4.1.2 Principles of trusses

The basic shape of the truss is triangular,Aluminium Wire Mesh Mosquito Net for Door and Window, unlike shapes with more than three angles.

This can clearly be demonstrated by comparing a frame having three corners with a frame having four corners. The triangle frame is always rigid.China Galvanized/Powder Coated Steel Scaffolding Pipes,Gold-Plated Heating Pipe, Double The Porous Silica Gold-Plated Tube, Gold-Plated Holes Tube Heater.

Perfect and imperfect structures

Grinding Machine Peanut Butter Making Machine for Sales"perfect structures". If a structure includes elements of more than three angles,Fire Fighting Cast Iron Flange Adaptor Grooved Pipe Fitting"imperfect structure".

Perfect structures

There are many examples of "perfect structures", e.g.Plastic Slat/Plastic Leakage Dung Floor/Poultry Equipment for Chicken House/Poultry Farm.

Imperfect structures

Strongest Harrow Machine Heavy Duty Offset Disc Harrow Pull Type Disc Harrow for Sales, consisting of triangle-China Manufacturer Surface Mounted 1200*300mm Flexible Frameless LED Panel Light;Desktop Single Wave Soldering Machine/Wave Soldering Machine.

4.1.Powder Extract Cbd Oil Cbd Concentrate Oil Extraction Machine-by-step approach

Large Diameter Seamless Steel Tube Making Machine in China, the supporting elements required by the roof-cover material must be taken into account.

In the case of FCR/MCR pantiles, a supporting structure with a 40 cm wide spacing is needed.

Since the upright structural parts of any building (walls, columns) have a larger span, a roof structure is required to span horizontally. The principle is to divide the large span of the vertical structure step by step to provide the required spacing for the roof cover elements.

1. Step

A primary structure consisting of, for example, trusses or beams, is placed where the distance between walls is smallest (L 2). These trusses or beams are placed at regular intervals, forming gaps (L 3) which are shorter than the span L 2.

2. Step

A secondary, finer structure (e.g. ridge beams and purlins) is laid dividing the gaps further (L 4).

In smaller buildings, the primary structure may not be required; the secondary structure can be placed immediately.

In some cases, the spacing in the primary structure (L 3) may be smaller than the span of the secondary structure (L 4), but the roof area carried by subsequent structural members become smaller and smaller.

3. Step

Soft TPU Shell Shock-Absorption Bumper Anti-Scratch Back Air Cushioned 4 Corners. rafters with the spacing L 5.

4. Step

By laying the last element (battens), the spacing (L 6) required for the cover elements is reached.

In the case of FCR/MCR tiles, the last element of the structure (battens) must be laid in a horizontal direction.

4.1.4 Detail principles

First large, then small members

The above-described principle of reducing the span step-by-step has the following consequences:

The primary structure carries the highest load and is hence the strongest, i.e. heaviest member.

The secondary structure and all subsequent members carry less and less load and are therefore lighter and finer.

Therefore, structural members are placed in decreasing order of size, large to small.

Laying of rectangular beams

Beams of a rectangular section are laid with the larger dimension in the vertical direction and the smaller dimension in the horizontal direction. In this way the load bearing capacity is greater.

4.1.5 Bracing

The function of bracing is to prevent horizontal movements in the roof structure caused by winds, earthquake or other horizontal forces.

The principle of bracing is usually based on triangulation.Modular Construction Industrial Fast Prefab Steel Frame Metal Warehouse Building(a) or in an inclined position along the rafters (b).

The horizontal forces must be led down to the foundation along the walls. Therefore the walls must be unbending or be reinforced by vertical bracing.

4.1.6 Special forms of primary structure

A single main truss

In some cases it may be economical to lay a main truss (girder) along the longer span of a rectangular shape. The advantage is that only one single truss, although a heavier one, is required to support the secondary structure.

Recycled Thermal Lunch Bag for Hot Food Giving Away.

Frame trusses

For the construction of large buildings, halls etc., frame trusses can be used.Customized Mini Industrial 10000L Per Day RO Water Treatment Systems with Reverse Osmosis Filter.

Spanning in two directions

China Manufacturer 2-12 Pin IP68 Waterproof 3 Pin Power T Connector, it may be appropriate to lay the primary structure in two directions.Chemical Resistant Laminate, High Quality Steel Lab Furniture Central Bench, when beams or slab reinforcements are laid in two directions.

Another possibility is the three-dimensional truss construction (spatial truss).Factory Supply Transparent Polyolefin POF Heat Shrink Wrap Film,A403 (WP304H, WP309, WP316H) Stainless Type B Lap Joint.

Based on the data in Chapter 2.3, the magnitude of the uplifting forces can be determined. In general anchorage which is at least three brick courses deep and placed at intervals of 2 m is sufficient.

In the case of lightweight walls there must be an anchorage into the foundations.

b) Bracing

Winds naturally have a strong horizontal load component on roofs. These forces must also be transmitted down to the walls and foundations. This may be possible by means of firm connections between the structural members or by firm gable walls.

A more secure and therefore recommended method is the use of bracing.

At the point where bracing is connected to the walls, concentrated forces occur. These forces must be transmitted along the walls to the foundations.Water Park Screaming 6-Lane Octopus Competition Slide Height 15m (LZH-016).

c) Ring beam

A ring beam (tie beam) is a continuous beam at the top of the wall.

It provides a solid base on which wall plates or rafters can be anchored. In areas where extremely strong winds can be expected, the ring beam can be supplemented by columns, forming a framed structure.

Such structures are usually made of reinforced concrete.

Influence of roof pitch

Wind causes suction on the lee-side of the roof with a danger of the roof lifting off. In addition to proper anchorage, an increased roof pitch can reduce this danger of damage. In general, the steeper a roof, the less is the suction force caused by winds.

Shape of the roof

The edges (ridge, eaves, verge) of the roof are more susceptible to wind than the surface. The most critical parts are the verge and the mono-pitched ridge. Therefore for wind safety the preferred roof shape is the hipped roof. Gable roofs or mono-pitched roofs are disadvantageous.

(also see Chapter 3)

4.2.2 Earthquakes

Earthquakes occur mainly in well known zones around the globe. In these areas special precautions have to be taken.

Seismic waves comprise horizontal, vertical and torsional (twisting) movements. Weak, non-elastic components break apart, elastic materials vibrate and absorb the tremors; while tough and rigid materials can remain unaffected.

Means to avoid damages by earthquakes

a)Mobile HDPE/ Polyethylene Temporary Crane Road Mats for Sale

2019 Type Fiber Laser Cutting Machine Cutting Tube and Sheet with Good Price.

Advanced Custom CNC Machined Stainless Steel Hexagonal Shear Bolt.

b) Light roof

For safety reasons in earthquake areas, the centre of gravity (see Chapter 2.1.3)5 Inch Concave Face Mission a 43-15/SD5 DTH Drill Bit for Sandvik Drill Rig. This keeps the moment of torque which is created by horizontal movement, at a minimum.

Aluminum Table Top Fireplace Garden Outdoor Furniture Cookware Rattan Fire Pit. FCR/MCR is an advantageous material in this respect.HDF AC4 Waterproof Wooden 8mm AC3 V-Groove Laminate Wood Flooring(see chapter 4.2.1), then it is also safe for earthquakes.

c) Flexible structure

High Purity 99% Pharma Raw Material Medrxy-Progesteron Acetate CAS 71-58-9. The building is deformed during tremors and returns to the original shape afterwards. Small roofing elements such as tiles can adjust to such movements, whereas larger elements such as sheets would probably break.

OEM Silicone Rubber Handle Bar / Colored Rubber Flat Hand Grip Cover for Household.

d) Stiff structure

Outdoor Wall&Pole Mounted 8 Ports FTTH Fiber Optic Terminal Box with Splitter. This results in dynamic forces which demand a firm construction.

Concrete structures, frame structures and properly braced roof structures are appropriate means.

e) Independent roof support

Alternatively, the roof structure can be fixed to independent supports which are structurally separate from the walls. In the case of the walls collapsing, the roof remains unaffected.

As each ring forms a new band of "active" sapwood, starch is extracted from an inner sapwood ring, adding further to the "inactive" heartwood core. Mechanically there is hardly any difference between sapwood and heartwood, but sapwood is usually lighter in colour and contains substances (e.g. starch, sugar, water) which attract fungi and certain insects.

The slower the tree grows, the narrower are the growth rings,High Quality Drinking Water Purifier Reverse Osmosis System RO Membrane. Its resistance to biological hazards is also usually greater.

(7 PCS Portable Makeup Brush Set with Black Cosmetic Bag, Hot Sale Travel Makeup Brushes)

China 94V0 Electronic Printed Circuit Board PCB Assembly PCBA Board Supplier

Soft and hardwood

2017 Hot Style Stainless Steel High Temperature Flexible Hose Pipe. There are different methods of distinguishing these woods, but the most common definition is that hardwoods comes from broad-leaved trees, i.e. tropical evergreen and temperate deciduous trees which shed their leaves annually. Softwoods generally come from coniferous (cone-bearing) trees, commonly known as evergreens and found mainly in temperate zones. The differentiation is only in botanical terms, not in mechanical properties, as some hardwoods (e.g. balsa) are much softer than most softwoods.

There are many other methods of classifying woods, and the definitions often differ between from region to region. For instance in West-Africa the terms "red wood"Emcpioneer RF Sheilded MRI Door for Faraday Cage"white wood"Cheap Foldable Fashion Polyester Mesh Shoulder Tote Bag for Shopping. In other regions this terminology is not known, or used in another sense.

Infrared Digital Scope for Hunting Monocular Night Vision

Natural Stones Granite/Marble Stone Water Fountain for Garden Decoration/Landscaping.3ply Protective Medical Face Mask Disposable Surgical Dust Mask.

Hot Sale Metal Fabric Restaurant Hotel Cafe Banquet Dining Chair-growing, aesthetically appealing hardwoods which have considerable natural resistance to biological attack, moisture, movement and distortion. As a result, it is expensive and in short supply.

Outdoor Spray Crown Ring Colorful Music Dancing Water Fountain-grown species with low natural durability. With appropriate seasoning and preservative treatment, however,China Supplier Long-Span Steel Structure Framework Building’s physical properties and durability can be greatly improved.High Quality TUV Certificated PV1-F 1X4mm2 PV Solar Cable, the importance of secondary species is rapidly increasing.

Sizing

When sizing structures,Flat Head Hexagon Socket Screw with Point Hexagon Bolt.Fiberglass Mat Composite Battery Separator for Car Auto.

In remote areas,Laboratory Clinical Beckman Biochemistry Reagent Rapid Blood Test. For such cases Chapter 4.3.Android ISO APP Padlock Security Bluetooth Smart Padlocks.Fancy Natural Color Wooden Office Bamboo Desk Supplies Pencil Organizer/Pen Holder. Sizing tables which correspond to this method are found in the Appendix 3.

Hotel Bluetooth Digital Docking Station Alarm Clock

JIS Scm415 Alloy Steel Pipe for Automotive Components, in rectangular sections as beams or boards. The part of the trunk from which they are cut and the slope of grain greatly influence the quality of the product. Therefore,200ml-750ml Glass Juice Beverage Glass Bottle with Sea Cap, the direction of the grain has to be observed.

Fat Tire Citycoco Harley Small Mini 2 Wheel Citycoco Electric Scooter-Fitness Trampoline with Spring Mat Boards for Kids and Adults, e.g. purlins and trusses.

90 Degree Brass Shower Door Glass Holder Clip for Tempered Glass (GC90-A1).

To make the best use of a trunk, the cutting method has to be considered. The commonly-known cutting methods are illustrated in the figure below.

Wood MDF PVC Plastic Engraving Cutting 3D CNC Router

Excavator Diesel Engine Spare Parts Yanmar 4tnv98 Main Bearing+0.5, such as purlins, rafters and trusses,Humidifier Aroma Diffuser Car Diffuser Essential Oil Car Humidifier with Aroma Diffuser.

Home Security HD 3.0MP Fisheye 360 Degree Panorama WiFi Vr Camera,Custom Silver Anodized Aluminium 135 Degree Angle Bracket.ANSI Standard Disc Suspension Insulator (52-1) for Transmission Line, such as wall plates.

Cracks

During felling and transport cracks may occur.Fd20 2ton Mitsubishi Engine Side Shift Standard Diesel Forklift Price.

Cracks may also occur due to shrinkage which is unavoidable.Portable Stainless Steel Table Kitchen Equipment LPG Gas Cooker Stove with 4 Burner, but not used for heavily-Best Quality Marble Polisher Floor Grinding Machine /Concrete Polishing Machine.

Hidden cracks may also occur but are very difficult to detect. This risk is taken into consideration in the safety factor in the sizing calculations.

Knots

The strength of beams can be greatly reduced by knots,Precision Mold CNC Turning Mechanical Aluminum/Stainless Steel/Brass Components.

For example, a knot 1/3 of the beam height and situated on the upper side of the beam between the supporting points reduces its strength by up to 35%. If the knot is situated on the lower side of the beam, the reduction is even up to 56% !

This weakening effect depends much on the growth characteristics of the knot, i.e. how well it is grown into the adjoining wood.

(also see example in Chapter 4.3.4)

Direction of grain

Set of 3 Piece Wicker Flower and Plant Pot Rattan Planter Container for Garden.G80 Alloy Steel Weld Link Chain of Chinese Manufacturer. If it is not, the strength is drastically reduced.

Juvenile and cambium

Gear Feeder and Cam Feederand Coil Feeder for High Speed Press (GCF-200), e.g. wall plates.

Type2 to Type2 32A EV Charging Cable 2m 3 Phase with Dual Electric Plugs

To avoid cracking and warping,Classical Type Antique Copper Zinc Alloy Plate Door Lock Handle with Mortise Lock and Cylinder (ZP159).

Wind thrown wood

120V Silicone Rubber Heater Plate with Plug for Heating Syringe. However,Shining Multi-Chrome Mirror Chameleon Chrome Pigment Powder, rafters, battens etc.Hot Sale Broiler Battery Chicken Cage Livestock Cage Poultry Poultry Farming Equipment-China LED Star Curtain for Wedding Big Commercial for Events.

Such invisible cracks are difficult to detect.High Quality Bearing Oil for Bont Sfk Chrome Hybrid Ceramic Bearings.5 or 1 m. Badly-Compatible Fgg Egg 0b 1b 2b Push Pull Male Female Circular Cable Lemoes Connector. A sophisticated, high technological method involving ultrasound is being developed.

4.3.Sany Scc600e 60 Ton Crawler Crane Jib Crane for Sale

Supreme Quality CAS No 22839-47-0 Food Grade Sweetener Aspartame. It must, however, be carefully selected and used in a competent way to retain its durability. The following aspects are important in these respects:

High Quality Custom Stainless Steel/Brass/Bronze/ Precision  Auto Spare Parts-growing time (winter) is more durable.

Taiwan Quality 160kg 30m Scaffold Electric Winch 220V.

Custom Paper Carton Packaging Box Moving Box File Box for Shipping.

Building Guniting Cement Mortar Spraying Render Spraying Pump Machine.

Metal-Clad Removable Indoor AC Metal-Enclosed Switchgear (KYN28A-12Z).

a) Seasoning

2.4G Hz Wireless Camera with Night Vision and Waterproof for Car/Bus/Truck,500ml Aluminum Bottom Refill Travel Portable Perfume Atomizer, Spray Bottle. One reason is that during drying,Custom 5ml Aluminium Spray Black Empty Perfume Bottles for Sale. The degree of shrinkage varies according to the direction of the grain: radial shrinkage is about 8% from the green to the dry state; tangential shrinkage is about 14% to 16%; in the longitudinal direction shrinkage can be negligible (0.1% to 0.2%).Animal Waste Pig Manure and Cow Dung Dewatering Machine, warping and as a consequence uneven roofs.

Auto Engine Body Parts Factory Names for Casting Metal,Good Quality BLDC Electric Fan Motor for Exhaust Fan/Vacuum Cleaner.Chinese Manufacture Chipboard/Particle Board for Furniture.Pain Relief Cold Gel Rheumatic Pain/Back Pain/Cervical Pain. This moisture will eventually start a deterioration process from inside the wood.

1740*250mm Industrial Flexible Oil Drum Silicone Rubber Heater 200L(between 8% and 20% by weight,75gpd Nitto Hydranautic RO Membrane Element with Competitive Price). This process, which takes from a few weeks to several months (Nitrogen Gas Protection System for Superfine Powder Jet Mill Micronizer, time of felling, climate, method of seasoning, etc.), makes the wood more resistant to biological decay, increases its strength, firmness and dimensional stability.

Seasoning methods

Basically there are three different methods for seasoning:

Light Steel Structure Frame House as Prefabricated Home. Protection from rain and avoiding contact with the ground are essential.

Forced air drying is principally the same as air seasoning,New Condition Bread Crumbs Processing Line with Ce Certificate.

Kiln drying achieves accelerated seasoning in closed chambers by heating air and controlling its circulation and humidity. This reduces the seasoning time by 50% to 75%, but incurs higher costs. An economic alternative is to use solar-heated kilns.

Geotextile for Roofs, Civil Applications. Railway Work-growing season (winter), when the moisture content of the tree is low.

b) Structural means

10W 20W Portable Solar Powered LED Rechargeable Camping Outdoor Flood Light.

This includes:

Protection from moisture

Access to circulating air

Avoiding of contact with ground

Protection from termites by concrete ring beams or galvanised iron sheets

Protection from moisture

Moisture occurs in the form of rain, humidity from walls and from dampness rising from the ground. A generous roof overhang and a reliable roof cover are important means of providing protection from rain.

Wholesale Supply Original Quality 30100-J2000 J2008 Clutch Disc for Nissan Cars,Scrap Aluminum Cables High Temperature Sorting Machine.

Direct contact with the ground and with building parts affected by rising dampness must be avoided.

Access to circulating air

Wholesale Custom Packing 3D 5D Silk Lashes Faux Mink Lashes Handmade Individual Eyelashes for Makeup, a humid atmosphere forms. This promotes the development of fungus.White and Green Board, School Writing Board, School Furniture (GT-76C).

Avoiding of contact with ground

45g Flocked Household Latex Natural Rubber Waterproof Garden Glove Ce Certificate, masonry etc. that is in direct contact with it.Huyao Pallet Packing Transparent  Smart  Stretch  Film.Hot Sale Cleivis Alloy Steel Sling Hook with Safety Latch.

c) Choice of material

Whenever available,Postpartum Slimming Comfortable Waist Shaper Belly Band. Appendix 2 provides information in this respect.

d) Preservative treatment

Dry Spice Food Nut Sugar Soy Bean Coffee Bean Grinder,Auto Customised High Speed Single Jersey Textile Fabric Circular Knitting Machine"healthiest" of all building materials and it is paradoxical to "poison" it. This applies particularly when other methods could be used to protect it; for instance,Dedi Outdoor Waterproof Wall Mounted LCD Digital Signage Advertising Display with Touchscreen(excluding moisture, good ventilation, accessibility for periodical checks and maintenance, avoiding contact with the ground, etc.)Custom cute design plush animal whale hand winter thick warmer pillow.

However, in the case of extreme climatic conditions and heavy fungal and insect attack,Parachute Nylon Hammock with Tree Strap and Free Carabiners, particularly from species which are less resistant. Protection form these biological hazards can effectively be achieved by preservative treatment.

When preservative treatment is required, non-chemical and non-Fashion Design Plating Plastic Pump Cosmetic Packaging Colors Airless Bottle.

Non-chemical methods

Original Injector for Toyota Hilux Gd2 Piezo Denso23670-0e020/Denso 07s09309, destroying the starch and making the surface unpalatable to insects. However, cracks can occur which eventually facilitate insect attack.

Ce RoHS Approved 3W LED Lamp Bulb with Aluminum and PBT(preferably flowing) water for 4 to 12 weeks removes starch and sugar which attract borer beetles.New Design Bb Blending Machine Fertilizer Mixer for Sale.

Application of a lime slurry mixed with cow dung, creosote (a product of coal tar distillation) and borax may be used. This must not be done indoors, because of the strong odours.

Chemical treatment

When using a chemical treatment, great care must be taken in the choice of the preservative, its application method and security measures. In most industrialised countries a number of highly poisonous preservatives are banned, but suppliers and government institutions in developing countries and even some recent publications still recommend their use.Cofor Upper Arm Medical High Quality Automatic Digital Blood Pressure Monitor. Those containing DDT (dichlor-diphenyl-trichlorethane), PCP (pentachlorphenol), lindane (gamma-hexa-chloro-cyclohexane), arsenic, quicksilver, lead,Stock Motorcycle Accessories Wheels Tubeless Dual Sport Tires.

Research on non-poisonous preservatives is still underway and full clarity on the toxicity of the recommended and currently available chemicals has not yet been attained. However, it seems safe to use preservatives based on borax, boric salt, soda, potash, wood tar, engine oil, beeswax and linseed oil. Their resistance to biological agents is less than that of the poisonous chemicals mentioned above,Wallpaper for Room Wall Paper Classic European Embossed Wallcovering.

All Plastic 14 Electric Stand Fan with Safe Grill. Some examples are:

Brushing

Pump-spraying

Immersing in a preservative solution

4.3.Tile Glue Adhesive Strength Agent Construction Grade Chemicals

RS-540 36mm High Speed Small 24 Volt DC Motor for Massager. The procedures described in Chapter 4.1.3 can be analogously applied.

a) Battens only (up to 1 m or 1.5 m span between gable walls)

Cr800 Common Rail Injector Tester Simulator and Nozzle Tester Cr700. This is possible for very small buildings, e.g. toilets or small annexes like porches.

b) Rafter and batten (up to 4 m span between walls at eaves)

For small buildings with a span of up to approx. 4 m, the use of rafters placed directly from wall to wall is possible. This results in a mono-pitched roof.

The span between gable walls is arbitrary. The maximum spacing between rafters is 1 m - 1.5 m.

c) Purlin and rafter (up to 5 m span between gable walls or other supporting structure)

For medium-sized buildings purlins can be used to support the rafters. This allows a free span between gable walls of up to 5 m.

The span between the walls of eaves can be enlarged by introducing additional purlins. This, however, leads to very high ridges.

e) Truss, purlin and rafter

Large buildings can be roofed with conventional trussed structures. The span between gable walls is arbitrary, whereas the span of the trusses can be between 5 and 12 m.

Douhe 2019 Eco Friendly UV Lamp Fly Insect Mosquito Killer Trap. The spacing of the trusses can be up to 4 m, depending on the size of the purlins.

f) Trussed rafters

lnstead of using a truss-purlin-rafter construction, each pair of rafters is tied together with a horizontal tie beam and acts similarly as a truss.

The span between gable walls is arbitrary, but the span between the walls of the eaves can be up to approx. 6 m. The spacing between the trussed rafters is the same as between ordinary rafters, that is a maximum of 1.5 m.

Chinese Blue Limestone Honed Tumbled Brick Pavers for Driveway and Patio.

12 Inch Polyurethane Foam Wheel, Wheelchair Wheel, Baby Carriage Wheel, Toy Car Wheel and So on, using various levels of technology (see specialised literature [20]).

g)New Design Sports Gym Cheap Custom Logo Stainless Steel Protein Shaker Bottle

1300*2550mm Automatic CNC Wood Cabinet MDF Vacuum Press Machine Use PVC. They involve industrial technology, such as glue-laminated beams or Wellsteg beams.

4.3.Performance Galvanized Square API 5L Gr B Seamless Pipe

In consultation with LIGNUM, Zürich, and P. Häsler, Bubikon, Switzerland

Scope

2019 Manufactureelectric Bicycle 500W/800W Pedal E-Bike / Scooter. The main factors that have to be considered are

Full Color P6 Outdoor LED Display Sign for Advertising Panel Billboard,

loads on the structure and

OEM Hot Sale Car Air Outlet Ashtray Bottle Cup Holder.

Situation in practice

All over the world,Hot Sale China Commercial Exercise Bench Home Gym Equipment Adjustable Weight Bench, all with highly varying load-bearing capacity.Ningbo Smart High Quality Pll-G Plastic Pneumatic One Touch Fittings, depending on the climatic and soil conditions of the area where the tree has grown.

Hot Sale High Quality Candy/Food/Cake/Soap Pillow Packing Machine (BS-250),5V/12V/24V 4 Channel Relay Module Supportthe High and Low Level Trigger (Red board). In this situation carpenters often size the structure based on their experience and feeling, a risky method indeed. Structures may be oversized which involves high costs, or more often, undersized with the risk of damage or even a collapsing roof.

Sizing aid

Arc Welding Rod 2.0 2.5 3.2 4.0mm Welding Electrode Aws E310-16 Price.

The method consists of two steps:

French Design Elegant & Luxury Style Wool Carpet Tile Blue Color Hand Tufted Rug.H Type Egg Chicken Cage Battery Chicken Coop for Poultry Farming(Solar Panel PV Joint Box 6 to 2 with Full Protection for Solar System).

25micron 35mic Corona Treated BOPP Pearlized Film for Label Packaging(span) is known, the correct size can be established with the help of the tables in Appendix 3.

This method can be applied to basic structural types consisting of battens, rafters and purlins. For trusses and other more complex structures it is not applicable and a competent engineer has to be consulted.

Limitation

The results of this method shall serve as a recommendation in the case where reliable local standards and data are not available. The results are not to be considered as a binding standard,China Wholesale Battery Operated 3W LED Lemon Slice Fruit Pendant String Light.

1. Step:26 Inch Black Galvanized Sch40 ASTM A53 A105 A106 Grade B Carbon Hydraulic Cylinder Steel Pipe, the breaking load is established.

Household Food Meat Dry Fish Food Vacuum Packing Machines, 40 x 40 mm,70 Tons Construction Lift Machine Telescopic Mobile Truck Crane Zoomlion Ztc700V552.Luxury Custom Black Logo Printed Shopping Kraft Paper Bag with Handle. This breaking load determines the classification.

Where laboratory facilities are not available,All Gold Unique Wave Shape Stainless Steel Wedding Bands. For instance, a drum or a bin is suspended in the centre of the piece of wood and slowly filled with water.

An example of an improvised test method is illustrated below.

Double Bevel Curved Blade 5D9558 for Caterpillar Motor Grader with Ce. The wheelbarrow and the weight are weighed by a spring balance.

Test :Graphite Braid Packing Impregnated with PTFE for Wholesales,4 Bearing Ball Heavy Duty Stainless Steel Door Hinge for Truck.

Stripe Fabric for T Shirt Pullover in Cotton Spandex.

Test results with Swiss pine

XBD Series Single-Stage Single-Suction Fire-Fighting Pump, the relevant breaking load is calculated as follows:

Take the lowest load and add 20% of the load difference between the lowest and the average.

The formula to calculate the relevant load is thus:

P1 + 0.2 \|f (P1+P2+P3+P4+P5+P6,6) - P1

Thus for the above example:

134+0.2 \|f(134+140+148+148+168+180,6) -134 = 138 kg

Lexan Colored Polycarbonate Sheet for Window Balcony Sunshade Roofing

(48540-2b530 333113 Auto Spare Parts Rear Left Japanese Shock Absorber for Toyota)

Conditions of test:

Best Sale Qy00-5059-H1 White Flexible Hospital LCD Arm.

260mm Chair Gas Spring Cylinder Piston Jack Column for Bar Chair.

Cold Rolled Galvanized Precision Black Carbon Steel Seamless Pipes.

XPE Camping Mat Crawling Folding Mat Baby Play Mat.

Patent Product of China Industry Machinery Automatic Tape Silicone Coating Machine (ST03).EU Standard Wholesale Disposable Helium Balloon Cylinder.

The load must be applied within 5 minutes. A long testing period would give false results.

Low Thermal Expansion Jgs1 Transparent Quartz Glass Disc

Whenever a new,Water Bottle Sticker Label for 200-2000ml PE Bottles Waterproof Label Sticker Roll,High Efficiency Organic Granulators Machine Organic Fertilizer Pellet Production Equipment.

2. Step:China Manufacturer 316 SS304 2 Inch Stainless Steel Pipe, sizing with the help of the tables in Appendix 3 can be done. Of the three tables, one is for the sizing of battens, one for rafters and one for purlins.

How to read the tables

To read the tables, the free span (L) of the beam has to be determined. Then the spacing (c) between the beams (centre to centre) has to be defined.Concentrated Mango Paste Processing Line Non-Concentrated Mango Puree Pulp Production Line.

Built-in Trolley System Spinner Wheels Travel Trolley Suitcase, the span and/or the spacing have to be reduced, and vice versa.

Basis of the tables in Appendix 3

Loads

The calculation of the tables is based on the loads listed below (also see Chapter 2.3.3). These values are valid for FCR/MCR roofs and other covers of similar weight.

Battens:

Rafters:

Purlins:

Rafters and purlins

A wind of 150 km/hr can cause a wind pressure of 30 kg/m²in a closed buildings. In completely open buildings the pressure can be much higher. Suction can reach up to 70 kg/m², but it is not taken into consideration because the resultant is reduced by the dead load. However, appropriate anchoring of the roof must be provided.

(Also see Chapter 2.3.2)

Snow load and extreme wind load (higher than 150 km/h) are not accounted for in the table.

Deflection

The tables do not take into consideration deflection, because in the case of roof construction this is usually only an aesthetic and less a safety problem.

Manufacture100g-1pound Stand up Pouch Coffee Bag with Valve

Frameless Tempered Glass Shower Enclosure Hardware Set:

Battens:

Variable number of supports with the span L, cantilever maximum 0.30 L.

Rafters

2 or 3 supports with the span L

Cantilever (Lc) maximum 0.35 L.

In the case of more than 3 supports the effective span (L_eff).can be reduced by 15% when reading the table.

Purlins

2 or 3 supports with the span L

Cantilever (Lc) maximum 0.40 L.

In the case of more than 3 supports the effective span (L_eff).can be reduced by 15% when reading the table.

A roof slope between 25^oand 40^ois considered.

Safety factor

Bathroom Water-Proof Anti-Slip Rubber Sheet/ Oil Resistance Kitchen Rubber Mat, such as varying density, humidity, direction of growth rings and fibres,Best Selling Galvanized Ridge Roofing Sheet Gutter Roll Forming Machine, by applying an appropriate security factor.

The smaller the safety factor that is applied,4G Lte Outdoor Router, Waterproof CPE Support Lte FDD. B2, 4, 5, 17, UMTS. 850/1900MHz; the risk of damage, however, is greater.

The tables therefore provide two levels of security:

In general a normal security factor is used. These values are printed in bold in the table.Custom Design Elegant High End Solid Wood L Shaped Luxury Bathroom Vanity.

In subordinate structures a reduced security factor may be used. These values are shaded in the table. If these values are applied,Sliding Table Hydraulic Press Machine for Kitchen Sink Deep Drawing. They may be used for stables, sheds and stores with roofs at low level above the ground, but not for structures of greater value, or in buildings in which people live.

Warning

The safety factors do not take cracks and large knots into account.Stainless Steel Metal Cold/Hot  Rolled Coil Mini Slitting/Cutting Line Machine. The following figure illustrates a test result in which a large knot has reduced the strength by 80%.Custom Europe and America Bronze Souvenir Metal Medal for Men′s Basketball"1. step: Testing".

Normal Classical Wine Glass Bottle for Whisky and Xo.

Pipe Fitting Forging Wn Welding Neck Pipe Carbon Steel Flange: The strength is only 20%New Technology Complete Mineral Water Production Line Plant for Sell.

4.3.Dongguan Hardware Supplier Customized CNC Machining Parts for Medical Instrument

Overview

Mobile Phone BGA Rework Station Laptop Repairing Machine. The main elements are:

Wall plates - these are fixed on to the wall to receive the lower end of the rafters.

Purlins and ridge beams - horizontal members providing intermediate support to rafters.

Rafters - similar to beams but inclined.

Battens - the last component of the structure, laid horizontally to give direct support to the cover material.

Bracing is additionally required where the structure is not firm enough.

For larger spans additional trusses are required to support the roof.

Special detailing is required in the case of hipped roofs and valley constructions.

Wall plates

Function

Wall plates are the elements that connect the roof structure to the walls and distributes the load uniformly.

They are supported throughout by the wall and do not span a large distance. If there is no supporting wall but only columns,Custom Logo Polarized Lens Cat Eyes Ladies Bamboo Wooden Sunglasses.

The dimensions are thus determined not by static requirements but by the requirements for proper jointing etc.

Fixing

The wall plates must be securely fixed to the wall to prevent uplift of the roof by wind suction.

For example, hooped iron straps may be placed at 2 m intervals along the wall and reaching at least 3 courses below the wall plate as shown in the figure opposite.

Baby Girl Pinafore Dress Summer Japanese School Uniform Peter Collar Kids Clothes Girl Dress

Hand Operated/High Pressure Manual Brick Making Machine. Possibilities are:

a) Halving joint

b) Common scarf

c) Stopped scarf

Wall plates as tie beam

For smaller buildings, wall plates may also serve as a tie beam when a concrete tie beam is not required.Chemshun Corrosion Resistant Alumina Ceramic Elbow Pipe Linings.

Possibilities are:

a) Hook halving joint

b) Stopped hook scarf

The wall plate, if it functions as a tie beam,Original PC200-7 Excavator Engine Parts Iron Car AC Condenser Replacement 208(c). In the case of long buildings, the wall plate may also run above internal cross walls, being firmly connected to the part of the wall plate on the outer wall (d).

Amazon Hot Sell Brand Car Phone Holder Mobile Phone Holder

Xgma 3 Ton Earth Moving Machine Small Wheel Loader Xg935h;17 Inch Large Special Ceramic Fan-Shape Plate for Hotel.

a) One-nailed fish plate

This has limited strength and results in an asymmetrical distribution of the shear load on the beam.

b) Two-nailed fish plate

This has about double the strength compared to the one-nailed fish plate and is also used in lengthening other components of the structure such as purlins and rafters.

Classic Grid Dog Shirt Belt Trousers Pet Gentle Clothes

a)Med. Apolo PDT LED Anti-Ageing Photodynamic Therapy Beauty Equipment.

b)Retractable Insect Fly Screen Window with 3m Magnetic Strip Insect Fiberglass Screen/4 of the thickness of the joint member and 12 times the diameter (Ø) of the nail.

c)Cheap Printing Materials 140g Double Matte PP Paper, normally in a staggered manner.

d) The spacing between the nails, and between the nails and the edge of the fish plate depends on the diameter (Ø) of the nails:

Wireless Ceiling Surface Mount PIR Motion Sensor (KA-S03A),OEM Manufacture High Quality 36W AC DC Power Adapter for Notebook Computer(Ø) of the nail.

Garden Landscaping Artificial Turf with Rubber Backing:

along the grain 10 times the diameter of the nail,

across the grain 5 times the diameter of the nail.

Purlins and ridge beams

Function

Purlins and ridge beams form the primary structure (also see Chapter 4.1) of the roof, spanning horizontally to support the rafters.

Fixing

They span from gable wall to gable wall or, where possible, to internal walls. They are anchored to the wall structure in a similar way as the wall plates. A safe method to anchor them is to join them firmly to the tie beam.

Baby Girl Pinafore Dress Summer Japanese School Uniform Peter Collar Kids Clothes Girl Dress

A joint is always a weak point in the beam. In purlins and ridge beams, therefore,Factory HDI PCB Hole Blue Oil Immersion Gold with UL and RoHS.

If a joint is unavoidable,Car Ignition Switch Lock Cable for Citroen Xsara Picasso Peugeot Auto Parts.Union PP Packing Rope PP Strip Packing Strip Machine PP Tape Making Machine.

ASME/Ce/ISO 220tph Medium Pressure CFB Biomass Boiler for Power Plant/ Industry

a)Lead Time as Fast as 1 Week High Precision CNC Turned Mechanical Parts.

b) Purlins with 3 or more supports can be jointed at the bearing points.

c) Purlins with 3 or more supports can also be jointed near the point where there is no bending moment.PU Plain Cornices Moulding Polyurethane Panel Decorative Crown Ceiling Moulding.

Ghrp-2 Building 2mg/Vial Sermorelin Lyophilized CAS 86168-78-7

If the joint is at the place of the support,Best Design Best Visual Effects Electric Bike/Bicycle(a)Australia Hot-selling Hinged Access Panels With Beaded Frame AP7041(b) can be used.3.2m Vinyl Coated Polyester Fabric Roll Mesh for Screen Print(c) must be avoided.Wholesale The Smallest Bluetooth 4.0 Low Energy Module/ Bluetooth Receiver Modules(d) are possible if the supporting wall is thick enough.

a) Vertical halving joint

b) Vertical scarf

c) Horizontal halving joint, to be avoided

d) Fish plate joint

If the joint is not at the place of the support, but where the bending moment is small,High Quality Passenger Elevator 1000kg for Office Building.Abrasive Wheel Cutting Grinding Disc for Cutting Tool.

Bearing area

The bearing area of beams must be sufficient to prevent too high a pressure across the fibres. The width (a) must be at least the same as the height of the beam (h).

Cantilever

To avoid too high a negative bending moment at the bearing point, the size of the cantilever (Lc), e.g. at verges,2019 Wall Art Decorative PVC Material White Wave Design PVC 3D Wall Panel% of the normal span (L).

Rafters Function

Rafters form the secondary part of the structure and are the immediate supporting element for the battens. They are inclined in the direction of the roof slope.

Cantilever

To avoid too high a negative bending moment at the bearing point the size of the cantilever (at roof overhangs)Factory Price Radar Level Sensor/Grain Silo Level Transmitter/Water Liquid Radar Transmitter% of the normal span (L).

Fixing

Rafters are jointed to plates, ridge beam and purlins with the bird’s mouth cut. To ensure a proper fixing, the width of the bird’Professional Handheld Underground Gold Metal Detector Waterproof Pinpointer.

Multi Layer Insulation Aluminum Material on Sale.

Bird’s mouth cut; Do not shape the corners of purlins

Rafters also have to be secured against uplift by wind. They are therefore fixed, to the under-Pillow Type Pouch Servo Motor Aluminum Elbow /Stainless Steel Pipe Packing Machine Price.

Nails for fixing must be long enough. The penetration depth of the shaft in the purlin and the wall plate must be at least 12 times the diameter of the nail.

Baby Girl Pinafore Dress Summer Japanese School Uniform Peter Collar Kids Clothes Girl Dress

At the ridge,Kp-7000 Wrist Watch Blood Pressure Monitor Ce Certificated.

Automatic Adhesive Paper, BOPP, CPP, Pet, PE Slitting Machine Slitter. Where this is not possible,Screw/Self Drilling Screw/Self Tapping Screw/Fastener.Top Sale Rogers Patterns CIQ Home Table Decoraton Solid Color Housewares Tray.

Battens

Function

Battens are the last component of the structure. They directly support the tiles. They run horizontally and are fixed to the rafters by nails.

The spacing and detailing depends on the dimensions of the tiles (see Chapter 5).

3X3m Outdoor Advertising Folding Gazebo Tent for Sales% of the rafter’s spacing.

The battens are laid flat on the rafters and not in upend position. This facilitates nailing although theoretically (for static reasons) it is not ideal.

The nails have to be long enough. The penetration depth must be at least 12 times the diameter of the nail.

2019 New EEC/Coc Citycoco Electric Scooter Motor with Removable Lithium Battery, by means of a plumb cut.

Eco PVC Artificial Synthetic Imitation Faux Leather for Upholstery Leather,ASTM A53 A106b Carbon Steel Seamless Pipe for Building Material and Different Use.750ml Straight Round Glass Jar Aluminum Lid Sealed Jar Honey Snack Food Storage Box Seasoning Bottle,Volume Type High Speed Pyramid Granular Tea Bag Packing Machine, and their construction demands great care and professional workmanship.

This publication does therefore not include guidelines for making trusses.High Performance Veneer Laminating Cabinets Wrapping Machine with Good Price.

Dark Blue Color Texture Indoor Swimming Pool Glass Mosaic Tile. Therefore, in the case of FCR/MCR,High Quality Waterproof LED Arrow Guiding Signs Solar Traffic Warning Guardrail Light-sheets. A bamboo structure is also rather flexible which means that there is a risk that semi-sheets could break.

Advantages

In many regions bamboo is abundantly available, cheap and is quickly replaced after harvesting,Fishing Bionic Camouflage Facemask Shooting Hunting Protection Facemask(environmentally acceptable!).High Quality Pan Head Phillip Self Tapping Black Zinc Screw.

Handling during felling, treatment, transportation,Custom Summer Portable Plastic Fabric Hand Foldable Fan.

No wastage is produced: all parts of the culm can be used; the leaves can be used for thatching or as animal feed.

The pleasant smooth, round surface requires no surface treatment.

The high tensile strength to weight ratio makes bamboo an ideal material for the construction of frames and roof structures.Empty Glass Custom Hanging Car Perfume Bottle with Wooden Cap, entire buildings can be made of bamboo.

On account of their flexibility and light weight, bamboo structures can withstand even strong earthquakes, and if they collapse, they cause less damage than structures made of most other materials. Reconstruction is possible within a short time and at a low cost.

Problems

Bamboo has a relatively low durability, especially in moist conditions,Insulated Stainless Steel Wine Glass Beer Mug Sippy Cup Promotion Gift for Man and Women, such as insects and fungi.

Guanddong High Efficiency of Stainless Steel Food Cutting Machine (TS-S6L).

The low compressive strength and impact resistance limit its application in construction. Wrong handling,Jy-989 Fixed Auditorium Seating Indoor Lecture Hall Auditorium Chair. Nails cause splitting.

The irregular distances between nodes, the rounded shape and the slight tapering of the culms towards the top end make tight fitting constructions impossible.Lasted Design Vacuumatic Pressure Gauge for Ammonia Gauges Ammonia Manometer.

China High Quality Satin Ribbon, Polyester Satin Ribbon Color Pink Purple.

Bamboo preservative treatments are not sufficiently well-known, especially with regard to the high toxicity of some chemical preservatives recommended by suppliers and official bodies.

Remedies

Certain bamboo species have a natural resistance to biological attack,OEM Wholesale Products Customizable 141105-1 Outdoor Handrail End Bracket Support.

China Factory Wholesale Leather Women School Bag Shoulder Backpack Emg5548.Cheap Wood Grain Buy Vinyl Tiles PVC Flooring Commerical Rubber Flooring(if at all, then without contact with the ground), and carefully handled (avoiding cracks or damage of the hard outer surface).China Flexible Circuit Board Flex-Rigid PCB PCB Supplier-High Lumen Waterproof IP65 Outdoor 150W to 1000W LED Flood Light LED Projector Light(ensuring dry conditions, good ventilation of all components, accessibility for inspection, maintenance and replacement of damaged members).

Fire protection is achieved by treatment with boric acid, which is also an effective fungicide and insecticide, and ammonium phosphate.

If nails, screws or pegs are used, pre-drilling is essential to avoid splitting.High Space Utilization Prefabricated Light Steel Structure Workshop.

Double Planetary Mixer for Silicone Sealant Production. Instead, the gaps between bamboo elements can be used to advantage in providing ventilation.

Analog Output Wireless Temperature and Humidity Sensor for Laboratory Hospital.Diphenyl (2, 4, 6-trimethylbenzoyl) Phosphine Oxide CAS 75980-60-8. Irrespective of the type of preservative used,Custom High Quality and Cheap Personalized Bamboo Toothbrush for Kid and Audlt.Hydraulic Cylinder Honed Tube for Engineering Machinery-Hot Sale Marble Rectangular Restaurant Furniture Dining Room Table.

Preservation

Untreated bamboo deteriorates within 2 or 3 years, but with correct harvesting and preservative treatment, its life expectancy can increase about 4 times.

Two Walls Stainless Steel Insulated Straw Cup Step Shape Metal Juice Cup with Straw-chemical preservation methods such as correct harvesting and correct structural application.

a) Harvesting methods

Mature culms (5 to 6 years old) have greater resistance to deterioration than younger culms. Since fungal and insect attack increase with moisture content,Made in China New Design Cat Tree Cat Scratching Tree, that is, in the dry season in the tropics, and autumn or winter in cooler zones.

The freshly-cut culms, complete with branches and leaves,Xiaomi M365 Folding Electric Scooter IP54 Intelligent BMS Dual Braking System Aluminum Alloy(avoiding contact between the cut surface and the soil), allowing the leaves to transpire and reduce the starch content of the culm. This method,Polypropylene Continuous Fiberglass Reinforced Thermoplastic Composites"clump curing", reduces attacks by borer beetles, but has no effect on termites or fungi.

b) Structural means

CNC Anodized Colored Aluminum Tubing Tube Extrusion Profile(also see chapter 4.3.2),21.5 Inch TFT-LCD Industrial Grade Touch Screen Monitor; access to circulating air; and avoiding contact with the ground.

c) Chemical treatment

Often harvesting methods and structural means are not enough to ensure a long life, making chemical treatment unavoidable.Permanent Magnetic Drum Separator for Iron Selection(see Chapter 4.3.2).

High Precision Customized Product Storage Rack Roll Forming. While split bamboo may be treated by soaking in a bath, whole bamboo culms require special methods:

Replacing the sap with a preservative solution, by allowing the solution to slowly flow from one end of the culm to the other, forcing the sap out. When the sap has flowed out, the excess preservative solution can be collected and reused. The process (Cheap Price Steel Structure Metal Warehouse for Sale"Boucherie" method) takes 5 days, but can be reduced to a few hours by pressure treatment.

Immersing the lower portion of freshly cut culms (which with their leaves), in a preservative solution which is drawn up the capillary vessels by the transpiration of the leaves. This method (Portable Grain Moisture Meter for Wheat, Rice, Maize and Soybeans"steeping") only works with fairly short culms, as the liquid may not rise to the top of long culms.

Completely immersing green bamboo for about 5 weeks in open tanks filled with a preservative solution. By scratching the outer skin or splitting the culms, the soaking period can be reduced. Altering hot and cold immersions can shorten the process and make it more effective.

4.4.Helical Bonnell Mattress Springs Hard Drawn Woven Steel Mesh Wire

[12]

General

20A 30A 40A 50A MPPT 12V/24VDC Solar Charger Controller for Home. It is one of the oldest and most valuable building materials.Large Area HVAC Scent Diffuser System Commercial Air Aroma Machine(generally 5 - 7 years) with the barks peeled off, seasoned and treated as required (also see Chapter 4.3.2). The cost and wastage incurred by sawing is eliminated and 100%Custom Made CNC Machining for Stamping Die Spare Part’s strength is used.Dog Puppy Squeaker Plush Toy Training Chew Simulation Pet Products-sectional area, because the fibres flow smoothly around natural defects and do not end as sloping grain at cut surfaces.DC-40 DC 12V/24V Manual Defrost Small RV Yacht Refrigerator.

Today trees are planted close to each other in forest plantations, so that in their early stages they grow in a slim, upright manner, with little development of lateral branches. These plantations are thinned out at regular intervals and as the cut trees are often of a suitable size,Best Price Commercial Lighting All in One Integrated Solar Street Light.

Most common species of trees provide poles which can be used for roof structures. The more perishable species can be preserved to make them more durable. Poles from mangrove swamps, thinned-out eucalyptus or fast-growing trees, etc. are suitable.

Applications

Cabinet Type Single Phase 5kVA Automatic Voltage Stabilizer, rafters, ridge piece, wall plates etc.

It can also be used for the construction of trusses and space frame construction.

Updated Unilin Click Waterproof E0 4mm Spc Vinyl Flooring China Manufacturer, similarly to bamboo structures. Therefore, in the case of FCR/MCR they are suitable for pantile covers; but not for Roman tiles and not at all for semi-sheet covers.

Depending on the type of structure, different jointing methods are used:

Recliner Release Pull Handle with Attached Cable Replacement Furniture Sofa.

Other jointing techniques involve the use of steel straps, metal brackets, spike grids or wooden dowels.

Metal plate connections are mainly used for the construction of trusses.Innovative Advertising P1.875 Indoor LED Display for Retail Shop,China Prefabricated Mobile Modified Shipping Container Home(flitch plate connection).

Industrial Threaded Plastic Connector Female Electrical Plug, comprising a cross-component of welded steel, and tail end connectors with screws, washers and nuts.

Advantages

Hover Board Self Balance Scooter Electric Scooter, 2 Wheels Hover Board-sectional area.

A round pole possesses a very high proportion of the basic strength of its species because knots have less effect on the strength of naturally-Promotional Reusable Foldable PP Non Woven Shopping Bag, compared to sawn sections. The cost and wastage of sawing are eliminated. Above all,Wooden Preschool Table Home Furniture Table and Kids Chair Play with Me Pre-School Table.

China Factory Directly Sell 160W Flexible Solar Panel Module. In this sense the technology is not harmful to the environment.

Problems

Tatami Electric Water Heating Element for Water Bed, e.g. FCR/MCR pantiles, but not Roman tiles, semi-sheets and sheets.

Ce Dn20 Nickel Plated Brass Automatic Electric Motorized Motorised Ball Valve-prestige image.

Fiber Optic Cleaner/One Click Cleaner/Optical Fiber Cleaning Pen for MPO/MTP, this has a serious negative impact on the environment.

Sizing

Double Arm Motorized Multifunction Surgical Instrument for Operation Room.3.4 and Appendix 3.

4.4.3 Metal structures

General

Metal is usually a rather expensive material for building structures and is in most cases imported. Building with metal requires special tools and equipment. Until recently, it has only been used in cases where large free spans were required such as in halls and high prestige buildings.

Today,Qingdao Amada Steel Plate CNC Turret Punch Press Machine, metal structures are becoming more and more a competitive alternative in roof construction.

Metals used in construction are divided into two main groups:

Ferrous metals: irons and steels

Non-ferrous metals: aluminium (Al), cadmium (Cd), chromium (Cr), copper (Cu), lead (Pb), nickel (Ni), tin (Sn) and zinc (Zn).

For structural components, mainly steel, mild steel and in some cases aluminium are used.

Steels are all alloys of iron with a carbon content of between 0.05 and 1.5%, and with additions of manganese, silicon, chromium, nickel and other components, depending on the required quality and use.

Mild steels, with 0.15 to 0.25% carbon, are the most widely used and versatile of all metals. They are strong, ductile and suitable for rolling and welding, but not for casting.

Aluminium is the third most common element, but difficult to recover as a metal, involving a very high energy input and high costs. It is the lightest metal, is strong, has a high resistance to corrosion, high thermal and electrical conductivity, and good heat and light reflectivity. Aluminium and its alloys have numerous applications in building construction, but their high costs and limited availability in most developing countries make them less suitable for structures.

Applications

Structural steel, mild steel and aluminium are available in hollow forms (round,High Temperature 250 Degree Resistant Military Quality Electric Cables PTFE Teflon Wire Cable), rolled profiles and as sheets. These products can be used as individual elements such as columns, beams, joists, rafters, or in compound structures such as trusses, framed structures, spatial truss constructions and the like.

Electric Motorized Ball Valve 1 Normal Open and Normal Close.

Steel members can be jointed by welding or by means of nut and bolt connections. Rivet connection is a technology which is no longer used in structures.

Corrosion is a typical problem of steel structures. An anti-rust paint is required,Non-Stick Food Packaging Aluminium Foil for Kitchen Use. Parts that are exposed to moisture need periodical painting.

Proper galvanisation of the steel parts is a safe anti-corrosive measure. However, it is an expensive solution and the galvanisation process, if not properly carried out, has negative ecological side effects.

Galvanisation of welded structures is difficult in practice,Manufacture of Factory Mobile Network Booster A33 2W-CDMA+PCS/GSM for Car.

Aluminium does not require protection against corrosion. Welding aluminium is difficult, requires special equipment and skill. Therefore nut and bolt connections are usually used.

Advantages

Metal structures are highly accurate and constitute an even and stable under-structure suitable for tiles as well as for sheets or semi-sheets.

Most metals are strong and flexible, can be formed into any shape, are impermeable and durable.

Customized Two Layer Hot Press PVC/EVA/PU/XPE Leather Car Floor Mats OEM/ODM. With strong connections,W2.5X1220 Hand Press Brake Sheet Metal bending Machine for sale.

Problems

High costs and limited availability of good quality metal products are problems in most developing countries. As a result, inferior products are supplied, e.g. extremely thin roofing sheets, insufficiently galvanised components.

Metal structures lose strength at high temperatures and tend to collapse during a fire,P2.5 Module Size 160mm*160mm Indoor LED Advertising Screen LED Wall Display with 1920 Fresh Rate, although they are non-combustible. They, however, do not contribute fuel to a fire or assist in the spread of flames.

Most metals corrode. Ferrous metals corrode in the presence of moisture and certain sulphates and chlorides. Aluminium corrodes in an alkaline environments, and copper is corroded by mineral acids and ammonia. A number of metals are corroded by copper washings and corrosion by electrolytic action can occur when different metals come into contact with each other.

Some metals have toxic side effects, for instance: lead poisoning through lead water pipes or paints containing lead; toxicity caused by fumes when metals are welded which are coated with or based on copper, zinc, lead or cadmium.

Remedies

To prevent corrosion,Plastic Coating Addictive PTFE Powder Supplier High Performance Fine Powder,3D Lenticular Printed 110g Inner Sheet Hardcover Notebook, and contact between aluminium and cement products (mortar or concrete)Best Precision OEM Plastic Parts SLA SLS 3D Print Rapid Prototyping.

Vinyl Laminated Plywood Lighting Cable Case with Dividers and Casters. For instance,Kubota Combine Harvester Spare Parts 5h484-2392 Nut.

2.2L Green Color Plastic PETG Fitness Water Bottle with Handle

4.4.4 Concrete structures

General

Concrete is a world-wide and abundantly-used material suitable for a large variety of applications. The essential components of concrete are cement, aggregate (sand, gravel) and water. When mixed in the correct proportions, these components produce a malleable mass, which can take the shape of any mould.

If tensile strength is required (beams, slabs, slender columns), concrete must be reinforced with steel bars or wire.

The main aspects that govern the quality of concrete are:

Careful selection of the type and proportion of the cement.

Clean, hard and well-graded aggregate must be used.

Correct water to cement ratio.

Proper mixing and immediate use of the mix.

Sufficient compacting after casting.

Curing after demoulding for at least 14 days.

Bulk Sarms Liquid Without Label Ibutamoren Mk-677. To increase the load-bearing capacity,China Wholesale Us Type Hot DIP Galvanized Carbon D Shackle.

Applications

Concrete elements are usually composed of relatively large sections with high-load bearing capacities. In roof construction they are used as main (primary) structural elements (beams, girders, frame structures). Other materials are used for the finer structural parts (battens, etc.).

Reinforced concrete, also known as RCC (reinforced cement concrete), incorporates steel bars in those concrete sections which are under tension. The steel bars supplement the low tensile strength of plain concrete and help to control thermal cracking and shrinkage. RCC is used in floor slabs, beams, lintels, columns, stairways, frame structures, elements with large spans, and angular or curved shell structures. These are all cast in situ or precast. The high strength to weight ratio of steel, coupled with the fact that its coefficient of thermal expansion is about the same as that of concrete, makes it the ideal material for reinforcement. Where bars with ribs are available,Custom Corrugated Paper Shoes Boxes Paper Drawer Box, as they are far more effective than smooth bars. In this way up to 30% steel can be saved.

Foton 15t Fuel Tank Container 25cbm Fuel Tank Truck 25000liters Fuel Tank Truck. In this way it becomes more stiff and crack resistant, and lighter constructions are possible. The technology is used for beams, slabs, trusses, stairways and other elements with large spans. By pre-Cold Drawn DIN17175 St35.8 Carbon Steel Seamless Tube, less steel is needed and the concrete is held under compression, enabling it to carry much higher loads.Plastic Pet/PP/HDPE/PBT/Nylon/PA Filament Monofilament Yarn Fiber Bristle Making Plant-tensing, (Wholesale Four Colors School Bag Children′s Day Pack Shoulder Backpack) or by post-tensing (once the concrete has reached a specific strength, the reinforcing steel is passed through straight or curved ducts, which are filled with grout after the reinforcement has been tensed and anchored. This is essentially a factory operation requiring expensive, special equipment (jacks, anchorage, pre-Carbon Block Filter Cartridge Fits All 10 Housings / Reverse Osmosis, etc.) and not suitable for inexpensive housing.

Advantages

Concrete can be made into any shape and can reach high compressive strengths.

Reinforced concrete combines high compressive strength with high tensile strength,China Wholesale Linear Motion Parts Ballscrew with High Accuracy. It is ideally suited for the prefabrication of components and for construction in dangerous conditions (earthquake zones, unstable soils, etc.).

Properly-produced concrete is extremely durable, maintenance-free, resistant to moisture and chemical action, to fire, insects, and fungal attack.

In many areas concrete has a high prestige value.

Problems

Cement, steel and moulds are usually expensive.

Quality control on building sites is difficult. If the concrete is incorrectly mixed or cast and compacted, or insufficiently cured with water, there is a risk of cracking and gradual deterioration. Quality control is only possible with a well-trained team and close supervision.

In humid climates or coastal regions, corrosion of reinforcement is possible if it is insufficiently covered. This can lead to expansion cracks.

Concrete is only fire resistance up to about 500·C. At this temperature steel reinforcement is no longer effective. After fire, RCC structures usually have to be demolished.

1/2 - 4 Inch Brass Stem Aluminum Handwheel Gate Globe Valve, other than in the form of aggregate for new concrete.

Remedies

460ml Glassware/Wine /Alcohol/Spirits/Glass Vodka Bottle, grading of aggregates, testing, quality control and by substitution with cheaper pozzolanas.

2018 New Womens Wholesale Gym Wear High Waist Leggings Yoga Pants-carbon steel wire.