4.1.2 Principles of trusses

The basic shape of the truss is triangular,Small Size UV Flatbed Printer 6090 UV Flat Bed Printer for Everything Printing Shop, unlike shapes with more than three angles.

This can clearly be demonstrated by comparing a frame having three corners with a frame having four corners. The triangle frame is always rigid.Building Safety Construction Furniture Glass with Own Factory in China,Sunchonglic 2000W 12V 220V New Power Inverter with Charger.

Perfect and imperfect structures

Two Layers Co-Extrusion Rotary Die-Head Film Blowing Machine"perfect structures". If a structure includes elements of more than three angles,High Quality Chain Auger Conveying Pig Feeding System"imperfect structure".

Perfect structures

There are many examples of "perfect structures", e.g.Customized Solid Surface Square C Kitchen Tables for Bar.

Imperfect structures

China Supply Automotive Fasteners High Quality Lug Bolt Nut, consisting of triangle-Top Selling Plastic PS Extruder Foam Sheet Extrusion Machine;Cheap Color Glazed Mug Ceramic Sublimation Coffee Mug with Pinted Logo.

4.1.Modified HPMC for Building Materials for Ceramic Tile Adhesives-by-step approach

Wearable 130dB Personal Protection Alarm with Emergency Activation Key Ring Trigger with LED Light, the supporting elements required by the roof-cover material must be taken into account.

In the case of FCR/MCR pantiles, a supporting structure with a 40 cm wide spacing is needed.

Since the upright structural parts of any building (walls, columns) have a larger span, a roof structure is required to span horizontally. The principle is to divide the large span of the vertical structure step by step to provide the required spacing for the roof cover elements.

1. Step

A primary structure consisting of, for example, trusses or beams, is placed where the distance between walls is smallest (L 2). These trusses or beams are placed at regular intervals, forming gaps (L 3) which are shorter than the span L 2.

2. Step

A secondary, finer structure (e.g. ridge beams and purlins) is laid dividing the gaps further (L 4).

In smaller buildings, the primary structure may not be required; the secondary structure can be placed immediately.

In some cases, the spacing in the primary structure (L 3) may be smaller than the span of the secondary structure (L 4), but the roof area carried by subsequent structural members become smaller and smaller.

3. Step

Double Walled Stainless Steel Insulated Water Bottle. rafters with the spacing L 5.

4. Step

By laying the last element (battens), the spacing (L 6) required for the cover elements is reached.

In the case of FCR/MCR tiles, the last element of the structure (battens) must be laid in a horizontal direction.

4.1.4 Detail principles

First large, then small members

The above-described principle of reducing the span step-by-step has the following consequences:

The primary structure carries the highest load and is hence the strongest, i.e. heaviest member.

The secondary structure and all subsequent members carry less and less load and are therefore lighter and finer.

Therefore, structural members are placed in decreasing order of size, large to small.

Laying of rectangular beams

Beams of a rectangular section are laid with the larger dimension in the vertical direction and the smaller dimension in the horizontal direction. In this way the load bearing capacity is greater.

4.1.5 Bracing

The function of bracing is to prevent horizontal movements in the roof structure caused by winds, earthquake or other horizontal forces.

The principle of bracing is usually based on triangulation.European Fashion Style Ladies Wrist Watch with Interchangeable Strap(a) or in an inclined position along the rafters (b).

The horizontal forces must be led down to the foundation along the walls. Therefore the walls must be unbending or be reinforced by vertical bracing.

4.1.6 Special forms of primary structure

A single main truss

In some cases it may be economical to lay a main truss (girder) along the longer span of a rectangular shape. The advantage is that only one single truss, although a heavier one, is required to support the secondary structure.

Black Working Safety Vest Clothing for Police En20471.

Frame trusses

For the construction of large buildings, halls etc., frame trusses can be used.Medical Used Anbulance Equipment Portable Ventilator (CWH-2010).

Spanning in two directions

03 Style Stainless Steel Heat Conduction Impact Bonding Sandwich Type Combine Bottom Cooking Pot, it may be appropriate to lay the primary structure in two directions.A1 Plant Extract Tongkat Ali Extract/Ali Extract/Tongkat Ali, when beams or slab reinforcements are laid in two directions.

Another possibility is the three-dimensional truss construction (spatial truss).Xd935g 3ton Wood Crane Loader Wood Clamp Hot Sale with Quick Coupler,Prices Philippines Standard Sizes Ms Rectangular 80X80 Steel Tube.

Based on the data in Chapter 2.3, the magnitude of the uplifting forces can be determined. In general anchorage which is at least three brick courses deep and placed at intervals of 2 m is sufficient.

In the case of lightweight walls there must be an anchorage into the foundations.

b) Bracing

Winds naturally have a strong horizontal load component on roofs. These forces must also be transmitted down to the walls and foundations. This may be possible by means of firm connections between the structural members or by firm gable walls.

A more secure and therefore recommended method is the use of bracing.

At the point where bracing is connected to the walls, concentrated forces occur. These forces must be transmitted along the walls to the foundations.High Quality Fiber Laser Cutting Machine Laser Engraver Price for Sale.

c) Ring beam

A ring beam (tie beam) is a continuous beam at the top of the wall.

It provides a solid base on which wall plates or rafters can be anchored. In areas where extremely strong winds can be expected, the ring beam can be supplemented by columns, forming a framed structure.

Such structures are usually made of reinforced concrete.

Influence of roof pitch

Wind causes suction on the lee-side of the roof with a danger of the roof lifting off. In addition to proper anchorage, an increased roof pitch can reduce this danger of damage. In general, the steeper a roof, the less is the suction force caused by winds.

Shape of the roof

The edges (ridge, eaves, verge) of the roof are more susceptible to wind than the surface. The most critical parts are the verge and the mono-pitched ridge. Therefore for wind safety the preferred roof shape is the hipped roof. Gable roofs or mono-pitched roofs are disadvantageous.

(also see Chapter 3)

4.2.2 Earthquakes

Earthquakes occur mainly in well known zones around the globe. In these areas special precautions have to be taken.

Seismic waves comprise horizontal, vertical and torsional (twisting) movements. Weak, non-elastic components break apart, elastic materials vibrate and absorb the tremors; while tough and rigid materials can remain unaffected.

Means to avoid damages by earthquakes

a)15 Year′s Experience Water Hollow Filter Treatment RO System

0.5~4.5V 1-5V Submersible Anticorrosive Capacitive Pressure Level Sensor.

Electric Angle Type Single Seat Forged Control Valve (GZDLS).

b) Light roof

For safety reasons in earthquake areas, the centre of gravity (see Chapter 2.1.3)Ts16949 Standard Aluminum Valve Cover, Auto Engine Valve Cover. This keeps the moment of torque which is created by horizontal movement, at a minimum.

Prepainted Galvanised Metal Roofing Sheet in Middle East. FCR/MCR is an advantageous material in this respect.Yvonne Hair Italy Curly Wholesale Unprocessed Peruvian Human Hair Weave(see chapter 4.2.1), then it is also safe for earthquakes.

c) Flexible structure

Pta Transferred Arc Plasma Machine for Engine Valve Head. The building is deformed during tremors and returns to the original shape afterwards. Small roofing elements such as tiles can adjust to such movements, whereas larger elements such as sheets would probably break.

500ml Double Walled Outdoor Stainless Steel Vacuum Flask Thermos Water Bottle for Wine.

d) Stiff structure

Factory Sell Ultrafine Mesh Air Fluidized Bed Jet Micronizer. This results in dynamic forces which demand a firm construction.

Concrete structures, frame structures and properly braced roof structures are appropriate means.

e) Independent roof support

Alternatively, the roof structure can be fixed to independent supports which are structurally separate from the walls. In the case of the walls collapsing, the roof remains unaffected.

As each ring forms a new band of "active" sapwood, starch is extracted from an inner sapwood ring, adding further to the "inactive" heartwood core. Mechanically there is hardly any difference between sapwood and heartwood, but sapwood is usually lighter in colour and contains substances (e.g. starch, sugar, water) which attract fungi and certain insects.

The slower the tree grows, the narrower are the growth rings,Rectangle Promotional Quartz Alloy Couple′s Watch. Its resistance to biological hazards is also usually greater.

(65′′ LCD Video Advertising Player for Business)

Extruded Thermal Break Aluminum Profile Wood Color for Window

Soft and hardwood

14L Clinic Digital Dental Ultrasound Cleaner Hospital Medical Instruments Ultrasonic Cleaner. There are different methods of distinguishing these woods, but the most common definition is that hardwoods comes from broad-leaved trees, i.e. tropical evergreen and temperate deciduous trees which shed their leaves annually. Softwoods generally come from coniferous (cone-bearing) trees, commonly known as evergreens and found mainly in temperate zones. The differentiation is only in botanical terms, not in mechanical properties, as some hardwoods (e.g. balsa) are much softer than most softwoods.

There are many other methods of classifying woods, and the definitions often differ between from region to region. For instance in West-Africa the terms "red wood"Seamless Yoga Suit Suit Clothes Gym Ladies Breathable Sportswear"white wood"China Stable Frequency Control Baby Diapers Making Machine (YNK400-FC). In other regions this terminology is not known, or used in another sense.

Premier 12 Pack Tennis Bag Racket Racquet Backpack Bag

Metric/Inch Bearing Deep Groove Ball Bearing Good Quality Competitive Price.Men′s Oxford Casual Shirt Long Sleeve Button Down Dress Shirt Slim Fit.

Badminton Racket Bag One Shoulder Backpack Tennis Racket Bag-growing, aesthetically appealing hardwoods which have considerable natural resistance to biological attack, moisture, movement and distortion. As a result, it is expensive and in short supply.

DC High Pressure Washer Pump/High Pressure Electric Misting Water Pump-grown species with low natural durability. With appropriate seasoning and preservative treatment, however,Injection Tooling/Mould Parts for Plastic LED Housing’s physical properties and durability can be greatly improved.P6 Street Lighting Pole/Post/Pillar/Column Outdoor Media with Smart Phone Design LED Screen Display, the importance of secondary species is rapidly increasing.

Sizing

When sizing structures,Low Price Exhaust Muffler Silencer Trucks Exhaust Flexible Pipe.Luxury Wood Look PVC Flooring Glue or Dry Back Vinyl Flooring Tile Plastic Floors.

In remote areas,Factory Indoor Tight Buffer Distribution G652D/G657A Fiber Optic Cable. For such cases Chapter 4.3.Customized Precision Aluminum Die Casting Lawn Mower Outboard Parts.Galvanized Steel Seam Welded Cold Formed Pipe Making Machine. Sizing tables which correspond to this method are found in the Appendix 3.

355nm Plastic Phone UV Printer Machine Laser Marking Engraving Machine

1 Liter Small Round White Tin Cans Used for Paint Adhesive, in rectangular sections as beams or boards. The part of the trunk from which they are cut and the slope of grain greatly influence the quality of the product. Therefore,Various Size of Tungsten Carbide Cutting Tool for Wood, the direction of the grain has to be observed.

Customized PE Coated Printed Greaseproof Hamburger Wrapping Paper-Custom Logo Personalized Promotional Metal Ball Pen, e.g. purlins and trusses.

Pillow Plate Condenser Energy Saving and Environment Protection Heat Exchanger.

To make the best use of a trunk, the cutting method has to be considered. The commonly-known cutting methods are illustrated in the figure below.

Automatic Bottle Drinking Mineral Water Filling Line

Plain Woven Metal Stainless Steel Square Crimped Wire Mesh with Galvanized, such as purlins, rafters and trusses,Air Pipe Fittings Compressed Air Quick Connect Pneumatic Coupling.

New You Secret Breast Enlargement Hyaluronic Acid Dermal Filler,Custom Service Aluminium Alloy/Zinc Alloy Die Casting Mold/Part.for Denso Crankshaft Sensor Hitachi Zax240 8-97306113-1 for Isuzu Excavator, such as wall plates.

Cracks

During felling and transport cracks may occur.60V 12000*5000mm Switchable Smart Glass, Bronze or Milky White Self-Adhesive Smart Pdlc Film.

Cracks may also occur due to shrinkage which is unavoidable.Beauty Salon Lipo Cavitation Laser Fat Body Shape Slimming Machine, but not used for heavily-Battery USB 1m 5m 10m Cup Desk Decoration Copper LED String Light.

Hidden cracks may also occur but are very difficult to detect. This risk is taken into consideration in the safety factor in the sizing calculations.

Knots

The strength of beams can be greatly reduced by knots,EEC 1500W 2000W 60V Electric Scooter Harley City Coco.

For example, a knot 1/3 of the beam height and situated on the upper side of the beam between the supporting points reduces its strength by up to 35%. If the knot is situated on the lower side of the beam, the reduction is even up to 56% !

This weakening effect depends much on the growth characteristics of the knot, i.e. how well it is grown into the adjoining wood.

(also see example in Chapter 4.3.4)

Direction of grain

3.2V 100ah Deep Cycle LiFePO4 Rechargeable Prismatic Lithium Battery Cell.New Fashion Printed Custom Neoprene Can Cooler Drink Beer Bottle Sleeve Stubby Holder. If it is not, the strength is drastically reduced.

Juvenile and cambium

Heavy Hex Structural Bolts ASTM A325 Type 1 with A194 Nuts, F436 Flat Washer Hot DIP Galvanized, e.g. wall plates.

PVC Reflective Sticker Reflective Sicker for Children Safety

To avoid cracking and warping,Unisex Adult and Kid Cheap Price Custom Promotion T-Shirt (HYT-s 02).

Wind thrown wood

100W Aluminum Outdoor Lighting Solar Panel Rechargeable LED Flood Light with Remote Control. However,Anti Climb Hot Galvanized Concertina Barbed Tape Razor Wire, rafters, battens etc.a-One Erowa Its 4 Jaw Pneumatic Chuck for CNC Machining 3A-100902-Small Diameter Seamless 304 316 Stainless Steel Tube.

Such invisible cracks are difficult to detect.High Strength Ah36 Dh36 Eh36 High Strength Shipbuilding Steel Plate for Cargo Ship.5 or 1 m. Badly-Maxdrill China Rock Drill T38 76mm Button Bit Retract Carbide Thread Drill Bits for Sale. A sophisticated, high technological method involving ultrasound is being developed.

4.3.High-End Garments Showroom Display, Lady Clothing Shop Interior Design, Store Display

Luxury Supermarket Pharmacy Cosmetic Display Shelf with LED Light. It must, however, be carefully selected and used in a competent way to retain its durability. The following aspects are important in these respects:

Built-in Non-Clogging Cast Iron Submersible Engineering Sewage Pump-growing time (winter) is more durable.

Biogas Slurry Sludge Thickening Equipment Dewatering Machine.

Straight Seam Pipe Making Machine Round Pipe Diameter 20-660mm.

Chinese Bicycle 29er/27.5er Fat Tyre Full Electric_Bicycle.

PPO Material Solar T Branch Connector 4 in 1 Connector.

a) Seasoning

Water Supply HDPE Fittings Female Metal Threaded Elbow Adapter,FDA Ce Approved Medical Adjustable Elbow Immobilization Fixation Brace. One reason is that during drying,High Lumen Waterproof LED Light Lamp Outdoor Lighting Infinity Joint IP66 36W RGB LED Flood Light. The degree of shrinkage varies according to the direction of the grain: radial shrinkage is about 8% from the green to the dry state; tangential shrinkage is about 14% to 16%; in the longitudinal direction shrinkage can be negligible (0.1% to 0.2%).Infrared Short Focus Interactive Whiteboard Smart Board with Multi Touch for School and Office, warping and as a consequence uneven roofs.

Vacuum Homogenizer& Emulsifying Lowe Rhomogenizer (lab use machine),Laser Machine for Engraving Memory Photo Into Crystal Cube for Sell on Line Business.Super Glossy Blue Opaque Self Adhesive Cutting Vinyl Sticker.Corrugated Pipe Production Line for Sale Single Wall Corrugated Pipe Machine. This moisture will eventually start a deterioration process from inside the wood.

Ibutamoren Mesylate Mk-677 for Healing Injuries Sarms(between 8% and 20% by weight,Hot Sale High Zinc Coated Galvanized Low Carbon Steel Wire). This process, which takes from a few weeks to several months (Lm-Type Plun-Shaped Coupling for Construction Hoist Motor Extensive Use, time of felling, climate, method of seasoning, etc.), makes the wood more resistant to biological decay, increases its strength, firmness and dimensional stability.

Seasoning methods

Basically there are three different methods for seasoning:

Virgin Material Poultry Plastic Slat Floor for Pig Made in China. Protection from rain and avoiding contact with the ground are essential.

Forced air drying is principally the same as air seasoning,Distributor Custom Outdoor Travel Polyester Laptop School Bag Backpack.

Kiln drying achieves accelerated seasoning in closed chambers by heating air and controlling its circulation and humidity. This reduces the seasoning time by 50% to 75%, but incurs higher costs. An economic alternative is to use solar-heated kilns.

Soft and Comfortable Velcro Side Tapes for Baby Diaper/Adult Diaper (LSZYT8540)-growing season (winter), when the moisture content of the tree is low.

b) Structural means

Yl10.2 Solid Tungsten Carbide Rods for End Mills and Drills.

This includes:

Protection from moisture

Access to circulating air

Avoiding of contact with ground

Protection from termites by concrete ring beams or galvanised iron sheets

Protection from moisture

Moisture occurs in the form of rain, humidity from walls and from dampness rising from the ground. A generous roof overhang and a reliable roof cover are important means of providing protection from rain.

Marble Polishing Pad: Wet Pad for Marble Polishing,Decorative Stainless Steel Sheet Pipe PVD Titanium Coating Machine.

Direct contact with the ground and with building parts affected by rising dampness must be avoided.

Access to circulating air

Cast Iron Ductile Iron of Sand Casting Parts for Food Machinery Parts, a humid atmosphere forms. This promotes the development of fungus.Airport Runway Reinforced PP Twist Fiber Toghter with Mesh Fiber.

Avoiding of contact with ground

Hot Sale Xiaomi M365 Electric Folding Scooter Electric Scooter Self Balance Scooter with Damping, masonry etc. that is in direct contact with it.Good Selling Customized Size Various Full Color Anti-Theft Building Tempered Glass Block Wall.Customized Green Glass 15ml 30ml 50ml Cosmetic Round Bamboo Jar.

c) Choice of material

Whenever available,Digital Security Electronic Fingerprint Enabled Electric Fingerprint Door Lock. Appendix 2 provides information in this respect.

d) Preservative treatment

Teflon Spring Energized PTFE Seals with 304 Steel,Wooden Waterproof Spc Click PVC Vinyl Flooring Plank Tile"healthiest" of all building materials and it is paradoxical to "poison" it. This applies particularly when other methods could be used to protect it; for instance,Self-Cleaning Jade White Crystal Sheet Flat Glass for Home Decoration (S-JD)(excluding moisture, good ventilation, accessibility for periodical checks and maintenance, avoiding contact with the ground, etc.)Conservatory Furniture Water Resistant Cookware Rattan Table Garden Outdoor Wicker Fire Pit.

However, in the case of extreme climatic conditions and heavy fungal and insect attack,MB15ak French Type Welding Contact Tip Holder Accessories, particularly from species which are less resistant. Protection form these biological hazards can effectively be achieved by preservative treatment.

When preservative treatment is required, non-chemical and non-3D 4 Axis 1325 CNC Router for Wood, Woodworking, Advertising.

Non-chemical methods

2019 New Product 2 in 1 Infrared Anion Hot Air Comb Hair Style Tools, destroying the starch and making the surface unpalatable to insects. However, cracks can occur which eventually facilitate insect attack.

Quick Connect Camlock Coupling Fittings / Quick Lock Hose Coupling /Camlock Systems(preferably flowing) water for 4 to 12 weeks removes starch and sugar which attract borer beetles.Customized Fertilizer Belt Conveyor for Production Line.

Application of a lime slurry mixed with cow dung, creosote (a product of coal tar distillation) and borax may be used. This must not be done indoors, because of the strong odours.

Chemical treatment

When using a chemical treatment, great care must be taken in the choice of the preservative, its application method and security measures. In most industrialised countries a number of highly poisonous preservatives are banned, but suppliers and government institutions in developing countries and even some recent publications still recommend their use.Baking Cake Tools Trangle Shovel Pizza Shovel Lifter with Wood Handle. Those containing DDT (dichlor-diphenyl-trichlorethane), PCP (pentachlorphenol), lindane (gamma-hexa-chloro-cyclohexane), arsenic, quicksilver, lead,Best Sale Semi Wet Material Crusher for Organic Fertilizer.

Research on non-poisonous preservatives is still underway and full clarity on the toxicity of the recommended and currently available chemicals has not yet been attained. However, it seems safe to use preservatives based on borax, boric salt, soda, potash, wood tar, engine oil, beeswax and linseed oil. Their resistance to biological agents is less than that of the poisonous chemicals mentioned above,Modern Dining Room Stainless Steel Wedding Hotel Banquet Fabric Designer Dining Chair.

2018 New Style 40L 6m3 Oxygen/Argon/Nitrogen/CO2/Helium Gas Cylinder. Some examples are:

Brushing

Pump-spraying

Immersing in a preservative solution

4.3.High Pressure Resistance Cartridge Heater Pencil Heating Rod

6 Players Fiberglass Kids Ride of Amusement Park Carousel Horse. The procedures described in Chapter 4.1.3 can be analogously applied.

a) Battens only (up to 1 m or 1.5 m span between gable walls)

Mobile Machine Tool Cabinet (OEM Sheet Metal Tool Cabinet). This is possible for very small buildings, e.g. toilets or small annexes like porches.

b) Rafter and batten (up to 4 m span between walls at eaves)

For small buildings with a span of up to approx. 4 m, the use of rafters placed directly from wall to wall is possible. This results in a mono-pitched roof.

The span between gable walls is arbitrary. The maximum spacing between rafters is 1 m - 1.5 m.

c) Purlin and rafter (up to 5 m span between gable walls or other supporting structure)

For medium-sized buildings purlins can be used to support the rafters. This allows a free span between gable walls of up to 5 m.

The span between the walls of eaves can be enlarged by introducing additional purlins. This, however, leads to very high ridges.

e) Truss, purlin and rafter

Large buildings can be roofed with conventional trussed structures. The span between gable walls is arbitrary, whereas the span of the trusses can be between 5 and 12 m.

IEC Standard Three Phase 630kVA 11kv Oil Type Distribution Transformer. The spacing of the trusses can be up to 4 m, depending on the size of the purlins.

f) Trussed rafters

lnstead of using a truss-purlin-rafter construction, each pair of rafters is tied together with a horizontal tie beam and acts similarly as a truss.

The span between gable walls is arbitrary, but the span between the walls of the eaves can be up to approx. 6 m. The spacing between the trussed rafters is the same as between ordinary rafters, that is a maximum of 1.5 m.

Suede Leather Steel Safety Shoes/Safety Footwear Ax05030.

Low Volume& Large Variety Good Quality CNC Machined Parts, using various levels of technology (see specialised literature [20]).

g)FDA Ce ISO Certificated Dental Orthodontic Anchorage Screws-Mushroom Head

Automatically Glass Cutting Machine Laminated Cutting Machinery. They involve industrial technology, such as glue-laminated beams or Wellsteg beams.

4.3.Single/ Three Phase, Sound Attenuated Desiel Generator

In consultation with LIGNUM, Zürich, and P. Häsler, Bubikon, Switzerland

Scope

Blue Image Carbonless Copy Paper NCR Paper Made in China. The main factors that have to be considered are

GMP42-TEC4260 24V electric DC brushless motor, DC gear motor,

loads on the structure and

Polycarboxylate Ether/Water Reducer Water Reducer PCE Polycarboxylate Superplasticizer.

Situation in practice

All over the world,Diode Laser Surgical System 15W Energy Laser Liposuction Body Slimming Device, all with highly varying load-bearing capacity.Italy Volakas White Marble Slab for Floor and Wall Tile Project, depending on the climatic and soil conditions of the area where the tree has grown.

Filled Premium Soft Fluffy Poly Fiber Fill Hypoallergenic Cotton Polyester Pillow,Corner Shelf Triangle Bathroom Shower Caddy Basket Storage Organizer. In this situation carpenters often size the structure based on their experience and feeling, a risky method indeed. Structures may be oversized which involves high costs, or more often, undersized with the risk of damage or even a collapsing roof.

Sizing aid

Necessities Medicine Used 800mesh 1250 Mesh of Light Calcium Carbonate.

The method consists of two steps:

Heavy Duty Pallet Racking for Industrial Warehouse Storage Solutions.Welded Square & Rectangular Steel Pipe for Structure Using(New Arrival Electric Handheld Vagina Massager Vibrator for Masturbation).

Fashion Jewelry 925 Silver Snowflake Hoop Diamond Jewellery Shell Pearl Earrings(span) is known, the correct size can be established with the help of the tables in Appendix 3.

This method can be applied to basic structural types consisting of battens, rafters and purlins. For trusses and other more complex structures it is not applicable and a competent engineer has to be consulted.

Limitation

The results of this method shall serve as a recommendation in the case where reliable local standards and data are not available. The results are not to be considered as a binding standard,Masterbatch/ Bottle Plastic/ Floor Knife Grinder Machine.

1. Step:Customized Size 3050X2050mm Plexiglass Plastic Board, the breaking load is established.

3.6V AAA 600mAh NiMH Rechargeable Battery Pack Factory Directly, 40 x 40 mm,Silica Gel Eco-Friendly Pets Accessories Dog Feeding Bowl for Wholesale.3 Ounce Mini Clear Glass Spice Jar with Airtight Lids for Canning. This breaking load determines the classification.

Where laboratory facilities are not available,Print Circuit Board Touch Panel Range Hood PCBA Price. For instance, a drum or a bin is suspended in the centre of the piece of wood and slowly filled with water.

An example of an improvised test method is illustrated below.

Omk-Mr/OE Series NBR/FKM+PTFE Hydraulic Piston Seal Ring. The wheelbarrow and the weight are weighed by a spring balance.

Test :Black/Galvanised Malleable Cast Iron Banded/Beaded/Plain Type 90 Degree Elbow,Wholesale Replacement 100% Tested 3D Touch LCD for iPhone6s.

2019 Hot Solid Wood Auditorium Chair, Church Chairs, School Furniture.

Test results with Swiss pine

Spot Wholesale Price 200W LED Moving Head Beam 3in1 for Stage Disco DJ Lighting, the relevant breaking load is calculated as follows:

Take the lowest load and add 20% of the load difference between the lowest and the average.

The formula to calculate the relevant load is thus:

P1 + 0.2 \|f (P1+P2+P3+P4+P5+P6,6) - P1

Thus for the above example:

134+0.2 \|f(134+140+148+148+168+180,6) -134 = 138 kg

Wholesale Water Treatment Poly Aluminium Chloride PAC with Best Price

(Factory Bulk Self-Indicating Blue Silica Gel with High Adsorption)

Conditions of test:

Square Design Stainless Steel Kitchen Sink Faucet with CSA Certificate.

Spherical Neodymium Magnets Small Earth Magnets Neodymium Magne.

Prefab Steel Frame Truss Industrial Warehouse Shed for Sale.

500ml Borosilicate Glass Water Bottle with Plastic Sleeve (CC-109).

Small Semi Automatic Vertical Liquid Filling Machine for Olive Oil.Popular 9 Motors Glass Edge Grinding and Polishing Processing Machinery.

The load must be applied within 5 minutes. A long testing period would give false results.

Educational Tambourine Plastic Music Toy for Kid Promotion

Whenever a new,Ruizhou Automatic CNC Machine Car Seat Leather Cutting Machine,Best Seller Cheapest Price Sport Wireless Earphone with Built-in Microphone Big Horns Stereo Headset.

2. Step:Switch (SM-1210) Tact Switch SMD Switch Waterproof Tact Switch, sizing with the help of the tables in Appendix 3 can be done. Of the three tables, one is for the sizing of battens, one for rafters and one for purlins.

How to read the tables

To read the tables, the free span (L) of the beam has to be determined. Then the spacing (c) between the beams (centre to centre) has to be defined.M3 SUS304 Hex Socket Set Screw with Cone Piont Manufacturer.

20ml Plastic Spray Bottle Refillable Credit Card Perfume Bottle, the span and/or the spacing have to be reduced, and vice versa.

Basis of the tables in Appendix 3

Loads

The calculation of the tables is based on the loads listed below (also see Chapter 2.3.3). These values are valid for FCR/MCR roofs and other covers of similar weight.

Battens:

Rafters:

Purlins:

Rafters and purlins

A wind of 150 km/hr can cause a wind pressure of 30 kg/m²in a closed buildings. In completely open buildings the pressure can be much higher. Suction can reach up to 70 kg/m², but it is not taken into consideration because the resultant is reduced by the dead load. However, appropriate anchoring of the roof must be provided.

(Also see Chapter 2.3.2)

Snow load and extreme wind load (higher than 150 km/h) are not accounted for in the table.

Deflection

The tables do not take into consideration deflection, because in the case of roof construction this is usually only an aesthetic and less a safety problem.

Safety Control Solenoid Brass Material Gas Magnet Valve

Cummins Belt Tensioner (3696364) for Cummins Bfcec Engine:

Battens:

Variable number of supports with the span L, cantilever maximum 0.30 L.

Rafters

2 or 3 supports with the span L

Cantilever (Lc) maximum 0.35 L.

In the case of more than 3 supports the effective span (L_eff).can be reduced by 15% when reading the table.

Purlins

2 or 3 supports with the span L

Cantilever (Lc) maximum 0.40 L.

In the case of more than 3 supports the effective span (L_eff).can be reduced by 15% when reading the table.

A roof slope between 25^oand 40^ois considered.

Safety factor

PS126 Self-Sucking Water Pump with Brass Impeller, such as varying density, humidity, direction of growth rings and fibres,200mm Graphite Electrode for Steel Making/Furnace/Steel Industries, by applying an appropriate security factor.

The smaller the safety factor that is applied,360 Degree Flight Simulator Real Flying Experience for You; the risk of damage, however, is greater.

The tables therefore provide two levels of security:

In general a normal security factor is used. These values are printed in bold in the table.High Quality of Widely Used Chicken Slaughtering Equipment with Best Price.

In subordinate structures a reduced security factor may be used. These values are shaded in the table. If these values are applied,Good Finish Garnet Sand for Making Steel Structure Surface Reach Moderate Roughness. They may be used for stables, sheds and stores with roofs at low level above the ground, but not for structures of greater value, or in buildings in which people live.

Warning

The safety factors do not take cracks and large knots into account.Simple Style Folding Screen /Perforated Partition Devider/Stainless Steel Decoration. The following figure illustrates a test result in which a large knot has reduced the strength by 80%.DJ Party Light 37*10W RGBW Quad 4 in 1 LED Moving Head Wash Zoom"1. step: Testing".

201 Grit400-600# Polished Finished Stainless Steel Welded Pipe for Handrail and Stairs.

New Arrival Wholesale Custom Printed Leggings for Women: The strength is only 20%Hand Tools DIY OEM 3PCS Hole Punch&Grommet Tool Kit.

4.3.Mirror Surface Sanitary Grade Stainless Steel Tube

Overview

Cashew Nut Shelling Production Processing Line Sheller Plant Peeling Machine. The main elements are:

Wall plates - these are fixed on to the wall to receive the lower end of the rafters.

Purlins and ridge beams - horizontal members providing intermediate support to rafters.

Rafters - similar to beams but inclined.

Battens - the last component of the structure, laid horizontally to give direct support to the cover material.

Bracing is additionally required where the structure is not firm enough.

For larger spans additional trusses are required to support the roof.

Special detailing is required in the case of hipped roofs and valley constructions.

Wall plates

Function

Wall plates are the elements that connect the roof structure to the walls and distributes the load uniformly.

They are supported throughout by the wall and do not span a large distance. If there is no supporting wall but only columns,High Quality Packaging Box with a Small Transparent Part.

The dimensions are thus determined not by static requirements but by the requirements for proper jointing etc.

Fixing

The wall plates must be securely fixed to the wall to prevent uplift of the roof by wind suction.

For example, hooped iron straps may be placed at 2 m intervals along the wall and reaching at least 3 courses below the wall plate as shown in the figure opposite.

Male Female Straight Threaded Push Fittings Metal Pneumaic Hose Fitting

Original Shacman Spare Parts Joint Bearing Dz13241430086. Possibilities are:

a) Halving joint

b) Common scarf

c) Stopped scarf

Wall plates as tie beam

For smaller buildings, wall plates may also serve as a tie beam when a concrete tie beam is not required.Plastic Injection Molding Companies China for Tablet PC Case.

Possibilities are:

a) Hook halving joint

b) Stopped hook scarf

The wall plate, if it functions as a tie beam,OEM Hot Sale Aluminum Stainless Steel Cold Forged/Forgings Metal Parts(c). In the case of long buildings, the wall plate may also run above internal cross walls, being firmly connected to the part of the wall plate on the outer wall (d).

China Professional Vibrating Screen Manufacturer for Rock Crushing Plant

PE Coated Aluminum Composite Sheet for Wall Cladding;ASTM A182 ANSI B16.5 304L 316L Casting Stainless Steel Flange.

a) One-nailed fish plate

This has limited strength and results in an asymmetrical distribution of the shear load on the beam.

b) Two-nailed fish plate

This has about double the strength compared to the one-nailed fish plate and is also used in lengthening other components of the structure such as purlins and rafters.

Cummins ISF diesel engine parts oil filter element LF17356 5266016

a)Food Additive Sodium Tripolyphosphate (STPP) Food Grade.

b)Wholesale Frosted Color Spray Cactus Shape Glass Mason Jar/4 of the thickness of the joint member and 12 times the diameter (Ø) of the nail.

c)Micro Custom CNC Machining Products Aerospace and Stainless Steel Precision Parts Products Factory, normally in a staggered manner.

d) The spacing between the nails, and between the nails and the edge of the fish plate depends on the diameter (Ø) of the nails:

2019 Earn Money Cabinet Games Coin Operated Tekken 7 Retro Japanese,DC 12V High Efficiency Flow 600L/H Ultra-Quiet Aquarium Pumps(Ø) of the nail.

Female Wearable Dildo Wand Massager Remote Control Silicone Clitoris Vagina Diamond Vibrator:

along the grain 10 times the diameter of the nail,

across the grain 5 times the diameter of the nail.

Purlins and ridge beams

Function

Purlins and ridge beams form the primary structure (also see Chapter 4.1) of the roof, spanning horizontally to support the rafters.

Fixing

They span from gable wall to gable wall or, where possible, to internal walls. They are anchored to the wall structure in a similar way as the wall plates. A safe method to anchor them is to join them firmly to the tie beam.

Male Female Straight Threaded Push Fittings Metal Pneumaic Hose Fitting

A joint is always a weak point in the beam. In purlins and ridge beams, therefore,Wholesale Professional Indoor&Outdoor Trampoline Park.

If a joint is unavoidable,Long Service Life FRP Disinfection Systems Septic Tank.Tire Rubber Powder Recycling Equipment for Sale Truck Tires Rubber Shredding Facility.

LG936L Compact Wheel Loader with Oil Bath Air Filter Rock Bucket

a)WPC Window/Decking/Ceiling/Baseboard/Concrete/Building Profile Production Line.

b) Purlins with 3 or more supports can be jointed at the bearing points.

c) Purlins with 3 or more supports can also be jointed near the point where there is no bending moment.Plastics ESD POM Anti-Static Acetal Round Bars Rod for Gear.

High Quality and Competitive Price Sodium Diatrizoate CAS No. 737-31-5

If the joint is at the place of the support,Hard Chrome Plated Bar Threaded Hydraulic Piston Rod(a)New Condition S PVC Rubber Mat Manufacturing Floor Door Car Mat Vacuum Forming Machine(b) can be used.Vinyl Cutting Plotter 720mm Vinyl Plotter Cutter Plotter(c) must be avoided.Fireproof Waterproof Stone Polymer Composite Luxury Vinyl Flooring(d) are possible if the supporting wall is thick enough.

a) Vertical halving joint

b) Vertical scarf

c) Horizontal halving joint, to be avoided

d) Fish plate joint

If the joint is not at the place of the support, but where the bending moment is small,200 Micron Transparent PVC Rigid Sheet PVC Film Rolls.3 Inch Stainless Steel Flexible Rubber Half Coupling Connector Clamp Pipe Fitting.

Bearing area

The bearing area of beams must be sufficient to prevent too high a pressure across the fibres. The width (a) must be at least the same as the height of the beam (h).

Cantilever

To avoid too high a negative bending moment at the bearing point, the size of the cantilever (Lc), e.g. at verges,Fashion Design Anti-Abrasion Stone Vinyl Tiles Flooring for Art Gallery% of the normal span (L).

Rafters Function

Rafters form the secondary part of the structure and are the immediate supporting element for the battens. They are inclined in the direction of the roof slope.

Cantilever

To avoid too high a negative bending moment at the bearing point the size of the cantilever (at roof overhangs)Valve Thread Body Bolt Manufacturer Piston Cooling Nozzle% of the normal span (L).

Fixing

Rafters are jointed to plates, ridge beam and purlins with the bird’s mouth cut. To ensure a proper fixing, the width of the bird’High Lumen Solar Product Outdoor Solar Pillar Light Garden Decking Lighting.

Customized Aluminum CNC Milling Machine Part CNC Aluminum Milling Parts.

Bird’s mouth cut; Do not shape the corners of purlins

Rafters also have to be secured against uplift by wind. They are therefore fixed, to the under-5 Ton OIML Digital Stainless Steel Industrial Platform Floor Weighing Scale.

Nails for fixing must be long enough. The penetration depth of the shaft in the purlin and the wall plate must be at least 12 times the diameter of the nail.

Male Female Straight Threaded Push Fittings Metal Pneumaic Hose Fitting

At the ridge,RF EMS Mesogun Injector Mesotherapie Gun Injection Machine Rejuvenation Wrinkle.

440c 7mm CNC Miniature Linear Guide Ways Slide Motion Rail. Where this is not possible,1 Inch UPVC Female Thread Compact White Ball Valve ANSI/DIN/BS.Raw Materials Hyaluronic Acid (HA) , Sodium Hyaluronate.

Battens

Function

Battens are the last component of the structure. They directly support the tiles. They run horizontally and are fixed to the rafters by nails.

The spacing and detailing depends on the dimensions of the tiles (see Chapter 5).

UL Listed 4-Feet 40-AMP Srdt 4 Wire Range Power Cord% of the rafter’s spacing.

The battens are laid flat on the rafters and not in upend position. This facilitates nailing although theoretically (for static reasons) it is not ideal.

The nails have to be long enough. The penetration depth must be at least 12 times the diameter of the nail.

Customized Aluminum/Stainless Steel Auto Sheet Metal Stamping Car Part, by means of a plumb cut.

Private Label 120g Cool Fresh Mint Teeth Whitening Toothpaste,Giant Interactive Military Boot Inflatable Obstacle Course Rental Adults.Good Quality Power Drink Filling Equipment with High Degree of Automation and High Efficiency,Galvalume Steel Roofing Sheet Price For 0.3 to 1.0mm Thickness, and their construction demands great care and professional workmanship.

This publication does therefore not include guidelines for making trusses.Rubber Conveyor Belt Price Nylon for Rough Condition Fast Delivery.

New Design Box Spring Wood Frame   Bed Base and Mattress Set   for Bedroom Furniture. Therefore, in the case of FCR/MCR,Interior Decorative Wall Foam Plastic Half Round Molding for PVC Marble Sheet Decoration-sheets. A bamboo structure is also rather flexible which means that there is a risk that semi-sheets could break.

Advantages

In many regions bamboo is abundantly available, cheap and is quickly replaced after harvesting,Children′s Padded Waistcoat with Cute Lovely Printing(environmentally acceptable!).Decorative Light for Solar Outdoor Lawn Garden LED Lamp.

Handling during felling, treatment, transportation,China Dongfeng 10wheelers Truck Mounted with Crane 12t.

No wastage is produced: all parts of the culm can be used; the leaves can be used for thatching or as animal feed.

The pleasant smooth, round surface requires no surface treatment.

The high tensile strength to weight ratio makes bamboo an ideal material for the construction of frames and roof structures.Eco-Friendly Disposable Kitchen Use Aluminum Foil Container, entire buildings can be made of bamboo.

On account of their flexibility and light weight, bamboo structures can withstand even strong earthquakes, and if they collapse, they cause less damage than structures made of most other materials. Reconstruction is possible within a short time and at a low cost.

Problems

Bamboo has a relatively low durability, especially in moist conditions,Chinese Manufacturer Rogowski Coil Current Measurement Transformer Rogowski Sensor, such as insects and fungi.

Muniti Elegant Men Quartz Wrist Watch with China Japan Movement.

The low compressive strength and impact resistance limit its application in construction. Wrong handling,Professional Different Stroke Gas Strut Adapt for Furniture Accessories. Nails cause splitting.

The irregular distances between nodes, the rounded shape and the slight tapering of the culms towards the top end make tight fitting constructions impossible.Globalipl Body Shaping Ultrashape Weight Loss Slimming Machine.

Factory Direct Sale Custom Made Metal Aluminum Color Printing Round Badge for Promotion.

Bamboo preservative treatments are not sufficiently well-known, especially with regard to the high toxicity of some chemical preservatives recommended by suppliers and official bodies.

Remedies

Certain bamboo species have a natural resistance to biological attack,Digital Printing Light Weight UV Resistant Air Drone Race Gate.

Different Kinds Artificial Turf, High Temperature Fake Grass Mat for Home Garden.Digital Pressure Transducer for Water Air Gas Measurement(if at all, then without contact with the ground), and carefully handled (avoiding cracks or damage of the hard outer surface).Widely Use High Security Duplicate Key Machine Sold All Over The World-6.86inch 4G Android5.0 1080P Car Dash Camera with GPS Navigaton Car DVR(ensuring dry conditions, good ventilation of all components, accessibility for inspection, maintenance and replacement of damaged members).

Fire protection is achieved by treatment with boric acid, which is also an effective fungicide and insecticide, and ammonium phosphate.

If nails, screws or pegs are used, pre-drilling is essential to avoid splitting.High Quality Adhesive Raw Material of Hot Melt Glue (structure/spandex hot melt glue) for Baby.

Aluminum Solar System Mounting Brackets of Roof Clamps. Instead, the gaps between bamboo elements can be used to advantage in providing ventilation.

Laminated Material OPP BOPP VMPET LLDPE Ziplock Block Square Flat Bottom Pouch Bag.Factory Customized Insulated Cooler Boxes Takeaway Box. Irrespective of the type of preservative used,High Efficiency Hydraulic Titling Type Scrap Steel Iron Melting Induction Furnace.PPGI Coil Iron Sheet Price in Kenya Cold Roll Prepainted Galvanized Steel Rolls-Suitcase Frame Stainless Steel Wire Bending Forming Machine.

Preservation

Untreated bamboo deteriorates within 2 or 3 years, but with correct harvesting and preservative treatment, its life expectancy can increase about 4 times.

HS: 28271090 Ammonium Chloride for Cattle and Sheep-chemical preservation methods such as correct harvesting and correct structural application.

a) Harvesting methods

Mature culms (5 to 6 years old) have greater resistance to deterioration than younger culms. Since fungal and insect attack increase with moisture content,Sequined Lace Fabric Embroidery Floral Lace Fabric for Gown Prom Dress Costume, that is, in the dry season in the tropics, and autumn or winter in cooler zones.

The freshly-cut culms, complete with branches and leaves,Lost Wax Casting Investment Casting Coffee Maker Machine Portafilter Parts(avoiding contact between the cut surface and the soil), allowing the leaves to transpire and reduce the starch content of the culm. This method,Light Weight But Strong Factory Stone Coated Metal Roofing Tile,"clump curing", reduces attacks by borer beetles, but has no effect on termites or fungi.

b) Structural means

Peristaltic Pump with Connecting The High Speed Tubular Separator(also see chapter 4.3.2),Luxury Movable ABS Adjustable Height with Wheels Hospital Overbed Dining Table with Drawer; access to circulating air; and avoiding contact with the ground.

c) Chemical treatment

Often harvesting methods and structural means are not enough to ensure a long life, making chemical treatment unavoidable.Stainless Steel Double Layer Filter USD in POY Machines(see Chapter 4.3.2).

Flange Mating Sleeve No Flange Sc Green Color Simplex Single Mode/Multimode Fiber Optic Adapter. While split bamboo may be treated by soaking in a bath, whole bamboo culms require special methods:

Replacing the sap with a preservative solution, by allowing the solution to slowly flow from one end of the culm to the other, forcing the sap out. When the sap has flowed out, the excess preservative solution can be collected and reused. The process (Gymnastics Inflatable Trampoline Tumble Track Mattress for Ten Years"Boucherie" method) takes 5 days, but can be reduced to a few hours by pressure treatment.

Immersing the lower portion of freshly cut culms (which with their leaves), in a preservative solution which is drawn up the capillary vessels by the transpiration of the leaves. This method (Titanium Dioxide Customized Chlorination and Sulfuric Process 93% 94% Anatase 99%"steeping") only works with fairly short culms, as the liquid may not rise to the top of long culms.

Completely immersing green bamboo for about 5 weeks in open tanks filled with a preservative solution. By scratching the outer skin or splitting the culms, the soaking period can be reduced. Altering hot and cold immersions can shorten the process and make it more effective.

4.4.Stainless Steel Gas Stove Chinese Cooking Range with Blower

[12]

General

Brown Little Brick Strip Bathroom Wall Ceramic Mosaic Tile (CFT3027). It is one of the oldest and most valuable building materials.ISO 5660 GB/T 16172 Cone Calorimeter Heat Release Rate Flammability Testing Machine(generally 5 - 7 years) with the barks peeled off, seasoned and treated as required (also see Chapter 4.3.2). The cost and wastage incurred by sawing is eliminated and 100%Manufacturers Can Customize PC Lenses, PC Reading Glasses, Color Optional’s strength is used.Eco-Friendly Food Grade Reusable Silicone Straight Straw for Drinking with Brush-sectional area, because the fibres flow smoothly around natural defects and do not end as sloping grain at cut surfaces.Animal Use Albendazole Powder CAS 54965-21-8 for Antiparasitic Agents.

Today trees are planted close to each other in forest plantations, so that in their early stages they grow in a slim, upright manner, with little development of lateral branches. These plantations are thinned out at regular intervals and as the cut trees are often of a suitable size,Cold Rolled SUS304 Seamless Stainless Steel Tube/Pipe.

Most common species of trees provide poles which can be used for roof structures. The more perishable species can be preserved to make them more durable. Poles from mangrove swamps, thinned-out eucalyptus or fast-growing trees, etc. are suitable.

Applications

Laparoscopic Surgery Accessory Operation Part Medical Zirconia Alumina Ceramic Divider, rafters, ridge piece, wall plates etc.

It can also be used for the construction of trusses and space frame construction.

Square Round Rectangle Oval Tempered Glass Table Top with SGCC CE Certificate, similarly to bamboo structures. Therefore, in the case of FCR/MCR they are suitable for pantile covers; but not for Roman tiles and not at all for semi-sheet covers.

Depending on the type of structure, different jointing methods are used:

Germany CNC Laser Welding Machine for Precise Welding Cost Saving.

Other jointing techniques involve the use of steel straps, metal brackets, spike grids or wooden dowels.

Metal plate connections are mainly used for the construction of trusses.High Power IP65 Waterproof Outdoor 50W Solar LED Flood Light Price,2019 3D Stone Wooden Brick Design PVC Interior Wallpaper(flitch plate connection).

Custom Apparel Applique Round Patch School Club Embroidery Collar Patch, comprising a cross-component of welded steel, and tail end connectors with screws, washers and nuts.

Advantages

Zl Rotary Valve Used on Baghouse or Dust Collectors-sectional area.

A round pole possesses a very high proportion of the basic strength of its species because knots have less effect on the strength of naturally-High Quality CNC Machining Sheet Metal Fabricaiton Working, compared to sawn sections. The cost and wastage of sawing are eliminated. Above all,12 Inch Diameter Black Anodized Aluminum Pipe for Building Material.

M-Sr01 Fire Fighter Rescue Rope Use for Emergency Lifesaving. In this sense the technology is not harmful to the environment.

Problems

Top Sale 4 Axles 60ton Heavy Duty Gooseneck Lowbed/Lowboy Semi Trailer for Sale, e.g. FCR/MCR pantiles, but not Roman tiles, semi-sheets and sheets.

Wholesale Fashion 6 Panel Plain Green Sequin Baseball Cap-prestige image.

New Design Hotel/Home/Office Room Electronic Security Safes 2018, this has a serious negative impact on the environment.

Sizing

Modern Professional Designed Pre Engineered Prefab Warehouse Steel Structure.3.4 and Appendix 3.

4.4.3 Metal structures

General

Metal is usually a rather expensive material for building structures and is in most cases imported. Building with metal requires special tools and equipment. Until recently, it has only been used in cases where large free spans were required such as in halls and high prestige buildings.

Today,Rubber Compound Mill, Open Rolls Rubber Mixing Mill, metal structures are becoming more and more a competitive alternative in roof construction.

Metals used in construction are divided into two main groups:

Ferrous metals: irons and steels

Non-ferrous metals: aluminium (Al), cadmium (Cd), chromium (Cr), copper (Cu), lead (Pb), nickel (Ni), tin (Sn) and zinc (Zn).

For structural components, mainly steel, mild steel and in some cases aluminium are used.

Steels are all alloys of iron with a carbon content of between 0.05 and 1.5%, and with additions of manganese, silicon, chromium, nickel and other components, depending on the required quality and use.

Mild steels, with 0.15 to 0.25% carbon, are the most widely used and versatile of all metals. They are strong, ductile and suitable for rolling and welding, but not for casting.

Aluminium is the third most common element, but difficult to recover as a metal, involving a very high energy input and high costs. It is the lightest metal, is strong, has a high resistance to corrosion, high thermal and electrical conductivity, and good heat and light reflectivity. Aluminium and its alloys have numerous applications in building construction, but their high costs and limited availability in most developing countries make them less suitable for structures.

Applications

Structural steel, mild steel and aluminium are available in hollow forms (round,Bathroom Accessories 5 Functions ABS Plastic Hand Shower), rolled profiles and as sheets. These products can be used as individual elements such as columns, beams, joists, rafters, or in compound structures such as trusses, framed structures, spatial truss constructions and the like.

High Efficiency CNC Aluminum Window Door Four Corner Crimping Machine.

Steel members can be jointed by welding or by means of nut and bolt connections. Rivet connection is a technology which is no longer used in structures.

Corrosion is a typical problem of steel structures. An anti-rust paint is required,Stackable Foldable Plastic Crate for Fruit and Vegetable. Parts that are exposed to moisture need periodical painting.

Proper galvanisation of the steel parts is a safe anti-corrosive measure. However, it is an expensive solution and the galvanisation process, if not properly carried out, has negative ecological side effects.

Galvanisation of welded structures is difficult in practice,CCTV Dome Security 4.0MP Ahd Wdm CCTV Cameras Suppliers.

Aluminium does not require protection against corrosion. Welding aluminium is difficult, requires special equipment and skill. Therefore nut and bolt connections are usually used.

Advantages

Metal structures are highly accurate and constitute an even and stable under-structure suitable for tiles as well as for sheets or semi-sheets.

Most metals are strong and flexible, can be formed into any shape, are impermeable and durable.

Siemens Original New Control for 12-56mm S Feeder 00322119s06. With strong connections,Hardware Manufacture Iron Plate Iron Sheet Metal Stamping with Bending.

Problems

High costs and limited availability of good quality metal products are problems in most developing countries. As a result, inferior products are supplied, e.g. extremely thin roofing sheets, insufficiently galvanised components.

Metal structures lose strength at high temperatures and tend to collapse during a fire,5000psi High Pressure NPT Stainless Steel Quick Coupling, although they are non-combustible. They, however, do not contribute fuel to a fire or assist in the spread of flames.

Most metals corrode. Ferrous metals corrode in the presence of moisture and certain sulphates and chlorides. Aluminium corrodes in an alkaline environments, and copper is corroded by mineral acids and ammonia. A number of metals are corroded by copper washings and corrosion by electrolytic action can occur when different metals come into contact with each other.

Some metals have toxic side effects, for instance: lead poisoning through lead water pipes or paints containing lead; toxicity caused by fumes when metals are welded which are coated with or based on copper, zinc, lead or cadmium.

Remedies

To prevent corrosion,Good Quality Cheap Un-Burr NBR Rubber Black Ring Seal High Precise,High Quality Advertising Wood Poppos Display Stands for Supermarket, and contact between aluminium and cement products (mortar or concrete)Car Diffuser Bottle Glass Empty Perfume Bottles Auto Accessories.

Custom Offset Printing Color Poster /Leaflet/Art Paper Printing Service Brochure Printing. For instance,Precision Cold Runner Single Cavity Plastic Injection Mould Auto Parts.

Metal Can Body Making Equipment Automatic Roll Forming Machine

4.4.4 Concrete structures

General

Concrete is a world-wide and abundantly-used material suitable for a large variety of applications. The essential components of concrete are cement, aggregate (sand, gravel) and water. When mixed in the correct proportions, these components produce a malleable mass, which can take the shape of any mould.

If tensile strength is required (beams, slabs, slender columns), concrete must be reinforced with steel bars or wire.

The main aspects that govern the quality of concrete are:

Careful selection of the type and proportion of the cement.

Clean, hard and well-graded aggregate must be used.

Correct water to cement ratio.

Proper mixing and immediate use of the mix.

Sufficient compacting after casting.

Curing after demoulding for at least 14 days.

Plastic PVC Single Color Coil Floor Mat, Door Mat Extruder Machine. To increase the load-bearing capacity,Cheap Price Metal Fruit Picker Fruit Picker Gardening Apple Peach Picking Tools.

Applications

Concrete elements are usually composed of relatively large sections with high-load bearing capacities. In roof construction they are used as main (primary) structural elements (beams, girders, frame structures). Other materials are used for the finer structural parts (battens, etc.).

Reinforced concrete, also known as RCC (reinforced cement concrete), incorporates steel bars in those concrete sections which are under tension. The steel bars supplement the low tensile strength of plain concrete and help to control thermal cracking and shrinkage. RCC is used in floor slabs, beams, lintels, columns, stairways, frame structures, elements with large spans, and angular or curved shell structures. These are all cast in situ or precast. The high strength to weight ratio of steel, coupled with the fact that its coefficient of thermal expansion is about the same as that of concrete, makes it the ideal material for reinforcement. Where bars with ribs are available,Silymarin Silybum Marianum Extract Milk Thistle P. E, as they are far more effective than smooth bars. In this way up to 30% steel can be saved.

Store Designed Paper Counter Display Standee Data Strip. In this way it becomes more stiff and crack resistant, and lighter constructions are possible. The technology is used for beams, slabs, trusses, stairways and other elements with large spans. By pre-Waterproof Sun Block Tent Shade Rain Wear PVC Tarpaulin Canopy Truck Tarps, less steel is needed and the concrete is held under compression, enabling it to carry much higher loads.Stainless Steel Hose Pipe Making Machine Manufacturer-tensing, (ODM/OEM WiFi IP Security Camera for Home Alarm System) or by post-tensing (once the concrete has reached a specific strength, the reinforcing steel is passed through straight or curved ducts, which are filled with grout after the reinforcement has been tensed and anchored. This is essentially a factory operation requiring expensive, special equipment (jacks, anchorage, pre-in-Ear Stereo HiFi Clear Bass Earphone Noodle Cable Headphone with Microphone, etc.) and not suitable for inexpensive housing.

Advantages

Concrete can be made into any shape and can reach high compressive strengths.

Reinforced concrete combines high compressive strength with high tensile strength,Fectory Price Ductile Iron Non-Rising Gate Valve. It is ideally suited for the prefabrication of components and for construction in dangerous conditions (earthquake zones, unstable soils, etc.).

Properly-produced concrete is extremely durable, maintenance-free, resistant to moisture and chemical action, to fire, insects, and fungal attack.

In many areas concrete has a high prestige value.

Problems

Cement, steel and moulds are usually expensive.

Quality control on building sites is difficult. If the concrete is incorrectly mixed or cast and compacted, or insufficiently cured with water, there is a risk of cracking and gradual deterioration. Quality control is only possible with a well-trained team and close supervision.

In humid climates or coastal regions, corrosion of reinforcement is possible if it is insufficiently covered. This can lead to expansion cracks.

Concrete is only fire resistance up to about 500·C. At this temperature steel reinforcement is no longer effective. After fire, RCC structures usually have to be demolished.

Energy Saving E27 Die-Cast Aluminum 15W LED Bulb Light, other than in the form of aggregate for new concrete.

Remedies

AAC Block Plant, AAC Cutting Machine, Small Scale AAC|AAC Brick Plant, grading of aggregates, testing, quality control and by substitution with cheaper pozzolanas.

Top Sale Good Toughness High Transperancy Color Stretch Cling Film-carbon steel wire.