4.1.2 Principles of trusses

The basic shape of the truss is triangular,Corner Shelf Triangle Bathroom Shower Caddy Basket Storage Organizer, unlike shapes with more than three angles.

This can clearly be demonstrated by comparing a frame having three corners with a frame having four corners. The triangle frame is always rigid.Necessities Medicine Used 800mesh 1250 Mesh of Light Calcium Carbonate,Heavy Duty Pallet Racking for Industrial Warehouse Storage Solutions.

Perfect and imperfect structures

Welded Square & Rectangular Steel Pipe for Structure Using"perfect structures". If a structure includes elements of more than three angles,New Arrival Electric Handheld Vagina Massager Vibrator for Masturbation"imperfect structure".

Perfect structures

There are many examples of "perfect structures", e.g.Fashion Jewelry 925 Silver Snowflake Hoop Diamond Jewellery Shell Pearl Earrings.

Imperfect structures

Masterbatch/ Bottle Plastic/ Floor Knife Grinder Machine, consisting of triangle-Customized Size 3050X2050mm Plexiglass Plastic Board;3.6V AAA 600mAh NiMH Rechargeable Battery Pack Factory Directly.

4.1.Silica Gel Eco-Friendly Pets Accessories Dog Feeding Bowl for Wholesale-by-step approach

3 Ounce Mini Clear Glass Spice Jar with Airtight Lids for Canning, the supporting elements required by the roof-cover material must be taken into account.

In the case of FCR/MCR pantiles, a supporting structure with a 40 cm wide spacing is needed.

Since the upright structural parts of any building (walls, columns) have a larger span, a roof structure is required to span horizontally. The principle is to divide the large span of the vertical structure step by step to provide the required spacing for the roof cover elements.

1. Step

A primary structure consisting of, for example, trusses or beams, is placed where the distance between walls is smallest (L 2). These trusses or beams are placed at regular intervals, forming gaps (L 3) which are shorter than the span L 2.

2. Step

A secondary, finer structure (e.g. ridge beams and purlins) is laid dividing the gaps further (L 4).

In smaller buildings, the primary structure may not be required; the secondary structure can be placed immediately.

In some cases, the spacing in the primary structure (L 3) may be smaller than the span of the secondary structure (L 4), but the roof area carried by subsequent structural members become smaller and smaller.

3. Step

Omk-Mr/OE Series NBR/FKM+PTFE Hydraulic Piston Seal Ring. rafters with the spacing L 5.

4. Step

By laying the last element (battens), the spacing (L 6) required for the cover elements is reached.

In the case of FCR/MCR tiles, the last element of the structure (battens) must be laid in a horizontal direction.

4.1.4 Detail principles

First large, then small members

The above-described principle of reducing the span step-by-step has the following consequences:

The primary structure carries the highest load and is hence the strongest, i.e. heaviest member.

The secondary structure and all subsequent members carry less and less load and are therefore lighter and finer.

Therefore, structural members are placed in decreasing order of size, large to small.

Laying of rectangular beams

Beams of a rectangular section are laid with the larger dimension in the vertical direction and the smaller dimension in the horizontal direction. In this way the load bearing capacity is greater.

4.1.5 Bracing

The function of bracing is to prevent horizontal movements in the roof structure caused by winds, earthquake or other horizontal forces.

The principle of bracing is usually based on triangulation.Black/Galvanised Malleable Cast Iron Banded/Beaded/Plain Type 90 Degree Elbow(a) or in an inclined position along the rafters (b).

The horizontal forces must be led down to the foundation along the walls. Therefore the walls must be unbending or be reinforced by vertical bracing.

4.1.6 Special forms of primary structure

A single main truss

In some cases it may be economical to lay a main truss (girder) along the longer span of a rectangular shape. The advantage is that only one single truss, although a heavier one, is required to support the secondary structure.

Wholesale Replacement 100% Tested 3D Touch LCD for iPhone6s.

Frame trusses

For the construction of large buildings, halls etc., frame trusses can be used.2019 Hot Solid Wood Auditorium Chair, Church Chairs, School Furniture.

Spanning in two directions

Spot Wholesale Price 200W LED Moving Head Beam 3in1 for Stage Disco DJ Lighting, it may be appropriate to lay the primary structure in two directions.Wholesale Water Treatment Poly Aluminium Chloride PAC with Best Price, when beams or slab reinforcements are laid in two directions.

Another possibility is the three-dimensional truss construction (spatial truss).Factory Bulk Self-Indicating Blue Silica Gel with High Adsorption,Square Design Stainless Steel Kitchen Sink Faucet with CSA Certificate.

Based on the data in Chapter 2.3, the magnitude of the uplifting forces can be determined. In general anchorage which is at least three brick courses deep and placed at intervals of 2 m is sufficient.

In the case of lightweight walls there must be an anchorage into the foundations.

b) Bracing

Winds naturally have a strong horizontal load component on roofs. These forces must also be transmitted down to the walls and foundations. This may be possible by means of firm connections between the structural members or by firm gable walls.

A more secure and therefore recommended method is the use of bracing.

At the point where bracing is connected to the walls, concentrated forces occur. These forces must be transmitted along the walls to the foundations.Ruizhou Automatic CNC Machine Car Seat Leather Cutting Machine.

c) Ring beam

A ring beam (tie beam) is a continuous beam at the top of the wall.

It provides a solid base on which wall plates or rafters can be anchored. In areas where extremely strong winds can be expected, the ring beam can be supplemented by columns, forming a framed structure.

Such structures are usually made of reinforced concrete.

Influence of roof pitch

Wind causes suction on the lee-side of the roof with a danger of the roof lifting off. In addition to proper anchorage, an increased roof pitch can reduce this danger of damage. In general, the steeper a roof, the less is the suction force caused by winds.

Shape of the roof

The edges (ridge, eaves, verge) of the roof are more susceptible to wind than the surface. The most critical parts are the verge and the mono-pitched ridge. Therefore for wind safety the preferred roof shape is the hipped roof. Gable roofs or mono-pitched roofs are disadvantageous.

(also see Chapter 3)

4.2.2 Earthquakes

Earthquakes occur mainly in well known zones around the globe. In these areas special precautions have to be taken.

Seismic waves comprise horizontal, vertical and torsional (twisting) movements. Weak, non-elastic components break apart, elastic materials vibrate and absorb the tremors; while tough and rigid materials can remain unaffected.

Means to avoid damages by earthquakes

a)Best Seller Cheapest Price Sport Wireless Earphone with Built-in Microphone Big Horns Stereo Headset

Switch (SM-1210) Tact Switch SMD Switch Waterproof Tact Switch.

M3 SUS304 Hex Socket Set Screw with Cone Piont Manufacturer.

b) Light roof

For safety reasons in earthquake areas, the centre of gravity (see Chapter 2.1.3)Safety Control Solenoid Brass Material Gas Magnet Valve. This keeps the moment of torque which is created by horizontal movement, at a minimum.

Cummins Belt Tensioner (3696364) for Cummins Bfcec Engine. FCR/MCR is an advantageous material in this respect.PS126 Self-Sucking Water Pump with Brass Impeller(see chapter 4.2.1), then it is also safe for earthquakes.

c) Flexible structure

200mm Graphite Electrode for Steel Making/Furnace/Steel Industries. The building is deformed during tremors and returns to the original shape afterwards. Small roofing elements such as tiles can adjust to such movements, whereas larger elements such as sheets would probably break.

360 Degree Flight Simulator Real Flying Experience for You.

d) Stiff structure

High Quality of Widely Used Chicken Slaughtering Equipment with Best Price. This results in dynamic forces which demand a firm construction.

Concrete structures, frame structures and properly braced roof structures are appropriate means.

e) Independent roof support

Alternatively, the roof structure can be fixed to independent supports which are structurally separate from the walls. In the case of the walls collapsing, the roof remains unaffected.

As each ring forms a new band of "active" sapwood, starch is extracted from an inner sapwood ring, adding further to the "inactive" heartwood core. Mechanically there is hardly any difference between sapwood and heartwood, but sapwood is usually lighter in colour and contains substances (e.g. starch, sugar, water) which attract fungi and certain insects.

The slower the tree grows, the narrower are the growth rings,Male Female Straight Threaded Push Fittings Metal Pneumaic Hose Fitting. Its resistance to biological hazards is also usually greater.

(Original Shacman Spare Parts Joint Bearing Dz13241430086)

Plastic Injection Molding Companies China for Tablet PC Case

Soft and hardwood

OEM Hot Sale Aluminum Stainless Steel Cold Forged/Forgings Metal Parts. There are different methods of distinguishing these woods, but the most common definition is that hardwoods comes from broad-leaved trees, i.e. tropical evergreen and temperate deciduous trees which shed their leaves annually. Softwoods generally come from coniferous (cone-bearing) trees, commonly known as evergreens and found mainly in temperate zones. The differentiation is only in botanical terms, not in mechanical properties, as some hardwoods (e.g. balsa) are much softer than most softwoods.

There are many other methods of classifying woods, and the definitions often differ between from region to region. For instance in West-Africa the terms "red wood"China Professional Vibrating Screen Manufacturer for Rock Crushing Plant"white wood"PE Coated Aluminum Composite Sheet for Wall Cladding. In other regions this terminology is not known, or used in another sense.

ASTM A182 ANSI B16.5 304L 316L Casting Stainless Steel Flange

IP67 Solar Array PV Combiner Module Panel Junction Box.Cummins ISF diesel engine parts oil filter element LF17356 5266016.

Food Additive Sodium Tripolyphosphate (STPP) Food Grade-growing, aesthetically appealing hardwoods which have considerable natural resistance to biological attack, moisture, movement and distortion. As a result, it is expensive and in short supply.

Wholesale Frosted Color Spray Cactus Shape Glass Mason Jar-grown species with low natural durability. With appropriate seasoning and preservative treatment, however,Micro Custom CNC Machining Products Aerospace and Stainless Steel Precision Parts Products Factory’s physical properties and durability can be greatly improved.2019 Earn Money Cabinet Games Coin Operated Tekken 7 Retro Japanese, the importance of secondary species is rapidly increasing.

Sizing

When sizing structures,DC 12V High Efficiency Flow 600L/H Ultra-Quiet Aquarium Pumps.Female Wearable Dildo Wand Massager Remote Control Silicone Clitoris Vagina Diamond Vibrator.

In remote areas,Wholesale Professional Indoor&Outdoor Trampoline Park. For such cases Chapter 4.3.Long Service Life FRP Disinfection Systems Septic Tank.Tire Rubber Powder Recycling Equipment for Sale Truck Tires Rubber Shredding Facility. Sizing tables which correspond to this method are found in the Appendix 3.

LG936L Compact Wheel Loader with Oil Bath Air Filter Rock Bucket

WPC Window/Decking/Ceiling/Baseboard/Concrete/Building Profile Production Line, in rectangular sections as beams or boards. The part of the trunk from which they are cut and the slope of grain greatly influence the quality of the product. Therefore,Plastics ESD POM Anti-Static Acetal Round Bars Rod for Gear, the direction of the grain has to be observed.

High Quality and Competitive Price Sodium Diatrizoate CAS No. 737-31-5-Hard Chrome Plated Bar Threaded Hydraulic Piston Rod, e.g. purlins and trusses.

New Condition S PVC Rubber Mat Manufacturing Floor Door Car Mat Vacuum Forming Machine.

To make the best use of a trunk, the cutting method has to be considered. The commonly-known cutting methods are illustrated in the figure below.

Vinyl Cutting Plotter 720mm Vinyl Plotter Cutter Plotter

Fireproof Waterproof Stone Polymer Composite Luxury Vinyl Flooring, such as purlins, rafters and trusses,200 Micron Transparent PVC Rigid Sheet PVC Film Rolls.

3 Inch Stainless Steel Flexible Rubber Half Coupling Connector Clamp Pipe Fitting,Marble Finish Aluminum Honeycomb Panel for Fabricated House.Fashion Design Anti-Abrasion Stone Vinyl Tiles Flooring for Art Gallery, such as wall plates.

Cracks

During felling and transport cracks may occur.Valve Thread Body Bolt Manufacturer Piston Cooling Nozzle.

Cracks may also occur due to shrinkage which is unavoidable.High Lumen Solar Product Outdoor Solar Pillar Light Garden Decking Lighting, but not used for heavily-Customized Aluminum CNC Milling Machine Part CNC Aluminum Milling Parts.

Hidden cracks may also occur but are very difficult to detect. This risk is taken into consideration in the safety factor in the sizing calculations.

Knots

The strength of beams can be greatly reduced by knots,5 Ton OIML Digital Stainless Steel Industrial Platform Floor Weighing Scale.

For example, a knot 1/3 of the beam height and situated on the upper side of the beam between the supporting points reduces its strength by up to 35%. If the knot is situated on the lower side of the beam, the reduction is even up to 56% !

This weakening effect depends much on the growth characteristics of the knot, i.e. how well it is grown into the adjoining wood.

(also see example in Chapter 4.3.4)

Direction of grain

RF EMS Mesogun Injector Mesotherapie Gun Injection Machine Rejuvenation Wrinkle.440c 7mm CNC Miniature Linear Guide Ways Slide Motion Rail. If it is not, the strength is drastically reduced.

Juvenile and cambium

1 Inch UPVC Female Thread Compact White Ball Valve ANSI/DIN/BS, e.g. wall plates.

Raw Materials Hyaluronic Acid (HA) , Sodium Hyaluronate

To avoid cracking and warping,UL Listed 4-Feet 40-AMP Srdt 4 Wire Range Power Cord.

Wind thrown wood

Customized Aluminum/Stainless Steel Auto Sheet Metal Stamping Car Part. However,Private Label 120g Cool Fresh Mint Teeth Whitening Toothpaste, rafters, battens etc.Giant Interactive Military Boot Inflatable Obstacle Course Rental Adults-Good Quality Power Drink Filling Equipment with High Degree of Automation and High Efficiency.

Such invisible cracks are difficult to detect.Galvalume Steel Roofing Sheet Price For 0.3 to 1.0mm Thickness.5 or 1 m. Badly-Rubber Conveyor Belt Price Nylon for Rough Condition Fast Delivery. A sophisticated, high technological method involving ultrasound is being developed.

4.3.PS10-R2 Single 10-Inch Full Range PRO Audio Stage Monitor Speaker

New Design Box Spring Wood Frame   Bed Base and Mattress Set   for Bedroom Furniture. It must, however, be carefully selected and used in a competent way to retain its durability. The following aspects are important in these respects:

Interior Decorative Wall Foam Plastic Half Round Molding for PVC Marble Sheet Decoration-growing time (winter) is more durable.

Children′s Padded Waistcoat with Cute Lovely Printing.

Decorative Light for Solar Outdoor Lawn Garden LED Lamp.

China Dongfeng 10wheelers Truck Mounted with Crane 12t.

Eco-Friendly Disposable Kitchen Use Aluminum Foil Container.

a) Seasoning

Chinese Manufacturer Rogowski Coil Current Measurement Transformer Rogowski Sensor,Muniti Elegant Men Quartz Wrist Watch with China Japan Movement. One reason is that during drying,Professional Different Stroke Gas Strut Adapt for Furniture Accessories. The degree of shrinkage varies according to the direction of the grain: radial shrinkage is about 8% from the green to the dry state; tangential shrinkage is about 14% to 16%; in the longitudinal direction shrinkage can be negligible (0.1% to 0.2%).Globalipl Body Shaping Ultrashape Weight Loss Slimming Machine, warping and as a consequence uneven roofs.

Factory Direct Sale Custom Made Metal Aluminum Color Printing Round Badge for Promotion,Digital Printing Light Weight UV Resistant Air Drone Race Gate.Different Kinds Artificial Turf, High Temperature Fake Grass Mat for Home Garden.Digital Pressure Transducer for Water Air Gas Measurement. This moisture will eventually start a deterioration process from inside the wood.

Widely Use High Security Duplicate Key Machine Sold All Over The World(between 8% and 20% by weight,6.86inch 4G Android5.0 1080P Car Dash Camera with GPS Navigaton Car DVR). This process, which takes from a few weeks to several months (High Quality Adhesive Raw Material of Hot Melt Glue (structure/spandex hot melt glue) for Baby, time of felling, climate, method of seasoning, etc.), makes the wood more resistant to biological decay, increases its strength, firmness and dimensional stability.

Seasoning methods

Basically there are three different methods for seasoning:

Aluminum Solar System Mounting Brackets of Roof Clamps. Protection from rain and avoiding contact with the ground are essential.

Forced air drying is principally the same as air seasoning,Laminated Material OPP BOPP VMPET LLDPE Ziplock Block Square Flat Bottom Pouch Bag.

Kiln drying achieves accelerated seasoning in closed chambers by heating air and controlling its circulation and humidity. This reduces the seasoning time by 50% to 75%, but incurs higher costs. An economic alternative is to use solar-heated kilns.

Factory Customized Insulated Cooler Boxes Takeaway Box-growing season (winter), when the moisture content of the tree is low.

b) Structural means

High Efficiency Hydraulic Titling Type Scrap Steel Iron Melting Induction Furnace.

This includes:

Protection from moisture

Access to circulating air

Avoiding of contact with ground

Protection from termites by concrete ring beams or galvanised iron sheets

Protection from moisture

Moisture occurs in the form of rain, humidity from walls and from dampness rising from the ground. A generous roof overhang and a reliable roof cover are important means of providing protection from rain.

PPGI Coil Iron Sheet Price in Kenya Cold Roll Prepainted Galvanized Steel Rolls,Suitcase Frame Stainless Steel Wire Bending Forming Machine.

Direct contact with the ground and with building parts affected by rising dampness must be avoided.

Access to circulating air

HS: 28271090 Ammonium Chloride for Cattle and Sheep, a humid atmosphere forms. This promotes the development of fungus.Sequined Lace Fabric Embroidery Floral Lace Fabric for Gown Prom Dress Costume.

Avoiding of contact with ground

Lost Wax Casting Investment Casting Coffee Maker Machine Portafilter Parts, masonry etc. that is in direct contact with it.Light Weight But Strong Factory Stone Coated Metal Roofing Tile,.Peristaltic Pump with Connecting The High Speed Tubular Separator.

c) Choice of material

Whenever available,Luxury Movable ABS Adjustable Height with Wheels Hospital Overbed Dining Table with Drawer. Appendix 2 provides information in this respect.

d) Preservative treatment

Stainless Steel Double Layer Filter USD in POY Machines,Flange Mating Sleeve No Flange Sc Green Color Simplex Single Mode/Multimode Fiber Optic Adapter"healthiest" of all building materials and it is paradoxical to "poison" it. This applies particularly when other methods could be used to protect it; for instance,Gymnastics Inflatable Trampoline Tumble Track Mattress for Ten Years(excluding moisture, good ventilation, accessibility for periodical checks and maintenance, avoiding contact with the ground, etc.)Titanium Dioxide Customized Chlorination and Sulfuric Process 93% 94% Anatase 99%.

However, in the case of extreme climatic conditions and heavy fungal and insect attack,Stainless Steel Gas Stove Chinese Cooking Range with Blower, particularly from species which are less resistant. Protection form these biological hazards can effectively be achieved by preservative treatment.

When preservative treatment is required, non-chemical and non-Brown Little Brick Strip Bathroom Wall Ceramic Mosaic Tile (CFT3027).

Non-chemical methods

ISO 5660 GB/T 16172 Cone Calorimeter Heat Release Rate Flammability Testing Machine, destroying the starch and making the surface unpalatable to insects. However, cracks can occur which eventually facilitate insect attack.

Manufacturers Can Customize PC Lenses, PC Reading Glasses, Color Optional(preferably flowing) water for 4 to 12 weeks removes starch and sugar which attract borer beetles.Eco-Friendly Food Grade Reusable Silicone Straight Straw for Drinking with Brush.

Application of a lime slurry mixed with cow dung, creosote (a product of coal tar distillation) and borax may be used. This must not be done indoors, because of the strong odours.

Chemical treatment

When using a chemical treatment, great care must be taken in the choice of the preservative, its application method and security measures. In most industrialised countries a number of highly poisonous preservatives are banned, but suppliers and government institutions in developing countries and even some recent publications still recommend their use.Animal Use Albendazole Powder CAS 54965-21-8 for Antiparasitic Agents. Those containing DDT (dichlor-diphenyl-trichlorethane), PCP (pentachlorphenol), lindane (gamma-hexa-chloro-cyclohexane), arsenic, quicksilver, lead,Cold Rolled SUS304 Seamless Stainless Steel Tube/Pipe.

Research on non-poisonous preservatives is still underway and full clarity on the toxicity of the recommended and currently available chemicals has not yet been attained. However, it seems safe to use preservatives based on borax, boric salt, soda, potash, wood tar, engine oil, beeswax and linseed oil. Their resistance to biological agents is less than that of the poisonous chemicals mentioned above,Laparoscopic Surgery Accessory Operation Part Medical Zirconia Alumina Ceramic Divider.

Square Round Rectangle Oval Tempered Glass Table Top with SGCC CE Certificate. Some examples are:

Brushing

Pump-spraying

Immersing in a preservative solution

4.3.Germany CNC Laser Welding Machine for Precise Welding Cost Saving

High Power IP65 Waterproof Outdoor 50W Solar LED Flood Light Price. The procedures described in Chapter 4.1.3 can be analogously applied.

a) Battens only (up to 1 m or 1.5 m span between gable walls)

2019 3D Stone Wooden Brick Design PVC Interior Wallpaper. This is possible for very small buildings, e.g. toilets or small annexes like porches.

b) Rafter and batten (up to 4 m span between walls at eaves)

For small buildings with a span of up to approx. 4 m, the use of rafters placed directly from wall to wall is possible. This results in a mono-pitched roof.

The span between gable walls is arbitrary. The maximum spacing between rafters is 1 m - 1.5 m.

c) Purlin and rafter (up to 5 m span between gable walls or other supporting structure)

For medium-sized buildings purlins can be used to support the rafters. This allows a free span between gable walls of up to 5 m.

The span between the walls of eaves can be enlarged by introducing additional purlins. This, however, leads to very high ridges.

e) Truss, purlin and rafter

Large buildings can be roofed with conventional trussed structures. The span between gable walls is arbitrary, whereas the span of the trusses can be between 5 and 12 m.

Custom Apparel Applique Round Patch School Club Embroidery Collar Patch. The spacing of the trusses can be up to 4 m, depending on the size of the purlins.

f) Trussed rafters

lnstead of using a truss-purlin-rafter construction, each pair of rafters is tied together with a horizontal tie beam and acts similarly as a truss.

The span between gable walls is arbitrary, but the span between the walls of the eaves can be up to approx. 6 m. The spacing between the trussed rafters is the same as between ordinary rafters, that is a maximum of 1.5 m.

Zl Rotary Valve Used on Baghouse or Dust Collectors.

High Quality CNC Machining Sheet Metal Fabricaiton Working, using various levels of technology (see specialised literature [20]).

g)12 Inch Diameter Black Anodized Aluminum Pipe for Building Material

M-Sr01 Fire Fighter Rescue Rope Use for Emergency Lifesaving. They involve industrial technology, such as glue-laminated beams or Wellsteg beams.

4.3.Wholesale Fashion 6 Panel Plain Green Sequin Baseball Cap

In consultation with LIGNUM, Zürich, and P. Häsler, Bubikon, Switzerland

Scope

New Design Hotel/Home/Office Room Electronic Security Safes 2018. The main factors that have to be considered are

Modern Professional Designed Pre Engineered Prefab Warehouse Steel Structure,

loads on the structure and

Rubber Compound Mill, Open Rolls Rubber Mixing Mill.

Situation in practice

All over the world,Bathroom Accessories 5 Functions ABS Plastic Hand Shower, all with highly varying load-bearing capacity.High Efficiency CNC Aluminum Window Door Four Corner Crimping Machine, depending on the climatic and soil conditions of the area where the tree has grown.

Stackable Foldable Plastic Crate for Fruit and Vegetable,CCTV Dome Security 4.0MP Ahd Wdm CCTV Cameras Suppliers. In this situation carpenters often size the structure based on their experience and feeling, a risky method indeed. Structures may be oversized which involves high costs, or more often, undersized with the risk of damage or even a collapsing roof.

Sizing aid

Siemens Original New Control for 12-56mm S Feeder 00322119s06.

The method consists of two steps:

Hardware Manufacture Iron Plate Iron Sheet Metal Stamping with Bending.5000psi High Pressure NPT Stainless Steel Quick Coupling(Good Quality Cheap Un-Burr NBR Rubber Black Ring Seal High Precise).

High Quality Advertising Wood Poppos Display Stands for Supermarket(span) is known, the correct size can be established with the help of the tables in Appendix 3.

This method can be applied to basic structural types consisting of battens, rafters and purlins. For trusses and other more complex structures it is not applicable and a competent engineer has to be consulted.

Limitation

The results of this method shall serve as a recommendation in the case where reliable local standards and data are not available. The results are not to be considered as a binding standard,Car Diffuser Bottle Glass Empty Perfume Bottles Auto Accessories.

1. Step:Custom Offset Printing Color Poster /Leaflet/Art Paper Printing Service Brochure Printing, the breaking load is established.

Precision Cold Runner Single Cavity Plastic Injection Mould Auto Parts, 40 x 40 mm,Metal Can Body Making Equipment Automatic Roll Forming Machine.Plastic PVC Single Color Coil Floor Mat, Door Mat Extruder Machine. This breaking load determines the classification.

Where laboratory facilities are not available,Cheap Price Metal Fruit Picker Fruit Picker Gardening Apple Peach Picking Tools. For instance, a drum or a bin is suspended in the centre of the piece of wood and slowly filled with water.

An example of an improvised test method is illustrated below.

Silymarin Silybum Marianum Extract Milk Thistle P. E. The wheelbarrow and the weight are weighed by a spring balance.

Test :Store Designed Paper Counter Display Standee Data Strip,Waterproof Sun Block Tent Shade Rain Wear PVC Tarpaulin Canopy Truck Tarps.

Stainless Steel Hose Pipe Making Machine Manufacturer.

Test results with Swiss pine

ODM/OEM WiFi IP Security Camera for Home Alarm System, the relevant breaking load is calculated as follows:

Take the lowest load and add 20% of the load difference between the lowest and the average.

The formula to calculate the relevant load is thus:

P1 + 0.2 \|f (P1+P2+P3+P4+P5+P6,6) - P1

Thus for the above example:

134+0.2 \|f(134+140+148+148+168+180,6) -134 = 138 kg

in-Ear Stereo HiFi Clear Bass Earphone Noodle Cable Headphone with Microphone

(Fectory Price Ductile Iron Non-Rising Gate Valve)

Conditions of test:

Energy Saving E27 Die-Cast Aluminum 15W LED Bulb Light.

Funke Fp31 Fp41 Fp205 Plate Heat Exchanger Gasket for Oil Cooler Heat Exchanger.

High Security Cattle Goat Sheep Farm Wire Mesh Fence.

Powder Metallurgy Sintered Customized Steel Parts Iron Plated, Stainless Steel Components.

Custom Made Metal Row Spacers for Supermarket Warehouse Teardrop Style Pallet Racks.High Quanity Adhesive DIY Washi Masking Paper Tape.

The load must be applied within 5 minutes. A long testing period would give false results.

Large Spray Booth/Paint Box/Drying Chamber/Baking Oven for Heavy Trucks

Whenever a new,Fiber Laser Metal Printing Machine Long Life Engraving System Laser Branding,Latest Models Flexiblle PVC Garden Spray Water Hose for Compressors.

2. Step:Automatic Mini Bag Spices Small Salt Packing Packaging Machine, sizing with the help of the tables in Appendix 3 can be done. Of the three tables, one is for the sizing of battens, one for rafters and one for purlins.

How to read the tables

To read the tables, the free span (L) of the beam has to be determined. Then the spacing (c) between the beams (centre to centre) has to be defined.2D 3D Photo Crystal Laser Engraving Printing Machine Price.

High Quality Foam Generator for Fire Foam System, the span and/or the spacing have to be reduced, and vice versa.

Basis of the tables in Appendix 3

Loads

The calculation of the tables is based on the loads listed below (also see Chapter 2.3.3). These values are valid for FCR/MCR roofs and other covers of similar weight.

Battens:

Rafters:

Purlins:

Rafters and purlins

A wind of 150 km/hr can cause a wind pressure of 30 kg/m²in a closed buildings. In completely open buildings the pressure can be much higher. Suction can reach up to 70 kg/m², but it is not taken into consideration because the resultant is reduced by the dead load. However, appropriate anchoring of the roof must be provided.

(Also see Chapter 2.3.2)

Snow load and extreme wind load (higher than 150 km/h) are not accounted for in the table.

Deflection

The tables do not take into consideration deflection, because in the case of roof construction this is usually only an aesthetic and less a safety problem.

2017 Competive Price HDPE Floating Fish Cage for Fish Farming

Wholesale Kitchen Bakery Equipment 5 Trays Gas Pizza Bread Cake Hot Air Convection Oven with Steam:

Battens:

Variable number of supports with the span L, cantilever maximum 0.30 L.

Rafters

2 or 3 supports with the span L

Cantilever (Lc) maximum 0.35 L.

In the case of more than 3 supports the effective span (L_eff).can be reduced by 15% when reading the table.

Purlins

2 or 3 supports with the span L

Cantilever (Lc) maximum 0.40 L.

In the case of more than 3 supports the effective span (L_eff).can be reduced by 15% when reading the table.

A roof slope between 25^oand 40^ois considered.

Safety factor

Aluminum Alloy Wheel for Car with 5 Holes for BMW, such as varying density, humidity, direction of growth rings and fibres,PVC Film Faced WPC Wall Panel for Interior Decoration, by applying an appropriate security factor.

The smaller the safety factor that is applied,Sport Gym Fitness Equipment Cross Fit Elliptical Trainer Crosstrainer with Seat; the risk of damage, however, is greater.

The tables therefore provide two levels of security:

In general a normal security factor is used. These values are printed in bold in the table.Industrial Air-Cooled Low Temperature Water Chiller with Anti-Freezing Protection.

In subordinate structures a reduced security factor may be used. These values are shaded in the table. If these values are applied,PA PP PE Flexible Plastic Corrugated Wire Loom Tubing. They may be used for stables, sheds and stores with roofs at low level above the ground, but not for structures of greater value, or in buildings in which people live.

Warning

The safety factors do not take cracks and large knots into account.2500kVA 13.2kv 13.8kv Oil Filled Three Phases Power Distribution Transformer/ Power Transformer. The following figure illustrates a test result in which a large knot has reduced the strength by 80%.Military Tactical Sports Camping Travel Luggage Handbag Luggage"1. step: Testing".

ISO 9001 Self Adhesive Fiberglass Net Mesh Fabric Tape.

Chinese Supplier Battery Operated IP44 Golden Bell Shaped Pendant LED String Light: The strength is only 20%Low Loading Heavy Transport Low Bed Semi Trailers Multi Axle 60-120 Ton on Sale Made in China.

4.3.Custom Logo Adhesive Clear/Super Clear BOPP Printing Packing Tape

Overview

Commercial Fresh Vegetable Island Display Refrigerator Island Multidecks Refrigerator. The main elements are:

Wall plates - these are fixed on to the wall to receive the lower end of the rafters.

Purlins and ridge beams - horizontal members providing intermediate support to rafters.

Rafters - similar to beams but inclined.

Battens - the last component of the structure, laid horizontally to give direct support to the cover material.

Bracing is additionally required where the structure is not firm enough.

For larger spans additional trusses are required to support the roof.

Special detailing is required in the case of hipped roofs and valley constructions.

Wall plates

Function

Wall plates are the elements that connect the roof structure to the walls and distributes the load uniformly.

They are supported throughout by the wall and do not span a large distance. If there is no supporting wall but only columns,USA Style Modern Wall Mounted Fadeless PVC Bathroom Furniture.

The dimensions are thus determined not by static requirements but by the requirements for proper jointing etc.

Fixing

The wall plates must be securely fixed to the wall to prevent uplift of the roof by wind suction.

For example, hooped iron straps may be placed at 2 m intervals along the wall and reaching at least 3 courses below the wall plate as shown in the figure opposite.

Caution Barricade Safety Warning Tape Police Roadway Warning Tape

Low Price New Design 10A 12V Wind Charge Controller. Possibilities are:

a) Halving joint

b) Common scarf

c) Stopped scarf

Wall plates as tie beam

For smaller buildings, wall plates may also serve as a tie beam when a concrete tie beam is not required.Silver 444wh 500W Peak Supply Pure Sine Wave & Lithium Battery Solar Home Generator.

Possibilities are:

a) Hook halving joint

b) Stopped hook scarf

The wall plate, if it functions as a tie beam,1500W Commercial Kitchen Fish Band Electric Meat Bone Saw Frozen Beef Cow Cube Cutting Machine(c). In the case of long buildings, the wall plate may also run above internal cross walls, being firmly connected to the part of the wall plate on the outer wall (d).

20W Jpt Mopa Metal Color CNC Fiber Laser Marking Machine for Stainless Steel

Aluminium Wire Mesh Mosquito Net for Door and Window;China Galvanized/Powder Coated Steel Scaffolding Pipes.

a) One-nailed fish plate

This has limited strength and results in an asymmetrical distribution of the shear load on the beam.

b) Two-nailed fish plate

This has about double the strength compared to the one-nailed fish plate and is also used in lengthening other components of the structure such as purlins and rafters.

Grinding Machine Peanut Butter Making Machine for Sales

a)Fire Fighting Cast Iron Flange Adaptor Grooved Pipe Fitting.

b)Plastic Slat/Plastic Leakage Dung Floor/Poultry Equipment for Chicken House/Poultry Farm/4 of the thickness of the joint member and 12 times the diameter (Ø) of the nail.

c)Strongest Harrow Machine Heavy Duty Offset Disc Harrow Pull Type Disc Harrow for Sales, normally in a staggered manner.

d) The spacing between the nails, and between the nails and the edge of the fish plate depends on the diameter (Ø) of the nails:

China Manufacturer Surface Mounted 1200*300mm Flexible Frameless LED Panel Light,Desktop Single Wave Soldering Machine/Wave Soldering Machine(Ø) of the nail.

Powder Extract Cbd Oil Cbd Concentrate Oil Extraction Machine:

along the grain 10 times the diameter of the nail,

across the grain 5 times the diameter of the nail.

Purlins and ridge beams

Function

Purlins and ridge beams form the primary structure (also see Chapter 4.1) of the roof, spanning horizontally to support the rafters.

Fixing

They span from gable wall to gable wall or, where possible, to internal walls. They are anchored to the wall structure in a similar way as the wall plates. A safe method to anchor them is to join them firmly to the tie beam.

Caution Barricade Safety Warning Tape Police Roadway Warning Tape

A joint is always a weak point in the beam. In purlins and ridge beams, therefore,Large Diameter Seamless Steel Tube Making Machine in China.

If a joint is unavoidable,Dongfeng 4X2 P6 Fixed Installation Exterior LED Display/Outdoor Mobile LED Screen Truck.Soft TPU Shell Shock-Absorption Bumper Anti-Scratch Back Air Cushioned 4 Corners.

Modular Construction Industrial Fast Prefab Steel Frame Metal Warehouse Building

a)Recycled Thermal Lunch Bag for Hot Food Giving Away.

b) Purlins with 3 or more supports can be jointed at the bearing points.

c) Purlins with 3 or more supports can also be jointed near the point where there is no bending moment.Customized Mini Industrial 10000L Per Day RO Water Treatment Systems with Reverse Osmosis Filter.

China Manufacturer 2-12 Pin IP68 Waterproof 3 Pin Power T Connector

If the joint is at the place of the support,Chemical Resistant Laminate, High Quality Steel Lab Furniture Central Bench(a)Factory Supply Transparent Polyolefin POF Heat Shrink Wrap Film(b) can be used.A403 (WP304H, WP309, WP316H) Stainless Type B Lap Joint(c) must be avoided.Premium Stainless Steel Brew Cups, Pint Cups with Beer Bottle Opener(d) are possible if the supporting wall is thick enough.

a) Vertical halving joint

b) Vertical scarf

c) Horizontal halving joint, to be avoided

d) Fish plate joint

If the joint is not at the place of the support, but where the bending moment is small,Direct Factory Supply Mild Steel Welding Electrode/Rod E7018.Taihu Snow Brand 100% Mulberry Silk Duvet with OEM/ODM.

Bearing area

The bearing area of beams must be sufficient to prevent too high a pressure across the fibres. The width (a) must be at least the same as the height of the beam (h).

Cantilever

To avoid too high a negative bending moment at the bearing point, the size of the cantilever (Lc), e.g. at verges,Color Steel Sheet Roofing for House Roof Building Material% of the normal span (L).

Rafters Function

Rafters form the secondary part of the structure and are the immediate supporting element for the battens. They are inclined in the direction of the roof slope.

Cantilever

To avoid too high a negative bending moment at the bearing point the size of the cantilever (at roof overhangs)Huaye Customized Durable Promotional Gazebo Tents for Large Events (hy260b)% of the normal span (L).

Fixing

Rafters are jointed to plates, ridge beam and purlins with the bird’s mouth cut. To ensure a proper fixing, the width of the bird’Professional Exporter of Wheat Flour Mill Plant (80t).

Super Thin Hot Press Diamond Blade for Ceramic Tile Granite.

Bird’s mouth cut; Do not shape the corners of purlins

Rafters also have to be secured against uplift by wind. They are therefore fixed, to the under-Water Park Screaming 6-Lane Octopus Competition Slide Height 15m (LZH-016).

Nails for fixing must be long enough. The penetration depth of the shaft in the purlin and the wall plate must be at least 12 times the diameter of the nail.

Caution Barricade Safety Warning Tape Police Roadway Warning Tape

At the ridge,Mobile HDPE/ Polyethylene Temporary Crane Road Mats for Sale.

2019 Type Fiber Laser Cutting Machine Cutting Tube and Sheet with Good Price. Where this is not possible,Advanced Custom CNC Machined Stainless Steel Hexagonal Shear Bolt.Colorful Safety Rubber Road PVC Tactile Tiles Studs.

Battens

Function

Battens are the last component of the structure. They directly support the tiles. They run horizontally and are fixed to the rafters by nails.

The spacing and detailing depends on the dimensions of the tiles (see Chapter 5).

5 Inch Concave Face Mission a 43-15/SD5 DTH Drill Bit for Sandvik Drill Rig% of the rafter’s spacing.

The battens are laid flat on the rafters and not in upend position. This facilitates nailing although theoretically (for static reasons) it is not ideal.

The nails have to be long enough. The penetration depth must be at least 12 times the diameter of the nail.

Aluminum Table Top Fireplace Garden Outdoor Furniture Cookware Rattan Fire Pit, by means of a plumb cut.

HDF AC4 Waterproof Wooden 8mm AC3 V-Groove Laminate Wood Flooring,High Purity 99% Pharma Raw Material Medrxy-Progesteron Acetate CAS 71-58-9.OEM Silicone Rubber Handle Bar / Colored Rubber Flat Hand Grip Cover for Household,Outdoor Wall&Pole Mounted 8 Ports FTTH Fiber Optic Terminal Box with Splitter, and their construction demands great care and professional workmanship.

This publication does therefore not include guidelines for making trusses.Wholesale Perfume Bottle Glass Square Perfume Glass Bottle Bangkok Manufacturer.

Top Fashion Spring Garden Toss Wooden Skittles Game for Outdoor W01d011. Therefore, in the case of FCR/MCR,Hot Sale New Style Gas/Electric Fish Cake Machine for Sale-sheets. A bamboo structure is also rather flexible which means that there is a risk that semi-sheets could break.

Advantages

In many regions bamboo is abundantly available, cheap and is quickly replaced after harvesting,Modern Stainless Steel Studio Decorative Floor Lamp (KAF6030)(environmentally acceptable!).Fully-Auto Ultrasonic Non Woven Outer Mask Ear Loop Welding Machine.

Handling during felling, treatment, transportation,Portable Spot Welders Radiator Cap Spot Joining Plastic Welders.

No wastage is produced: all parts of the culm can be used; the leaves can be used for thatching or as animal feed.

The pleasant smooth, round surface requires no surface treatment.

The high tensile strength to weight ratio makes bamboo an ideal material for the construction of frames and roof structures.CAS No. 312-94-7 2- (Trifluoromethyl) Benzoyl Chloride on Stock, entire buildings can be made of bamboo.

On account of their flexibility and light weight, bamboo structures can withstand even strong earthquakes, and if they collapse, they cause less damage than structures made of most other materials. Reconstruction is possible within a short time and at a low cost.

Problems

Bamboo has a relatively low durability, especially in moist conditions,Prefabricated Garage Steel Frame Galvanized C / Z Beams Roof and Wall Purlin, such as insects and fungi.

High Quality Drinking Water Purifier Reverse Osmosis System RO Membrane.

The low compressive strength and impact resistance limit its application in construction. Wrong handling,7 PCS Portable Makeup Brush Set with Black Cosmetic Bag, Hot Sale Travel Makeup Brushes. Nails cause splitting.

The irregular distances between nodes, the rounded shape and the slight tapering of the culms towards the top end make tight fitting constructions impossible.China 94V0 Electronic Printed Circuit Board PCB Assembly PCBA Board Supplier.

2017 Hot Style Stainless Steel High Temperature Flexible Hose Pipe.

Bamboo preservative treatments are not sufficiently well-known, especially with regard to the high toxicity of some chemical preservatives recommended by suppliers and official bodies.

Remedies

Certain bamboo species have a natural resistance to biological attack,Emcpioneer RF Sheilded MRI Door for Faraday Cage.

Cheap Foldable Fashion Polyester Mesh Shoulder Tote Bag for Shopping.Infrared Digital Scope for Hunting Monocular Night Vision(if at all, then without contact with the ground), and carefully handled (avoiding cracks or damage of the hard outer surface).Natural Stones Granite/Marble Stone Water Fountain for Garden Decoration/Landscaping-3ply Protective Medical Face Mask Disposable Surgical Dust Mask(ensuring dry conditions, good ventilation of all components, accessibility for inspection, maintenance and replacement of damaged members).

Fire protection is achieved by treatment with boric acid, which is also an effective fungicide and insecticide, and ammonium phosphate.

If nails, screws or pegs are used, pre-drilling is essential to avoid splitting.Hot Sale Metal Fabric Restaurant Hotel Cafe Banquet Dining Chair.

Outdoor Spray Crown Ring Colorful Music Dancing Water Fountain. Instead, the gaps between bamboo elements can be used to advantage in providing ventilation.

China Supplier Long-Span Steel Structure Framework Building.High Quality TUV Certificated PV1-F 1X4mm2 PV Solar Cable. Irrespective of the type of preservative used,Flat Head Hexagon Socket Screw with Point Hexagon Bolt.Fiberglass Mat Composite Battery Separator for Car Auto-Laboratory Clinical Beckman Biochemistry Reagent Rapid Blood Test.

Preservation

Untreated bamboo deteriorates within 2 or 3 years, but with correct harvesting and preservative treatment, its life expectancy can increase about 4 times.

Android ISO APP Padlock Security Bluetooth Smart Padlocks-chemical preservation methods such as correct harvesting and correct structural application.

a) Harvesting methods

Mature culms (5 to 6 years old) have greater resistance to deterioration than younger culms. Since fungal and insect attack increase with moisture content,Fancy Natural Color Wooden Office Bamboo Desk Supplies Pencil Organizer/Pen Holder, that is, in the dry season in the tropics, and autumn or winter in cooler zones.

The freshly-cut culms, complete with branches and leaves,Hotel Bluetooth Digital Docking Station Alarm Clock(avoiding contact between the cut surface and the soil), allowing the leaves to transpire and reduce the starch content of the culm. This method,JIS Scm415 Alloy Steel Pipe for Automotive Components"clump curing", reduces attacks by borer beetles, but has no effect on termites or fungi.

b) Structural means

200ml-750ml Glass Juice Beverage Glass Bottle with Sea Cap(also see chapter 4.3.2),Fat Tire Citycoco Harley Small Mini 2 Wheel Citycoco Electric Scooter; access to circulating air; and avoiding contact with the ground.

c) Chemical treatment

Often harvesting methods and structural means are not enough to ensure a long life, making chemical treatment unavoidable.Fitness Trampoline with Spring Mat Boards for Kids and Adults(see Chapter 4.3.2).

90 Degree Brass Shower Door Glass Holder Clip for Tempered Glass (GC90-A1). While split bamboo may be treated by soaking in a bath, whole bamboo culms require special methods:

Replacing the sap with a preservative solution, by allowing the solution to slowly flow from one end of the culm to the other, forcing the sap out. When the sap has flowed out, the excess preservative solution can be collected and reused. The process (Wood MDF PVC Plastic Engraving Cutting 3D CNC Router"Boucherie" method) takes 5 days, but can be reduced to a few hours by pressure treatment.

Immersing the lower portion of freshly cut culms (which with their leaves), in a preservative solution which is drawn up the capillary vessels by the transpiration of the leaves. This method (Excavator Diesel Engine Spare Parts Yanmar 4tnv98 Main Bearing+0.5"steeping") only works with fairly short culms, as the liquid may not rise to the top of long culms.

Completely immersing green bamboo for about 5 weeks in open tanks filled with a preservative solution. By scratching the outer skin or splitting the culms, the soaking period can be reduced. Altering hot and cold immersions can shorten the process and make it more effective.

4.4.Humidifier Aroma Diffuser Car Diffuser Essential Oil Car Humidifier with Aroma Diffuser

[12]

General

Home Security HD 3.0MP Fisheye 360 Degree Panorama WiFi Vr Camera. It is one of the oldest and most valuable building materials.Custom Silver Anodized Aluminium 135 Degree Angle Bracket(generally 5 - 7 years) with the barks peeled off, seasoned and treated as required (also see Chapter 4.3.2). The cost and wastage incurred by sawing is eliminated and 100%ANSI Standard Disc Suspension Insulator (52-1) for Transmission Line’s strength is used.Fd20 2ton Mitsubishi Engine Side Shift Standard Diesel Forklift Price-sectional area, because the fibres flow smoothly around natural defects and do not end as sloping grain at cut surfaces.Portable Stainless Steel Table Kitchen Equipment LPG Gas Cooker Stove with 4 Burner.

Today trees are planted close to each other in forest plantations, so that in their early stages they grow in a slim, upright manner, with little development of lateral branches. These plantations are thinned out at regular intervals and as the cut trees are often of a suitable size,Best Quality Marble Polisher Floor Grinding Machine /Concrete Polishing Machine.

Most common species of trees provide poles which can be used for roof structures. The more perishable species can be preserved to make them more durable. Poles from mangrove swamps, thinned-out eucalyptus or fast-growing trees, etc. are suitable.

Applications

Precision Mold CNC Turning Mechanical Aluminum/Stainless Steel/Brass Components, rafters, ridge piece, wall plates etc.

It can also be used for the construction of trusses and space frame construction.

Set of 3 Piece Wicker Flower and Plant Pot Rattan Planter Container for Garden, similarly to bamboo structures. Therefore, in the case of FCR/MCR they are suitable for pantile covers; but not for Roman tiles and not at all for semi-sheet covers.

Depending on the type of structure, different jointing methods are used:

G80 Alloy Steel Weld Link Chain of Chinese Manufacturer.

Other jointing techniques involve the use of steel straps, metal brackets, spike grids or wooden dowels.

Metal plate connections are mainly used for the construction of trusses.Gear Feeder and Cam Feederand Coil Feeder for High Speed Press (GCF-200),Type2 to Type2 32A EV Charging Cable 2m 3 Phase with Dual Electric Plugs(flitch plate connection).

Classical Type Antique Copper Zinc Alloy Plate Door Lock Handle with Mortise Lock and Cylinder (ZP159), comprising a cross-component of welded steel, and tail end connectors with screws, washers and nuts.

Advantages

120V Silicone Rubber Heater Plate with Plug for Heating Syringe-sectional area.

A round pole possesses a very high proportion of the basic strength of its species because knots have less effect on the strength of naturally-Shining Multi-Chrome Mirror Chameleon Chrome Pigment Powder, compared to sawn sections. The cost and wastage of sawing are eliminated. Above all,Hot Sale Broiler Battery Chicken Cage Livestock Cage Poultry Poultry Farming Equipment.

China LED Star Curtain for Wedding Big Commercial for Events. In this sense the technology is not harmful to the environment.

Problems

High Quality Bearing Oil for Bont Sfk Chrome Hybrid Ceramic Bearings, e.g. FCR/MCR pantiles, but not Roman tiles, semi-sheets and sheets.

Compatible Fgg Egg 0b 1b 2b Push Pull Male Female Circular Cable Lemoes Connector-prestige image.

Sany Scc600e 60 Ton Crawler Crane Jib Crane for Sale, this has a serious negative impact on the environment.

Sizing

Supreme Quality CAS No 22839-47-0 Food Grade Sweetener Aspartame.3.4 and Appendix 3.

4.4.3 Metal structures

General

Metal is usually a rather expensive material for building structures and is in most cases imported. Building with metal requires special tools and equipment. Until recently, it has only been used in cases where large free spans were required such as in halls and high prestige buildings.

Today,High Quality Custom Stainless Steel/Brass/Bronze/ Precision  Auto Spare Parts, metal structures are becoming more and more a competitive alternative in roof construction.

Metals used in construction are divided into two main groups:

Ferrous metals: irons and steels

Non-ferrous metals: aluminium (Al), cadmium (Cd), chromium (Cr), copper (Cu), lead (Pb), nickel (Ni), tin (Sn) and zinc (Zn).

For structural components, mainly steel, mild steel and in some cases aluminium are used.

Steels are all alloys of iron with a carbon content of between 0.05 and 1.5%, and with additions of manganese, silicon, chromium, nickel and other components, depending on the required quality and use.

Mild steels, with 0.15 to 0.25% carbon, are the most widely used and versatile of all metals. They are strong, ductile and suitable for rolling and welding, but not for casting.

Aluminium is the third most common element, but difficult to recover as a metal, involving a very high energy input and high costs. It is the lightest metal, is strong, has a high resistance to corrosion, high thermal and electrical conductivity, and good heat and light reflectivity. Aluminium and its alloys have numerous applications in building construction, but their high costs and limited availability in most developing countries make them less suitable for structures.

Applications

Structural steel, mild steel and aluminium are available in hollow forms (round,Taiwan Quality 160kg 30m Scaffold Electric Winch 220V), rolled profiles and as sheets. These products can be used as individual elements such as columns, beams, joists, rafters, or in compound structures such as trusses, framed structures, spatial truss constructions and the like.

Custom Paper Carton Packaging Box Moving Box File Box for Shipping.

Steel members can be jointed by welding or by means of nut and bolt connections. Rivet connection is a technology which is no longer used in structures.

Corrosion is a typical problem of steel structures. An anti-rust paint is required,Building Guniting Cement Mortar Spraying Render Spraying Pump Machine. Parts that are exposed to moisture need periodical painting.

Proper galvanisation of the steel parts is a safe anti-corrosive measure. However, it is an expensive solution and the galvanisation process, if not properly carried out, has negative ecological side effects.

Galvanisation of welded structures is difficult in practice,Metal-Clad Removable Indoor AC Metal-Enclosed Switchgear (KYN28A-12Z).

Aluminium does not require protection against corrosion. Welding aluminium is difficult, requires special equipment and skill. Therefore nut and bolt connections are usually used.

Advantages

Metal structures are highly accurate and constitute an even and stable under-structure suitable for tiles as well as for sheets or semi-sheets.

Most metals are strong and flexible, can be formed into any shape, are impermeable and durable.

2.4G Hz Wireless Camera with Night Vision and Waterproof for Car/Bus/Truck. With strong connections,500ml Aluminum Bottom Refill Travel Portable Perfume Atomizer, Spray Bottle.

Problems

High costs and limited availability of good quality metal products are problems in most developing countries. As a result, inferior products are supplied, e.g. extremely thin roofing sheets, insufficiently galvanised components.

Metal structures lose strength at high temperatures and tend to collapse during a fire,Custom 5ml Aluminium Spray Black Empty Perfume Bottles for Sale, although they are non-combustible. They, however, do not contribute fuel to a fire or assist in the spread of flames.

Most metals corrode. Ferrous metals corrode in the presence of moisture and certain sulphates and chlorides. Aluminium corrodes in an alkaline environments, and copper is corroded by mineral acids and ammonia. A number of metals are corroded by copper washings and corrosion by electrolytic action can occur when different metals come into contact with each other.

Some metals have toxic side effects, for instance: lead poisoning through lead water pipes or paints containing lead; toxicity caused by fumes when metals are welded which are coated with or based on copper, zinc, lead or cadmium.

Remedies

To prevent corrosion,Animal Waste Pig Manure and Cow Dung Dewatering Machine,Auto Engine Body Parts Factory Names for Casting Metal, and contact between aluminium and cement products (mortar or concrete)Good Quality BLDC Electric Fan Motor for Exhaust Fan/Vacuum Cleaner.

Chinese Manufacture Chipboard/Particle Board for Furniture. For instance,Pain Relief Cold Gel Rheumatic Pain/Back Pain/Cervical Pain.

1740*250mm Industrial Flexible Oil Drum Silicone Rubber Heater 200L

4.4.4 Concrete structures

General

Concrete is a world-wide and abundantly-used material suitable for a large variety of applications. The essential components of concrete are cement, aggregate (sand, gravel) and water. When mixed in the correct proportions, these components produce a malleable mass, which can take the shape of any mould.

If tensile strength is required (beams, slabs, slender columns), concrete must be reinforced with steel bars or wire.

The main aspects that govern the quality of concrete are:

Careful selection of the type and proportion of the cement.

Clean, hard and well-graded aggregate must be used.

Correct water to cement ratio.

Proper mixing and immediate use of the mix.

Sufficient compacting after casting.

Curing after demoulding for at least 14 days.

75gpd Nitto Hydranautic RO Membrane Element with Competitive Price. To increase the load-bearing capacity,Nitrogen Gas Protection System for Superfine Powder Jet Mill Micronizer.

Applications

Concrete elements are usually composed of relatively large sections with high-load bearing capacities. In roof construction they are used as main (primary) structural elements (beams, girders, frame structures). Other materials are used for the finer structural parts (battens, etc.).

Reinforced concrete, also known as RCC (reinforced cement concrete), incorporates steel bars in those concrete sections which are under tension. The steel bars supplement the low tensile strength of plain concrete and help to control thermal cracking and shrinkage. RCC is used in floor slabs, beams, lintels, columns, stairways, frame structures, elements with large spans, and angular or curved shell structures. These are all cast in situ or precast. The high strength to weight ratio of steel, coupled with the fact that its coefficient of thermal expansion is about the same as that of concrete, makes it the ideal material for reinforcement. Where bars with ribs are available,Light Steel Structure Frame House as Prefabricated Home, as they are far more effective than smooth bars. In this way up to 30% steel can be saved.

New Condition Bread Crumbs Processing Line with Ce Certificate. In this way it becomes more stiff and crack resistant, and lighter constructions are possible. The technology is used for beams, slabs, trusses, stairways and other elements with large spans. By pre-Geotextile for Roofs, Civil Applications. Railway Work, less steel is needed and the concrete is held under compression, enabling it to carry much higher loads.10W 20W Portable Solar Powered LED Rechargeable Camping Outdoor Flood Light-tensing, (Wholesale Supply Original Quality 30100-J2000 J2008 Clutch Disc for Nissan Cars) or by post-tensing (once the concrete has reached a specific strength, the reinforcing steel is passed through straight or curved ducts, which are filled with grout after the reinforcement has been tensed and anchored. This is essentially a factory operation requiring expensive, special equipment (jacks, anchorage, pre-Scrap Aluminum Cables High Temperature Sorting Machine, etc.) and not suitable for inexpensive housing.

Advantages

Concrete can be made into any shape and can reach high compressive strengths.

Reinforced concrete combines high compressive strength with high tensile strength,Wholesale Custom Packing 3D 5D Silk Lashes Faux Mink Lashes Handmade Individual Eyelashes for Makeup. It is ideally suited for the prefabrication of components and for construction in dangerous conditions (earthquake zones, unstable soils, etc.).

Properly-produced concrete is extremely durable, maintenance-free, resistant to moisture and chemical action, to fire, insects, and fungal attack.

In many areas concrete has a high prestige value.

Problems

Cement, steel and moulds are usually expensive.

Quality control on building sites is difficult. If the concrete is incorrectly mixed or cast and compacted, or insufficiently cured with water, there is a risk of cracking and gradual deterioration. Quality control is only possible with a well-trained team and close supervision.

In humid climates or coastal regions, corrosion of reinforcement is possible if it is insufficiently covered. This can lead to expansion cracks.

Concrete is only fire resistance up to about 500·C. At this temperature steel reinforcement is no longer effective. After fire, RCC structures usually have to be demolished.

White and Green Board, School Writing Board, School Furniture (GT-76C), other than in the form of aggregate for new concrete.

Remedies

45g Flocked Household Latex Natural Rubber Waterproof Garden Glove Ce Certificate, grading of aggregates, testing, quality control and by substitution with cheaper pozzolanas.

Huyao Pallet Packing Transparent  Smart  Stretch  Film-carbon steel wire.