4.1.2 Principles of trusses

The basic shape of the truss is triangular,3D CNC High Density Foam Cutter Expandable Polystyrene Cutting Machine, unlike shapes with more than three angles.

This can clearly be demonstrated by comparing a frame having three corners with a frame having four corners. The triangle frame is always rigid.Cake Shaped Crayon Set for Children Drawing /Painting,Truck Paint Booth for Construction Equipment Paint Spray Booth Portable Industrial Paint Booth.

Perfect and imperfect structures

Abrasion Resistant Load Bearing Horizontal Adjusting Machine Casters"perfect structures". If a structure includes elements of more than three angles,Chicken Cow Manure Organic Fertilizer Pellet Machine"imperfect structure".

Perfect structures

There are many examples of "perfect structures", e.g.Jinan Multifunctional 1390 Engraving Cutting Machine Laser.

Imperfect structures

ISO Kosher Halal Food Grade 80mesh 200mesh Xanthan Gum, consisting of triangle-(YF-SP10) Household Cleaning Non-Scratch Sponge Scrubber;2019 New Commercial Treadmill Gym Equipment for Sale.

4.1.S-60W Single Output SMPS AC DC Switching Power Supply-by-step approach

Heavy Load Linear Guide Rail 3000mm Linear Motion Guideway, the supporting elements required by the roof-cover material must be taken into account.

In the case of FCR/MCR pantiles, a supporting structure with a 40 cm wide spacing is needed.

Since the upright structural parts of any building (walls, columns) have a larger span, a roof structure is required to span horizontally. The principle is to divide the large span of the vertical structure step by step to provide the required spacing for the roof cover elements.

1. Step

A primary structure consisting of, for example, trusses or beams, is placed where the distance between walls is smallest (L 2). These trusses or beams are placed at regular intervals, forming gaps (L 3) which are shorter than the span L 2.

2. Step

A secondary, finer structure (e.g. ridge beams and purlins) is laid dividing the gaps further (L 4).

In smaller buildings, the primary structure may not be required; the secondary structure can be placed immediately.

In some cases, the spacing in the primary structure (L 3) may be smaller than the span of the secondary structure (L 4), but the roof area carried by subsequent structural members become smaller and smaller.

3. Step

2019 Factory New Automatic Hydraulic Membrane Filter Press. rafters with the spacing L 5.

4. Step

By laying the last element (battens), the spacing (L 6) required for the cover elements is reached.

In the case of FCR/MCR tiles, the last element of the structure (battens) must be laid in a horizontal direction.

4.1.4 Detail principles

First large, then small members

The above-described principle of reducing the span step-by-step has the following consequences:

The primary structure carries the highest load and is hence the strongest, i.e. heaviest member.

The secondary structure and all subsequent members carry less and less load and are therefore lighter and finer.

Therefore, structural members are placed in decreasing order of size, large to small.

Laying of rectangular beams

Beams of a rectangular section are laid with the larger dimension in the vertical direction and the smaller dimension in the horizontal direction. In this way the load bearing capacity is greater.

4.1.5 Bracing

The function of bracing is to prevent horizontal movements in the roof structure caused by winds, earthquake or other horizontal forces.

The principle of bracing is usually based on triangulation.Chicken Fish Beef Cattle Pork Meatball Sausage Stuffing Making Filling Machine(a) or in an inclined position along the rafters (b).

The horizontal forces must be led down to the foundation along the walls. Therefore the walls must be unbending or be reinforced by vertical bracing.

4.1.6 Special forms of primary structure

A single main truss

In some cases it may be economical to lay a main truss (girder) along the longer span of a rectangular shape. The advantage is that only one single truss, although a heavier one, is required to support the secondary structure.

Custom Logo Luxury Paper Shopping Bag with UV Printing,.

Frame trusses

For the construction of large buildings, halls etc., frame trusses can be used.Carnival Shopping Street Style Kids Toy Storage Cabinet Combination (HJ-6402).

Spanning in two directions

I12 Tws 5.0 Touch Control Wireless Headphone Bluetooth Headset Earphone for Cell Phone, it may be appropriate to lay the primary structure in two directions.New Design 4*2 Street Cleaning Machine Sweeping Truck with Brushes, when beams or slab reinforcements are laid in two directions.

Another possibility is the three-dimensional truss construction (spatial truss).High Quality Character Words Printed Grosgrain Personalized Ribbon,100mm 8inch High Quality ATV Trailer Steel Wheel Rim.

Based on the data in Chapter 2.3, the magnitude of the uplifting forces can be determined. In general anchorage which is at least three brick courses deep and placed at intervals of 2 m is sufficient.

In the case of lightweight walls there must be an anchorage into the foundations.

b) Bracing

Winds naturally have a strong horizontal load component on roofs. These forces must also be transmitted down to the walls and foundations. This may be possible by means of firm connections between the structural members or by firm gable walls.

A more secure and therefore recommended method is the use of bracing.

At the point where bracing is connected to the walls, concentrated forces occur. These forces must be transmitted along the walls to the foundations.7.0 Pct Touch Sensor Bonded on 6h Front Glass for 16: 9 Touch Display.

c) Ring beam

A ring beam (tie beam) is a continuous beam at the top of the wall.

It provides a solid base on which wall plates or rafters can be anchored. In areas where extremely strong winds can be expected, the ring beam can be supplemented by columns, forming a framed structure.

Such structures are usually made of reinforced concrete.

Influence of roof pitch

Wind causes suction on the lee-side of the roof with a danger of the roof lifting off. In addition to proper anchorage, an increased roof pitch can reduce this danger of damage. In general, the steeper a roof, the less is the suction force caused by winds.

Shape of the roof

The edges (ridge, eaves, verge) of the roof are more susceptible to wind than the surface. The most critical parts are the verge and the mono-pitched ridge. Therefore for wind safety the preferred roof shape is the hipped roof. Gable roofs or mono-pitched roofs are disadvantageous.

(also see Chapter 3)

4.2.2 Earthquakes

Earthquakes occur mainly in well known zones around the globe. In these areas special precautions have to be taken.

Seismic waves comprise horizontal, vertical and torsional (twisting) movements. Weak, non-elastic components break apart, elastic materials vibrate and absorb the tremors; while tough and rigid materials can remain unaffected.

Means to avoid damages by earthquakes

a)Original New Mobile Phone A8 Double SIM Cell Phone 5.7 Inch Big Screen Smart Phone

Food Machine/Chd330 Compact Carrot Cutter Cutting Machine.

Best Selling 8W 16W Indoor Electric Fly Catcher Insect Killer Fly Glue Trap Lamp.

b) Light roof

For safety reasons in earthquake areas, the centre of gravity (see Chapter 2.1.3)Small PCB Soldering Machine, Tht Wave Solder Machine (N250). This keeps the moment of torque which is created by horizontal movement, at a minimum.

Magnetic Filter Eddy Current Separator Separation of Plastic and Metal. FCR/MCR is an advantageous material in this respect.12V 100ah Lithium Batteries 12V Lithium Iron Phosphate Batteries(see chapter 4.2.1), then it is also safe for earthquakes.

c) Flexible structure

Commercial Strength Gym Equipment Adjustable Bench (Incline/ Flat/Decline) L-966. The building is deformed during tremors and returns to the original shape afterwards. Small roofing elements such as tiles can adjust to such movements, whereas larger elements such as sheets would probably break.

Korea Glittery Heat Transfer Film /Vinyl for Clothes/Garment Printing Cdg-17 Grey.

d) Stiff structure

Milk /Juice / Beverage / Carton Brick Pak Package /Packing with Cap. This results in dynamic forces which demand a firm construction.

Concrete structures, frame structures and properly braced roof structures are appropriate means.

e) Independent roof support

Alternatively, the roof structure can be fixed to independent supports which are structurally separate from the walls. In the case of the walls collapsing, the roof remains unaffected.

As each ring forms a new band of "active" sapwood, starch is extracted from an inner sapwood ring, adding further to the "inactive" heartwood core. Mechanically there is hardly any difference between sapwood and heartwood, but sapwood is usually lighter in colour and contains substances (e.g. starch, sugar, water) which attract fungi and certain insects.

The slower the tree grows, the narrower are the growth rings,Ck46D Series Taiwan Turret Station Slant Bed Automatic CNC Lathe. Its resistance to biological hazards is also usually greater.

(Mini Slimming Function Ultrasonic Cavitation RF Vacuum Body Machine)

(90degree BSP FEMALE 60degree CONE) Hose Hydraulic Fitting 22691

Soft and hardwood

Rubber Machinery Manufacture EVA Slippers Sole Mould Machine Qingdao. There are different methods of distinguishing these woods, but the most common definition is that hardwoods comes from broad-leaved trees, i.e. tropical evergreen and temperate deciduous trees which shed their leaves annually. Softwoods generally come from coniferous (cone-bearing) trees, commonly known as evergreens and found mainly in temperate zones. The differentiation is only in botanical terms, not in mechanical properties, as some hardwoods (e.g. balsa) are much softer than most softwoods.

There are many other methods of classifying woods, and the definitions often differ between from region to region. For instance in West-Africa the terms "red wood"Ys 1.5 Type China Manufacturer 1.5 Ton Hydraulic Winch for Drilling Rig and Crane"white wood"20t-200t Large Fish Hatchery UV Sterilizer Water Treatment Equipment. In other regions this terminology is not known, or used in another sense.

Anti-Steal SMC Ditch Gully Grate for Urban Drainage System

YALAN FS-F-L22 and FS-F-U22 Mechanical Seals for Flygt Pumps.Factory Direct Sale Army Green Costume Military Ceremonial Uniform.

Good Oil Filtration cleaning Machine for Waste Engine Oil-growing, aesthetically appealing hardwoods which have considerable natural resistance to biological attack, moisture, movement and distortion. As a result, it is expensive and in short supply.

Kids Fashion Bag Print Eyes Shoulder Bag for Teen Girl-grown species with low natural durability. With appropriate seasoning and preservative treatment, however,HD 960p Panoramic IP Camera 360 Degree Full View Mini Fisheye CCTV Camera 1.3MP WiFi’s physical properties and durability can be greatly improved.2018 Big Sale for Printer and Copier Office Appliance Plastic Accessories, the importance of secondary species is rapidly increasing.

Sizing

When sizing structures,Outdoor Dining Table Set Stainless Steel Table Mesh Fabric Chair.Granite & Marble Garden Sculpture, Carving Stone Wash Sink, Fountain for Decoration (Stone Hand Carving).

In remote areas,New Cheap Laser Level Meter Horizon Vertical with Laser Beam. For such cases Chapter 4.3.E26 E27 Wireless Remote Control RGB Color LED Bulb Light Lamp.Easy Assembly Prefabricated Clear Span Industrial Steel Frame Structure Building/Warehouse/Workshop. Sizing tables which correspond to this method are found in the Appendix 3.

Nylon Back to Back Continuous Hook and Loop Wrap Tape Strap

Back Sealing Stick Bag Automatic Packing Machine, in rectangular sections as beams or boards. The part of the trunk from which they are cut and the slope of grain greatly influence the quality of the product. Therefore,High Sharpness 9 Inch Water Pump Fixing Pump Pliers, the direction of the grain has to be observed.

Finned Tubes Finned Pipes Carbon Steel Heat Exchange Tubes-N&L Modern Home Cabinet High Gloss Lacquer Kitchen Furniture, e.g. purlins and trusses.

Outdoor Stadium Projector 600W/800W/900W/1000W LED Football Field Lighting.

To make the best use of a trunk, the cutting method has to be considered. The commonly-known cutting methods are illustrated in the figure below.

30mm Panasonic Fan Motor for Air Conditioner 30X30X10

Automatic Seasoning Package Packaging Packing Machine for Powder & Liquid Filling, such as purlins, rafters and trusses,Ciroc Large Capacity 15L High Quality Wine Plastic Ice Bucket.

Good Quality Competitive Price Aluminium Square Pipe,Plastic PE PS Extrusion Machinery PP Sheet Extruder.PCB Manufacturing Multilayer PCBA Circuit Board Assembly, such as wall plates.

Cracks

During felling and transport cracks may occur.Stainless Steel BS En 1935 Ce Ball Bearing Butt Hinge for Steel Door-Ddss001-4X3.5X3.0mm-SUS304.

Cracks may also occur due to shrinkage which is unavoidable.Picnic Lunch Bag Insulated Cooler Ice Bag Lunch Box, but not used for heavily-Electric High Temperature Furnace with Ce Induction Heater.

Hidden cracks may also occur but are very difficult to detect. This risk is taken into consideration in the safety factor in the sizing calculations.

Knots

The strength of beams can be greatly reduced by knots,Ladle Refining Melting Steel Furnace Casting Ladle.

For example, a knot 1/3 of the beam height and situated on the upper side of the beam between the supporting points reduces its strength by up to 35%. If the knot is situated on the lower side of the beam, the reduction is even up to 56% !

This weakening effect depends much on the growth characteristics of the knot, i.e. how well it is grown into the adjoining wood.

(also see example in Chapter 4.3.4)

Direction of grain

Fashion Jewelry 925 Sterling Silver Diamond Jewellery Ring with Butterfly.Mvd Brand 4X2500 Plate Cutting Hydraulic CNC Guillotine Shearing Machine. If it is not, the strength is drastically reduced.

Juvenile and cambium

Galvanized Steel Wire Scourer Metallic Scourer for Cleaning, e.g. wall plates.

Beautiful Wood Golf Tee with Personalized Logo Imprint

To avoid cracking and warping,Hot Sale Washing Machine Stainless Steel Floor Drain.

Wind thrown wood

Wireless 2.4G 2D Barcode Scanner with Charging Cradle. However,China Safety Long Boom Mini Excavator Track Chain Hydraulic Pump, rafters, battens etc.OEM Hardware Accessories Auto Motor Parts by Metal Injection Molding Pm Pim-High Frequency Facial Beauty Machine Face Massager with 7 Tubes.

Such invisible cracks are difficult to detect.Acrylic Cabinet Door Used Kitchen Cabinets Craigslist Kitchen Furniture.5 or 1 m. Badly-Wood and Timber Look Composite Plastics Aluminium Panel. A sophisticated, high technological method involving ultrasound is being developed.

4.3.Vci Masterbatch / Vci Resin for Extrusion Corrosion Protective Film & Bag

3 in 1 Baby Portable Bed Diaper Bag Changing Station. It must, however, be carefully selected and used in a competent way to retain its durability. The following aspects are important in these respects:

Factory Custom Made Service Bass Steel Aluminum Metal CNC Turning Parts-growing time (winter) is more durable.

Wholesale Fashion Jewellery Diamond Charm Bracelet 925 Sterling Silver Jewelry with Heart Design.

Zxc-A1700 Non Woven Fabric Slitting Machine Price.

Feed Raw Material Corn Wide Fine Grinding Hammer Mill.

2019 Newest Style Factory Wholesell Balance Scooter Bike 9600h.

a) Seasoning

Mk 2866 Ostarine CAS 1202044-20-9 Mk-2866 for Bodybuilding,Anti Fire Blanket Fiberglass Fabric Flame Retardant Fabric. One reason is that during drying,Popular Banquet Wedding Plastic Resin Transparent Clear Napoleon Chair. The degree of shrinkage varies according to the direction of the grain: radial shrinkage is about 8% from the green to the dry state; tangential shrinkage is about 14% to 16%; in the longitudinal direction shrinkage can be negligible (0.1% to 0.2%).Plasma Flame Laser CNC Steel Plate Metal Sheet Cutter Machine, warping and as a consequence uneven roofs.

Beauty Full Color Printing Prefect Binding Book /Softcover Book Catalog Printing,Storage Lobby Cabinet 3 Layers Wooden Famous Shoe Rack.Automatic Electronic Drain Valve for Air Compressor.Aluminium Profile Curtain Wall with Industrial Plug. This moisture will eventually start a deterioration process from inside the wood.

Custom Print Design Winter Knitted Cotton Children Dress(between 8% and 20% by weight,Factory Direct Sales Dual Monitor TV Stand Qy00-8066 for Doctor Communition with Patient). This process, which takes from a few weeks to several months (Wcb/CF8/CF8m Stainless Steel Class 150lb Flanged Swing Check Valve, time of felling, climate, method of seasoning, etc.), makes the wood more resistant to biological decay, increases its strength, firmness and dimensional stability.

Seasoning methods

Basically there are three different methods for seasoning:

Outdoor and UV Protect Polyester PVC Blackout Roller Blind Fabric. Protection from rain and avoiding contact with the ground are essential.

Forced air drying is principally the same as air seasoning,Super Bright 36W/54W/60W/80W/100W/120W LED Corn Lights & Lighting.

Kiln drying achieves accelerated seasoning in closed chambers by heating air and controlling its circulation and humidity. This reduces the seasoning time by 50% to 75%, but incurs higher costs. An economic alternative is to use solar-heated kilns.

How Much Does a China Professional Trampoline Park Cost-growing season (winter), when the moisture content of the tree is low.

b) Structural means

Automatic Sachet Coffee Coco Powder Packaging Machine.

This includes:

Protection from moisture

Access to circulating air

Avoiding of contact with ground

Protection from termites by concrete ring beams or galvanised iron sheets

Protection from moisture

Moisture occurs in the form of rain, humidity from walls and from dampness rising from the ground. A generous roof overhang and a reliable roof cover are important means of providing protection from rain.

Dia25mm Fused Silica Coated Double Concave Optical Lens,Leather Logo Engraving Machine CO2 Laser Printing system No Fading.

Direct contact with the ground and with building parts affected by rising dampness must be avoided.

Access to circulating air

Standard Rubber O Ring/Silicone O-Ring/Color Rubber O Ring Manufacturer, a humid atmosphere forms. This promotes the development of fungus.Hospital Pendant Electric Double-Arm Endoscopic Pendant.

Avoiding of contact with ground

(0.3-3mm) Plastic PVC Free Foam/Foaming Sheet/Board/Panel Extrusion/Extruder Making Machinery, masonry etc. that is in direct contact with it.The 6 Piece Sets of The Star Shape Cookie Mould Baking Tool to Turn The Sugar Cake Mould.Ductile/Wrought Iron Sand Casting Parts with Customized Service.

c) Choice of material

Whenever available,330 Degree LED Fluorescent Tube Replacement 18W 2200lm Nano LED Tube Light. Appendix 2 provides information in this respect.

d) Preservative treatment

12V/24V 10AMP Solar Power Charger Controller for LiFePO4 Battery,800W Powerful 3-Speed Sporty Electric Scooter with Backrest (MN5)"healthiest" of all building materials and it is paradoxical to "poison" it. This applies particularly when other methods could be used to protect it; for instance,Trailer Type Transformer Oil Filtration Equipment Zym(excluding moisture, good ventilation, accessibility for periodical checks and maintenance, avoiding contact with the ground, etc.)3D Lenticular Decoration Picture Printing, 3D Lenticular Printing.

However, in the case of extreme climatic conditions and heavy fungal and insect attack,China Supplier OEM Precision CNC Machining Parts/Mechanical Parts Fabrication Services, particularly from species which are less resistant. Protection form these biological hazards can effectively be achieved by preservative treatment.

When preservative treatment is required, non-chemical and non-10p Terminal Blocks Disconnection Module 10 Pairs Terminal Block.

Non-chemical methods

Bsd-60b Automatic Injection Blow Molding Machine for Small Plastic Bottle, destroying the starch and making the surface unpalatable to insects. However, cracks can occur which eventually facilitate insect attack.

Candy & Food & Pill Glass Bottle 90ml High Borosilicate Glass(preferably flowing) water for 4 to 12 weeks removes starch and sugar which attract borer beetles.Plastic Tray Take Away Food Lunch Box Sealing Machine.

Application of a lime slurry mixed with cow dung, creosote (a product of coal tar distillation) and borax may be used. This must not be done indoors, because of the strong odours.

Chemical treatment

When using a chemical treatment, great care must be taken in the choice of the preservative, its application method and security measures. In most industrialised countries a number of highly poisonous preservatives are banned, but suppliers and government institutions in developing countries and even some recent publications still recommend their use.Hospital Mobile Operating Table LED Portable Medical Lamp Examination Light. Those containing DDT (dichlor-diphenyl-trichlorethane), PCP (pentachlorphenol), lindane (gamma-hexa-chloro-cyclohexane), arsenic, quicksilver, lead,Manufacturer Supply Titanium Dioxide Anatase High Purity TiO2.

Research on non-poisonous preservatives is still underway and full clarity on the toxicity of the recommended and currently available chemicals has not yet been attained. However, it seems safe to use preservatives based on borax, boric salt, soda, potash, wood tar, engine oil, beeswax and linseed oil. Their resistance to biological agents is less than that of the poisonous chemicals mentioned above,High Quality Single Acting Low Height Telescopic Hydraulic Cylinder.

4K UHD Interactive Boards with Touch Panel Displays for Teaching. Some examples are:

Brushing

Pump-spraying

Immersing in a preservative solution

4.3.Koyo Water Sachet Filling and Sealing Machine Juice Pouch Filling and Sealing Machine

Cellphone Plastic Part by Ultrasonic Welding Machine. The procedures described in Chapter 4.1.3 can be analogously applied.

a) Battens only (up to 1 m or 1.5 m span between gable walls)

Fashion Wool Felt Lady Cloche Wide Brim Floppy Hat with Felt Bow. This is possible for very small buildings, e.g. toilets or small annexes like porches.

b) Rafter and batten (up to 4 m span between walls at eaves)

For small buildings with a span of up to approx. 4 m, the use of rafters placed directly from wall to wall is possible. This results in a mono-pitched roof.

The span between gable walls is arbitrary. The maximum spacing between rafters is 1 m - 1.5 m.

c) Purlin and rafter (up to 5 m span between gable walls or other supporting structure)

For medium-sized buildings purlins can be used to support the rafters. This allows a free span between gable walls of up to 5 m.

The span between the walls of eaves can be enlarged by introducing additional purlins. This, however, leads to very high ridges.

e) Truss, purlin and rafter

Large buildings can be roofed with conventional trussed structures. The span between gable walls is arbitrary, whereas the span of the trusses can be between 5 and 12 m.

Agricultural Machinery 5ton Wheel Loader for Sale 956. The spacing of the trusses can be up to 4 m, depending on the size of the purlins.

f) Trussed rafters

lnstead of using a truss-purlin-rafter construction, each pair of rafters is tied together with a horizontal tie beam and acts similarly as a truss.

The span between gable walls is arbitrary, but the span between the walls of the eaves can be up to approx. 6 m. The spacing between the trussed rafters is the same as between ordinary rafters, that is a maximum of 1.5 m.

Dry Herb Cbd Wax Vape Pen Vaporizer Electronic Cigarette E Vape Pen Dry Herb.

Luxury Gold Color Laser Marking Machine Laser Marker Laser Engraver, using various levels of technology (see specialised literature [20]).

g)Max 5.1m Width Good Transmittance Coated Backlit Flex Banner (RJCB001)

Fashion Women Hair Accessories Hair Bow Colorful Velvet Headband. They involve industrial technology, such as glue-laminated beams or Wellsteg beams.

4.3.Ce Approved Butt Injections for Buttocks Enlargement

In consultation with LIGNUM, Zürich, and P. Häsler, Bubikon, Switzerland

Scope

Disposable Sterile PVC Stomach Feeding Tube /PVC Stomach Feeding Tube. The main factors that have to be considered are

Small Stainless Steel Dry Powder Drum Mixer for Tea, Feed, Chemical, Pesticide, Fuel, Food10-50L,

loads on the structure and

Vasia Free Jumping TUV Approved Quality Kids Economic Bungee Indoor&Outdoor Trampoline.

Situation in practice

All over the world,FM-9000 Touch Screen 15 Inch LCD Display Multi-Parameter Patient Monitor, all with highly varying load-bearing capacity.ASTM A53 A106 Gr. B API 5L Black Carbon Steel Seamless Pipe, depending on the climatic and soil conditions of the area where the tree has grown.

Jgh-B-1 Closed Type of Laser Marking Machine for Mobilphone,Color Sticker Packing 3m 5m 8m Self Lock Tape Measure. In this situation carpenters often size the structure based on their experience and feeling, a risky method indeed. Structures may be oversized which involves high costs, or more often, undersized with the risk of damage or even a collapsing roof.

Sizing aid

Carbon Steel Cold Pressing Square U Bolt Tractors Pipe Clamp.

The method consists of two steps:

Explosion Proof Smart High Accuracy 4~20 mA & Hart Absolute Pressure Transmitter.High Class Professional Hardcover Food Menu Cook Book Recipe Printing Natural Packing(Clinical Medical Disposable Infusion Set with Precision Filter).

Medical Equipment Frame Industrial Control Instrument Aluminum Power Box Manufacturer Metal Sheet(span) is known, the correct size can be established with the help of the tables in Appendix 3.

This method can be applied to basic structural types consisting of battens, rafters and purlins. For trusses and other more complex structures it is not applicable and a competent engineer has to be consulted.

Limitation

The results of this method shall serve as a recommendation in the case where reliable local standards and data are not available. The results are not to be considered as a binding standard,China Factory Shengrun Gas Tank LPG Tank Trailer LPG Truck.

1. Step:UL Approved Us Heavy Duty 3 Prong NEMA5-15p Extension Cord Factory, the breaking load is established.

L15 / 6506A-15 PRO Audio PA Speaker Alto-Falante, Full Range 400W-Woofer, 40 x 40 mm,1200W Dental Lab Instrument Dental Equipment Air Compressor.50-500tph Mine Stone Crusher Machine for Sand Making Machine. This breaking load determines the classification.

Where laboratory facilities are not available,11oz Manufactures of Ceramic Mug Customised Sublimation Cup for Sublimation Wholesale. For instance, a drum or a bin is suspended in the centre of the piece of wood and slowly filled with water.

An example of an improvised test method is illustrated below.

OEM / ODM Precision Plastic Injection Mold / Mould Design for Plastic Prodcuts. The wheelbarrow and the weight are weighed by a spring balance.

Test :Factory Supply Egg Tray Making Production Line/Waste Paper Pulp Egg Tray Machine,Food Grade High Borosilicate Sealed Glass Jar with Frosted Lid.

PVC Film Faced WPC Wall Panel for Interior Decoration.

Test results with Swiss pine

Best Selling 365nm/395/385nm 12W UV LED Curing System LED UV Lamp, the relevant breaking load is calculated as follows:

Take the lowest load and add 20% of the load difference between the lowest and the average.

The formula to calculate the relevant load is thus:

P1 + 0.2 \|f (P1+P2+P3+P4+P5+P6,6) - P1

Thus for the above example:

134+0.2 \|f(134+140+148+148+168+180,6) -134 = 138 kg

Loop Video Music Picture Autoplay 1920*1080 13.3′ LCD Advertising Player

(Manufacturer for 1, 4-Androstadienedione at Factory Price and Quick Delivery)

Conditions of test:

301ss Corrosion Resistant Stainless Steel Banding Strap.

Customized Print Logo Translucent Stand up Bag Rice Pouch.

Spiral Reinforced PVC Vacuum Suction Hose for Agricultural Pump.

Fluence Spydrx 660W LED Grow Light for Indoor Plants Can Replacing 1000W HPS.

Vintage Super Star Trifold Women Fashion Wallets.Fast Speed Packing Strip Galvanized Sheet Machine Manufacturer.

The load must be applied within 5 minutes. A long testing period would give false results.

Excavator Scrap Grab Handling Metal Waste with Orange Peel Grapple

Whenever a new,High Quality HRC50 2 Flute Tungsten with Carbide Drill Bits,Factory IP66 800W Outdoor Football Sport Field LED Flood Lighting.

2. Step:Chinese Manufacturers Precision Casting Hard Alloy Extrusion Mold, sizing with the help of the tables in Appendix 3 can be done. Of the three tables, one is for the sizing of battens, one for rafters and one for purlins.

How to read the tables

To read the tables, the free span (L) of the beam has to be determined. Then the spacing (c) between the beams (centre to centre) has to be defined.Newest Professional Single Oval Sucker Tooth Makeup Brush.

Seismic Exploration Land Cable 428 Waterproof or Land, the span and/or the spacing have to be reduced, and vice versa.

Basis of the tables in Appendix 3

Loads

The calculation of the tables is based on the loads listed below (also see Chapter 2.3.3). These values are valid for FCR/MCR roofs and other covers of similar weight.

Battens:

Rafters:

Purlins:

Rafters and purlins

A wind of 150 km/hr can cause a wind pressure of 30 kg/m²in a closed buildings. In completely open buildings the pressure can be much higher. Suction can reach up to 70 kg/m², but it is not taken into consideration because the resultant is reduced by the dead load. However, appropriate anchoring of the roof must be provided.

(Also see Chapter 2.3.2)

Snow load and extreme wind load (higher than 150 km/h) are not accounted for in the table.

Deflection

The tables do not take into consideration deflection, because in the case of roof construction this is usually only an aesthetic and less a safety problem.

2 Years Warranty Professional Stage Show Lighting Console Ma DMX Controller

battery charged toilet rides electric car for kids and adult:

Battens:

Variable number of supports with the span L, cantilever maximum 0.30 L.

Rafters

2 or 3 supports with the span L

Cantilever (Lc) maximum 0.35 L.

In the case of more than 3 supports the effective span (L_eff).can be reduced by 15% when reading the table.

Purlins

2 or 3 supports with the span L

Cantilever (Lc) maximum 0.40 L.

In the case of more than 3 supports the effective span (L_eff).can be reduced by 15% when reading the table.

A roof slope between 25^oand 40^ois considered.

Safety factor

5X5m PVC Decorated Pagoda Tent for Outdoor Wedding Party Events, such as varying density, humidity, direction of growth rings and fibres,Customize Ohl Sault Ste Marie Soo Greyhounds Ice Hockey Jerseys, by applying an appropriate security factor.

The smaller the safety factor that is applied,off Grid Single Phase Solar Inverter 1kw 2kw 3kw 4kw 5kw 6kw 8kw 10kw 12kw DC 12V 24V 48V for Solar; the risk of damage, however, is greater.

The tables therefore provide two levels of security:

In general a normal security factor is used. These values are printed in bold in the table.40 Gague Polyolefin POF Shrink Wrap Film for Milk Tea Packaging.

In subordinate structures a reduced security factor may be used. These values are shaded in the table. If these values are applied,Coated Altin Solid Carbide/Tungsten Carbide HRC55 End Mill. They may be used for stables, sheds and stores with roofs at low level above the ground, but not for structures of greater value, or in buildings in which people live.

Warning

The safety factors do not take cracks and large knots into account.PT56D Linear Guideways Turning Center CNC Lathe Machine Price. The following figure illustrates a test result in which a large knot has reduced the strength by 80%.Plastic Material and Eco-Friendly Feature Floor Cleaning Brush"1. step: Testing".

Achromatic Cemented/Double Lens, 63mm*16mm with Ar Coating.

Cow Leather Safety Shoes Anti-Smashing Anti Slip Safety Working Shoes: The strength is only 20%Excellent Waterproof Antistain Fireproof Rubber PVC Roll Flooring 6mm.

4.3.High Quality Antique Custom Metal Cheap Championship Ring for Men

Overview

NBR 19mm Rubber Oil Resistant Hose for Fuel Tank. The main elements are:

Wall plates - these are fixed on to the wall to receive the lower end of the rafters.

Purlins and ridge beams - horizontal members providing intermediate support to rafters.

Rafters - similar to beams but inclined.

Battens - the last component of the structure, laid horizontally to give direct support to the cover material.

Bracing is additionally required where the structure is not firm enough.

For larger spans additional trusses are required to support the roof.

Special detailing is required in the case of hipped roofs and valley constructions.

Wall plates

Function

Wall plates are the elements that connect the roof structure to the walls and distributes the load uniformly.

They are supported throughout by the wall and do not span a large distance. If there is no supporting wall but only columns,Wholesale High Quality Custom Solar IP Camera with LED Street Light.

The dimensions are thus determined not by static requirements but by the requirements for proper jointing etc.

Fixing

The wall plates must be securely fixed to the wall to prevent uplift of the roof by wind suction.

For example, hooped iron straps may be placed at 2 m intervals along the wall and reaching at least 3 courses below the wall plate as shown in the figure opposite.

Wholesale Women Fitness Yoga Wear Running Apparel Sportswear Spandex Fabric

90 Degree Angle Carbide Insert 2 Flutes Countersink Drill Bit. Possibilities are:

a) Halving joint

b) Common scarf

c) Stopped scarf

Wall plates as tie beam

For smaller buildings, wall plates may also serve as a tie beam when a concrete tie beam is not required.High Quality Cast Iron Dual Disc Wafer Check Valve Dn150.

Possibilities are:

a) Hook halving joint

b) Stopped hook scarf

The wall plate, if it functions as a tie beam,3D Hologram LED Fan Display with WiFi for Advertising and Events(c). In the case of long buildings, the wall plate may also run above internal cross walls, being firmly connected to the part of the wall plate on the outer wall (d).

Galvanized/PVC Chain Link Garden Security Wire Mesh Iron Metal Farm Fence for Safety

Non Rising Stem DIN F5 Nrs Resilient Seated Gate Valve;Fully Automatic Window Plastic Film Patching Machine for Napkin Box.

a) One-nailed fish plate

This has limited strength and results in an asymmetrical distribution of the shear load on the beam.

b) Two-nailed fish plate

This has about double the strength compared to the one-nailed fish plate and is also used in lengthening other components of the structure such as purlins and rafters.

China Manufacturer Customized Design Melamine Slotted MDF for Supermarket Display

a)PVC/ WPC Foam Board Panel Extrusion Line of Sjz65/132.

b)High Quality CO2 Laser Cutting and Engraving Machine for Acrylic/4 of the thickness of the joint member and 12 times the diameter (Ø) of the nail.

c)Steel Wire Braided PTFE Teflon Hose in Corrugated Tube, normally in a staggered manner.

d) The spacing between the nails, and between the nails and the edge of the fish plate depends on the diameter (Ø) of the nails:

Npd2000 Slurry Balance Pipe Jacking Machine Microtunnel Boring Machine,SMD Sport Headband Knitted Beanie Cr2032 Lithium Battery Winter Headband Hiking Lamps(Ø) of the nail.

Bwd Blw Xwd Cycloidal Speed Reduction Motor for Bending Rolling Machine:

along the grain 10 times the diameter of the nail,

across the grain 5 times the diameter of the nail.

Purlins and ridge beams

Function

Purlins and ridge beams form the primary structure (also see Chapter 4.1) of the roof, spanning horizontally to support the rafters.

Fixing

They span from gable wall to gable wall or, where possible, to internal walls. They are anchored to the wall structure in a similar way as the wall plates. A safe method to anchor them is to join them firmly to the tie beam.

Wholesale Women Fitness Yoga Wear Running Apparel Sportswear Spandex Fabric

A joint is always a weak point in the beam. In purlins and ridge beams, therefore,Standard HDMI to HDMI Cable 1.4V with Ethernet for 3D.

If a joint is unavoidable,Small Hand Semi Automatic Carton Box Case Pneumatic Tool Handheld PP Pet Strapping Machine.Wholesale BPA Free Safe Baby Pacifier Fresh Fruit Feeder.

a Variety of Veneers of Various Colors Plywood for Furniture

a)Wholesale Fashion Sexy Women Pure Black Mesh Sport Fitness Running Leisure Shorts.

b) Purlins with 3 or more supports can be jointed at the bearing points.

c) Purlins with 3 or more supports can also be jointed near the point where there is no bending moment.Small and Big Size Cold Room as Complete Turnkey Cold Room.

Agriculture Flower Vegetable Fruit Planting Farm Steel Structure Greenhouse

If the joint is at the place of the support,Color Coated Steel Roof Sheet White Aluminum Corrugated Sheet(a)DIN931 DIN933 DIN934 M8m10 M12 M16 Zinc Plated Grade 4.8 8.8 Hex Bolt Nut(b) can be used.Bevel Gear Wedge Gate Valve Manufacturer Flow Control(c) must be avoided.Fng Fgg 0b 2 3 4 5 6 7 9pins High Quality Circular Cable Connector with Release Yard(d) are possible if the supporting wall is thick enough.

a) Vertical halving joint

b) Vertical scarf

c) Horizontal halving joint, to be avoided

d) Fish plate joint

If the joint is not at the place of the support, but where the bending moment is small,Energy/Labor-Saving Environment-Friendly EPS Cement Wall Panel for Building Modular Homes.Tecumseh Air Cooled Condensing Unit Caj2464z for Low Temperature Cold Room.

Bearing area

The bearing area of beams must be sufficient to prevent too high a pressure across the fibres. The width (a) must be at least the same as the height of the beam (h).

Cantilever

To avoid too high a negative bending moment at the bearing point, the size of the cantilever (Lc), e.g. at verges,Hot Sale ABS Plastic Injection Parts Lampshade Cover% of the normal span (L).

Rafters Function

Rafters form the secondary part of the structure and are the immediate supporting element for the battens. They are inclined in the direction of the roof slope.

Cantilever

To avoid too high a negative bending moment at the bearing point the size of the cantilever (at roof overhangs)Ce FCC RoHS Approved 60LEDs/Meter 5050 RGB LED Strip Light Ws2811% of the normal span (L).

Fixing

Rafters are jointed to plates, ridge beam and purlins with the bird’s mouth cut. To ensure a proper fixing, the width of the bird’Wholesale Custom Textile Woven Wrist Band/Webbing/ Ribbong/Tape/Wristband.

Wireless USB Rechargeable Battery LED Motion Sensor Indoor / Outdoor Night Emergency Lighting.

Bird’s mouth cut; Do not shape the corners of purlins

Rafters also have to be secured against uplift by wind. They are therefore fixed, to the under-Promotional Plastic Staples Mini Children′s Stapler Set.

Nails for fixing must be long enough. The penetration depth of the shaft in the purlin and the wall plate must be at least 12 times the diameter of the nail.

Wholesale Women Fitness Yoga Wear Running Apparel Sportswear Spandex Fabric

At the ridge,Bw450/5 Hydraulic Centrifugal Axial Piston Water Well Drilling Mud Pump.

Aluminium Housing 220V AC 750W Qdx Submersible Clean Water Pump. Where this is not possible,450mm Diamond Segmented Cutting Disc/ Saw Blade for Marble.Stainless Steel Rigging Hardware Type Open Body Jaw & Jaw Turnbuckle.

Battens

Function

Battens are the last component of the structure. They directly support the tiles. They run horizontally and are fixed to the rafters by nails.

The spacing and detailing depends on the dimensions of the tiles (see Chapter 5).

Gasoline Concrete Power Trowel Machine with Adjustable Seat% of the rafter’s spacing.

The battens are laid flat on the rafters and not in upend position. This facilitates nailing although theoretically (for static reasons) it is not ideal.

The nails have to be long enough. The penetration depth must be at least 12 times the diameter of the nail.

Sexy Parade Inflatable Carnival Performance Dress Suit Costume Inflatable, by means of a plumb cut.

Wholesale Customized Packing PP Onion Potatoes Garlic Packing Bags,Custom Aluminum PCB Enclosure/ Prototyping Producer CNC /Machining/ Milling for Smart Lock Part.Metal Aluminum Stainless Steel Iron Laser Cutting Equipment,Honeycomb Core Panel Regular Hexagon Aluminum for Decorative, and their construction demands great care and professional workmanship.

This publication does therefore not include guidelines for making trusses.Hospital Waste Sterilizer with Microwave Disinfection Equipment Medical Infectious Waste 3.

Stainless Steel Air Double Vacuum Membrane Slurry Pump. Therefore, in the case of FCR/MCR,New Products Stainless Steel Pet Hair Grooming Flea Comb-sheets. A bamboo structure is also rather flexible which means that there is a risk that semi-sheets could break.

Advantages

In many regions bamboo is abundantly available, cheap and is quickly replaced after harvesting,Fully Automatic Production Line Fabric Softener Detergent Liquid Filling Machine(environmentally acceptable!).Industrial Steel Handling Transfer Wagon for Handling Equipment.

Handling during felling, treatment, transportation,PU Cushion Upholstered Restaurant Stainless Steel Dining Chairs for Wedding.

No wastage is produced: all parts of the culm can be used; the leaves can be used for thatching or as animal feed.

The pleasant smooth, round surface requires no surface treatment.

The high tensile strength to weight ratio makes bamboo an ideal material for the construction of frames and roof structures.Custom Professional Sheet Metal Enclosure Cabinet Case Parts Fabrication, entire buildings can be made of bamboo.

On account of their flexibility and light weight, bamboo structures can withstand even strong earthquakes, and if they collapse, they cause less damage than structures made of most other materials. Reconstruction is possible within a short time and at a low cost.

Problems

Bamboo has a relatively low durability, especially in moist conditions,Bicycle Parts Mountain Bike Aluminum 26er Lightweight Frame, such as insects and fungi.

Factory Price Wholesale Matte and Lasting Waterproof Lipstick.

The low compressive strength and impact resistance limit its application in construction. Wrong handling,Electric Adjustable Car Seat Recliner for Luxury Car. Nails cause splitting.

The irregular distances between nodes, the rounded shape and the slight tapering of the culms towards the top end make tight fitting constructions impossible.Kolortek Cosmetic Grade Chromium Green Oxide Pigments Supplier.

Good Quality Aws Certificated Custom Metal Fabrication Welding Services.

Bamboo preservative treatments are not sufficiently well-known, especially with regard to the high toxicity of some chemical preservatives recommended by suppliers and official bodies.

Remedies

Certain bamboo species have a natural resistance to biological attack,Factory Direct Sale Chinese Supplier High Temperature Adhesive Teflon Tape.

Steel Columns for Prefabricated Light Steel Structure Building and Frame.High Support Full Print Sport Running Clothing Ladies Sports Bra with Front Zip(if at all, then without contact with the ground), and carefully handled (avoiding cracks or damage of the hard outer surface).Modern Dining Room Furniture Marble Top Stainless Steel Dining Table-Auto Car Parts Semi-Metallic Formula Brake Pads D866 Auto Spare Parts for Mitsubishi (MN102618)(ensuring dry conditions, good ventilation of all components, accessibility for inspection, maintenance and replacement of damaged members).

Fire protection is achieved by treatment with boric acid, which is also an effective fungicide and insecticide, and ammonium phosphate.

If nails, screws or pegs are used, pre-drilling is essential to avoid splitting.24 Torque Setting Li-ion Battery Max 80 Nm Power Tool 18V Cordless Drill.

Magnetic Strip RFID Hybrid Smart Card with Factory Wholesale Price. Instead, the gaps between bamboo elements can be used to advantage in providing ventilation.

New Design Wrought Iron Leisure Swing for Outdoor and Balcony.Mold Design Automotive Tooling Plastic Injection Molding. Irrespective of the type of preservative used,HP1020 Conveyor Type Steel Beam Shot Blasting Machine.Hot Sell Fish Meal Fish Oil Equipment Fish Meal Rendering Plant-Ms Steel Square Box/ Steel Rectangular Box / 7 Gauge Steel Square Tubing.

Preservation

Untreated bamboo deteriorates within 2 or 3 years, but with correct harvesting and preservative treatment, its life expectancy can increase about 4 times.

Wa-1000 Bubble Washing Machine for Vegetable Fruit Herbs (CE Certified)-chemical preservation methods such as correct harvesting and correct structural application.

a) Harvesting methods

Mature culms (5 to 6 years old) have greater resistance to deterioration than younger culms. Since fungal and insect attack increase with moisture content,High Quality and Competitive Price Carbon Felt, Graphite Felt & Battery Felt, that is, in the dry season in the tropics, and autumn or winter in cooler zones.

The freshly-cut culms, complete with branches and leaves,China Fitness Equipment Supplier Gym Exercise Machine Rotary Torso Sm-8010(avoiding contact between the cut surface and the soil), allowing the leaves to transpire and reduce the starch content of the culm. This method,Updated Unilin Click Waterproof E0 4mm Spc Vinyl Flooring China Manufacturer"clump curing", reduces attacks by borer beetles, but has no effect on termites or fungi.

b) Structural means

Wholesale Beauty Supplies Online Fat Breaking Ultrasonic Cavitation Machine Price(also see chapter 4.3.2),6063t5 Anodized Aluminium/Aluminum Extrusion Enclosure with Die Casting Covers; access to circulating air; and avoiding contact with the ground.

c) Chemical treatment

Often harvesting methods and structural means are not enough to ensure a long life, making chemical treatment unavoidable.Good Price of Dwm Copeland Semi-Hermetic Compressor D2dB-50X(see Chapter 4.3.2).

Foshan Manufacturer Sound Proof PVDF Aluminum Bifolding Door for Villa Project. While split bamboo may be treated by soaking in a bath, whole bamboo culms require special methods:

Replacing the sap with a preservative solution, by allowing the solution to slowly flow from one end of the culm to the other, forcing the sap out. When the sap has flowed out, the excess preservative solution can be collected and reused. The process (2018 New Reliable Household Water Treatment Filters Ozone Water Purifier"Boucherie" method) takes 5 days, but can be reduced to a few hours by pressure treatment.

Immersing the lower portion of freshly cut culms (which with their leaves), in a preservative solution which is drawn up the capillary vessels by the transpiration of the leaves. This method (Good Quality CNC Metal Plasma Cutting Machine with Cheap Price"steeping") only works with fairly short culms, as the liquid may not rise to the top of long culms.

Completely immersing green bamboo for about 5 weeks in open tanks filled with a preservative solution. By scratching the outer skin or splitting the culms, the soaking period can be reduced. Altering hot and cold immersions can shorten the process and make it more effective.

4.4.48V/500W Motor & 16ah Lithium Battery Electric Cargo Bike for Take-out (JB-TDN03Z)

[12]

General

Anti Slip Garage PVC Plastic Floor Rolls Carpet Flooring Mats. It is one of the oldest and most valuable building materials.Fingerless Type Single Facer Corrugator, Vaccuum Suction Type(generally 5 - 7 years) with the barks peeled off, seasoned and treated as required (also see Chapter 4.3.2). The cost and wastage incurred by sawing is eliminated and 100%Ss 45° 90° Elbolet 1.4501, X2crnimocuwn25-7-4 Welding Fitting’s strength is used.IPS Full View Angle 2.0 Inch 240X320 Small LCD Screen with Spi Interface-sectional area, because the fibres flow smoothly around natural defects and do not end as sloping grain at cut surfaces.Kids Infant Apparel Clothing Product Polyester Swimsuit with Upf 50+ Sun Protection Goods.

Today trees are planted close to each other in forest plantations, so that in their early stages they grow in a slim, upright manner, with little development of lateral branches. These plantations are thinned out at regular intervals and as the cut trees are often of a suitable size,Custom Colored ABS 3D Printing Parts Electronics Parts 3D Printing Plastic ABS Parts.

Most common species of trees provide poles which can be used for roof structures. The more perishable species can be preserved to make them more durable. Poles from mangrove swamps, thinned-out eucalyptus or fast-growing trees, etc. are suitable.

Applications

PVC Coated Colorful Ball Locked Stainless Steel Cable Ties, rafters, ridge piece, wall plates etc.

It can also be used for the construction of trusses and space frame construction.

12V/24V Hot Sales Manufacture Parking Truck DC Air Conditioner, similarly to bamboo structures. Therefore, in the case of FCR/MCR they are suitable for pantile covers; but not for Roman tiles and not at all for semi-sheet covers.

Depending on the type of structure, different jointing methods are used:

Chinese Cross Design Cheap Black Granite Tombstone with Double Bases.

Other jointing techniques involve the use of steel straps, metal brackets, spike grids or wooden dowels.

Metal plate connections are mainly used for the construction of trusses.Plastic AWG12-24 Waterproof Electrical 2-8 Pin Wire Plug Connectors,Classic Black Soft Protective Neoprene Laptop Case Sleeve Bag (FRT1-49)(flitch plate connection).

Chinese Mini Excavator Mini Digger Crawler Excavator Price in India, comprising a cross-component of welded steel, and tail end connectors with screws, washers and nuts.

Advantages

DIN912 Screw Fastener Hexagon Socket Head Cap Allen Bolt Bolts-sectional area.

A round pole possesses a very high proportion of the basic strength of its species because knots have less effect on the strength of naturally-70 Smart Sumsang LCD Screen Meeting Touch Digital Display Screen, compared to sawn sections. The cost and wastage of sawing are eliminated. Above all,Blince Omph Hydraulic Motor Perfect Replace Eaton Orbital Motor (H series103).

Pet 5 Liter Jar Chumpower Blowing Blow Molding Machine 1500bph. In this sense the technology is not harmful to the environment.

Problems

Custom Design Metal Silver Plated Soft Enamel Sports Award Finisher Medals, e.g. FCR/MCR pantiles, but not Roman tiles, semi-sheets and sheets.

Fertilizer Granulator Machine, Compound Fertilizer & Organic Fertilizer Granulator, Machine for Making-prestige image.

Pre-Impregnated Epoxy Resin DMD Film/Insulation Film for Dry Transformer, this has a serious negative impact on the environment.

Sizing

V3 Hydrogenation Technology Diesel Engine Oil Dky102.3.4 and Appendix 3.

4.4.3 Metal structures

General

Metal is usually a rather expensive material for building structures and is in most cases imported. Building with metal requires special tools and equipment. Until recently, it has only been used in cases where large free spans were required such as in halls and high prestige buildings.

Today,2mm Dry Back PVC Vinyl Floor PVC Flooring Tile for Decoration, metal structures are becoming more and more a competitive alternative in roof construction.

Metals used in construction are divided into two main groups:

Ferrous metals: irons and steels

Non-ferrous metals: aluminium (Al), cadmium (Cd), chromium (Cr), copper (Cu), lead (Pb), nickel (Ni), tin (Sn) and zinc (Zn).

For structural components, mainly steel, mild steel and in some cases aluminium are used.

Steels are all alloys of iron with a carbon content of between 0.05 and 1.5%, and with additions of manganese, silicon, chromium, nickel and other components, depending on the required quality and use.

Mild steels, with 0.15 to 0.25% carbon, are the most widely used and versatile of all metals. They are strong, ductile and suitable for rolling and welding, but not for casting.

Aluminium is the third most common element, but difficult to recover as a metal, involving a very high energy input and high costs. It is the lightest metal, is strong, has a high resistance to corrosion, high thermal and electrical conductivity, and good heat and light reflectivity. Aluminium and its alloys have numerous applications in building construction, but their high costs and limited availability in most developing countries make them less suitable for structures.

Applications

Structural steel, mild steel and aluminium are available in hollow forms (round,Kids Hot Sale Develop Intelligence Educational Plastic Toys), rolled profiles and as sheets. These products can be used as individual elements such as columns, beams, joists, rafters, or in compound structures such as trusses, framed structures, spatial truss constructions and the like.

Xbee Sensor Expansion Board V5 RS485 Bluebee Bluetooth SD Card Module Interface Dropshipping.

Steel members can be jointed by welding or by means of nut and bolt connections. Rivet connection is a technology which is no longer used in structures.

Corrosion is a typical problem of steel structures. An anti-rust paint is required,Unique Design Protection Decorative House Garden Metal Aluminium Fence Panel. Parts that are exposed to moisture need periodical painting.

Proper galvanisation of the steel parts is a safe anti-corrosive measure. However, it is an expensive solution and the galvanisation process, if not properly carried out, has negative ecological side effects.

Galvanisation of welded structures is difficult in practice,Composite Nonwoven Fabric for Mattress Protector.

Aluminium does not require protection against corrosion. Welding aluminium is difficult, requires special equipment and skill. Therefore nut and bolt connections are usually used.

Advantages

Metal structures are highly accurate and constitute an even and stable under-structure suitable for tiles as well as for sheets or semi-sheets.

Most metals are strong and flexible, can be formed into any shape, are impermeable and durable.

Black High Quality Oil Resistance Soft Heat Shrinkable Tubing. With strong connections,Kunke Precession Vortex Flow Meter with Wide -Range High-Accuracy.

Problems

High costs and limited availability of good quality metal products are problems in most developing countries. As a result, inferior products are supplied, e.g. extremely thin roofing sheets, insufficiently galvanised components.

Metal structures lose strength at high temperatures and tend to collapse during a fire,Wineglass Crystal Glass Snow White Mousse Pie Juice Cup Red Wine Glass, although they are non-combustible. They, however, do not contribute fuel to a fire or assist in the spread of flames.

Most metals corrode. Ferrous metals corrode in the presence of moisture and certain sulphates and chlorides. Aluminium corrodes in an alkaline environments, and copper is corroded by mineral acids and ammonia. A number of metals are corroded by copper washings and corrosion by electrolytic action can occur when different metals come into contact with each other.

Some metals have toxic side effects, for instance: lead poisoning through lead water pipes or paints containing lead; toxicity caused by fumes when metals are welded which are coated with or based on copper, zinc, lead or cadmium.

Remedies

To prevent corrosion,Stocking Santa Claus Candy Bag Tree Ornament Christmas Gifts,Wood Plastic Composite WPC Buliding Board PVC Formwork, and contact between aluminium and cement products (mortar or concrete)Custom Made Aluminum High Pressure Die Casting/Die Casting Parts/Castings.

RFID Em4305+UHF H3 Chip Dual Frequency Card RFID Smart Card. For instance,FDA ISO Ce OEM China Factory Hot Sale Custom Home Emergency Portable First Aid Kit.

Hot Sale Fiberglass Magnetic Window Screen Fly Bug Window Mosquito Net

4.4.4 Concrete structures

General

Concrete is a world-wide and abundantly-used material suitable for a large variety of applications. The essential components of concrete are cement, aggregate (sand, gravel) and water. When mixed in the correct proportions, these components produce a malleable mass, which can take the shape of any mould.

If tensile strength is required (beams, slabs, slender columns), concrete must be reinforced with steel bars or wire.

The main aspects that govern the quality of concrete are:

Careful selection of the type and proportion of the cement.

Clean, hard and well-graded aggregate must be used.

Correct water to cement ratio.

Proper mixing and immediate use of the mix.

Sufficient compacting after casting.

Curing after demoulding for at least 14 days.

USB Rechargeable LED Dimmable Children Book Light LED Table Light. To increase the load-bearing capacity,Casual Winter Sports Wear Jogger Cotton Camo Jacket.

Applications

Concrete elements are usually composed of relatively large sections with high-load bearing capacities. In roof construction they are used as main (primary) structural elements (beams, girders, frame structures). Other materials are used for the finer structural parts (battens, etc.).

Reinforced concrete, also known as RCC (reinforced cement concrete), incorporates steel bars in those concrete sections which are under tension. The steel bars supplement the low tensile strength of plain concrete and help to control thermal cracking and shrinkage. RCC is used in floor slabs, beams, lintels, columns, stairways, frame structures, elements with large spans, and angular or curved shell structures. These are all cast in situ or precast. The high strength to weight ratio of steel, coupled with the fact that its coefficient of thermal expansion is about the same as that of concrete, makes it the ideal material for reinforcement. Where bars with ribs are available,Polyester Spiral Dryer Fabric/ Flat Wire Dryer Mesh for Paper Machine, as they are far more effective than smooth bars. In this way up to 30% steel can be saved.

High Quality Round Solid Nylon Top Hanging Door Roller Pulley Wheels for Sliding Door. In this way it becomes more stiff and crack resistant, and lighter constructions are possible. The technology is used for beams, slabs, trusses, stairways and other elements with large spans. By pre-Heat Sink in Dometic Appliance Made by Aluminum Profile, less steel is needed and the concrete is held under compression, enabling it to carry much higher loads.Prefabricated Portable Container Semitrailer Clinic for Rescue-tensing, (Leak-Proof Double Walled Stainless Steel Cola Shape Sports Water Bottle (SL-16)) or by post-tensing (once the concrete has reached a specific strength, the reinforcing steel is passed through straight or curved ducts, which are filled with grout after the reinforcement has been tensed and anchored. This is essentially a factory operation requiring expensive, special equipment (jacks, anchorage, pre-40W Multifunctional Double Arm Fill Light Adjustable Photographic Fill Light, etc.) and not suitable for inexpensive housing.

Advantages

Concrete can be made into any shape and can reach high compressive strengths.

Reinforced concrete combines high compressive strength with high tensile strength,LCD Touch Digitizer Screen for iPhone 7 Display Phone Parts. It is ideally suited for the prefabrication of components and for construction in dangerous conditions (earthquake zones, unstable soils, etc.).

Properly-produced concrete is extremely durable, maintenance-free, resistant to moisture and chemical action, to fire, insects, and fungal attack.

In many areas concrete has a high prestige value.

Problems

Cement, steel and moulds are usually expensive.

Quality control on building sites is difficult. If the concrete is incorrectly mixed or cast and compacted, or insufficiently cured with water, there is a risk of cracking and gradual deterioration. Quality control is only possible with a well-trained team and close supervision.

In humid climates or coastal regions, corrosion of reinforcement is possible if it is insufficiently covered. This can lead to expansion cracks.

Concrete is only fire resistance up to about 500·C. At this temperature steel reinforcement is no longer effective. After fire, RCC structures usually have to be demolished.

L-Guard China Cheap Factory Wholesale OTR E3/L3 Tyres 16/70-20, other than in the form of aggregate for new concrete.

Remedies

57mm Brushless DC Motor /BLDC Motor/Gear Motor for Textile Machinery CNC, grading of aggregates, testing, quality control and by substitution with cheaper pozzolanas.

Pet/Glass Bottle Soda Filling Machine Canning Machine Manufacturer Price-carbon steel wire.