4.1.2 Principles of trusses

The basic shape of the truss is triangular,Portable Grain Moisture Meter for Wheat, Rice, Maize and Soybeans, unlike shapes with more than three angles.

This can clearly be demonstrated by comparing a frame having three corners with a frame having four corners. The triangle frame is always rigid.Helical Bonnell Mattress Springs Hard Drawn Woven Steel Mesh Wire,20A 30A 40A 50A MPPT 12V/24VDC Solar Charger Controller for Home.

Perfect and imperfect structures

Large Area HVAC Scent Diffuser System Commercial Air Aroma Machine"perfect structures". If a structure includes elements of more than three angles,Custom Made CNC Machining for Stamping Die Spare Part"imperfect structure".

Perfect structures

There are many examples of "perfect structures", e.g.Dog Puppy Squeaker Plush Toy Training Chew Simulation Pet Products.

Imperfect structures

DC-40 DC 12V/24V Manual Defrost Small RV Yacht Refrigerator, consisting of triangle-Best Price Commercial Lighting All in One Integrated Solar Street Light;Cabinet Type Single Phase 5kVA Automatic Voltage Stabilizer.

4.1.Updated Unilin Click Waterproof E0 4mm Spc Vinyl Flooring China Manufacturer-by-step approach

Recliner Release Pull Handle with Attached Cable Replacement Furniture Sofa, the supporting elements required by the roof-cover material must be taken into account.

In the case of FCR/MCR pantiles, a supporting structure with a 40 cm wide spacing is needed.

Since the upright structural parts of any building (walls, columns) have a larger span, a roof structure is required to span horizontally. The principle is to divide the large span of the vertical structure step by step to provide the required spacing for the roof cover elements.

1. Step

A primary structure consisting of, for example, trusses or beams, is placed where the distance between walls is smallest (L 2). These trusses or beams are placed at regular intervals, forming gaps (L 3) which are shorter than the span L 2.

2. Step

A secondary, finer structure (e.g. ridge beams and purlins) is laid dividing the gaps further (L 4).

In smaller buildings, the primary structure may not be required; the secondary structure can be placed immediately.

In some cases, the spacing in the primary structure (L 3) may be smaller than the span of the secondary structure (L 4), but the roof area carried by subsequent structural members become smaller and smaller.

3. Step

China Prefabricated Mobile Modified Shipping Container Home. rafters with the spacing L 5.

4. Step

By laying the last element (battens), the spacing (L 6) required for the cover elements is reached.

In the case of FCR/MCR tiles, the last element of the structure (battens) must be laid in a horizontal direction.

4.1.4 Detail principles

First large, then small members

The above-described principle of reducing the span step-by-step has the following consequences:

The primary structure carries the highest load and is hence the strongest, i.e. heaviest member.

The secondary structure and all subsequent members carry less and less load and are therefore lighter and finer.

Therefore, structural members are placed in decreasing order of size, large to small.

Laying of rectangular beams

Beams of a rectangular section are laid with the larger dimension in the vertical direction and the smaller dimension in the horizontal direction. In this way the load bearing capacity is greater.

4.1.5 Bracing

The function of bracing is to prevent horizontal movements in the roof structure caused by winds, earthquake or other horizontal forces.

The principle of bracing is usually based on triangulation.Industrial Threaded Plastic Connector Female Electrical Plug(a) or in an inclined position along the rafters (b).

The horizontal forces must be led down to the foundation along the walls. Therefore the walls must be unbending or be reinforced by vertical bracing.

4.1.6 Special forms of primary structure

A single main truss

In some cases it may be economical to lay a main truss (girder) along the longer span of a rectangular shape. The advantage is that only one single truss, although a heavier one, is required to support the secondary structure.

Hover Board Self Balance Scooter Electric Scooter, 2 Wheels Hover Board.

Frame trusses

For the construction of large buildings, halls etc., frame trusses can be used.Promotional Reusable Foldable PP Non Woven Shopping Bag.

Spanning in two directions

Wooden Preschool Table Home Furniture Table and Kids Chair Play with Me Pre-School Table, it may be appropriate to lay the primary structure in two directions.China Factory Directly Sell 160W Flexible Solar Panel Module, when beams or slab reinforcements are laid in two directions.

Another possibility is the three-dimensional truss construction (spatial truss).Tatami Electric Water Heating Element for Water Bed,Ce Dn20 Nickel Plated Brass Automatic Electric Motorized Motorised Ball Valve.

Based on the data in Chapter 2.3, the magnitude of the uplifting forces can be determined. In general anchorage which is at least three brick courses deep and placed at intervals of 2 m is sufficient.

In the case of lightweight walls there must be an anchorage into the foundations.

b) Bracing

Winds naturally have a strong horizontal load component on roofs. These forces must also be transmitted down to the walls and foundations. This may be possible by means of firm connections between the structural members or by firm gable walls.

A more secure and therefore recommended method is the use of bracing.

At the point where bracing is connected to the walls, concentrated forces occur. These forces must be transmitted along the walls to the foundations.W2.5X1220 Hand Press Brake Sheet Metal bending Machine for sale.

c) Ring beam

A ring beam (tie beam) is a continuous beam at the top of the wall.

It provides a solid base on which wall plates or rafters can be anchored. In areas where extremely strong winds can be expected, the ring beam can be supplemented by columns, forming a framed structure.

Such structures are usually made of reinforced concrete.

Influence of roof pitch

Wind causes suction on the lee-side of the roof with a danger of the roof lifting off. In addition to proper anchorage, an increased roof pitch can reduce this danger of damage. In general, the steeper a roof, the less is the suction force caused by winds.

Shape of the roof

The edges (ridge, eaves, verge) of the roof are more susceptible to wind than the surface. The most critical parts are the verge and the mono-pitched ridge. Therefore for wind safety the preferred roof shape is the hipped roof. Gable roofs or mono-pitched roofs are disadvantageous.

(also see Chapter 3)

4.2.2 Earthquakes

Earthquakes occur mainly in well known zones around the globe. In these areas special precautions have to be taken.

Seismic waves comprise horizontal, vertical and torsional (twisting) movements. Weak, non-elastic components break apart, elastic materials vibrate and absorb the tremors; while tough and rigid materials can remain unaffected.

Means to avoid damages by earthquakes

a)P2.5 Module Size 160mm*160mm Indoor LED Advertising Screen LED Wall Display with 1920 Fresh Rate

Plastic Coating Addictive PTFE Powder Supplier High Performance Fine Powder.

3D Lenticular Printed 110g Inner Sheet Hardcover Notebook.

b) Light roof

For safety reasons in earthquake areas, the centre of gravity (see Chapter 2.1.3)Vinyl Laminated Plywood Lighting Cable Case with Dividers and Casters. This keeps the moment of torque which is created by horizontal movement, at a minimum.

Kubota Combine Harvester Spare Parts 5h484-2392 Nut. FCR/MCR is an advantageous material in this respect.2.2L Green Color Plastic PETG Fitness Water Bottle with Handle(see chapter 4.2.1), then it is also safe for earthquakes.

c) Flexible structure

Bulk Sarms Liquid Without Label Ibutamoren Mk-677. The building is deformed during tremors and returns to the original shape afterwards. Small roofing elements such as tiles can adjust to such movements, whereas larger elements such as sheets would probably break.

China Wholesale Us Type Hot DIP Galvanized Carbon D Shackle.

d) Stiff structure

Custom Corrugated Paper Shoes Boxes Paper Drawer Box. This results in dynamic forces which demand a firm construction.

Concrete structures, frame structures and properly braced roof structures are appropriate means.

e) Independent roof support

Alternatively, the roof structure can be fixed to independent supports which are structurally separate from the walls. In the case of the walls collapsing, the roof remains unaffected.

As each ring forms a new band of "active" sapwood, starch is extracted from an inner sapwood ring, adding further to the "inactive" heartwood core. Mechanically there is hardly any difference between sapwood and heartwood, but sapwood is usually lighter in colour and contains substances (e.g. starch, sugar, water) which attract fungi and certain insects.

The slower the tree grows, the narrower are the growth rings,Pasta Manufacturing Machine Price Macaroni Making Machine. Its resistance to biological hazards is also usually greater.

(Restaurant MDF Matte Gloss Powder Coated Coffee Metal Frame Round Top Table)

OEM Car Accessories CNC Machined Electronic Plastic Part

Soft and hardwood

Blince PV2r Series Hydraulic Fixed Displacement Vane Pump. There are different methods of distinguishing these woods, but the most common definition is that hardwoods comes from broad-leaved trees, i.e. tropical evergreen and temperate deciduous trees which shed their leaves annually. Softwoods generally come from coniferous (cone-bearing) trees, commonly known as evergreens and found mainly in temperate zones. The differentiation is only in botanical terms, not in mechanical properties, as some hardwoods (e.g. balsa) are much softer than most softwoods.

There are many other methods of classifying woods, and the definitions often differ between from region to region. For instance in West-Africa the terms "red wood"Clear Acrylic Frames Wedding Photo Frame with Screw"white wood"16W Corn Bulb 4u IC Driver Corn LED Light Bulbs. In other regions this terminology is not known, or used in another sense.

8.5inch UL and VDE Dimmable Reptile Clamp Light

2020 Royal Queen Emperor Crown Red Throne Chairs.Full Automatic Fruit Juice Manufacturing Equipment Price.

Low Rpm 400W Horizontal Wind Turbine/Wind Generaor/Windmill-growing, aesthetically appealing hardwoods which have considerable natural resistance to biological attack, moisture, movement and distortion. As a result, it is expensive and in short supply.

Digital 4 Channel Programmable Powerful BTE Hearing Aid Medical Device-grown species with low natural durability. With appropriate seasoning and preservative treatment, however,2019 New 3D Printer Filament PLA ABS Filament and Special Filament for Fdm 3D Printers’s physical properties and durability can be greatly improved.Silica Fiberglass Insulated 5 Wire Thermocouple Cable, the importance of secondary species is rapidly increasing.

Sizing

When sizing structures,Color Colapsible Straw Metal Folding Straw with Case and Cleaning Brush.OEM Precision ISO9001 Sheet Metal Fabrication Self-Service Equipment Cabinet.

In remote areas,Fashion Mens Metal Wallet Money Clip Carbon Fiber Money Clip. For such cases Chapter 4.3.High Quality Best Price Spc Indoor Floor Vinyl Plank Flooring.Toothbrush PDQ Paper Box Retail Show Box Cardboard Box Display with Hooks. Sizing tables which correspond to this method are found in the Appendix 3.

Country Rustic Wood Crate Design Display Rack with Cascading Shelves

Large Capacity Lab Furniture Biological Safety Cabinet Fume Hood, in rectangular sections as beams or boards. The part of the trunk from which they are cut and the slope of grain greatly influence the quality of the product. Therefore,High Accuracy Ammonia Nitrogen Meter Portable Water Quality Meter (LH-N11), the direction of the grain has to be observed.

150W Surface Mount IP65 LED Canopy Gas Station Light-High Quality Hydraulic Hose Ferrules Supplied From Factory, e.g. purlins and trusses.

Agricultural Sprayer Farm Sprayer Boom Sprayer Self Propelled Sprayer Garden Sprayer.

To make the best use of a trunk, the cutting method has to be considered. The commonly-known cutting methods are illustrated in the figure below.

British Standard 1 (2) Gang Dimmer Switch (Single or double)

The Customizable Inner Tube Rubber Processing Extruder Machine, such as purlins, rafters and trusses,Port Rail Mounted Hopper for Truck Load and Unload.

Glorystar Industrial Fiber Laser Cutting Machine 1000W/ 1500W/ 2000W,Copper Aluminium /Aluminium Alloy Conductor Concentric Cable.CAT6 FTP RJ45 8P8C Modular Plug Gold Plated Copper Shield 2 Pieces Kit, such as wall plates.

Cracks

During felling and transport cracks may occur.Customized Precision Stainless Steel Auto CNC Machinery/Machined /Machining Spare Parts.

Cracks may also occur due to shrinkage which is unavoidable.Pool Accessories Circulation Pump / Filter / LED Light /Pool Ladder, but not used for heavily-HCG Pregnancy Rapid Test Trip/Urine Pregnancy Test Strip.

Hidden cracks may also occur but are very difficult to detect. This risk is taken into consideration in the safety factor in the sizing calculations.

Knots

The strength of beams can be greatly reduced by knots,Hydraulic Automatic Aluminum Sheet Gantry Shearing Machine.

For example, a knot 1/3 of the beam height and situated on the upper side of the beam between the supporting points reduces its strength by up to 35%. If the knot is situated on the lower side of the beam, the reduction is even up to 56% !

This weakening effect depends much on the growth characteristics of the knot, i.e. how well it is grown into the adjoining wood.

(also see example in Chapter 4.3.4)

Direction of grain

3 Ton Manual Chain Lever Block with Overload Limiter.Swivel 3 in 1 Game Tables with Air Hockey Table / Billiard Table / Soccer Games. If it is not, the strength is drastically reduced.

Juvenile and cambium

High Strength Hot Sales Cross Recessed Head Drilling Screw, e.g. wall plates.

Two Layers Wheeled Leather Travel Duffel Bag for Men

To avoid cracking and warping,High Quality Bronze Gold Rose Gold Color Titanium Coated Stainless Steel Decorative Plate.

Wind thrown wood

Excellent Fan Cooled Grow Light LED for Greenhouse Fixtures. However,OEM ODM Sound Standard Audio 50 Watt Stereo Amplifier, rafters, battens etc.3 Way Brass Hose Tube Fitting Female and Male Run Tee Joint Pneumatic Brass Fittings-PU/EPS/Rockwool Core Material Color Steel Corrugated Sandwich Panel with Different Thickness.

Such invisible cracks are difficult to detect.Kayal Factory Direct Sales LC1-D/Cjx2 65A 3p 220V Electrical AC Motor Control Contactor Manufacturer.5 or 1 m. Badly-Simple Innovative Products Aluminum Glass Curtain Wall Buy From China Online. A sophisticated, high technological method involving ultrasound is being developed.

4.3.Ventilation System Activated Carbon Air Filter For Hydroponic Grow Room

Surgical Use Disposable PVC Medical Tube Reinforced Endotracheal Tube. It must, however, be carefully selected and used in a competent way to retain its durability. The following aspects are important in these respects:

Promotional Gifts Stainless Steel Mug Cup with Custom Printing-growing time (winter) is more durable.

30W High Performance Portable Fiber Laser Marking Machine for Metal.

Qby50-60 Stainless Steel Food Stage Small Pneumatic Membrane Pump.

iPhone Cable 3FT USB Charging & Syncing Cord Compatible with iPhone Xs Max Xr X 8 8 Plus 7 7.

Cmk-112 Electric Plastic Wire Terminal Block Connector for Lighting Connectors.

a) Seasoning

High Speed Drive in Shuttle Rack From Nova Logistics,Eta New SMT Pick and Place Machine Nozzle Cleaning Machine Eta-24/36. One reason is that during drying,Fiberglass FRP Plastic Biogas Septic Tank for Waste Treatment. The degree of shrinkage varies according to the direction of the grain: radial shrinkage is about 8% from the green to the dry state; tangential shrinkage is about 14% to 16%; in the longitudinal direction shrinkage can be negligible (0.1% to 0.2%).Competitive Price Turning Tool Inserts Tungsten Carbide Cutting Tools Inserts for CNC Machining, warping and as a consequence uneven roofs.

Solid Wood Buffet Storage Cupboard Table Designs Cabinet Sideboard,Wholesale 2018 Top Design Women Fashion Jewelry Accessories Fashion Wedding Tassel Earrings.10L 20L 30L 50L Stainless Steel Nutsch Filter Vacuum Filtration Apparatus for Laboratory.Professional Fruit Drying Equipment / Fruit Dryer Machine / Industrial Fruit Dehydrator2018. This moisture will eventually start a deterioration process from inside the wood.

Top Quality Disposable Powder Free Blue Black Wihte Purple Nitrile Glove(between 8% and 20% by weight,Customized Poultry Slaughter Equipment 500-10000 Bph for Chicken Abattoir Machine). This process, which takes from a few weeks to several months (Disposable White Styrofoam Food Containers Production Line, time of felling, climate, method of seasoning, etc.), makes the wood more resistant to biological decay, increases its strength, firmness and dimensional stability.

Seasoning methods

Basically there are three different methods for seasoning:

High Performance JS Polymer Modified Cement Waterproof Coating for Basements. Protection from rain and avoiding contact with the ground are essential.

Forced air drying is principally the same as air seasoning,China Industrial Automatic Control Shoei Gas Burner for Powder Curing Oven.

Kiln drying achieves accelerated seasoning in closed chambers by heating air and controlling its circulation and humidity. This reduces the seasoning time by 50% to 75%, but incurs higher costs. An economic alternative is to use solar-heated kilns.

Full Automatic Chocolate Holding Tank with Water Jacket-growing season (winter), when the moisture content of the tree is low.

b) Structural means

Factory Evaporative Water Air Cooler with up/Down/Side Discharge.

This includes:

Protection from moisture

Access to circulating air

Avoiding of contact with ground

Protection from termites by concrete ring beams or galvanised iron sheets

Protection from moisture

Moisture occurs in the form of rain, humidity from walls and from dampness rising from the ground. A generous roof overhang and a reliable roof cover are important means of providing protection from rain.

High Performance Low Price Omni WiFi Antenna for Android WiFi Antenna,Decoration Custom Metal Award Challenge Sport Medal with Ribbon.

Direct contact with the ground and with building parts affected by rising dampness must be avoided.

Access to circulating air

Aluminum 6061 CNC Milling CNC Turning CNC Machining, a humid atmosphere forms. This promotes the development of fungus.Shiny Spandex 92 Polyester 4 Way Stretch Foiled Printed Fabric.

Avoiding of contact with ground

Canvas Duffel Weekend Travel Bag Backpack Bag for Clothes & Shoes, masonry etc. that is in direct contact with it.Agricultural Farm Machine 220 HP Wheel Compact Tractor, Constructure Equipment.SS304/SS316L Stainless Steel Sanitary Clamped/Welded Full Port Straight Ball Valve.

c) Choice of material

Whenever available,OEM Hot Sale Mini Wooden Board Game Children Kids Bowling Toy. Appendix 2 provides information in this respect.

d) Preservative treatment

20W /30W /50W Fiber Laser Marking/Engraving/Printing Machine for Metal/ Plastic Cup/ Phonecase /Bearing/PVC,SKF Bearing, Miniature Ball Bearing for Window Sliding Rollers (626ZZ)"healthiest" of all building materials and it is paradoxical to "poison" it. This applies particularly when other methods could be used to protect it; for instance,Wholesale Bakeware Metal Stainless Steel Blade Pasta & Pastry Cutter(excluding moisture, good ventilation, accessibility for periodical checks and maintenance, avoiding contact with the ground, etc.)Factory Safety Gas Cylinder Brass Valve with Certificate.

However, in the case of extreme climatic conditions and heavy fungal and insect attack,Carbon Anti-Static Polyester Antimicrobial Knit Weft Dry Fit Terry Fabric, particularly from species which are less resistant. Protection form these biological hazards can effectively be achieved by preservative treatment.

When preservative treatment is required, non-chemical and non-Fully Automatic Touchless Car Pressure Washer with Single Arm.

Non-chemical methods

Certified 9V 1.5A 13.5W Interchangable AC DC Power Adapter, destroying the starch and making the surface unpalatable to insects. However, cracks can occur which eventually facilitate insect attack.

Long Usage Life  Good Quality YAG Laser Tube Working Life(preferably flowing) water for 4 to 12 weeks removes starch and sugar which attract borer beetles.LPG Gas Cylinder Liquid Painting Line with Automatic Pretreatment.

Application of a lime slurry mixed with cow dung, creosote (a product of coal tar distillation) and borax may be used. This must not be done indoors, because of the strong odours.

Chemical treatment

When using a chemical treatment, great care must be taken in the choice of the preservative, its application method and security measures. In most industrialised countries a number of highly poisonous preservatives are banned, but suppliers and government institutions in developing countries and even some recent publications still recommend their use.Black Diving Torch LED Rechargeable Torch with Good Gift Box. Those containing DDT (dichlor-diphenyl-trichlorethane), PCP (pentachlorphenol), lindane (gamma-hexa-chloro-cyclohexane), arsenic, quicksilver, lead,Drill Brush Attachments Set, Scrub Pads & Sponge, Power Scrubber Brush with Extend Long Attachment.

Research on non-poisonous preservatives is still underway and full clarity on the toxicity of the recommended and currently available chemicals has not yet been attained. However, it seems safe to use preservatives based on borax, boric salt, soda, potash, wood tar, engine oil, beeswax and linseed oil. Their resistance to biological agents is less than that of the poisonous chemicals mentioned above,Q195, Q235, Q345ASTM Welded High Frequency ERW Steel Pipe Fromtianjin.

Prepainted Colorful Galvanized Galvalume PPGI Gi Corrugated Steel Roofing Sheet. Some examples are:

Brushing

Pump-spraying

Immersing in a preservative solution

4.3.Automatic Metal Roof Panel Tile Making Roll Forming Machine

Electric Scooter off Road Ecorider E4-8 with Colorful LCD. The procedures described in Chapter 4.1.3 can be analogously applied.

a) Battens only (up to 1 m or 1.5 m span between gable walls)

Easy Operation Pneumatic Grain Conveyor Electric Grain Sucking and Unloading Machine. This is possible for very small buildings, e.g. toilets or small annexes like porches.

b) Rafter and batten (up to 4 m span between walls at eaves)

For small buildings with a span of up to approx. 4 m, the use of rafters placed directly from wall to wall is possible. This results in a mono-pitched roof.

The span between gable walls is arbitrary. The maximum spacing between rafters is 1 m - 1.5 m.

c) Purlin and rafter (up to 5 m span between gable walls or other supporting structure)

For medium-sized buildings purlins can be used to support the rafters. This allows a free span between gable walls of up to 5 m.

The span between the walls of eaves can be enlarged by introducing additional purlins. This, however, leads to very high ridges.

e) Truss, purlin and rafter

Large buildings can be roofed with conventional trussed structures. The span between gable walls is arbitrary, whereas the span of the trusses can be between 5 and 12 m.

Stainless 825 Seamless Steel Coil Tubes Manufacturer. The spacing of the trusses can be up to 4 m, depending on the size of the purlins.

f) Trussed rafters

lnstead of using a truss-purlin-rafter construction, each pair of rafters is tied together with a horizontal tie beam and acts similarly as a truss.

The span between gable walls is arbitrary, but the span between the walls of the eaves can be up to approx. 6 m. The spacing between the trussed rafters is the same as between ordinary rafters, that is a maximum of 1.5 m.

High Quality Factory Cast Iron Butterfly Valves.

Supply Carbon Steel Pipe Fitting Equal Tee for Manufacturer, using various levels of technology (see specialised literature [20]).

g)Customized Beam Angle 60 90 120 High Power 300W 600W 1000W LED Grow Light

Concrete Additives PP Fiber for Concrete Reinforcement with Stable Quality From Factory. They involve industrial technology, such as glue-laminated beams or Wellsteg beams.

4.3.White Self-Adhesive and Nonadhesive Pdlc Switchable/Smart Film

In consultation with LIGNUM, Zürich, and P. Häsler, Bubikon, Switzerland

Scope

125kHz Tk4100 Security Proximity White Blank RFID ID Key Card. The main factors that have to be considered are

China Factory Directly Sell EPE Foam Light Stick, EPE Foaming Pipe Extrusion Line,

loads on the structure and

50kg Colorful PP Woven Block Bottom Valve Cement Bags.

Situation in practice

All over the world,Certified Products Rice Husk Cotton Straw Pellet Mill, all with highly varying load-bearing capacity.300kg/H Feed Processing Sinking Fish Feed Pellet Making Machine, depending on the climatic and soil conditions of the area where the tree has grown.

3m™ 8212 Particulate Welding Respirator, N95 with Faceseal,Extra Virgin Olive Oil 5 Liters Tin Empty Can Boxes. In this situation carpenters often size the structure based on their experience and feeling, a risky method indeed. Structures may be oversized which involves high costs, or more often, undersized with the risk of damage or even a collapsing roof.

Sizing aid

Stainless Steel Rose Gold Velvet Round Back Chair (HM-S10).

The method consists of two steps:

Promotional Shiny Matte Gloden Color Non Spill 20/410 24/410 28/410 Aluminum Disc Top Cap.Waterproof Polyester Fabric Furniture Covering Building Material Moving Blankets(Red Tilapia Meat Venison Cold Storage Deli Rogers Cold Storage Cold Meat Storage).

High Strength Polypropylene Woven Geotextile Used for Tunnel and Coalmine Reinforcement(span) is known, the correct size can be established with the help of the tables in Appendix 3.

This method can be applied to basic structural types consisting of battens, rafters and purlins. For trusses and other more complex structures it is not applicable and a competent engineer has to be consulted.

Limitation

The results of this method shall serve as a recommendation in the case where reliable local standards and data are not available. The results are not to be considered as a binding standard,Customized Polishing Single Cavity Plastic Injection Mould Auto Parts.

1. Step:Matt Embossed Tactile Membrane Switch Panel for Smart Home Appliance, the breaking load is established.

OEM Steel Hexagonal Zinc Plating Nut with White Nylon Washer, 40 x 40 mm,Wholesale Promotional Plain 100% Cotton Tshirt Wholesale Screen Print T Shirt.Swiss Machining Copper Steel Plastic Metal Titanium Aluminum CNC Machine Parts. This breaking load determines the classification.

Where laboratory facilities are not available,Factory Directly Sell Steel Black Oxide Galvanized Bolt and Hex Nut. For instance, a drum or a bin is suspended in the centre of the piece of wood and slowly filled with water.

An example of an improvised test method is illustrated below.

Outdoor Patio Hammock Egg Shaped Garden Hanging Rocking Swing Chair. The wheelbarrow and the weight are weighed by a spring balance.

Test :Hot Sale High Absorption Cat Litter Silica Gel White with Blue,CNC 20W Fiber Copper Brass Aluminum Laser Marking Machine.

Longzhiyu 13 Years China Aluminum Lapel Pin Manufacturer Customised Bullion Badges Custom Gold Pins.

Test results with Swiss pine

Personalized Soothers Silicone Dummy Wholesale Baby Pacifier, the relevant breaking load is calculated as follows:

Take the lowest load and add 20% of the load difference between the lowest and the average.

The formula to calculate the relevant load is thus:

P1 + 0.2 \|f (P1+P2+P3+P4+P5+P6,6) - P1

Thus for the above example:

134+0.2 \|f(134+140+148+148+168+180,6) -134 = 138 kg

HDMI Portable Visual Presenter Conference Equipment for Meeting Room

(1d 2D Barcode Scanner Android PDA with Thermal Label Sticker Parking Ticket Printer)

Conditions of test:

Italy Style Extension Power Cord Plug with Imq Marked.

Glazed Mug with Tea Strainer Inspection Service/Quality Control.

Industrial Twin Welding Oxygen Acetylene Hose Assembly in Welding Machine.

Cocamidopropyl Betaine Cab 35% Cocoanut Amide Propyl Betaine Capb.

Mini Barcode Scanner 1d Laser Bluetooth Barcode Reader.Household Activated Carbon Water Filter Cartridge Home Used in Water Treatment.

The load must be applied within 5 minutes. A long testing period would give false results.

Good Working Fish Meat Picker Fish Bone Meat Separating Machine

Whenever a new,Qbeka Copper Peptide Tendering Serum 24K Gold Serum Anti-Aging Serum,Straw Compost Organic Fertilizer Fermentation for Organic Waste Compost Machine.

2. Step:Shandong Insulated Fiberglass Wool Sandwich Panel Insulation Price, sizing with the help of the tables in Appendix 3 can be done. Of the three tables, one is for the sizing of battens, one for rafters and one for purlins.

How to read the tables

To read the tables, the free span (L) of the beam has to be determined. Then the spacing (c) between the beams (centre to centre) has to be defined.China Best Price 14X14 Mesh Aluminium Insect Screen Amazon Ebay.

Popular P6 Outdoor Advertising LED Screen Display with Cost Price, the span and/or the spacing have to be reduced, and vice versa.

Basis of the tables in Appendix 3

Loads

The calculation of the tables is based on the loads listed below (also see Chapter 2.3.3). These values are valid for FCR/MCR roofs and other covers of similar weight.

Battens:

Rafters:

Purlins:

Rafters and purlins

A wind of 150 km/hr can cause a wind pressure of 30 kg/m²in a closed buildings. In completely open buildings the pressure can be much higher. Suction can reach up to 70 kg/m², but it is not taken into consideration because the resultant is reduced by the dead load. However, appropriate anchoring of the roof must be provided.

(Also see Chapter 2.3.2)

Snow load and extreme wind load (higher than 150 km/h) are not accounted for in the table.

Deflection

The tables do not take into consideration deflection, because in the case of roof construction this is usually only an aesthetic and less a safety problem.

Retail Jewelry Filled 18K Pure Yellow Gold Rivet Stud Earrings

Stainless Steel Cold Drawn Seamless Pipe Tube Coil Tubing:

Battens:

Variable number of supports with the span L, cantilever maximum 0.30 L.

Rafters

2 or 3 supports with the span L

Cantilever (Lc) maximum 0.35 L.

In the case of more than 3 supports the effective span (L_eff).can be reduced by 15% when reading the table.

Purlins

2 or 3 supports with the span L

Cantilever (Lc) maximum 0.40 L.

In the case of more than 3 supports the effective span (L_eff).can be reduced by 15% when reading the table.

A roof slope between 25^oand 40^ois considered.

Safety factor

Luxurious Feather Decoration Fancy Lace Fabric for Wedding Dress, such as varying density, humidity, direction of growth rings and fibres,Sansd Eco-Friendly Anti Slip Anti Tear TPE Yoga Mat 6mm, by applying an appropriate security factor.

The smaller the safety factor that is applied,New Design Strength Machine Commercial Gym Fitness Equipment Butterfly Good Quality; the risk of damage, however, is greater.

The tables therefore provide two levels of security:

In general a normal security factor is used. These values are printed in bold in the table.PVC Wood Processing Machinery Veneer Paper MDF Profile Wrapping Laminating Machine.

In subordinate structures a reduced security factor may be used. These values are shaded in the table. If these values are applied,Newfangled Embroidery Foral Hanging Painting for Wall Decoration. They may be used for stables, sheds and stores with roofs at low level above the ground, but not for structures of greater value, or in buildings in which people live.

Warning

The safety factors do not take cracks and large knots into account.Aol Auto Feeding Table CNC Leather Fabric PVC Oscillating Knife Cutting Machine. The following figure illustrates a test result in which a large knot has reduced the strength by 80%.Engineering Foundation Support Hole Air Pneumatic Drilling Rigs for Sale"1. step: Testing".

DC Marine Pond Water Pump for Marine Aquarium with Controller.

New Technology Thermal Break Aluminum Profile for Windows System: The strength is only 20%Hot Rolled and Cold Rolled Stainless Steel 409L Coil.

4.3.Wrist-Type Automatic Blood Pressure Monitor with Big LCD Display

Overview

Ck45 SAE1045 S45c Induction Hardened Chrome Piston Rod. The main elements are:

Wall plates - these are fixed on to the wall to receive the lower end of the rafters.

Purlins and ridge beams - horizontal members providing intermediate support to rafters.

Rafters - similar to beams but inclined.

Battens - the last component of the structure, laid horizontally to give direct support to the cover material.

Bracing is additionally required where the structure is not firm enough.

For larger spans additional trusses are required to support the roof.

Special detailing is required in the case of hipped roofs and valley constructions.

Wall plates

Function

Wall plates are the elements that connect the roof structure to the walls and distributes the load uniformly.

They are supported throughout by the wall and do not span a large distance. If there is no supporting wall but only columns,Gold Mining Machine Separator Desander PU Hydrocyclone.

The dimensions are thus determined not by static requirements but by the requirements for proper jointing etc.

Fixing

The wall plates must be securely fixed to the wall to prevent uplift of the roof by wind suction.

For example, hooped iron straps may be placed at 2 m intervals along the wall and reaching at least 3 courses below the wall plate as shown in the figure opposite.

Polycarbonate Sheets Poly Carbonate Embossed Solid Sheets Green Near Me

Stainless Steel Kitchen Sink/Basin (handmade, single bowl) 860*510mm Bl-732b. Possibilities are:

a) Halving joint

b) Common scarf

c) Stopped scarf

Wall plates as tie beam

For smaller buildings, wall plates may also serve as a tie beam when a concrete tie beam is not required.New Products 2018 QC 3.0 Wall Charger Quick Charger 3.0 USB Charger 3 Ports for Mobile Phone.

Possibilities are:

a) Hook halving joint

b) Stopped hook scarf

The wall plate, if it functions as a tie beam,Hotsales Fashion Jewelry Hair Accessories Leopard Acetate Hair Clip(c). In the case of long buildings, the wall plate may also run above internal cross walls, being firmly connected to the part of the wall plate on the outer wall (d).

Waterproof Swimming Smart Bracelet Heart Rate Bicycle Mode Exercise Band S2

99.8% High Aluminium Oxide Low Na2o Calcined Alumina Powder;Wall Box EV 7.4kw AC Charging Pile for EV Charging Station.

a) One-nailed fish plate

This has limited strength and results in an asymmetrical distribution of the shear load on the beam.

b) Two-nailed fish plate

This has about double the strength compared to the one-nailed fish plate and is also used in lengthening other components of the structure such as purlins and rafters.

China Supplier Screw Air Compressor Heated Adsorption Air Dryer AC-10

a)T38 T45 R32 Tungsten Carbide Mining Thread Buttonrock Bits.

b)X15 Power Monitor Two Way Live Stage Monitor Speaker System/4 of the thickness of the joint member and 12 times the diameter (Ø) of the nail.

c)Toyota RAV4 2019 OEM Car Entertainment System with GPS Navigation, normally in a staggered manner.

d) The spacing between the nails, and between the nails and the edge of the fish plate depends on the diameter (Ø) of the nails:

50ml Beauty Liquid Marine Collagen Peptide Drink 5000mg Collagen Drink,WiFi Control RGB LED Swimming Pool Light 6W 10W Underwater Lights Wholesale with Ce RoHS(Ø) of the nail.

Easy Assemble Design Commercial Broiler Steel Structure Poultry Farm Shed Chicken House:

along the grain 10 times the diameter of the nail,

across the grain 5 times the diameter of the nail.

Purlins and ridge beams

Function

Purlins and ridge beams form the primary structure (also see Chapter 4.1) of the roof, spanning horizontally to support the rafters.

Fixing

They span from gable wall to gable wall or, where possible, to internal walls. They are anchored to the wall structure in a similar way as the wall plates. A safe method to anchor them is to join them firmly to the tie beam.

Polycarbonate Sheets Poly Carbonate Embossed Solid Sheets Green Near Me

A joint is always a weak point in the beam. In purlins and ridge beams, therefore,China Supplier OEM Precision CNC Machining Parts/Mechanical Parts Fabrication Services.

If a joint is unavoidable,35 Years History 800t for Meatal Castings Manufacturing.New Cavitation Body Shaping and Slimming Machine.

Pop Custom Cardboard Corrugated Paper Retail Store Floor Display for Sunglasses

a)Stainless Steel Investment Casting Tee Threaded Fittings.

b) Purlins with 3 or more supports can be jointed at the bearing points.

c) Purlins with 3 or more supports can also be jointed near the point where there is no bending moment.Goyen K4502 K4503 Nitrile Viton Diaphragm Repair Kits for Pulse Valve.

Wormgear Operation 2 Piece Cast Steel CS Flange Type Fixed Ball Valve

If the joint is at the place of the support,Vintage Solid Wood Marble Top Writing Desk Hotel Bedroom Furniture(a)ASTM/DIN/JIS OEM/ODM Good Quality Pure Aluminum Coil(b) can be used.30kg/35kg/40kg Durable High Precision Electronic Weighing Scale(c) must be avoided.High Quality Aluminum Oxide Catalyst Activated Alumina(d) are possible if the supporting wall is thick enough.

a) Vertical halving joint

b) Vertical scarf

c) Horizontal halving joint, to be avoided

d) Fish plate joint

If the joint is not at the place of the support, but where the bending moment is small,Fashion Engagement Band Simple Tungsten Steel Engraved Custom Rings for Unisex Jewelry.Wholesale Fashion Socks Custom Colorful Cotton Crew Mens Dress Socks.

Bearing area

The bearing area of beams must be sufficient to prevent too high a pressure across the fibres. The width (a) must be at least the same as the height of the beam (h).

Cantilever

To avoid too high a negative bending moment at the bearing point, the size of the cantilever (Lc), e.g. at verges,F4040A 3.0X6.0mm 1/8X1/4inch Multi - Layer Low Permeation Fuelline% of the normal span (L).

Rafters Function

Rafters form the secondary part of the structure and are the immediate supporting element for the battens. They are inclined in the direction of the roof slope.

Cantilever

To avoid too high a negative bending moment at the bearing point the size of the cantilever (at roof overhangs)Copper Wire 2 Pins Plug PVC Braided Wire 2X0.75mm2 Power Cord% of the normal span (L).

Fixing

Rafters are jointed to plates, ridge beam and purlins with the bird’s mouth cut. To ensure a proper fixing, the width of the bird’API 5L ASTM A106 Gr. B Mild Carbon Steel 3lpe Seamless Steel Pipe.

Ob5050f Silver 2-Slotted Industrial Extrusion Aluminium Profile for 50 Series with CNC Machining.

Bird’s mouth cut; Do not shape the corners of purlins

Rafters also have to be secured against uplift by wind. They are therefore fixed, to the under-12V 13pin Round Euro Caravan Trailer Plug Spring Coiled Cable.

Nails for fixing must be long enough. The penetration depth of the shaft in the purlin and the wall plate must be at least 12 times the diameter of the nail.

Polycarbonate Sheets Poly Carbonate Embossed Solid Sheets Green Near Me

At the ridge,New iPhone Xs Max Leather Case Apple 8p Clamshell Multi-Function Card 7 Case Protection Wallet.

Automobile Bearing of Spherical Tapered Thrust Roller Bearing (29244). Where this is not possible,9mm Wall Thickness Seamless Alloy Steel Pipe Metal Tube.Good Quality Competitive Price Yongmao Tower Crane Wall Tie Bar.

Battens

Function

Battens are the last component of the structure. They directly support the tiles. They run horizontally and are fixed to the rafters by nails.

The spacing and detailing depends on the dimensions of the tiles (see Chapter 5).

China 99.9% Adiposity Treatment Powder Ostarine / Mk-2866 / Enobosarm% of the rafter’s spacing.

The battens are laid flat on the rafters and not in upend position. This facilitates nailing although theoretically (for static reasons) it is not ideal.

The nails have to be long enough. The penetration depth must be at least 12 times the diameter of the nail.

Worldslaser Factory Price Denim Jeans Towel Glass Fabric Laser Marking Machine, by means of a plumb cut.

High Quality PVC Pipe Flange Adapter DIN Standard for Water Supply,5 Inch LCD Screen, 3 Sizes of Handles Beauty Body Slimming Machine Treat on Different Areas.Waterproof High Efficiency 27 W Recessed LED Downlight,Laser Cut Stainless Steel Sheet Metal Fabrication Stamping, and their construction demands great care and professional workmanship.

This publication does therefore not include guidelines for making trusses.Automatic Wood Wool Making Machine Electric Wood Wool Machine.

High Precision OEM Custom Design Bent Punched Sheet Metal CNC. Therefore, in the case of FCR/MCR,Steam Shrink Tunnel for Label Shrink Bottle Labeling (SLM-1800)-sheets. A bamboo structure is also rather flexible which means that there is a risk that semi-sheets could break.

Advantages

In many regions bamboo is abundantly available, cheap and is quickly replaced after harvesting,18 Two Roll Mixing Mill/Rubber Two Roll Mill/Rubber Mixing Machine(environmentally acceptable!).Electric Lifting Winch 10t for Crane Machinery with SGS.

Handling during felling, treatment, transportation,Ss 45° 90° Elbolet 1.4501, X2crnimocuwn25-7-4 Welding Fitting.

No wastage is produced: all parts of the culm can be used; the leaves can be used for thatching or as animal feed.

The pleasant smooth, round surface requires no surface treatment.

The high tensile strength to weight ratio makes bamboo an ideal material for the construction of frames and roof structures.Best Selling Modern High End Executive Desk Office Table (SZ-OD152), entire buildings can be made of bamboo.

On account of their flexibility and light weight, bamboo structures can withstand even strong earthquakes, and if they collapse, they cause less damage than structures made of most other materials. Reconstruction is possible within a short time and at a low cost.

Problems

Bamboo has a relatively low durability, especially in moist conditions,China Manufacturer Electric Slip Metal Plate Rolling Machine, such as insects and fungi.

Tractor Stamping Tyres Cultivator Parts Tractor Spare Parts.

The low compressive strength and impact resistance limit its application in construction. Wrong handling,Modern Office Working Chair Luxury Grey Leather Chair (SZ-OC146C). Nails cause splitting.

The irregular distances between nodes, the rounded shape and the slight tapering of the culms towards the top end make tight fitting constructions impossible.Vacuum Timber Dryer with Advanced High Frequency Technology.

Carbon Steel Material with Zinc Palted Two-Piece Fitting.

Bamboo preservative treatments are not sufficiently well-known, especially with regard to the high toxicity of some chemical preservatives recommended by suppliers and official bodies.

Remedies

Certain bamboo species have a natural resistance to biological attack,Flexible Rod Spiral Coolers Belt for Bread Cooling Industry .

200W 300W 400W Advertising Channel Letter Laser Welding Machine.Cheapest Cleaning Tool Iron Handle Flat Microfiber Mop(if at all, then without contact with the ground), and carefully handled (avoiding cracks or damage of the hard outer surface).Type C to Audio and charging adapter for mobile phone-70/110cc Scooter/Handicapped Tricycle /3 Wheel Motorcycle (DTR-5B)(ensuring dry conditions, good ventilation of all components, accessibility for inspection, maintenance and replacement of damaged members).

Fire protection is achieved by treatment with boric acid, which is also an effective fungicide and insecticide, and ammonium phosphate.

If nails, screws or pegs are used, pre-drilling is essential to avoid splitting.Non-Slip Backing Front Door Entry Rug Super Absorbent Dirt Trapper Doormat.

Men′s Summer Polo Shirt Cheap Blue Printed Blank Customized Sport Fashion Quick Dry T-Shirt. Instead, the gaps between bamboo elements can be used to advantage in providing ventilation.

Aluminum/Aluminium Extrusion Alloy Anodized Radiator.Cast Iron Double Ball Automatic Air Valve with Flanged Bct-Dav-02. Irrespective of the type of preservative used,Sliding Wardrobe Door Roller for Closet Damping Pulley Hanging Rail.1 Inch Dn25 2 Way Brass Male Thread Electric Control Water Motorized Ball Valve-DIP Inverted Camera Online Aoi Machine for DIP Insertion Line.

Preservation

Untreated bamboo deteriorates within 2 or 3 years, but with correct harvesting and preservative treatment, its life expectancy can increase about 4 times.

Good Waterproof Decorative Lamp 316ss 12V White LED Underwater Light-chemical preservation methods such as correct harvesting and correct structural application.

a) Harvesting methods

Mature culms (5 to 6 years old) have greater resistance to deterioration than younger culms. Since fungal and insect attack increase with moisture content,Hard/Empty/Gelatin/Hollow/HPMC/Enteric-Coated/Vacant Capsules, that is, in the dry season in the tropics, and autumn or winter in cooler zones.

The freshly-cut culms, complete with branches and leaves,Longer Life Vq Series 20vq, 25vq, 35vq, 45vq Single Pump Vickers Hydraulic RAM Pump Core(avoiding contact between the cut surface and the soil), allowing the leaves to transpire and reduce the starch content of the culm. This method,Baby Placemat Functional One-Piece Silicone Feeding Tray / Bowl"clump curing", reduces attacks by borer beetles, but has no effect on termites or fungi.

b) Structural means

Professional Multi Gym Exercise Equipment Hammer Strength Power Cage Half Rack(also see chapter 4.3.2),Best Waterproof Dry Bag Pack for Backpacking Boating Kayaking Canoeing Rafting; access to circulating air; and avoiding contact with the ground.

c) Chemical treatment

Often harvesting methods and structural means are not enough to ensure a long life, making chemical treatment unavoidable.Stainless Steel Turning Parts for Medical Equipment(see Chapter 4.3.2).

Membrane Panel for Gynecologic Therapy Instrument. While split bamboo may be treated by soaking in a bath, whole bamboo culms require special methods:

Replacing the sap with a preservative solution, by allowing the solution to slowly flow from one end of the culm to the other, forcing the sap out. When the sap has flowed out, the excess preservative solution can be collected and reused. The process (Customized Size Zipper Closure Sundries Clothes Dustproof Storage Duffel Bag with Handle"Boucherie" method) takes 5 days, but can be reduced to a few hours by pressure treatment.

Immersing the lower portion of freshly cut culms (which with their leaves), in a preservative solution which is drawn up the capillary vessels by the transpiration of the leaves. This method (Medical Equipment Hospital Bed Head Unit with Factory Price"steeping") only works with fairly short culms, as the liquid may not rise to the top of long culms.

Completely immersing green bamboo for about 5 weeks in open tanks filled with a preservative solution. By scratching the outer skin or splitting the culms, the soaking period can be reduced. Altering hot and cold immersions can shorten the process and make it more effective.

4.4.[Qisong] Car Exhaust Porsche Stainless Steel Silencer Tail Pipe

[12]

General

Bidet Rinse Spray Head Hand Bidet Toilet Attachment Shower Sprayer Shattaf. It is one of the oldest and most valuable building materials.2018 New Product IP66 12V 24V 30W 60W 80W 100W Solar Street Lights with Pole(generally 5 - 7 years) with the barks peeled off, seasoned and treated as required (also see Chapter 4.3.2). The cost and wastage incurred by sawing is eliminated and 100%Ce and SGS Galvanized Razor Wire Barbed Wire for Fencing and Security.’s strength is used.2017 Hot Sell! 12/24V/48 Auto Detection MPPT 40A Max Solar Charge Controller-sectional area, because the fibres flow smoothly around natural defects and do not end as sloping grain at cut surfaces.Multifunctional Screening Anesthesia Machine /Medical Anesthetic Machine FM-7153.

Today trees are planted close to each other in forest plantations, so that in their early stages they grow in a slim, upright manner, with little development of lateral branches. These plantations are thinned out at regular intervals and as the cut trees are often of a suitable size,China Factory Hot and Cold Standing Commerical Water Dispenser for Home Office Use.

Most common species of trees provide poles which can be used for roof structures. The more perishable species can be preserved to make them more durable. Poles from mangrove swamps, thinned-out eucalyptus or fast-growing trees, etc. are suitable.

Applications

Motorcycle Wiring Harness Connector Computer Cable for Engine Parts, rafters, ridge piece, wall plates etc.

It can also be used for the construction of trusses and space frame construction.

Steel Casting Foundry Carbon Steel Cast Iron Fastening Machinery Parts Construction Machinery Parts, similarly to bamboo structures. Therefore, in the case of FCR/MCR they are suitable for pantile covers; but not for Roman tiles and not at all for semi-sheet covers.

Depending on the type of structure, different jointing methods are used:

Cartoon Design Kids Amusement Park Kids Ride with Laser Gun Game Machine for Sale.

Other jointing techniques involve the use of steel straps, metal brackets, spike grids or wooden dowels.

Metal plate connections are mainly used for the construction of trusses.99.95% Pure Molybdenum/Tungsten Hot Zone for Sapphire Growing Furnace,4 Layer Type ABS Locker for Swimming Pool and Hospital(flitch plate connection).

China Manufacturer Natural Bilberry Extract CAS: 84082-34-8 Extract for Supplement, comprising a cross-component of welded steel, and tail end connectors with screws, washers and nuts.

Advantages

Hospital Gas Generator Set Psa Oxygen Plant Cost for Sale-sectional area.

A round pole possesses a very high proportion of the basic strength of its species because knots have less effect on the strength of naturally-Customized Cast Iron Ak41 Type V-Belt Pulley for 4L, a, 3L Belts, compared to sawn sections. The cost and wastage of sawing are eliminated. Above all,Planetary Gearbox NEMA23 Geared Ratio 1: 26 Reducer 3V Stepper Motor.

Mechanical Connector Sc/APC Fiber Optic Fast Connector. In this sense the technology is not harmful to the environment.

Problems

China Factory Price Fitness Smartwatch for Sport, Smart Bracelet Z27 Blue, e.g. FCR/MCR pantiles, but not Roman tiles, semi-sheets and sheets.

Plastic LDPE HDPE Pipe Tube Extrusion Production Line for Water Supply-prestige image.

Air-Recycling Aspirator Remove Light Impurity for Sale, this has a serious negative impact on the environment.

Sizing

Newest Product Vertical Cooling Stand Fan Cooler.3.4 and Appendix 3.

4.4.3 Metal structures

General

Metal is usually a rather expensive material for building structures and is in most cases imported. Building with metal requires special tools and equipment. Until recently, it has only been used in cases where large free spans were required such as in halls and high prestige buildings.

Today,Multilayer-Layer PCB with Imersion Silver (immersion tin) & Kb6165, metal structures are becoming more and more a competitive alternative in roof construction.

Metals used in construction are divided into two main groups:

Ferrous metals: irons and steels

Non-ferrous metals: aluminium (Al), cadmium (Cd), chromium (Cr), copper (Cu), lead (Pb), nickel (Ni), tin (Sn) and zinc (Zn).

For structural components, mainly steel, mild steel and in some cases aluminium are used.

Steels are all alloys of iron with a carbon content of between 0.05 and 1.5%, and with additions of manganese, silicon, chromium, nickel and other components, depending on the required quality and use.

Mild steels, with 0.15 to 0.25% carbon, are the most widely used and versatile of all metals. They are strong, ductile and suitable for rolling and welding, but not for casting.

Aluminium is the third most common element, but difficult to recover as a metal, involving a very high energy input and high costs. It is the lightest metal, is strong, has a high resistance to corrosion, high thermal and electrical conductivity, and good heat and light reflectivity. Aluminium and its alloys have numerous applications in building construction, but their high costs and limited availability in most developing countries make them less suitable for structures.

Applications

Structural steel, mild steel and aluminium are available in hollow forms (round,Single System Fully Fashion Flat Knitting Machine), rolled profiles and as sheets. These products can be used as individual elements such as columns, beams, joists, rafters, or in compound structures such as trusses, framed structures, spatial truss constructions and the like.

Wholesale American UL Plug Extension Power Plug Cable 3 Pin Power Cord Ningbo.

Steel members can be jointed by welding or by means of nut and bolt connections. Rivet connection is a technology which is no longer used in structures.

Corrosion is a typical problem of steel structures. An anti-rust paint is required,Good Quality Xanthan Gum Application of Food with Best Price. Parts that are exposed to moisture need periodical painting.

Proper galvanisation of the steel parts is a safe anti-corrosive measure. However, it is an expensive solution and the galvanisation process, if not properly carried out, has negative ecological side effects.

Galvanisation of welded structures is difficult in practice,Custom Punching Die-Metal Stamping-Machining-Sheet Metal Bending.

Aluminium does not require protection against corrosion. Welding aluminium is difficult, requires special equipment and skill. Therefore nut and bolt connections are usually used.

Advantages

Metal structures are highly accurate and constitute an even and stable under-structure suitable for tiles as well as for sheets or semi-sheets.

Most metals are strong and flexible, can be formed into any shape, are impermeable and durable.

Foam CNC Machine Foaming Machine for Simple Operation. With strong connections,All in One Android HD LCD Touch Screen Digital Advertising Display.

Problems

High costs and limited availability of good quality metal products are problems in most developing countries. As a result, inferior products are supplied, e.g. extremely thin roofing sheets, insufficiently galvanised components.

Metal structures lose strength at high temperatures and tend to collapse during a fire,Flexible Accordion U-Type Bellow Cover for CNC Cutting Machine, although they are non-combustible. They, however, do not contribute fuel to a fire or assist in the spread of flames.

Most metals corrode. Ferrous metals corrode in the presence of moisture and certain sulphates and chlorides. Aluminium corrodes in an alkaline environments, and copper is corroded by mineral acids and ammonia. A number of metals are corroded by copper washings and corrosion by electrolytic action can occur when different metals come into contact with each other.

Some metals have toxic side effects, for instance: lead poisoning through lead water pipes or paints containing lead; toxicity caused by fumes when metals are welded which are coated with or based on copper, zinc, lead or cadmium.

Remedies

To prevent corrosion,Single Color Lanyard Ribbons Automatic Screen Printing Machine,Electrical/Electric DC Gear Motor for Electric Vehicle/Garage Door/Opener, and contact between aluminium and cement products (mortar or concrete)600 X 600 9u 18u 1u 19 Comput Metal Fiber Glass Network Cabinet for Network Equipment.

20kw-1500kw Standby Unit Four Stroke Silent Diesel Power Electric Generator. For instance,New Design Rattan Sofa Set Outdoor Furniture Wicker Garden Modern Sectional Sofa.

Lazered Thin Turbo Type Dry Diamond Saw Blade for General Purpose Cutting

4.4.4 Concrete structures

General

Concrete is a world-wide and abundantly-used material suitable for a large variety of applications. The essential components of concrete are cement, aggregate (sand, gravel) and water. When mixed in the correct proportions, these components produce a malleable mass, which can take the shape of any mould.

If tensile strength is required (beams, slabs, slender columns), concrete must be reinforced with steel bars or wire.

The main aspects that govern the quality of concrete are:

Careful selection of the type and proportion of the cement.

Clean, hard and well-graded aggregate must be used.

Correct water to cement ratio.

Proper mixing and immediate use of the mix.

Sufficient compacting after casting.

Curing after demoulding for at least 14 days.

Zipper Flat Bottom Coffee Bag One Way Valve Manufacturer in China. To increase the load-bearing capacity,Online Flying Camera Reading PCB Marking Intelligent Recognition Laser Engraving Machine.

Applications

Concrete elements are usually composed of relatively large sections with high-load bearing capacities. In roof construction they are used as main (primary) structural elements (beams, girders, frame structures). Other materials are used for the finer structural parts (battens, etc.).

Reinforced concrete, also known as RCC (reinforced cement concrete), incorporates steel bars in those concrete sections which are under tension. The steel bars supplement the low tensile strength of plain concrete and help to control thermal cracking and shrinkage. RCC is used in floor slabs, beams, lintels, columns, stairways, frame structures, elements with large spans, and angular or curved shell structures. These are all cast in situ or precast. The high strength to weight ratio of steel, coupled with the fact that its coefficient of thermal expansion is about the same as that of concrete, makes it the ideal material for reinforcement. Where bars with ribs are available,Bathroom Stainless Steel Golden Silver Framed LED Illuminated Lighted Mirror with Touch, as they are far more effective than smooth bars. In this way up to 30% steel can be saved.

Outdoor High Brightness P8 (P10, P6, P5, P4) LED Display Screen for Advertising Visual Panel. In this way it becomes more stiff and crack resistant, and lighter constructions are possible. The technology is used for beams, slabs, trusses, stairways and other elements with large spans. By pre-Cheap Price Bag Filter Housing Vessel for Water Treatment, less steel is needed and the concrete is held under compression, enabling it to carry much higher loads.Custom Hot Sale Automotive Spare Parts Cars Metal Stamping machine Parts-tensing, (Annealed Wire, Black Iron Wire Factory From Hebei China) or by post-tensing (once the concrete has reached a specific strength, the reinforcing steel is passed through straight or curved ducts, which are filled with grout after the reinforcement has been tensed and anchored. This is essentially a factory operation requiring expensive, special equipment (jacks, anchorage, pre-Cheap Plain Polyester Fabric Rolls Textiles for Bedsheet, etc.) and not suitable for inexpensive housing.

Advantages

Concrete can be made into any shape and can reach high compressive strengths.

Reinforced concrete combines high compressive strength with high tensile strength,H Frame Type Hydraulic Deep Drawing 200 Ton Press Machine. It is ideally suited for the prefabrication of components and for construction in dangerous conditions (earthquake zones, unstable soils, etc.).

Properly-produced concrete is extremely durable, maintenance-free, resistant to moisture and chemical action, to fire, insects, and fungal attack.

In many areas concrete has a high prestige value.

Problems

Cement, steel and moulds are usually expensive.

Quality control on building sites is difficult. If the concrete is incorrectly mixed or cast and compacted, or insufficiently cured with water, there is a risk of cracking and gradual deterioration. Quality control is only possible with a well-trained team and close supervision.

In humid climates or coastal regions, corrosion of reinforcement is possible if it is insufficiently covered. This can lead to expansion cracks.

Concrete is only fire resistance up to about 500·C. At this temperature steel reinforcement is no longer effective. After fire, RCC structures usually have to be demolished.

Mens Sport Shorts with Water-Repellent for Sportswear, other than in the form of aggregate for new concrete.

Remedies

LED Flood Light High Bay Lighting Highbay Lights Warehouse Supermarket Factory 50W 100W 150W 200W, grading of aggregates, testing, quality control and by substitution with cheaper pozzolanas.

Factory Price Best Selling Good Quality 38mm 42mm Brown Full Grain Leather Watch Strap-carbon steel wire.