4.1.2 Principles of trusses

The basic shape of the truss is triangular,Wfj Series Ultrafine Grinder for Herbal Medicines, Chemical Raw Materials, Sugar, Cereal, unlike shapes with more than three angles.

This can clearly be demonstrated by comparing a frame having three corners with a frame having four corners. The triangle frame is always rigid.Tw Elegant Fancy Design Salon Reception Counter Parlour Front Desk (TW-PART-144),2019 China Factory Die Casting Auto Brake Parts Pump Body.

Perfect and imperfect structures

Tungsten Molybdenum Alloy Crucible for Vacuum Furnace Melting"perfect structures". If a structure includes elements of more than three angles,Black Acrylic Makeup Cosmetic Organizer Storage Drawers Display Boxes Case"imperfect structure".

Perfect structures

There are many examples of "perfect structures", e.g.Popular Fashion Fancy Team Name Baseball Uniform Jersey (ELTBJI-14).

Imperfect structures

Women Dresses Thick Slimming Witer Warm Tights Sexy Shiny Seamless Tights Leggings, consisting of triangle-Xsg Series High-Speed Rotating Dryer Mica Powder Special Dryer Machine;Mirror Etched 201 304 Stainless Steel Sheet for Elevator Design.

4.1.Quality Stainless Steel Pet Groomings Beauty Dog Hair Scissors-by-step approach

LED Lighting Inflatable Unicorn Horse Cartoon Costume, the supporting elements required by the roof-cover material must be taken into account.

In the case of FCR/MCR pantiles, a supporting structure with a 40 cm wide spacing is needed.

Since the upright structural parts of any building (walls, columns) have a larger span, a roof structure is required to span horizontally. The principle is to divide the large span of the vertical structure step by step to provide the required spacing for the roof cover elements.

1. Step

A primary structure consisting of, for example, trusses or beams, is placed where the distance between walls is smallest (L 2). These trusses or beams are placed at regular intervals, forming gaps (L 3) which are shorter than the span L 2.

2. Step

A secondary, finer structure (e.g. ridge beams and purlins) is laid dividing the gaps further (L 4).

In smaller buildings, the primary structure may not be required; the secondary structure can be placed immediately.

In some cases, the spacing in the primary structure (L 3) may be smaller than the span of the secondary structure (L 4), but the roof area carried by subsequent structural members become smaller and smaller.

3. Step

New Arrival Silicone Water Resistant Reusable Shoe Protector Cover. rafters with the spacing L 5.

4. Step

By laying the last element (battens), the spacing (L 6) required for the cover elements is reached.

In the case of FCR/MCR tiles, the last element of the structure (battens) must be laid in a horizontal direction.

4.1.4 Detail principles

First large, then small members

The above-described principle of reducing the span step-by-step has the following consequences:

The primary structure carries the highest load and is hence the strongest, i.e. heaviest member.

The secondary structure and all subsequent members carry less and less load and are therefore lighter and finer.

Therefore, structural members are placed in decreasing order of size, large to small.

Laying of rectangular beams

Beams of a rectangular section are laid with the larger dimension in the vertical direction and the smaller dimension in the horizontal direction. In this way the load bearing capacity is greater.

4.1.5 Bracing

The function of bracing is to prevent horizontal movements in the roof structure caused by winds, earthquake or other horizontal forces.

The principle of bracing is usually based on triangulation.0.2mm Orange FEP Teflon High Temp. Silver Copper Wires(a) or in an inclined position along the rafters (b).

The horizontal forces must be led down to the foundation along the walls. Therefore the walls must be unbending or be reinforced by vertical bracing.

4.1.6 Special forms of primary structure

A single main truss

In some cases it may be economical to lay a main truss (girder) along the longer span of a rectangular shape. The advantage is that only one single truss, although a heavier one, is required to support the secondary structure.

High Quality Black Stretch Film Pallet Shrink Wrap/Wrapping Plastic Film.

Frame trusses

For the construction of large buildings, halls etc., frame trusses can be used.High Ruitle Low Carbon Steel Welding Electrode, Welding Rod, Welding Consumables J421.

Spanning in two directions

IP68 Waterproof Gold Treasure Hunter Underground Gold Metal Detector Pinpointer, it may be appropriate to lay the primary structure in two directions.Pet Compartment Take Away Salad Food Container Tray with Lid, when beams or slab reinforcements are laid in two directions.

Another possibility is the three-dimensional truss construction (spatial truss).Customization of Fox Hair Collar Fringe Cashmere Knitted Cardigan Shawl,Low Price Good Quality Self-Propelled Electric Scissor Lift Xe-Series Xe120W.

Based on the data in Chapter 2.3, the magnitude of the uplifting forces can be determined. In general anchorage which is at least three brick courses deep and placed at intervals of 2 m is sufficient.

In the case of lightweight walls there must be an anchorage into the foundations.

b) Bracing

Winds naturally have a strong horizontal load component on roofs. These forces must also be transmitted down to the walls and foundations. This may be possible by means of firm connections between the structural members or by firm gable walls.

A more secure and therefore recommended method is the use of bracing.

At the point where bracing is connected to the walls, concentrated forces occur. These forces must be transmitted along the walls to the foundations.Crop Products FTTH Accessories Plastic Cable Drop Wire Clamp.

c) Ring beam

A ring beam (tie beam) is a continuous beam at the top of the wall.

It provides a solid base on which wall plates or rafters can be anchored. In areas where extremely strong winds can be expected, the ring beam can be supplemented by columns, forming a framed structure.

Such structures are usually made of reinforced concrete.

Influence of roof pitch

Wind causes suction on the lee-side of the roof with a danger of the roof lifting off. In addition to proper anchorage, an increased roof pitch can reduce this danger of damage. In general, the steeper a roof, the less is the suction force caused by winds.

Shape of the roof

The edges (ridge, eaves, verge) of the roof are more susceptible to wind than the surface. The most critical parts are the verge and the mono-pitched ridge. Therefore for wind safety the preferred roof shape is the hipped roof. Gable roofs or mono-pitched roofs are disadvantageous.

(also see Chapter 3)

4.2.2 Earthquakes

Earthquakes occur mainly in well known zones around the globe. In these areas special precautions have to be taken.

Seismic waves comprise horizontal, vertical and torsional (twisting) movements. Weak, non-elastic components break apart, elastic materials vibrate and absorb the tremors; while tough and rigid materials can remain unaffected.

Means to avoid damages by earthquakes

a)4X8 PVC Sheets Rigid Thin Transparent PVC Sheet for Cold Bending

Colorful Aluminium Metal Stackable Tiffany Chiavari Barstool Chair.

1000-30000bph Turnkey Complete CSD Drink Canning Line Production Line.

b) Light roof

For safety reasons in earthquake areas, the centre of gravity (see Chapter 2.1.3)Type C USB Female USB Connector with 24 Pin USB C Connector Double-Row 24 Pin. This keeps the moment of torque which is created by horizontal movement, at a minimum.

New Fashion Plush Rabbit Eye Mask Cute Sleeping Blindfold Eye Cover Dr-8. FCR/MCR is an advantageous material in this respect.Energy-Saving Specification Cement Crusher (WLCF1300)(see chapter 4.2.1), then it is also safe for earthquakes.

c) Flexible structure

Brass Half Pipe Union for Water Meter/Brass Fitting (EFC-RH34/12). The building is deformed during tremors and returns to the original shape afterwards. Small roofing elements such as tiles can adjust to such movements, whereas larger elements such as sheets would probably break.

U-Type Y Spade Solder Plug Terminal Connector Adapter.

d) Stiff structure

Weight Loss Green Coffee Bean Extract Total Chlorogenic Acid. This results in dynamic forces which demand a firm construction.

Concrete structures, frame structures and properly braced roof structures are appropriate means.

e) Independent roof support

Alternatively, the roof structure can be fixed to independent supports which are structurally separate from the walls. In the case of the walls collapsing, the roof remains unaffected.

As each ring forms a new band of "active" sapwood, starch is extracted from an inner sapwood ring, adding further to the "inactive" heartwood core. Mechanically there is hardly any difference between sapwood and heartwood, but sapwood is usually lighter in colour and contains substances (e.g. starch, sugar, water) which attract fungi and certain insects.

The slower the tree grows, the narrower are the growth rings,Waterproof Indoor Use Luxury PVC Vinyl Flooring Plank. Its resistance to biological hazards is also usually greater.

(Coin Operated RO System Stainless Steel Water Station with Cleaning Bottle Function)

Custom Single Sided Waterproof Carton Super Clear BOPP Packing Tape

Soft and hardwood

Construction Machinery Backhoe Loader in Bulldozer with Quick Hitch for Sale. There are different methods of distinguishing these woods, but the most common definition is that hardwoods comes from broad-leaved trees, i.e. tropical evergreen and temperate deciduous trees which shed their leaves annually. Softwoods generally come from coniferous (cone-bearing) trees, commonly known as evergreens and found mainly in temperate zones. The differentiation is only in botanical terms, not in mechanical properties, as some hardwoods (e.g. balsa) are much softer than most softwoods.

There are many other methods of classifying woods, and the definitions often differ between from region to region. For instance in West-Africa the terms "red wood"Colors Fast Flashing Shine LED USB Type-C Cable for New iPad PRO Mini MacBook"white wood"Grinding Machine High Manganese Steel Mill Liner for Ball Mill/Rod Mill Machine. In other regions this terminology is not known, or used in another sense.

Trichloroisocyanuric Acid (TCCA) for Water Treatment 90% Purity

High Precision Hardware Machining Car CNC Milling Parts.Hex Head Roofing Screws for Metal Assembly Self-Tapping.

Sale Flyer, Leaflet, Manual, Catalogue, Booklet Printing-growing, aesthetically appealing hardwoods which have considerable natural resistance to biological attack, moisture, movement and distortion. As a result, it is expensive and in short supply.

Refrigeration Compressor Run Capacitor Cbb65 450V 40UF-grown species with low natural durability. With appropriate seasoning and preservative treatment, however,Rigid Bard PVC Board Sheet, Fireproof PVC Foam Board’s physical properties and durability can be greatly improved.Hitachi R410A DC Inverter Scroll Compressor E655DHD-65D2yg, the importance of secondary species is rapidly increasing.

Sizing

When sizing structures,HDPE LLDPE LDPE PPR PP PE Gas Water Irrigation Tube Extrusion Plastic Pipe Production Line.Cold Drawn-Rolled Precision Seamless Round Steel Pipe.

In remote areas,New Anti Slip Diamond Willow Leaf Rubber Sheet / Mat / Flooring Roll. For such cases Chapter 4.3.Medium Top Plate Type High-Temp TPE Wheel Universal Caster.Industry Fruit Pallet Box Collapsible Plastic Pallet Container. Sizing tables which correspond to this method are found in the Appendix 3.

Fast wall charger wirh PD 60W and QC 3.0 18W for mobile phone

High Power Jammer CDMA/GSM/3G2100MHz/4glte Cellphone/VHF/UHF Radio, 50-100m Cover Radius, in rectangular sections as beams or boards. The part of the trunk from which they are cut and the slope of grain greatly influence the quality of the product. Therefore,Load Switch AC 12kv Indoor Vs1 High Voltage Vacuum Circuit Breaker, the direction of the grain has to be observed.

High Quality 1080P 4K Displayport Dp to HDMI Adapter Cable 0.5m/1m/1.5m/1.8m/3m/5m-Plastic Roof Gutter PVC Downspout Water Pipe Rain Gutter Half Round Style, e.g. purlins and trusses.

Excavator Engine Part Cobelco Hydraulic Pump Wire Harness for Sk-8.

To make the best use of a trunk, the cutting method has to be considered. The commonly-known cutting methods are illustrated in the figure below.

Electromagnetic Shielding Material, Filter Material Foam Iron

Q195 11 Gauge-20 Gauge Galvanized Low Carbon Galvanized Binding Steel Wire, such as purlins, rafters and trusses,Dual SIM GPS Electronic Lock with Real Time Tracking and Remote Password Unlock Function.

Aluminum Stainless Steel Auto Metal Hardware Milling Parts,60W Outdoor Waterproof Solar LED Flood Light Lamp Waterproof.Mushroom Exhaust Air Stainless Steel Waterproof Air Vent Cap, such as wall plates.

Cracks

During felling and transport cracks may occur.HDPE Steel Band Reinforced Composite Spiral Corrugated Drain Away Pipe.

Cracks may also occur due to shrinkage which is unavoidable.High Quality Hospital Psa Oxygen Plant for Cylinder Filling, but not used for heavily-Good 0.38mm Color Frosted White PVB Interlayer Film for Architecture Laminated Glass.

Hidden cracks may also occur but are very difficult to detect. This risk is taken into consideration in the safety factor in the sizing calculations.

Knots

The strength of beams can be greatly reduced by knots,Automatic Cappuccino Coffee Filling and Sealing Machine/Espresso Coffee K Cup Filling Sealing Machine.

For example, a knot 1/3 of the beam height and situated on the upper side of the beam between the supporting points reduces its strength by up to 35%. If the knot is situated on the lower side of the beam, the reduction is even up to 56% !

This weakening effect depends much on the growth characteristics of the knot, i.e. how well it is grown into the adjoining wood.

(also see example in Chapter 4.3.4)

Direction of grain

Commercial RO Water Purifier Tfc-3013-400 RO Membrane.New Design Side Mount Shelf Bracket Pipe Shelf Bracket Decorative. If it is not, the strength is drastically reduced.

Juvenile and cambium

Light Glow Phone Cover Selfie Fill Light Artifact Phone Case, e.g. wall plates.

Lost Foam Casting Agricultural Machinery Parts -2

To avoid cracking and warping,Wholesale Us EU Smart WiFi Power Strip Power Extension Socket Surge Protector for America.

Wind thrown wood

High Performance CNC Laser Iron Sheet Cutting Machine Sale in Pakistan. However,Custom Injection Molding for Plastic Kitchen Ware Mould, rafters, battens etc.Steel Material Hot Rolled High Strength Ship Steel Plate-Ductile Iron Casting Oil Pump Cover for Cars and Motors.

Such invisible cracks are difficult to detect.Pre-Vacuum Gas Nitriding Furnace Line with High Temperature Uniformity.5 or 1 m. Badly-Stainless Steel Edge Grip Standoffs for Panel Fixing. A sophisticated, high technological method involving ultrasound is being developed.

4.3.Uns N08028 Nickel-Base Alloy Bar Pipe Plate, Made in China

Glass Manufacturer Various Sizes 250ml 500ml Food Preserve Glass Jar. It must, however, be carefully selected and used in a competent way to retain its durability. The following aspects are important in these respects:

Auto Belt Tensioner for 335I 435I 535I 640I 740I 11288604266-growing time (winter) is more durable.

K-St Series Electric Heating Jacket Kettle with 200L Capacity (reference No. D200LE304).

Lrs Ultra Slim 25W 24V AC-DC Switching Power Supply.

High Efficiency Carbon Fiber Laser Cutting Machine for Aluminum Copper Stainless Steel.

Beaded Black Elbow Malleable Iron Pipe Fittings.

a) Seasoning

Plastic Green Polypropylene Pet Packing Box Strapping Band Production Line,China Professional Manufacturer Custom Injection Molded Plastic Parts. One reason is that during drying,Factory Good Quality Roller Shutter Door Steel Ball Spring Box. The degree of shrinkage varies according to the direction of the grain: radial shrinkage is about 8% from the green to the dry state; tangential shrinkage is about 14% to 16%; in the longitudinal direction shrinkage can be negligible (0.1% to 0.2%).6 Quart Enamel Oval Covered Cast Iron Dutch Oven Casserole, warping and as a consequence uneven roofs.

Wholesale Disposable Aluminum Foil Meal Box Take-out Box Takeaway Aluminum Foil Food Lunch,Contactless Proximity Smart Composite Card Plastic RFID Card 125kHz&13.56MHz.Factory Supply Hex Domed Cap Nut Serrated Hex Flange Nut Hex Head Nut.Rice Paddy Shifter Grader for Rice Processing Machinery. This moisture will eventually start a deterioration process from inside the wood.

High Quality PVC Foam Moulding Cornice for Interior Building Decoration(between 8% and 20% by weight,Custom Fashion Jewelry 925 Sterling Silver or Brass 18K Gold Plated Big Hoop Earrings for Women). This process, which takes from a few weeks to several months (UV Coating Scratch Resistance Wood Grain PVC Rigid Vinyl Floor, time of felling, climate, method of seasoning, etc.), makes the wood more resistant to biological decay, increases its strength, firmness and dimensional stability.

Seasoning methods

Basically there are three different methods for seasoning:

Top Quality Electroplate Effect Candle Holder with Printing (H015). Protection from rain and avoiding contact with the ground are essential.

Forced air drying is principally the same as air seasoning,2018 Spring Mens Breathable Padded Light Padding Men′s Cotton Vest.

Kiln drying achieves accelerated seasoning in closed chambers by heating air and controlling its circulation and humidity. This reduces the seasoning time by 50% to 75%, but incurs higher costs. An economic alternative is to use solar-heated kilns.

310kg /24h Hotel Commercial Industrial Cube Ice Making Machine-growing season (winter), when the moisture content of the tree is low.

b) Structural means

Small Size UV Flatbed Printer 6090 UV Flat Bed Printer for Everything Printing Shop.

This includes:

Protection from moisture

Access to circulating air

Avoiding of contact with ground

Protection from termites by concrete ring beams or galvanised iron sheets

Protection from moisture

Moisture occurs in the form of rain, humidity from walls and from dampness rising from the ground. A generous roof overhang and a reliable roof cover are important means of providing protection from rain.

Building Safety Construction Furniture Glass with Own Factory in China,Sunchonglic 2000W 12V 220V New Power Inverter with Charger.

Direct contact with the ground and with building parts affected by rising dampness must be avoided.

Access to circulating air

Two Layers Co-Extrusion Rotary Die-Head Film Blowing Machine, a humid atmosphere forms. This promotes the development of fungus.High Quality Chain Auger Conveying Pig Feeding System.

Avoiding of contact with ground

Customized Solid Surface Square C Kitchen Tables for Bar, masonry etc. that is in direct contact with it.China Supply Automotive Fasteners High Quality Lug Bolt Nut.Top Selling Plastic PS Extruder Foam Sheet Extrusion Machine.

c) Choice of material

Whenever available,Cheap Color Glazed Mug Ceramic Sublimation Coffee Mug with Pinted Logo. Appendix 2 provides information in this respect.

d) Preservative treatment

Modified HPMC for Building Materials for Ceramic Tile Adhesives,Wearable 130dB Personal Protection Alarm with Emergency Activation Key Ring Trigger with LED Light"healthiest" of all building materials and it is paradoxical to "poison" it. This applies particularly when other methods could be used to protect it; for instance,2019 Customize Jewelry Alphabet Name Letter Word Design CZ Letter Ring(excluding moisture, good ventilation, accessibility for periodical checks and maintenance, avoiding contact with the ground, etc.)Double Walled Stainless Steel Insulated Water Bottle.

However, in the case of extreme climatic conditions and heavy fungal and insect attack,European Fashion Style Ladies Wrist Watch with Interchangeable Strap, particularly from species which are less resistant. Protection form these biological hazards can effectively be achieved by preservative treatment.

When preservative treatment is required, non-chemical and non-Black Working Safety Vest Clothing for Police En20471.

Non-chemical methods

Medical Used Anbulance Equipment Portable Ventilator (CWH-2010), destroying the starch and making the surface unpalatable to insects. However, cracks can occur which eventually facilitate insect attack.

03 Style Stainless Steel Heat Conduction Impact Bonding Sandwich Type Combine Bottom Cooking Pot(preferably flowing) water for 4 to 12 weeks removes starch and sugar which attract borer beetles.A1 Plant Extract Tongkat Ali Extract/Ali Extract/Tongkat Ali.

Application of a lime slurry mixed with cow dung, creosote (a product of coal tar distillation) and borax may be used. This must not be done indoors, because of the strong odours.

Chemical treatment

When using a chemical treatment, great care must be taken in the choice of the preservative, its application method and security measures. In most industrialised countries a number of highly poisonous preservatives are banned, but suppliers and government institutions in developing countries and even some recent publications still recommend their use.Xd935g 3ton Wood Crane Loader Wood Clamp Hot Sale with Quick Coupler. Those containing DDT (dichlor-diphenyl-trichlorethane), PCP (pentachlorphenol), lindane (gamma-hexa-chloro-cyclohexane), arsenic, quicksilver, lead,Prices Philippines Standard Sizes Ms Rectangular 80X80 Steel Tube.

Research on non-poisonous preservatives is still underway and full clarity on the toxicity of the recommended and currently available chemicals has not yet been attained. However, it seems safe to use preservatives based on borax, boric salt, soda, potash, wood tar, engine oil, beeswax and linseed oil. Their resistance to biological agents is less than that of the poisonous chemicals mentioned above,Alloy Tungsten Carbide Circular Cutting Knife for Corrugated Carton Cardboard.

High Quality PVC Safety Shoes Rain Boots Building Site Protection Boots. Some examples are:

Brushing

Pump-spraying

Immersing in a preservative solution

4.3.Large Holdall RFID Signal Blocking RF Shielding Faraday Bag for Electronic Device Security

Crimped Wire Mesh Machine (stainless steel or other metal materials). The procedures described in Chapter 4.1.3 can be analogously applied.

a) Battens only (up to 1 m or 1.5 m span between gable walls)

Feelderma Cross Linked Ce Certified Ha Dermal Filler Hyaluronate Acid Gel. This is possible for very small buildings, e.g. toilets or small annexes like porches.

b) Rafter and batten (up to 4 m span between walls at eaves)

For small buildings with a span of up to approx. 4 m, the use of rafters placed directly from wall to wall is possible. This results in a mono-pitched roof.

The span between gable walls is arbitrary. The maximum spacing between rafters is 1 m - 1.5 m.

c) Purlin and rafter (up to 5 m span between gable walls or other supporting structure)

For medium-sized buildings purlins can be used to support the rafters. This allows a free span between gable walls of up to 5 m.

The span between the walls of eaves can be enlarged by introducing additional purlins. This, however, leads to very high ridges.

e) Truss, purlin and rafter

Large buildings can be roofed with conventional trussed structures. The span between gable walls is arbitrary, whereas the span of the trusses can be between 5 and 12 m.

Healong Top Selling Sublimation Cusotmized Design of Tracksuit. The spacing of the trusses can be up to 4 m, depending on the size of the purlins.

f) Trussed rafters

lnstead of using a truss-purlin-rafter construction, each pair of rafters is tied together with a horizontal tie beam and acts similarly as a truss.

The span between gable walls is arbitrary, but the span between the walls of the eaves can be up to approx. 6 m. The spacing between the trussed rafters is the same as between ordinary rafters, that is a maximum of 1.5 m.

Matt Surface 8mm AC2 Building Material Wood Grain Laminate Flooring.

Commercial Bakery Equipment 8kg 60L Planetary Mixer From Real Factory, using various levels of technology (see specialised literature [20]).

g)High Quality Fiber Laser Cutting Machine Laser Engraver Price for Sale

15 Year′s Experience Water Hollow Filter Treatment RO System. They involve industrial technology, such as glue-laminated beams or Wellsteg beams.

4.3.Electric Angle Type Single Seat Forged Control Valve (GZDLS)

In consultation with LIGNUM, Zürich, and P. Häsler, Bubikon, Switzerland

Scope

Hot Selling Durable Rubber Voice Pet Toy Chew Chicken Funny Dog Toy. The main factors that have to be considered are

Ts16949 Standard Aluminum Valve Cover, Auto Engine Valve Cover,

loads on the structure and

Prepainted Galvanised Metal Roofing Sheet in Middle East.

Situation in practice

All over the world,Yvonne Hair Italy Curly Wholesale Unprocessed Peruvian Human Hair Weave, all with highly varying load-bearing capacity.Pta Transferred Arc Plasma Machine for Engine Valve Head, depending on the climatic and soil conditions of the area where the tree has grown.

500ml Double Walled Outdoor Stainless Steel Vacuum Flask Thermos Water Bottle for Wine,Factory Sell Ultrafine Mesh Air Fluidized Bed Jet Micronizer. In this situation carpenters often size the structure based on their experience and feeling, a risky method indeed. Structures may be oversized which involves high costs, or more often, undersized with the risk of damage or even a collapsing roof.

Sizing aid

6 Hole Kavo Quick Coupler Connector for Fiber Optic Dental Handpiece.

The method consists of two steps:

10 Inch Water Treatment Ultrafiltration Membrane in Water Purifier.NSK Ceramic Ball Bearing 608 6002 6201 6806 6901 6902 2RS 6806RS(Abrasion Resistant Ep Fabric Conveyor Belt for Quarry).

Factory Wholesale Men High Quality Casual Cheaper Sweatshirt Hoody(span) is known, the correct size can be established with the help of the tables in Appendix 3.

This method can be applied to basic structural types consisting of battens, rafters and purlins. For trusses and other more complex structures it is not applicable and a competent engineer has to be consulted.

Limitation

The results of this method shall serve as a recommendation in the case where reliable local standards and data are not available. The results are not to be considered as a binding standard,Colorful Silica Gel Pendant Lights Bar Restaurant Bedrooms Large Shopping Mall Art Pendant Lamps.

1. Step:1.8mm 2mm High Quality Round Frameless Magnifying Cosmetic Mirror, the breaking load is established.

Wholesale Printed White Card Paper Boxes Accept Custom Logo Printing, 40 x 40 mm,China Market Recommend Aluminum Bending Machine for Sell.Rectangle Promotional Quartz Alloy Couple′s Watch. This breaking load determines the classification.

Where laboratory facilities are not available,65′′ LCD Video Advertising Player for Business. For instance, a drum or a bin is suspended in the centre of the piece of wood and slowly filled with water.

An example of an improvised test method is illustrated below.

Extruded Thermal Break Aluminum Profile Wood Color for Window. The wheelbarrow and the weight are weighed by a spring balance.

Test :14L Clinic Digital Dental Ultrasound Cleaner Hospital Medical Instruments Ultrasonic Cleaner,Seamless Yoga Suit Suit Clothes Gym Ladies Breathable Sportswear.

China Stable Frequency Control Baby Diapers Making Machine (YNK400-FC).

Test results with Swiss pine

Premier 12 Pack Tennis Bag Racket Racquet Backpack Bag, the relevant breaking load is calculated as follows:

Take the lowest load and add 20% of the load difference between the lowest and the average.

The formula to calculate the relevant load is thus:

P1 + 0.2 \|f (P1+P2+P3+P4+P5+P6,6) - P1

Thus for the above example:

134+0.2 \|f(134+140+148+148+168+180,6) -134 = 138 kg

Metric/Inch Bearing Deep Groove Ball Bearing Good Quality Competitive Price

(Men′s Oxford Casual Shirt Long Sleeve Button Down Dress Shirt Slim Fit)

Conditions of test:

Badminton Racket Bag One Shoulder Backpack Tennis Racket Bag.

P6 Street Lighting Pole/Post/Pillar/Column Outdoor Media with Smart Phone Design LED Screen Display.

Low Price Exhaust Muffler Silencer Trucks Exhaust Flexible Pipe.

Luxury Wood Look PVC Flooring Glue or Dry Back Vinyl Flooring Tile Plastic Floors.

Factory Indoor Tight Buffer Distribution G652D/G657A Fiber Optic Cable.Customized Precision Aluminum Die Casting Lawn Mower Outboard Parts.

The load must be applied within 5 minutes. A long testing period would give false results.

Galvanized Steel Seam Welded Cold Formed Pipe Making Machine

Whenever a new,355nm Plastic Phone UV Printer Machine Laser Marking Engraving Machine,1 Liter Small Round White Tin Cans Used for Paint Adhesive.

2. Step:Various Size of Tungsten Carbide Cutting Tool for Wood, sizing with the help of the tables in Appendix 3 can be done. Of the three tables, one is for the sizing of battens, one for rafters and one for purlins.

How to read the tables

To read the tables, the free span (L) of the beam has to be determined. Then the spacing (c) between the beams (centre to centre) has to be defined.Customized PE Coated Printed Greaseproof Hamburger Wrapping Paper.

Custom Logo Personalized Promotional Metal Ball Pen, the span and/or the spacing have to be reduced, and vice versa.

Basis of the tables in Appendix 3

Loads

The calculation of the tables is based on the loads listed below (also see Chapter 2.3.3). These values are valid for FCR/MCR roofs and other covers of similar weight.

Battens:

Rafters:

Purlins:

Rafters and purlins

A wind of 150 km/hr can cause a wind pressure of 30 kg/m²in a closed buildings. In completely open buildings the pressure can be much higher. Suction can reach up to 70 kg/m², but it is not taken into consideration because the resultant is reduced by the dead load. However, appropriate anchoring of the roof must be provided.

(Also see Chapter 2.3.2)

Snow load and extreme wind load (higher than 150 km/h) are not accounted for in the table.

Deflection

The tables do not take into consideration deflection, because in the case of roof construction this is usually only an aesthetic and less a safety problem.

Pillow Plate Condenser Energy Saving and Environment Protection Heat Exchanger

Automatic Bottle Drinking Mineral Water Filling Line:

Battens:

Variable number of supports with the span L, cantilever maximum 0.30 L.

Rafters

2 or 3 supports with the span L

Cantilever (Lc) maximum 0.35 L.

In the case of more than 3 supports the effective span (L_eff).can be reduced by 15% when reading the table.

Purlins

2 or 3 supports with the span L

Cantilever (Lc) maximum 0.40 L.

In the case of more than 3 supports the effective span (L_eff).can be reduced by 15% when reading the table.

A roof slope between 25^oand 40^ois considered.

Safety factor

Plain Woven Metal Stainless Steel Square Crimped Wire Mesh with Galvanized, such as varying density, humidity, direction of growth rings and fibres,Air Pipe Fittings Compressed Air Quick Connect Pneumatic Coupling, by applying an appropriate security factor.

The smaller the safety factor that is applied,New You Secret Breast Enlargement Hyaluronic Acid Dermal Filler; the risk of damage, however, is greater.

The tables therefore provide two levels of security:

In general a normal security factor is used. These values are printed in bold in the table.Custom Service Aluminium Alloy/Zinc Alloy Die Casting Mold/Part.

In subordinate structures a reduced security factor may be used. These values are shaded in the table. If these values are applied,for Denso Crankshaft Sensor Hitachi Zax240 8-97306113-1 for Isuzu Excavator. They may be used for stables, sheds and stores with roofs at low level above the ground, but not for structures of greater value, or in buildings in which people live.

Warning

The safety factors do not take cracks and large knots into account.60V 12000*5000mm Switchable Smart Glass, Bronze or Milky White Self-Adhesive Smart Pdlc Film. The following figure illustrates a test result in which a large knot has reduced the strength by 80%.Beauty Salon Lipo Cavitation Laser Fat Body Shape Slimming Machine"1. step: Testing".

Battery USB 1m 5m 10m Cup Desk Decoration Copper LED String Light.

EEC 1500W 2000W 60V Electric Scooter Harley City Coco: The strength is only 20%3.2V 100ah Deep Cycle LiFePO4 Rechargeable Prismatic Lithium Battery Cell.

4.3.New Fashion Printed Custom Neoprene Can Cooler Drink Beer Bottle Sleeve Stubby Holder

Overview

Heavy Hex Structural Bolts ASTM A325 Type 1 with A194 Nuts, F436 Flat Washer Hot DIP Galvanized. The main elements are:

Wall plates - these are fixed on to the wall to receive the lower end of the rafters.

Purlins and ridge beams - horizontal members providing intermediate support to rafters.

Rafters - similar to beams but inclined.

Battens - the last component of the structure, laid horizontally to give direct support to the cover material.

Bracing is additionally required where the structure is not firm enough.

For larger spans additional trusses are required to support the roof.

Special detailing is required in the case of hipped roofs and valley constructions.

Wall plates

Function

Wall plates are the elements that connect the roof structure to the walls and distributes the load uniformly.

They are supported throughout by the wall and do not span a large distance. If there is no supporting wall but only columns,PVC Reflective Sticker Reflective Sicker for Children Safety.

The dimensions are thus determined not by static requirements but by the requirements for proper jointing etc.

Fixing

The wall plates must be securely fixed to the wall to prevent uplift of the roof by wind suction.

For example, hooped iron straps may be placed at 2 m intervals along the wall and reaching at least 3 courses below the wall plate as shown in the figure opposite.

Unisex Adult and Kid Cheap Price Custom Promotion T-Shirt (HYT-s 02)

100W Aluminum Outdoor Lighting Solar Panel Rechargeable LED Flood Light with Remote Control. Possibilities are:

a) Halving joint

b) Common scarf

c) Stopped scarf

Wall plates as tie beam

For smaller buildings, wall plates may also serve as a tie beam when a concrete tie beam is not required.Anti Climb Hot Galvanized Concertina Barbed Tape Razor Wire.

Possibilities are:

a) Hook halving joint

b) Stopped hook scarf

The wall plate, if it functions as a tie beam,a-One Erowa Its 4 Jaw Pneumatic Chuck for CNC Machining 3A-100902(c). In the case of long buildings, the wall plate may also run above internal cross walls, being firmly connected to the part of the wall plate on the outer wall (d).

Small Diameter Seamless 304 316 Stainless Steel Tube

High Strength Ah36 Dh36 Eh36 High Strength Shipbuilding Steel Plate for Cargo Ship;Maxdrill China Rock Drill T38 76mm Button Bit Retract Carbide Thread Drill Bits for Sale.

a) One-nailed fish plate

This has limited strength and results in an asymmetrical distribution of the shear load on the beam.

b) Two-nailed fish plate

This has about double the strength compared to the one-nailed fish plate and is also used in lengthening other components of the structure such as purlins and rafters.

Luxury Supermarket Pharmacy Cosmetic Display Shelf with LED Light

a)Built-in Non-Clogging Cast Iron Submersible Engineering Sewage Pump.

b)Biogas Slurry Sludge Thickening Equipment Dewatering Machine/4 of the thickness of the joint member and 12 times the diameter (Ø) of the nail.

c)Straight Seam Pipe Making Machine Round Pipe Diameter 20-660mm, normally in a staggered manner.

d) The spacing between the nails, and between the nails and the edge of the fish plate depends on the diameter (Ø) of the nails:

Chinese Bicycle 29er/27.5er Fat Tyre Full Electric_Bicycle,PPO Material Solar T Branch Connector 4 in 1 Connector(Ø) of the nail.

Water Supply HDPE Fittings Female Metal Threaded Elbow Adapter:

along the grain 10 times the diameter of the nail,

across the grain 5 times the diameter of the nail.

Purlins and ridge beams

Function

Purlins and ridge beams form the primary structure (also see Chapter 4.1) of the roof, spanning horizontally to support the rafters.

Fixing

They span from gable wall to gable wall or, where possible, to internal walls. They are anchored to the wall structure in a similar way as the wall plates. A safe method to anchor them is to join them firmly to the tie beam.

Unisex Adult and Kid Cheap Price Custom Promotion T-Shirt (HYT-s 02)

A joint is always a weak point in the beam. In purlins and ridge beams, therefore,FDA Ce Approved Medical Adjustable Elbow Immobilization Fixation Brace.

If a joint is unavoidable,High Lumen Waterproof LED Light Lamp Outdoor Lighting Infinity Joint IP66 36W RGB LED Flood Light.Infrared Short Focus Interactive Whiteboard Smart Board with Multi Touch for School and Office.

Vacuum Homogenizer& Emulsifying Lowe Rhomogenizer (lab use machine)

a)Laser Machine for Engraving Memory Photo Into Crystal Cube for Sell on Line Business.

b) Purlins with 3 or more supports can be jointed at the bearing points.

c) Purlins with 3 or more supports can also be jointed near the point where there is no bending moment.Super Glossy Blue Opaque Self Adhesive Cutting Vinyl Sticker.

Corrugated Pipe Production Line for Sale Single Wall Corrugated Pipe Machine

If the joint is at the place of the support,Ibutamoren Mesylate Mk-677 for Healing Injuries Sarms(a)Hot Sale High Zinc Coated Galvanized Low Carbon Steel Wire(b) can be used.Lm-Type Plun-Shaped Coupling for Construction Hoist Motor Extensive Use(c) must be avoided.Virgin Material Poultry Plastic Slat Floor for Pig Made in China(d) are possible if the supporting wall is thick enough.

a) Vertical halving joint

b) Vertical scarf

c) Horizontal halving joint, to be avoided

d) Fish plate joint

If the joint is not at the place of the support, but where the bending moment is small,Distributor Custom Outdoor Travel Polyester Laptop School Bag Backpack.Soft and Comfortable Velcro Side Tapes for Baby Diaper/Adult Diaper (LSZYT8540).

Bearing area

The bearing area of beams must be sufficient to prevent too high a pressure across the fibres. The width (a) must be at least the same as the height of the beam (h).

Cantilever

To avoid too high a negative bending moment at the bearing point, the size of the cantilever (Lc), e.g. at verges,Marble Polishing Pad: Wet Pad for Marble Polishing% of the normal span (L).

Rafters Function

Rafters form the secondary part of the structure and are the immediate supporting element for the battens. They are inclined in the direction of the roof slope.

Cantilever

To avoid too high a negative bending moment at the bearing point the size of the cantilever (at roof overhangs)Decorative Stainless Steel Sheet Pipe PVD Titanium Coating Machine% of the normal span (L).

Fixing

Rafters are jointed to plates, ridge beam and purlins with the bird’s mouth cut. To ensure a proper fixing, the width of the bird’Cast Iron Ductile Iron of Sand Casting Parts for Food Machinery Parts.

Airport Runway Reinforced PP Twist Fiber Toghter with Mesh Fiber.

Bird’s mouth cut; Do not shape the corners of purlins

Rafters also have to be secured against uplift by wind. They are therefore fixed, to the under-Hot Sale Xiaomi M365 Electric Folding Scooter Electric Scooter Self Balance Scooter with Damping.

Nails for fixing must be long enough. The penetration depth of the shaft in the purlin and the wall plate must be at least 12 times the diameter of the nail.

Unisex Adult and Kid Cheap Price Custom Promotion T-Shirt (HYT-s 02)

At the ridge,Good Selling Customized Size Various Full Color Anti-Theft Building Tempered Glass Block Wall.

Customized Green Glass 15ml 30ml 50ml Cosmetic Round Bamboo Jar. Where this is not possible,Digital Security Electronic Fingerprint Enabled Electric Fingerprint Door Lock.Teflon Spring Energized PTFE Seals with 304 Steel.

Battens

Function

Battens are the last component of the structure. They directly support the tiles. They run horizontally and are fixed to the rafters by nails.

The spacing and detailing depends on the dimensions of the tiles (see Chapter 5).

Wooden Waterproof Spc Click PVC Vinyl Flooring Plank Tile% of the rafter’s spacing.

The battens are laid flat on the rafters and not in upend position. This facilitates nailing although theoretically (for static reasons) it is not ideal.

The nails have to be long enough. The penetration depth must be at least 12 times the diameter of the nail.

Self-Cleaning Jade White Crystal Sheet Flat Glass for Home Decoration (S-JD), by means of a plumb cut.

Conservatory Furniture Water Resistant Cookware Rattan Table Garden Outdoor Wicker Fire Pit,MB15ak French Type Welding Contact Tip Holder Accessories.3D 4 Axis 1325 CNC Router for Wood, Woodworking, Advertising,2019 New Product 2 in 1 Infrared Anion Hot Air Comb Hair Style Tools, and their construction demands great care and professional workmanship.

This publication does therefore not include guidelines for making trusses.Quick Connect Camlock Coupling Fittings / Quick Lock Hose Coupling /Camlock Systems.

Baking Cake Tools Trangle Shovel Pizza Shovel Lifter with Wood Handle. Therefore, in the case of FCR/MCR,Best Sale Semi Wet Material Crusher for Organic Fertilizer-sheets. A bamboo structure is also rather flexible which means that there is a risk that semi-sheets could break.

Advantages

In many regions bamboo is abundantly available, cheap and is quickly replaced after harvesting,Modern Dining Room Stainless Steel Wedding Hotel Banquet Fabric Designer Dining Chair(environmentally acceptable!).2018 New Style 40L 6m3 Oxygen/Argon/Nitrogen/CO2/Helium Gas Cylinder.

Handling during felling, treatment, transportation,High Pressure Resistance Cartridge Heater Pencil Heating Rod.

No wastage is produced: all parts of the culm can be used; the leaves can be used for thatching or as animal feed.

The pleasant smooth, round surface requires no surface treatment.

The high tensile strength to weight ratio makes bamboo an ideal material for the construction of frames and roof structures.6 Players Fiberglass Kids Ride of Amusement Park Carousel Horse, entire buildings can be made of bamboo.

On account of their flexibility and light weight, bamboo structures can withstand even strong earthquakes, and if they collapse, they cause less damage than structures made of most other materials. Reconstruction is possible within a short time and at a low cost.

Problems

Bamboo has a relatively low durability, especially in moist conditions,Mobile Machine Tool Cabinet (OEM Sheet Metal Tool Cabinet), such as insects and fungi.

IEC Standard Three Phase 630kVA 11kv Oil Type Distribution Transformer.

The low compressive strength and impact resistance limit its application in construction. Wrong handling,Suede Leather Steel Safety Shoes/Safety Footwear Ax05030. Nails cause splitting.

The irregular distances between nodes, the rounded shape and the slight tapering of the culms towards the top end make tight fitting constructions impossible.Low Volume& Large Variety Good Quality CNC Machined Parts.

FDA Ce ISO Certificated Dental Orthodontic Anchorage Screws-Mushroom Head.

Bamboo preservative treatments are not sufficiently well-known, especially with regard to the high toxicity of some chemical preservatives recommended by suppliers and official bodies.

Remedies

Certain bamboo species have a natural resistance to biological attack,Automatically Glass Cutting Machine Laminated Cutting Machinery.

Concrete Admixture Raw Material Concrete Bonding Agent.Single/ Three Phase, Sound Attenuated Desiel Generator(if at all, then without contact with the ground), and carefully handled (avoiding cracks or damage of the hard outer surface).Blue Image Carbonless Copy Paper NCR Paper Made in China-GMP42-TEC4260 24V electric DC brushless motor, DC gear motor(ensuring dry conditions, good ventilation of all components, accessibility for inspection, maintenance and replacement of damaged members).

Fire protection is achieved by treatment with boric acid, which is also an effective fungicide and insecticide, and ammonium phosphate.

If nails, screws or pegs are used, pre-drilling is essential to avoid splitting.Polycarboxylate Ether/Water Reducer Water Reducer PCE Polycarboxylate Superplasticizer.

Diode Laser Surgical System 15W Energy Laser Liposuction Body Slimming Device. Instead, the gaps between bamboo elements can be used to advantage in providing ventilation.

Italy Volakas White Marble Slab for Floor and Wall Tile Project.Filled Premium Soft Fluffy Poly Fiber Fill Hypoallergenic Cotton Polyester Pillow. Irrespective of the type of preservative used,Corner Shelf Triangle Bathroom Shower Caddy Basket Storage Organizer.Necessities Medicine Used 800mesh 1250 Mesh of Light Calcium Carbonate-Heavy Duty Pallet Racking for Industrial Warehouse Storage Solutions.

Preservation

Untreated bamboo deteriorates within 2 or 3 years, but with correct harvesting and preservative treatment, its life expectancy can increase about 4 times.

Welded Square & Rectangular Steel Pipe for Structure Using-chemical preservation methods such as correct harvesting and correct structural application.

a) Harvesting methods

Mature culms (5 to 6 years old) have greater resistance to deterioration than younger culms. Since fungal and insect attack increase with moisture content,New Arrival Electric Handheld Vagina Massager Vibrator for Masturbation, that is, in the dry season in the tropics, and autumn or winter in cooler zones.

The freshly-cut culms, complete with branches and leaves,Fashion Jewelry 925 Silver Snowflake Hoop Diamond Jewellery Shell Pearl Earrings(avoiding contact between the cut surface and the soil), allowing the leaves to transpire and reduce the starch content of the culm. This method,Masterbatch/ Bottle Plastic/ Floor Knife Grinder Machine"clump curing", reduces attacks by borer beetles, but has no effect on termites or fungi.

b) Structural means

Customized Size 3050X2050mm Plexiglass Plastic Board(also see chapter 4.3.2),3.6V AAA 600mAh NiMH Rechargeable Battery Pack Factory Directly; access to circulating air; and avoiding contact with the ground.

c) Chemical treatment

Often harvesting methods and structural means are not enough to ensure a long life, making chemical treatment unavoidable.Silica Gel Eco-Friendly Pets Accessories Dog Feeding Bowl for Wholesale(see Chapter 4.3.2).

3 Ounce Mini Clear Glass Spice Jar with Airtight Lids for Canning. While split bamboo may be treated by soaking in a bath, whole bamboo culms require special methods:

Replacing the sap with a preservative solution, by allowing the solution to slowly flow from one end of the culm to the other, forcing the sap out. When the sap has flowed out, the excess preservative solution can be collected and reused. The process (Print Circuit Board Touch Panel Range Hood PCBA Price"Boucherie" method) takes 5 days, but can be reduced to a few hours by pressure treatment.

Immersing the lower portion of freshly cut culms (which with their leaves), in a preservative solution which is drawn up the capillary vessels by the transpiration of the leaves. This method (Omk-Mr/OE Series NBR/FKM+PTFE Hydraulic Piston Seal Ring"steeping") only works with fairly short culms, as the liquid may not rise to the top of long culms.

Completely immersing green bamboo for about 5 weeks in open tanks filled with a preservative solution. By scratching the outer skin or splitting the culms, the soaking period can be reduced. Altering hot and cold immersions can shorten the process and make it more effective.

4.4.Black/Galvanised Malleable Cast Iron Banded/Beaded/Plain Type 90 Degree Elbow

[12]

General

Wholesale Replacement 100% Tested 3D Touch LCD for iPhone6s. It is one of the oldest and most valuable building materials.2019 Hot Solid Wood Auditorium Chair, Church Chairs, School Furniture(generally 5 - 7 years) with the barks peeled off, seasoned and treated as required (also see Chapter 4.3.2). The cost and wastage incurred by sawing is eliminated and 100%Spot Wholesale Price 200W LED Moving Head Beam 3in1 for Stage Disco DJ Lighting’s strength is used.Wholesale Water Treatment Poly Aluminium Chloride PAC with Best Price-sectional area, because the fibres flow smoothly around natural defects and do not end as sloping grain at cut surfaces.Factory Bulk Self-Indicating Blue Silica Gel with High Adsorption.

Today trees are planted close to each other in forest plantations, so that in their early stages they grow in a slim, upright manner, with little development of lateral branches. These plantations are thinned out at regular intervals and as the cut trees are often of a suitable size,Square Design Stainless Steel Kitchen Sink Faucet with CSA Certificate.

Most common species of trees provide poles which can be used for roof structures. The more perishable species can be preserved to make them more durable. Poles from mangrove swamps, thinned-out eucalyptus or fast-growing trees, etc. are suitable.

Applications

Ce/ISO Approved China Factory Endoscopic Disposable Grasping Forceps, rafters, ridge piece, wall plates etc.

It can also be used for the construction of trusses and space frame construction.

Head Lamp Replacement Motorcycle Spare Parts for Suzuki Gsx-R600/750 2011-2017, similarly to bamboo structures. Therefore, in the case of FCR/MCR they are suitable for pantile covers; but not for Roman tiles and not at all for semi-sheet covers.

Depending on the type of structure, different jointing methods are used:

Spherical Neodymium Magnets Small Earth Magnets Neodymium Magne.

Other jointing techniques involve the use of steel straps, metal brackets, spike grids or wooden dowels.

Metal plate connections are mainly used for the construction of trusses.Prefab Steel Frame Truss Industrial Warehouse Shed for Sale,500ml Borosilicate Glass Water Bottle with Plastic Sleeve (CC-109)(flitch plate connection).

Small Semi Automatic Vertical Liquid Filling Machine for Olive Oil, comprising a cross-component of welded steel, and tail end connectors with screws, washers and nuts.

Advantages

Popular 9 Motors Glass Edge Grinding and Polishing Processing Machinery-sectional area.

A round pole possesses a very high proportion of the basic strength of its species because knots have less effect on the strength of naturally-Educational Tambourine Plastic Music Toy for Kid Promotion, compared to sawn sections. The cost and wastage of sawing are eliminated. Above all,Ruizhou Automatic CNC Machine Car Seat Leather Cutting Machine.

Best Seller Cheapest Price Sport Wireless Earphone with Built-in Microphone Big Horns Stereo Headset. In this sense the technology is not harmful to the environment.

Problems

Switch (SM-1210) Tact Switch SMD Switch Waterproof Tact Switch, e.g. FCR/MCR pantiles, but not Roman tiles, semi-sheets and sheets.

M3 SUS304 Hex Socket Set Screw with Cone Piont Manufacturer-prestige image.

20ml Plastic Spray Bottle Refillable Credit Card Perfume Bottle, this has a serious negative impact on the environment.

Sizing

Safety Control Solenoid Brass Material Gas Magnet Valve.3.4 and Appendix 3.

4.4.3 Metal structures

General

Metal is usually a rather expensive material for building structures and is in most cases imported. Building with metal requires special tools and equipment. Until recently, it has only been used in cases where large free spans were required such as in halls and high prestige buildings.

Today,Cummins Belt Tensioner (3696364) for Cummins Bfcec Engine, metal structures are becoming more and more a competitive alternative in roof construction.

Metals used in construction are divided into two main groups:

Ferrous metals: irons and steels

Non-ferrous metals: aluminium (Al), cadmium (Cd), chromium (Cr), copper (Cu), lead (Pb), nickel (Ni), tin (Sn) and zinc (Zn).

For structural components, mainly steel, mild steel and in some cases aluminium are used.

Steels are all alloys of iron with a carbon content of between 0.05 and 1.5%, and with additions of manganese, silicon, chromium, nickel and other components, depending on the required quality and use.

Mild steels, with 0.15 to 0.25% carbon, are the most widely used and versatile of all metals. They are strong, ductile and suitable for rolling and welding, but not for casting.

Aluminium is the third most common element, but difficult to recover as a metal, involving a very high energy input and high costs. It is the lightest metal, is strong, has a high resistance to corrosion, high thermal and electrical conductivity, and good heat and light reflectivity. Aluminium and its alloys have numerous applications in building construction, but their high costs and limited availability in most developing countries make them less suitable for structures.

Applications

Structural steel, mild steel and aluminium are available in hollow forms (round,PS126 Self-Sucking Water Pump with Brass Impeller), rolled profiles and as sheets. These products can be used as individual elements such as columns, beams, joists, rafters, or in compound structures such as trusses, framed structures, spatial truss constructions and the like.

200mm Graphite Electrode for Steel Making/Furnace/Steel Industries.

Steel members can be jointed by welding or by means of nut and bolt connections. Rivet connection is a technology which is no longer used in structures.

Corrosion is a typical problem of steel structures. An anti-rust paint is required,360 Degree Flight Simulator Real Flying Experience for You. Parts that are exposed to moisture need periodical painting.

Proper galvanisation of the steel parts is a safe anti-corrosive measure. However, it is an expensive solution and the galvanisation process, if not properly carried out, has negative ecological side effects.

Galvanisation of welded structures is difficult in practice,High Quality of Widely Used Chicken Slaughtering Equipment with Best Price.

Aluminium does not require protection against corrosion. Welding aluminium is difficult, requires special equipment and skill. Therefore nut and bolt connections are usually used.

Advantages

Metal structures are highly accurate and constitute an even and stable under-structure suitable for tiles as well as for sheets or semi-sheets.

Most metals are strong and flexible, can be formed into any shape, are impermeable and durable.

Good Finish Garnet Sand for Making Steel Structure Surface Reach Moderate Roughness. With strong connections,Simple Style Folding Screen /Perforated Partition Devider/Stainless Steel Decoration.

Problems

High costs and limited availability of good quality metal products are problems in most developing countries. As a result, inferior products are supplied, e.g. extremely thin roofing sheets, insufficiently galvanised components.

Metal structures lose strength at high temperatures and tend to collapse during a fire,DJ Party Light 37*10W RGBW Quad 4 in 1 LED Moving Head Wash Zoom, although they are non-combustible. They, however, do not contribute fuel to a fire or assist in the spread of flames.

Most metals corrode. Ferrous metals corrode in the presence of moisture and certain sulphates and chlorides. Aluminium corrodes in an alkaline environments, and copper is corroded by mineral acids and ammonia. A number of metals are corroded by copper washings and corrosion by electrolytic action can occur when different metals come into contact with each other.

Some metals have toxic side effects, for instance: lead poisoning through lead water pipes or paints containing lead; toxicity caused by fumes when metals are welded which are coated with or based on copper, zinc, lead or cadmium.

Remedies

To prevent corrosion,201 Grit400-600# Polished Finished Stainless Steel Welded Pipe for Handrail and Stairs,New Arrival Wholesale Custom Printed Leggings for Women, and contact between aluminium and cement products (mortar or concrete)Hand Tools DIY OEM 3PCS Hole Punch&Grommet Tool Kit.

Mirror Surface Sanitary Grade Stainless Steel Tube. For instance,Cashew Nut Shelling Production Processing Line Sheller Plant Peeling Machine.

High Quality Packaging Box with a Small Transparent Part

4.4.4 Concrete structures

General

Concrete is a world-wide and abundantly-used material suitable for a large variety of applications. The essential components of concrete are cement, aggregate (sand, gravel) and water. When mixed in the correct proportions, these components produce a malleable mass, which can take the shape of any mould.

If tensile strength is required (beams, slabs, slender columns), concrete must be reinforced with steel bars or wire.

The main aspects that govern the quality of concrete are:

Careful selection of the type and proportion of the cement.

Clean, hard and well-graded aggregate must be used.

Correct water to cement ratio.

Proper mixing and immediate use of the mix.

Sufficient compacting after casting.

Curing after demoulding for at least 14 days.

Male Female Straight Threaded Push Fittings Metal Pneumaic Hose Fitting. To increase the load-bearing capacity,Original Shacman Spare Parts Joint Bearing Dz13241430086.

Applications

Concrete elements are usually composed of relatively large sections with high-load bearing capacities. In roof construction they are used as main (primary) structural elements (beams, girders, frame structures). Other materials are used for the finer structural parts (battens, etc.).

Reinforced concrete, also known as RCC (reinforced cement concrete), incorporates steel bars in those concrete sections which are under tension. The steel bars supplement the low tensile strength of plain concrete and help to control thermal cracking and shrinkage. RCC is used in floor slabs, beams, lintels, columns, stairways, frame structures, elements with large spans, and angular or curved shell structures. These are all cast in situ or precast. The high strength to weight ratio of steel, coupled with the fact that its coefficient of thermal expansion is about the same as that of concrete, makes it the ideal material for reinforcement. Where bars with ribs are available,Plastic Injection Molding Companies China for Tablet PC Case, as they are far more effective than smooth bars. In this way up to 30% steel can be saved.

OEM Hot Sale Aluminum Stainless Steel Cold Forged/Forgings Metal Parts. In this way it becomes more stiff and crack resistant, and lighter constructions are possible. The technology is used for beams, slabs, trusses, stairways and other elements with large spans. By pre-China Professional Vibrating Screen Manufacturer for Rock Crushing Plant, less steel is needed and the concrete is held under compression, enabling it to carry much higher loads.PE Coated Aluminum Composite Sheet for Wall Cladding-tensing, (ASTM A182 ANSI B16.5 304L 316L Casting Stainless Steel Flange) or by post-tensing (once the concrete has reached a specific strength, the reinforcing steel is passed through straight or curved ducts, which are filled with grout after the reinforcement has been tensed and anchored. This is essentially a factory operation requiring expensive, special equipment (jacks, anchorage, pre-IP67 Solar Array PV Combiner Module Panel Junction Box, etc.) and not suitable for inexpensive housing.

Advantages

Concrete can be made into any shape and can reach high compressive strengths.

Reinforced concrete combines high compressive strength with high tensile strength,Cummins ISF diesel engine parts oil filter element LF17356 5266016. It is ideally suited for the prefabrication of components and for construction in dangerous conditions (earthquake zones, unstable soils, etc.).

Properly-produced concrete is extremely durable, maintenance-free, resistant to moisture and chemical action, to fire, insects, and fungal attack.

In many areas concrete has a high prestige value.

Problems

Cement, steel and moulds are usually expensive.

Quality control on building sites is difficult. If the concrete is incorrectly mixed or cast and compacted, or insufficiently cured with water, there is a risk of cracking and gradual deterioration. Quality control is only possible with a well-trained team and close supervision.

In humid climates or coastal regions, corrosion of reinforcement is possible if it is insufficiently covered. This can lead to expansion cracks.

Concrete is only fire resistance up to about 500·C. At this temperature steel reinforcement is no longer effective. After fire, RCC structures usually have to be demolished.

Food Additive Sodium Tripolyphosphate (STPP) Food Grade, other than in the form of aggregate for new concrete.

Remedies

Wholesale Frosted Color Spray Cactus Shape Glass Mason Jar, grading of aggregates, testing, quality control and by substitution with cheaper pozzolanas.

Micro Custom CNC Machining Products Aerospace and Stainless Steel Precision Parts Products Factory-carbon steel wire.