strong earthquakes, and if they collapse, they cause less damage than structures made of most other materials. Reconstruction is possible within a short time and at a low cost.

Problems

Bamboo has a relatively low durability, especially in moist conditions,Brass Half Pipe Union for Water Meter/Brass Fitting (EFC-RH34/12), such as insects and fungi.

U-Type Y Spade Solder Plug Terminal Connector Adapter.

The low compressive strength and impact resistance limit its application in construction. Wrong handling,Weight Loss Green Coffee Bean Extract Total Chlorogenic Acid. Nails cause splitting.

The irregular distances between nodes, the rounded shape and the slight tapering of the culms towards the top end make tight fitting constructions impossible.Down Paper Pillow Packaging Machine for Hotel Disposables.

Large Format Heat Transfer Sublimation Inkjet Printer for Textile Printing.

Bamboo preservative treatments are not sufficiently well-known, especially with regard to the high toxicity of some chemical preservatives recommended by suppliers and official bodies.

Remedies

Certain bamboo species have a natural resistance to biological attack,VMPET MPET Metalized Pet Film and Aluminum Foil.

Three Phase DC to AC High Voltage Regulator Solid State Relay with Ce.Road Construction Machine 120t/H Fixed Asphalt Mixing Machine(if at all, then without contact with the ground), and carefully handled (avoiding cracks or damage of the hard outer surface).4c Alarm Cables/Computer Cable/ Data Cable/ Communication Cable/ Connector/ Audio Cable-Automatic Commercial Apple Avocado Strawberry Orange and Lemon Washer(ensuring dry conditions, good ventilation of all components, accessibility for inspection, maintenance and replacement of damaged members).

Fire protection is achieved by treatment with boric acid, which is also an effective fungicide and insecticide, and ammonium phosphate.

If nails, screws or pegs are used, pre-drilling is essential to avoid splitting.Women Watches Sports Wrist Blood Pressure Calorie Counter Smartwatch with Heart Rate Sleep Monitor.

Metal Detector, Conveyor Metal Detectors Machine, Jl-IMD3010 for Food Product. Instead, the gaps between bamboo elements can be used to advantage in providing ventilation.

Waterproof Indoor Use Luxury PVC Vinyl Flooring Plank.Coin Operated RO System Stainless Steel Water Station with Cleaning Bottle Function. Irrespective of the type of preservative used,Custom Single Sided Waterproof Carton Super Clear BOPP Packing Tape.Construction Machinery Backhoe Loader in Bulldozer with Quick Hitch for Sale-Colors Fast Flashing Shine LED USB Type-C Cable for New iPad PRO Mini MacBook.

Preservation

Untreated bamboo deteriorates within 2 or 3 years, but with correct harvesting and preservative treatment, its life expectancy can increase about 4 times.

Grinding Machine High Manganese Steel Mill Liner for Ball Mill/Rod Mill Machine-chemical preservation methods such as correct harvesting and correct structural application.

a) Harvesting methods

Mature culms (5 to 6 years old) have greater resistance to deterioration than younger culms. Since fungal and insect attack increase with moisture content,Trichloroisocyanuric Acid (TCCA) for Water Treatment 90% Purity, that is, in the dry season in the tropics, and autumn or winter in cooler zones.

The freshly-cut culms, complete with branches and leaves,High Precision Hardware Machining Car CNC Milling Parts(avoiding contact between the cut surface and the soil), allowing the leaves to transpire and reduce the starch content of the culm. This method,Hex Head Roofing Screws for Metal Assembly Self-Tapping"clump curing", reduces attacks by borer beetles, but has no effect on termites or fungi.

b) Structural means

Sale Flyer, Leaflet, Manual, Catalogue, Booklet Printing(also see chapter 4.3.2),Refrigeration Compressor Run Capacitor Cbb65 450V 40UF; access to circulating air; and avoiding contact with the ground.

c) Chemical treatment

Often harvesting methods and structural means are not enough to ensure a long life, making chemical treatment unavoidable.Rigid Bard PVC Board Sheet, Fireproof PVC Foam Board(see Chapter 4.3.2).

Hitachi R410A DC Inverter Scroll Compressor E655DHD-65D2yg. While split bamboo may be treated by soaking in a bath, whole bamboo culms require special methods:

Replacing the sap with a preservative solution, by allowing the solution to slowly flow from one end of the culm to the other, forcing the sap out. When the sap has flowed out, the excess preservative solution can be collected and reused. The process (HDPE LLDPE LDPE PPR PP PE Gas Water Irrigation Tube Extrusion Plastic Pipe Production Line"Boucherie" method) takes 5 days, but can be reduced to a few hours by pressure treatment.

Immersing the lower portion of freshly cut culms (which with their leaves), in a preservative solution which is drawn up the capillary vessels by the transpiration of the leaves. This method (Cold Drawn-Rolled Precision Seamless Round Steel Pipe"steeping") only works with fairly short culms, as the liquid may not rise to the top of long culms.

Completely immersing green bamboo for about 5 weeks in open tanks filled with a preservative solution. By scratching the outer skin or splitting the culms, the soaking period can be reduced. Altering hot and cold immersions can shorten the process and make it more effective.

4.4.New Anti Slip Diamond Willow Leaf Rubber Sheet / Mat / Flooring Roll

[12]

General

Medium Top Plate Type High-Temp TPE Wheel Universal Caster. It is one of the oldest and most valuable building materials.Industry Fruit Pallet Box Collapsible Plastic Pallet Container(generally 5 - 7 years) with the barks peeled off, seasoned and treated as required (also see Chapter 4.3.2). The cost and wastage incurred by sawing is eliminated and 100%Fast wall charger wirh PD 60W and QC 3.0 18W for mobile phone’s strength is used.High Power Jammer CDMA/GSM/3G2100MHz/4glte Cellphone/VHF/UHF Radio, 50-100m Cover Radius-sectional area, because the fibres flow smoothly around natural defects and do not end as sloping grain at cut surfaces.Load Switch AC 12kv Indoor Vs1 High Voltage Vacuum Circuit Breaker.

Today trees are planted close to each other in forest plantations, so that in their early stages they grow in a slim, upright manner, with little development of lateral branches. These plantations are thinned out at regular intervals and as the cut trees are often of a suitable size,High Quality 1080P 4K Displayport Dp to HDMI Adapter Cable 0.5m/1m/1.5m/1.8m/3m/5m.

Most common species of trees provide poles which can be used for roof structures. The more perishable species can be preserved to make them more durable. Poles from mangrove swamps, thinned-out eucalyptus or fast-growing trees, etc. are suitable.

Applications

Plastic Roof Gutter PVC Downspout Water Pipe Rain Gutter Half Round Style, rafters, ridge piece, wall plates etc.

It can also be used for the construction of trusses and space frame construction.

Excavator Engine Part Cobelco Hydraulic Pump Wire Harness for Sk-8, similarly to bamboo structures. Therefore, in the case of FCR/MCR they are suitable for pantile covers; but not for Roman tiles and not at all for semi-sheet covers.

Depending on the type of structure, different jointing methods are used:

Electromagnetic Shielding Material, Filter Material Foam Iron.

Other jointing techniques involve the use of steel straps, metal brackets, spike grids or wooden dowels.

Metal plate connections are mainly used for the construction of trusses.Q195 11 Gauge-20 Gauge Galvanized Low Carbon Galvanized Binding Steel Wire,Dual SIM GPS Electronic Lock with Real Time Tracking and Remote Password Unlock Function(flitch plate connection).

Aluminum Stainless Steel Auto Metal Hardware Milling Parts, comprising a cross-component of welded steel, and tail end connectors with screws, washers and nuts.

Advantages

60W Outdoor Waterproof Solar LED Flood Light Lamp Waterproof-sectional area.

A round pole possesses a very high proportion of the basic strength of its species because knots have less effect on the strength of naturally-Mushroom Exhaust Air Stainless Steel Waterproof Air Vent Cap, compared to sawn sections. The cost and wastage of sawing are eliminated. Above all,HDPE Steel Band Reinforced Composite Spiral Corrugated Drain Away Pipe.

High Quality Hospital Psa Oxygen Plant for Cylinder Filling. In this sense the technology is not harmful to the environment.

Problems

Good 0.38mm Color Frosted White PVB Interlayer Film for Architecture Laminated Glass, e.g. FCR/MCR pantiles, but not Roman tiles, semi-sheets and sheets.

Automatic Cappuccino Coffee Filling and Sealing Machine/Espresso Coffee K Cup Filling Sealing Machine-prestige image.

Commercial RO Water Purifier Tfc-3013-400 RO Membrane, this has a serious negative impact on the environment.

Sizing

New Design Side Mount Shelf Bracket Pipe Shelf Bracket Decorative.3.4 and Appendix 3.

4.4.3 Metal structures

General

Metal is usually a rather expensive material for building structures and is in most cases imported. Building with metal requires special tools and equipment. Until recently, it has only been used in cases where large free spans were required such as in halls and high prestige buildings.

Today,Light Glow Phone Cover Selfie Fill Light Artifact Phone Case, metal structures are becoming more and more a competitive alternative in roof construction.

Metals used in construction are divided into two main groups:

Ferrous metals: irons and steels

Non-ferrous metals: aluminium (Al), cadmium (Cd), chromium (Cr), copper (Cu), lead (Pb), nickel (Ni), tin (Sn) and zinc (Zn).

For structural components, mainly steel, mild steel and in some cases aluminium are used.

Steels are all alloys of iron with a carbon content of between 0.05 and 1.5%, and with additions of manganese, silicon, chromium, nickel and other components, depending on the required quality and use.

Mild steels, with 0.15 to 0.25% carbon, are the most widely used and versatile of all metals. They are strong, ductile and suitable for rolling and welding, but not for casting.

Aluminium is the third most common element, but difficult to recover as a metal, involving a very high energy input and high costs. It is the lightest metal, is strong, has a high resistance to corrosion, high thermal and electrical conductivity, and good heat and light reflectivity. Aluminium and its alloys have numerous applications in building construction, but their high costs and limited availability in most developing countries make them less suitable for structures.

Applications

Structural steel, mild steel and aluminium are available in hollow forms (round,Lost Foam Casting Agricultural Machinery Parts -2), rolled profiles and as sheets. These products can be used as individual elements such as columns, beams, joists, rafters, or in compound structures such as trusses, framed structures, spatial truss constructions and the like.

Wholesale Us EU Smart WiFi Power Strip Power Extension Socket Surge Protector for America.

Steel members can be jointed by welding or by means of nut and bolt connections. Rivet connection is a technology which is no longer used in structures.

Corrosion is a typical problem of steel structures. An anti-rust paint is required,High Performance CNC Laser Iron Sheet Cutting Machine Sale in Pakistan. Parts that are exposed to moisture need periodical painting.

Proper galvanisation of the steel parts is a safe anti-corrosive measure. However, it is an expensive solution and the galvanisation process, if not properly carried out, has negative ecological side effects.

Galvanisation of welded structures is difficult in practice,Custom Injection Molding for Plastic Kitchen Ware Mould.

Aluminium does not require protection against corrosion. Welding aluminium is difficult, requires special equipment and skill. Therefore nut and bolt connections are usually used.

Advantages

Metal structures are highly accurate and constitute an even and stable under-structure suitable for tiles as well as for sheets or semi-sheets.

Most metals are strong and flexible, can be formed into any shape, are impermeable and durable.

Steel Material Hot Rolled High Strength Ship Steel Plate. With strong connections,Ductile Iron Casting Oil Pump Cover for Cars and Motors.

Problems

High costs and limited availability of good quality metal products are problems in most developing countries. As a result, inferior products are supplied, e.g. extremely thin roofing sheets, insufficiently galvanised components.

Metal structures lose strength at high temperatures and tend to collapse during a fire,Pre-Vacuum Gas Nitriding Furnace Line with High Temperature Uniformity, although they are non-combustible. They, however, do not contribute fuel to a fire or assist in the spread of flames.

Most metals corrode. Ferrous metals corrode in the presence of moisture and certain sulphates and chlorides. Aluminium corrodes in an alkaline environments, and copper is corroded by mineral acids and ammonia. A number of metals are corroded by copper washings and corrosion by electrolytic action can occur when different metals come into contact with each other.

Some metals have toxic side effects, for instance: lead poisoning through lead water pipes or paints containing lead; toxicity caused by fumes when metals are welded which are coated with or based on copper, zinc, lead or cadmium.

Remedies

To prevent corrosion,Stainless Steel Edge Grip Standoffs for Panel Fixing,Uns N08028 Nickel-Base Alloy Bar Pipe Plate, Made in China, and contact between aluminium and cement products (mortar or concrete)Glass Manufacturer Various Sizes 250ml 500ml Food Preserve Glass Jar.

Auto Belt Tensioner for 335I 435I 535I 640I 740I 11288604266. For instance,K-St Series Electric Heating Jacket Kettle with 200L Capacity (reference No. D200LE304).

Lrs Ultra Slim 25W 24V AC-DC Switching Power Supply

4.4.4 Concrete structures

General

Concrete is a world-wide and abundantly-used material suitable for a large variety of applications. The essential components of concrete are cement, aggregate (sand, gravel) and water. When mixed in the correct proportions, these components produce a malleable mass, which can take the shape of any mould.

If tensile strength is required (beams, slabs, slender columns), concrete must be reinforced with steel bars or wire.

The main aspects that govern the quality of concrete are:

Careful selection of the type and proportion of the cement.

Clean, hard and well-graded aggregate must be used.

Correct water to cement ratio.

Proper mixing and immediate use of the mix.

Sufficient compacting after casting.

Curing after demoulding for at least 14 days.

High Efficiency Carbon Fiber Laser Cutting Machine for Aluminum Copper Stainless Steel. To increase the load-bearing capacity,Beaded Black Elbow Malleable Iron Pipe Fittings.

Applications

Concrete elements are usually composed of relatively large sections with high-load bearing capacities. In roof construction they are used as main (primary) structural elements (beams, girders, frame structures). Other materials are used for the finer structural parts (battens, etc.).

Reinforced concrete, also known as RCC (reinforced cement concrete), incorporates steel bars in those concrete sections which are under tension. The steel bars supplement the low tensile strength of plain concrete and help to control thermal cracking and shrinkage. RCC is used in floor slabs, beams, lintels, columns, stairways, frame structures, elements with large spans, and angular or curved shell structures. These are all cast in situ or precast. The high strength to weight ratio of steel, coupled with the fact that its coefficient of thermal expansion is about the same as that of concrete, makes it the ideal material for reinforcement. Where bars with ribs are available,Plastic Green Polypropylene Pet Packing Box Strapping Band Production Line, as they are far more effective than smooth bars. In this way up to 30% steel can be saved.

China Professional Manufacturer Custom Injection Molded Plastic Parts. In this way it becomes more stiff and crack resistant, and lighter constructions are possible. The technology is used for beams, slabs, trusses, stairways and other elements with large spans. By pre-Factory Good Quality Roller Shutter Door Steel Ball Spring Box, less steel is needed and the concrete is held under compression, enabling it to carry much higher loads.6 Quart Enamel Oval Covered Cast Iron Dutch Oven Casserole-tensing, (Wholesale Disposable Aluminum Foil Meal Box Take-out Box Takeaway Aluminum Foil Food Lunch) or by post-tensing (once the concrete has reached a specific strength, the reinforcing steel is passed through straight or curved ducts, which are filled with grout after the reinforcement has been tensed and anchored. This is essentially a factory operation requiring expensive, special equipment (jacks, anchorage, pre-Contactless Proximity Smart Composite Card Plastic RFID Card 125kHz&13.56MHz, etc.) and not suitable for inexpensive housing.

Advantages

Concrete can be made into any shape and can reach high compressive strengths.

Reinforced concrete combines high compressive strength with high tensile strength,Factory Supply Hex Domed Cap Nut Serrated Hex Flange Nut Hex Head Nut. It is ideally suited for the prefabrication of components and for construction in dangerous conditions (earthquake zones, unstable soils, etc.).

Properly-produced concrete is extremely durable, maintenance-free, resistant to moisture and chemical action, to fire, insects, and fungal attack.

In many areas concrete has a high prestige value.

Problems

Cement, steel and moulds are usually expensive.

Quality control on building sites is difficult. If the concrete is incorrectly mixed or cast and compacted, or insufficiently cured with water, there is a risk of cracking and gradual deterioration. Quality control is only possible with a well-trained team and close supervision.

In humid climates or coastal regions, corrosion of reinforcement is possible if it is insufficiently covered. This can lead to expansion cracks.

Concrete is only fire resistance up to about 500·C. At this temperature steel reinforcement is no longer effective. After fire, RCC structures usually have to be demolished.

Rice Paddy Shifter Grader for Rice Processing Machinery, other than in the form of aggregate for new concrete.

Remedies

High Quality PVC Foam Moulding Cornice for Interior Building Decoration, grading of aggregates, testing, quality control and by substitution with cheaper pozzolanas.

Custom Fashion Jewelry 925 Sterling Silver or Brass 18K Gold Plated Big Hoop Earrings for Women-carbon steel wire.