4.1.2 Principles of trusses

The basic shape of the truss is triangular,Side Mount Swimming Pool Stainless Steel Sand Filter, unlike shapes with more than three angles.

This can clearly be demonstrated by comparing a frame having three corners with a frame having four corners. The triangle frame is always rigid.Hair Twist Sponge Hair Brush Twist Hair Sponge Barber Hair Brush Sponge,Price List of Cement Mixer Construction Mixing Machine.

Perfect and imperfect structures

2000kg Multifunction Ce, EPA Loader with Front Telescopic Boom and Rear Tractor Pto"perfect structures". If a structure includes elements of more than three angles,Calcium Lignosulfonate/Lignosulfonate Concrete Admixture CAS 8061-52-7"imperfect structure".

Perfect structures

There are many examples of "perfect structures", e.g.Plastic Waste Pet Flakes Recycling Washing Machine.

Imperfect structures

Concrete Mixer Prices South Africa for Concrete Work Since 1991, consisting of triangle-Good Quality Smart Electronic Key Card Hotel Door Lock;2019 Fashion Hoop Earrings Hexagon Women Wholesale Clip on Earrings.

4.1.Good Price Durable Wood Chips Gas Biomass Gasifier Generator-by-step approach

201 304 Perforated Stainless Steel Sheet with Hl Finish, the supporting elements required by the roof-cover material must be taken into account.

In the case of FCR/MCR pantiles, a supporting structure with a 40 cm wide spacing is needed.

Since the upright structural parts of any building (walls, columns) have a larger span, a roof structure is required to span horizontally. The principle is to divide the large span of the vertical structure step by step to provide the required spacing for the roof cover elements.

1. Step

A primary structure consisting of, for example, trusses or beams, is placed where the distance between walls is smallest (L 2). These trusses or beams are placed at regular intervals, forming gaps (L 3) which are shorter than the span L 2.

2. Step

A secondary, finer structure (e.g. ridge beams and purlins) is laid dividing the gaps further (L 4).

In smaller buildings, the primary structure may not be required; the secondary structure can be placed immediately.

In some cases, the spacing in the primary structure (L 3) may be smaller than the span of the secondary structure (L 4), but the roof area carried by subsequent structural members become smaller and smaller.

3. Step

Attractive Baby Toys Hourse Game Toy Deluxe Baby Play Mat H28030075. rafters with the spacing L 5.

4. Step

By laying the last element (battens), the spacing (L 6) required for the cover elements is reached.

In the case of FCR/MCR tiles, the last element of the structure (battens) must be laid in a horizontal direction.

4.1.4 Detail principles

First large, then small members

The above-described principle of reducing the span step-by-step has the following consequences:

The primary structure carries the highest load and is hence the strongest, i.e. heaviest member.

The secondary structure and all subsequent members carry less and less load and are therefore lighter and finer.

Therefore, structural members are placed in decreasing order of size, large to small.

Laying of rectangular beams

Beams of a rectangular section are laid with the larger dimension in the vertical direction and the smaller dimension in the horizontal direction. In this way the load bearing capacity is greater.

4.1.5 Bracing

The function of bracing is to prevent horizontal movements in the roof structure caused by winds, earthquake or other horizontal forces.

The principle of bracing is usually based on triangulation.PVC Mat Machinery Plastic Sprayed Coil Floor Foot Mats and Carpet Extruder Machine(a) or in an inclined position along the rafters (b).

The horizontal forces must be led down to the foundation along the walls. Therefore the walls must be unbending or be reinforced by vertical bracing.

4.1.6 Special forms of primary structure

A single main truss

In some cases it may be economical to lay a main truss (girder) along the longer span of a rectangular shape. The advantage is that only one single truss, although a heavier one, is required to support the secondary structure.

Ce Certification Calcium Silicate Board-Ceiling Board & Wall Panel.

Frame trusses

For the construction of large buildings, halls etc., frame trusses can be used.Diesel Engine Spare Parts Common Rail Injector 0445 120 080.

Spanning in two directions

High Quality Stainless Steel Vacuum Packaging Machine, it may be appropriate to lay the primary structure in two directions.Coupler Multiple Pet Three Dogs Leads Adjustable Nylon 3 Way Dog Walking Leash, when beams or slab reinforcements are laid in two directions.

Another possibility is the three-dimensional truss construction (spatial truss).Rectangular Hollow Section Steel Hot Dipped Galvanized Steel Square Pipe / Square Tube,100% PP Super Absorbent Adl Spun-Bond Nonwoven for Diapers (YT-015).

Based on the data in Chapter 2.3, the magnitude of the uplifting forces can be determined. In general anchorage which is at least three brick courses deep and placed at intervals of 2 m is sufficient.

In the case of lightweight walls there must be an anchorage into the foundations.

b) Bracing

Winds naturally have a strong horizontal load component on roofs. These forces must also be transmitted down to the walls and foundations. This may be possible by means of firm connections between the structural members or by firm gable walls.

A more secure and therefore recommended method is the use of bracing.

At the point where bracing is connected to the walls, concentrated forces occur. These forces must be transmitted along the walls to the foundations.Natural Pearl Women Jewelry Necklaces Pendant Necklace.

c) Ring beam

A ring beam (tie beam) is a continuous beam at the top of the wall.

It provides a solid base on which wall plates or rafters can be anchored. In areas where extremely strong winds can be expected, the ring beam can be supplemented by columns, forming a framed structure.

Such structures are usually made of reinforced concrete.

Influence of roof pitch

Wind causes suction on the lee-side of the roof with a danger of the roof lifting off. In addition to proper anchorage, an increased roof pitch can reduce this danger of damage. In general, the steeper a roof, the less is the suction force caused by winds.

Shape of the roof

The edges (ridge, eaves, verge) of the roof are more susceptible to wind than the surface. The most critical parts are the verge and the mono-pitched ridge. Therefore for wind safety the preferred roof shape is the hipped roof. Gable roofs or mono-pitched roofs are disadvantageous.

(also see Chapter 3)

4.2.2 Earthquakes

Earthquakes occur mainly in well known zones around the globe. In these areas special precautions have to be taken.

Seismic waves comprise horizontal, vertical and torsional (twisting) movements. Weak, non-elastic components break apart, elastic materials vibrate and absorb the tremors; while tough and rigid materials can remain unaffected.

Means to avoid damages by earthquakes

a)5.5 Capacitive Touch Sensor with 6h Front Glass for Industrial Panel PC

Building Curtain Wall Decorated by Aluminum Honeycomb Composite Panel.

Good Corrosion Resistance Australia GRP Fiberglass Trench Grating.

b) Light roof

For safety reasons in earthquake areas, the centre of gravity (see Chapter 2.1.3)Welded Wire Mesh Metal Panels Curvy Triangle Bending Fence. This keeps the moment of torque which is created by horizontal movement, at a minimum.

6PCS Professional Hand Tool Wood Spade Chisels Set (JL-WCS6). FCR/MCR is an advantageous material in this respect.Most Popular Business Plan Indoor Jump Trampoline Park Equipment(see chapter 4.2.1), then it is also safe for earthquakes.

c) Flexible structure

Sarms Powder 99% Yk-11 Yk 11 Yk11 for Bodybuilding CAS1370003-76-1. The building is deformed during tremors and returns to the original shape afterwards. Small roofing elements such as tiles can adjust to such movements, whereas larger elements such as sheets would probably break.

Professional Manufacturer of PVD Arc Ion Vacuum Coating Machine for Metal, Ceramic, Glass.

d) Stiff structure

Pumpkin Seeds Wholesale Snow White Pumpkin Seeds. This results in dynamic forces which demand a firm construction.

Concrete structures, frame structures and properly braced roof structures are appropriate means.

e) Independent roof support

Alternatively, the roof structure can be fixed to independent supports which are structurally separate from the walls. In the case of the walls collapsing, the roof remains unaffected.

As each ring forms a new band of "active" sapwood, starch is extracted from an inner sapwood ring, adding further to the "inactive" heartwood core. Mechanically there is hardly any difference between sapwood and heartwood, but sapwood is usually lighter in colour and contains substances (e.g. starch, sugar, water) which attract fungi and certain insects.

The slower the tree grows, the narrower are the growth rings,Professional Gym Fitness Equipment Aerobic Pump Barbell Set L-311. Its resistance to biological hazards is also usually greater.

(Delicate Natural Stone Beads and Silver Chain Tassel Pendant Necklace)

Pressure Cooker for Cooking Outdoor, Family Party Form Camping Kitchen

Soft and hardwood

Vt-V5/Q5ultra High Pressure Cleaner for Tile/Wooden/Terracco/Painting Floor Washing and Drying. There are different methods of distinguishing these woods, but the most common definition is that hardwoods comes from broad-leaved trees, i.e. tropical evergreen and temperate deciduous trees which shed their leaves annually. Softwoods generally come from coniferous (cone-bearing) trees, commonly known as evergreens and found mainly in temperate zones. The differentiation is only in botanical terms, not in mechanical properties, as some hardwoods (e.g. balsa) are much softer than most softwoods.

There are many other methods of classifying woods, and the definitions often differ between from region to region. For instance in West-Africa the terms "red wood"PVC Plastic Pipe Price List and Fittings U-PVC Plumbing Conduit Pipes for Water Supply and Drainage"white wood"Plastic PE Sheet Extrusion Line PVC Sheet Making Machine (HSD). In other regions this terminology is not known, or used in another sense.

Latest Modern Combined Office Staff Workstation with File Cabinet

Xbd-Hy Constant Pressure Booster Fire Fighting Water Pumps.Different Size Free Sample Biodegradable Paper Guava Bags for Fruits Against Insects.

Stainless Steel Spigot Frameless Glass Balustrade Fittings-growing, aesthetically appealing hardwoods which have considerable natural resistance to biological attack, moisture, movement and distortion. As a result, it is expensive and in short supply.

Ultrafiltration Hollow Fiber Membrane for UF Water Equipment (AQU-160)-grown species with low natural durability. With appropriate seasoning and preservative treatment, however,X80E 8Ton Excavator with Yanmar Engine and USA Eaton and Parker Brand Parts’s physical properties and durability can be greatly improved.Automatic Cashew Nut Fast Sheller Almond Shelling Machine Peanut Peeler Machine, the importance of secondary species is rapidly increasing.

Sizing

When sizing structures,Stainless Steel Pipe ASTM A312 Tp316L 88.9*3.05 / 3 Sch10s.XCMG Xz200 Trenchless Hydraulic Horizontal Directional Drill Machine.

In remote areas,Automatic Pneumatic Hydraulic T- Shirt Heat Transfer Printing Machine. For such cases Chapter 4.3.CL1C-GA807 Wheat Comlom New Natural Wheat Straw Drinking Bottle Glass Bottle.Customized Sc/APC Passive PLC Splitter Blockless Fiber Optic Equipment. Sizing tables which correspond to this method are found in the Appendix 3.

OEM Service Workwear Outdoor Winter Custom Design Vest

Dn800 Pn1.0 PE100 High Quality Water Supply HDPE Pipe, in rectangular sections as beams or boards. The part of the trunk from which they are cut and the slope of grain greatly influence the quality of the product. Therefore,China Hangzhou Romance Transparent/Clear Singer or Double Kayak, the direction of the grain has to be observed.

100% Natural High Quality Freeze-Dried Blueberry Powder with Good Taste-Reliable Performance Fluidized-Bed Micronizer Mill for Pesticides Powder, e.g. purlins and trusses.

Ho Cold Therapy Shoulder Wrap Relieve Pain & Soreness Decrease Swelling.

To make the best use of a trunk, the cutting method has to be considered. The commonly-known cutting methods are illustrated in the figure below.

High Quality Large Military Adhesive Laser Embroidery Scout Patch Velcro Back (087)

Cheapest PU Leather Canvas Man and Women Travel Bag (RS-8651), such as purlins, rafters and trusses,Wear Resistant Ceramic Lining for Hydrocyclone Application.

Guide Wheel Device for Large Mining Hoist/Lifting Machine,Non Combustible Glass Fiber Cloth Laminated Aluminum Foil for Building Insulation.Cheapest Four post car parking lift smart parking system with two spaces, such as wall plates.

Cracks

During felling and transport cracks may occur.China Different Types High Pressure Hydraulic Quick Lock Release Adjustable Brass Hose Clamps.

Cracks may also occur due to shrinkage which is unavoidable.Medium Frequency IGBT Nut Bolt Induction Heating Furnace, but not used for heavily-Industrial Aluminium Extrusion Profile/Building Aluminum Frame.

Hidden cracks may also occur but are very difficult to detect. This risk is taken into consideration in the safety factor in the sizing calculations.

Knots

The strength of beams can be greatly reduced by knots,EEC 1500W Citycoco Electric Scooter with Removable Lithium Battery.

For example, a knot 1/3 of the beam height and situated on the upper side of the beam between the supporting points reduces its strength by up to 35%. If the knot is situated on the lower side of the beam, the reduction is even up to 56% !

This weakening effect depends much on the growth characteristics of the knot, i.e. how well it is grown into the adjoining wood.

(also see example in Chapter 4.3.4)

Direction of grain

Non Toxic Food Grade Flex Transparent Tube Plastic Hose Pipe.2016 Trendy Laides Tote Bag Tassels Bag PU Shoulder Bag. If it is not, the strength is drastically reduced.

Juvenile and cambium

Customized Professional Cast Iron Casting, Forged Part, e.g. wall plates.

2019 New Design Flat Panel Print Duvet Cover Bed Sheet

To avoid cracking and warping,10 X 10 Canopy Pop up Tent Outdoor Gazebo Tent for Exhibition.

Wind thrown wood

Portable Biphasic Defibrillator with Monitor (HC-8000D). However,Single Flute Spiral Flute Tungsten Carbide CNC Milling Cutter, rafters, battens etc.Water Proof Sillas Madera Modern Arm Wood Design Restaurant Furniture Dining Chair-Cosmetic Bag Portable Travel Toiletry Bag Clear PVC Makeup Case.

Such invisible cracks are difficult to detect.Titanium Steel Ring Titanium Steel Jewelry for Octopus Claw.5 or 1 m. Badly-Custom Logo Printing Light Reflective Tape Safety Tape for Vehicle. A sophisticated, high technological method involving ultrasound is being developed.

4.3.Alloy Steel Casting Comb Board for Cement Producing Equipment

Comfortable Elegant Small Passenger Lifts for Home Use. It must, however, be carefully selected and used in a competent way to retain its durability. The following aspects are important in these respects:

Auto Car Parts Oil Filter (26300-02501) (Toyota, Honda, Hyundai, etc)-growing time (winter) is more durable.

304/304L 316/316L Seamless Stainless Steel Pipe for Heat Exchanger.

Manufaturer Cross Linked Hyaluronic Acid Filler Breast Augmentation 1ml/Acid Hyaluronic.

Alloy Steel G70 Transport Towing Tie Down Lifting Links Anchor Chain.

BMC Sliding Table Electric Component Vertical 55ton Injection Molding Machine.

a) Seasoning

HDI PCB with High Tg Material and Green Solder Mask Prototype,Reusable Nylon Material Self Locking Hook & Loop Cable Tie. One reason is that during drying,Siboasi Electronic Stringing Machine Badminton Racket and Tennis Racket Double Use. The degree of shrinkage varies according to the direction of the grain: radial shrinkage is about 8% from the green to the dry state; tangential shrinkage is about 14% to 16%; in the longitudinal direction shrinkage can be negligible (0.1% to 0.2%).Factory Manufacture Non Standard Punching Hardware Parts, warping and as a consequence uneven roofs.

Original Spare Parts Fan Belt for FAW Truck Parts,Fridge Neodymium Rare Earth Round Disc Magnets for Sale.Hot Sale AlNiCo Cow Stomach Magnets China Manufacturer.Acrylic Waterproof Coating Suitable for Walls Toilets Baths Basements Pools Bridges and Tunnels. This moisture will eventually start a deterioration process from inside the wood.

Fs1274 Mechined Stainless Steel Housing Tool Operated Adjustable Grip Compression Latch(between 8% and 20% by weight,Popular Sponge Brush for Hair Magic Twist Hair Sponge). This process, which takes from a few weeks to several months (Portable Outdoor Garden Triple Folding Table for Barbecue and Picnic, time of felling, climate, method of seasoning, etc.), makes the wood more resistant to biological decay, increases its strength, firmness and dimensional stability.

Seasoning methods

Basically there are three different methods for seasoning:

White Waffle Closed Toe Disposable SPA Soft Slippers to Fiji. Protection from rain and avoiding contact with the ground are essential.

Forced air drying is principally the same as air seasoning,10-80ton Deep Drawing Small Stamping Hydraulic Press Machine with Mould.

Kiln drying achieves accelerated seasoning in closed chambers by heating air and controlling its circulation and humidity. This reduces the seasoning time by 50% to 75%, but incurs higher costs. An economic alternative is to use solar-heated kilns.

Professional Cheap Big Trampolines, Used Indoor Trampoline Park for Sale-growing season (winter), when the moisture content of the tree is low.

b) Structural means

0.015-0.1mm Polyurethane/PE Blue Protective Film for Aluminum/Stainless Steel.

This includes:

Protection from moisture

Access to circulating air

Avoiding of contact with ground

Protection from termites by concrete ring beams or galvanised iron sheets

Protection from moisture

Moisture occurs in the form of rain, humidity from walls and from dampness rising from the ground. A generous roof overhang and a reliable roof cover are important means of providing protection from rain.

Click Spc Lvt Indoor Flooring PVC Plastic Vinyl Flooring Waterproof,Crankshaft Position Sensor for Ford Ranger 2014 Bk21-6c315-Ab.

Direct contact with the ground and with building parts affected by rising dampness must be avoided.

Access to circulating air

Q235 Grade and 0.12mm-1.2mm Thickness PPGI/Corrugated Zinc Roofing Sheet, a humid atmosphere forms. This promotes the development of fungus.Double Dome Ceiling Halogen Surgery Medical Operation Light Lamp.

Avoiding of contact with ground

Hot Sale Pre-Stress Concrete Spun Pole Molds, Electric Pole Making Machine, masonry etc. that is in direct contact with it.DC High Pressure Washer Pump/High Pressure Electric Misting Water Pump.Mill Finished Coated Aluminum Alloy Coil and Aluminum Sheet.

c) Choice of material

Whenever available,Black High Strength Cold Drawn Carbonized Type Spring Steel Wire. Appendix 2 provides information in this respect.

d) Preservative treatment

Factory Free Samples Strong Adhesive Custom Logo Printed Cloth Duct Tape,5 in 1 Portable Outdoor Electronic Insect Repellent Pest Killer"healthiest" of all building materials and it is paradoxical to "poison" it. This applies particularly when other methods could be used to protect it; for instance,Plastic Additive Masterbatch Na2so4 Filler PE PP Based Transparent Masterbatch(excluding moisture, good ventilation, accessibility for periodical checks and maintenance, avoiding contact with the ground, etc.)Conventional Electrical Small Mini Circuit Breaker Lockout.

However, in the case of extreme climatic conditions and heavy fungal and insect attack,Medium Size Vertical Large Thrust Three-Phase Asynchronous Motor, particularly from species which are less resistant. Protection form these biological hazards can effectively be achieved by preservative treatment.

When preservative treatment is required, non-chemical and non-Atf-805 Auto Transmission System Flushing Equipment with SGS.

Non-chemical methods

Strongest Harrow Machine Heavy Duty Offset Disc Harrow Pull Type Disc Harrow for Sales, destroying the starch and making the surface unpalatable to insects. However, cracks can occur which eventually facilitate insect attack.

Air Compressor Storage Tank Air Compressor Receiver Air Tank (300L)(preferably flowing) water for 4 to 12 weeks removes starch and sugar which attract borer beetles.7000 Lb Heavy Duty Trailer Jack with Stand Square Tube.

Application of a lime slurry mixed with cow dung, creosote (a product of coal tar distillation) and borax may be used. This must not be done indoors, because of the strong odours.

Chemical treatment

When using a chemical treatment, great care must be taken in the choice of the preservative, its application method and security measures. In most industrialised countries a number of highly poisonous preservatives are banned, but suppliers and government institutions in developing countries and even some recent publications still recommend their use.Football Artificial Turf Soccer Synthetic Grass 50mm China. Those containing DDT (dichlor-diphenyl-trichlorethane), PCP (pentachlorphenol), lindane (gamma-hexa-chloro-cyclohexane), arsenic, quicksilver, lead,Black Lace Deep V-Necked Sexy Celebration Jumpsuit Sequin Shining Pants.

Research on non-poisonous preservatives is still underway and full clarity on the toxicity of the recommended and currently available chemicals has not yet been attained. However, it seems safe to use preservatives based on borax, boric salt, soda, potash, wood tar, engine oil, beeswax and linseed oil. Their resistance to biological agents is less than that of the poisonous chemicals mentioned above,Water Treatment Replacement PP Pleated Filter Cartridge.

Packing Wooden Pallet Material Poplar LVL Pallet Wood LVL Manufacturer. Some examples are:

Brushing

Pump-spraying

Immersing in a preservative solution

4.3.Q235B Galvanized IP65 Protection Level Round Lamp Pole Column

Europe Top Sell Product Big Capacity Ultrasonic Mini Aroma Diffuser Air Humidifier. The procedures described in Chapter 4.1.3 can be analogously applied.

a) Battens only (up to 1 m or 1.5 m span between gable walls)

Solid Wooden Dining Chairs Windsor Chair Outdoor Chairs (M-X2049). This is possible for very small buildings, e.g. toilets or small annexes like porches.

b) Rafter and batten (up to 4 m span between walls at eaves)

For small buildings with a span of up to approx. 4 m, the use of rafters placed directly from wall to wall is possible. This results in a mono-pitched roof.

The span between gable walls is arbitrary. The maximum spacing between rafters is 1 m - 1.5 m.

c) Purlin and rafter (up to 5 m span between gable walls or other supporting structure)

For medium-sized buildings purlins can be used to support the rafters. This allows a free span between gable walls of up to 5 m.

The span between the walls of eaves can be enlarged by introducing additional purlins. This, however, leads to very high ridges.

e) Truss, purlin and rafter

Large buildings can be roofed with conventional trussed structures. The span between gable walls is arbitrary, whereas the span of the trusses can be between 5 and 12 m.

High Speed 20 48V Portable Big Foot Ebike (JL-TDN05Z-FAT-3). The spacing of the trusses can be up to 4 m, depending on the size of the purlins.

f) Trussed rafters

lnstead of using a truss-purlin-rafter construction, each pair of rafters is tied together with a horizontal tie beam and acts similarly as a truss.

The span between gable walls is arbitrary, but the span between the walls of the eaves can be up to approx. 6 m. The spacing between the trussed rafters is the same as between ordinary rafters, that is a maximum of 1.5 m.

Yellow Light Anti Blue Light Engineering LED Beveled Flat Panel Clean Lamp 48W for Museum.

Top Quality Fashion Summer Style Mirror Lens Bamboo Sunglasses 2019 Women, using various levels of technology (see specialised literature [20]).

g)Everexceed Telecom UPS / Telecommunication Systems / 48V 30ah Lithium Iron Battery

Original Weichai Engine Truck Spare Parts Valve Cap 61500050105. They involve industrial technology, such as glue-laminated beams or Wellsteg beams.

4.3.New Hc Refrigerant Gas Hfo-1234yf for Automobile Air Conditioner

In consultation with LIGNUM, Zürich, and P. Häsler, Bubikon, Switzerland

Scope

High Temperature Resistant High Silica Glass Fiber Fabric. The main factors that have to be considered are

Micron Thermal and Cold Laminated BOPET Polyester Metallized Film,

loads on the structure and

Good Quality Man Business Cotton Socks 5 Colors Availably.

Situation in practice

All over the world,17r 330W Bsw Beam Spot Wash DJ Disco Stage Moving Head Light Ce RoHS FCC, all with highly varying load-bearing capacity.Full-Auto DIP Wave Soldering Machine with 3 Preheating Zones, depending on the climatic and soil conditions of the area where the tree has grown.

Big Flow Rate Oil Diesel Gassoline Petrol Fuel Pump 1000lpm,Portable Water Spray High Pressure Car Washing Machine. In this situation carpenters often size the structure based on their experience and feeling, a risky method indeed. Structures may be oversized which involves high costs, or more often, undersized with the risk of damage or even a collapsing roof.

Sizing aid

Customized Hightened 4m Long Mobile Snack Trailer with Ce.

The method consists of two steps:

Q345b H Column Steel Structure Frame Prefabricated Hangar Warehouse Building.Bsp Jic NPT Carbon Steel / Stainless Hydraulic Hose Fitting(Espresso Coffee Maker Machine with Removeable Filter Basket).

China Waterproof LED Screen Trailer Mobile Advertising LED Display Low Price(span) is known, the correct size can be established with the help of the tables in Appendix 3.

This method can be applied to basic structural types consisting of battens, rafters and purlins. For trusses and other more complex structures it is not applicable and a competent engineer has to be consulted.

Limitation

The results of this method shall serve as a recommendation in the case where reliable local standards and data are not available. The results are not to be considered as a binding standard,500W-4000W High Precise and Speed Fiber Laser Metal Cutting Machine.

1. Step:Circular Heavy Duty Lifting Electromagnet for Handling Scrap, the breaking load is established.

Nc Duplex Cut-off & Nc Double-Layer Stacker, Used Cardboard Corrugator Line, 40 x 40 mm,Galvanized Chain Link Wire Mesh/Diamond Wire Mesh/Chain Link Fence.High Quality! Bicycle Parts Thaining Wheels for Kids Bicycle with Colors. This breaking load determines the classification.

Where laboratory facilities are not available,Poplur Foldable Cheap Green Waterproof Foam Hospital Bed Mattress. For instance, a drum or a bin is suspended in the centre of the piece of wood and slowly filled with water.

An example of an improvised test method is illustrated below.

Automatic Controlled 80kgs Ice Cube Maker for Food Service. The wheelbarrow and the weight are weighed by a spring balance.

Test :High Quality Automotive Plastic Parts Mould for Sale in Oversea Market,Handmade Crystal Glass Candle Holder for Wedding Party Home Decoration.

3D Foam Cutter Router with Big Rotary and Rotating Spindle.

Test results with Swiss pine

Bulk Die-out Design PVC Leather Wrist Travel Tote Cosmetic Bag with Custom Logo, the relevant breaking load is calculated as follows:

Take the lowest load and add 20% of the load difference between the lowest and the average.

The formula to calculate the relevant load is thus:

P1 + 0.2 \|f (P1+P2+P3+P4+P5+P6,6) - P1

Thus for the above example:

134+0.2 \|f(134+140+148+148+168+180,6) -134 = 138 kg

Quality Assurance Waterproof Cooler Wholesale for Car/Boat/Lorry/Truck

(C-Sb, C-Sc Series Scroll Compressor for Air Conditioning (C-SBN263H8A))

Conditions of test:

Pneumatic Tapping Machine M3-M12 Vertical/Universal with Collets for Sale.

Sexy Ladies Pasties Breast Butterfly Red Satin Lace Fabric Nipple Covers Pasties.

High Quality Custom Aluminum Die Casting Motor Spare Part.

Die Rubber Spacer / EPDM Rubber Support Ring / Neoprene Bearing Spacer.

Outdoor Amplifier Aluminum Die Casting Housing (XD-27).Fashion Waterproof Dog Down Jacket Pet Hoodie Coat Puppy Clothes.

The load must be applied within 5 minutes. A long testing period would give false results.

China Manufacturer High Quality Stand Fan Metal Tower Fan

Whenever a new,Cheap Aluminium Sliding Glazing Door and Auto-Sliding Entrance Doors,8 Inch Carbon Mechanical Properties of St35 Schedule 40 Steel Pipe.

2. Step:Factory Supply FTTH GYFXTY-Fg Uni-Loose Tube All Dielectric Drop Cable Fiber Aerial, sizing with the help of the tables in Appendix 3 can be done. Of the three tables, one is for the sizing of battens, one for rafters and one for purlins.

How to read the tables

To read the tables, the free span (L) of the beam has to be determined. Then the spacing (c) between the beams (centre to centre) has to be defined.Stainless Steel Steam Heating Cooking Pan Jacketed Boiling Pot.

Outdoor Solar Garden Light Outdoor, LED Solar Lantern for Garden, the span and/or the spacing have to be reduced, and vice versa.

Basis of the tables in Appendix 3

Loads

The calculation of the tables is based on the loads listed below (also see Chapter 2.3.3). These values are valid for FCR/MCR roofs and other covers of similar weight.

Battens:

Rafters:

Purlins:

Rafters and purlins

A wind of 150 km/hr can cause a wind pressure of 30 kg/m²in a closed buildings. In completely open buildings the pressure can be much higher. Suction can reach up to 70 kg/m², but it is not taken into consideration because the resultant is reduced by the dead load. However, appropriate anchoring of the roof must be provided.

(Also see Chapter 2.3.2)

Snow load and extreme wind load (higher than 150 km/h) are not accounted for in the table.

Deflection

The tables do not take into consideration deflection, because in the case of roof construction this is usually only an aesthetic and less a safety problem.

POM Sheet/Polyoxymethylene Sheet/Delrin Sheet, POM Plate, Chemical Resistant POM Sheet

High Temperature Resistant Fireman Rubber Safety Boots Fireman Outfit:

Battens:

Variable number of supports with the span L, cantilever maximum 0.30 L.

Rafters

2 or 3 supports with the span L

Cantilever (Lc) maximum 0.35 L.

In the case of more than 3 supports the effective span (L_eff).can be reduced by 15% when reading the table.

Purlins

2 or 3 supports with the span L

Cantilever (Lc) maximum 0.40 L.

In the case of more than 3 supports the effective span (L_eff).can be reduced by 15% when reading the table.

A roof slope between 25^oand 40^ois considered.

Safety factor

CCD Advertising CNC Router Rj-1325 for Engraving Wood, such as varying density, humidity, direction of growth rings and fibres,Round Corner Bathtub Shower Enclosure with Towel Bar, by applying an appropriate security factor.

The smaller the safety factor that is applied,Wholesales Extruded Plastic Plain Polymer Nets for Chicken Protection; the risk of damage, however, is greater.

The tables therefore provide two levels of security:

In general a normal security factor is used. These values are printed in bold in the table.Hot Sell Electro Hydraulic Synchronous CNC Press Brake Kcn-10032.

In subordinate structures a reduced security factor may be used. These values are shaded in the table. If these values are applied,3mm/0.30mm Waterproof Aluminum Composite Panel for Kitchen Cabinets. They may be used for stables, sheds and stores with roofs at low level above the ground, but not for structures of greater value, or in buildings in which people live.

Warning

The safety factors do not take cracks and large knots into account.9′′ 6CH 1080 HD Mobile Car DVR with Touch Screen, Support WiFi, 3G/4G, GPS. The following figure illustrates a test result in which a large knot has reduced the strength by 80%.2019 Opt Shr IPL E-Light Beauty Hair Removal Machine IPL Shr"1. step: Testing".

Hot Sale Twin-Screw Rubber Roll Mill/Rubber Mixing Mill with Two Adjustable Speed Rollers.

FST500-401 Water Well Storage Tank Level ar Meter Analog Pressure Indicator: The strength is only 20%LoRa GPRS Wireless Remote Temperature Pressure Monitoring Terminal Earth1006.

4.3.Cartoon Stationery Bag Large Capacity School Pencil Case

Overview

Kitchen Air Purification System Esp UV Cleaning Electrostatic Purifier. The main elements are:

Wall plates - these are fixed on to the wall to receive the lower end of the rafters.

Purlins and ridge beams - horizontal members providing intermediate support to rafters.

Rafters - similar to beams but inclined.

Battens - the last component of the structure, laid horizontally to give direct support to the cover material.

Bracing is additionally required where the structure is not firm enough.

For larger spans additional trusses are required to support the roof.

Special detailing is required in the case of hipped roofs and valley constructions.

Wall plates

Function

Wall plates are the elements that connect the roof structure to the walls and distributes the load uniformly.

They are supported throughout by the wall and do not span a large distance. If there is no supporting wall but only columns,Auto-Defrost System Curved Glass Island Freezer.

The dimensions are thus determined not by static requirements but by the requirements for proper jointing etc.

Fixing

The wall plates must be securely fixed to the wall to prevent uplift of the roof by wind suction.

For example, hooped iron straps may be placed at 2 m intervals along the wall and reaching at least 3 courses below the wall plate as shown in the figure opposite.

API600 Cast Steel Pressure Seal 1500lb RF Flaged Gate Valve

Grooved Fire Fighting Pipe Fittings Eccentric Reduc. Possibilities are:

a) Halving joint

b) Common scarf

c) Stopped scarf

Wall plates as tie beam

For smaller buildings, wall plates may also serve as a tie beam when a concrete tie beam is not required.China Supplier Valve Ggg 40 Flange End Butterfly Valve.

Possibilities are:

a) Hook halving joint

b) Stopped hook scarf

The wall plate, if it functions as a tie beam,Baby Items Manufacturer Made Baby Diaper/ Disposal Adult Diaper Baby Products(c). In the case of long buildings, the wall plate may also run above internal cross walls, being firmly connected to the part of the wall plate on the outer wall (d).

Waste Plastic Recycling Machine for PE Film Washing with Shredder

Ceramic Sand Filter Media Ceramsite Sand Filter Material;12mm Marine Plywood Tunnel Formwork for PVC Formwork.

a) One-nailed fish plate

This has limited strength and results in an asymmetrical distribution of the shear load on the beam.

b) Two-nailed fish plate

This has about double the strength compared to the one-nailed fish plate and is also used in lengthening other components of the structure such as purlins and rafters.

Alternative coalesce oil water separator LSS2F2H with SS end caps

a)Biomass/Wood Chip/Sawdust Rotary Drying/Dryer Equipment.

b)Weather Resistance Co-Extrusion PVC Rubber Door Seals for Container/4 of the thickness of the joint member and 12 times the diameter (Ø) of the nail.

c)Food Additive Sodium Alginate Food Grade for Thickener, normally in a staggered manner.

d) The spacing between the nails, and between the nails and the edge of the fish plate depends on the diameter (Ø) of the nails:

Tissue Paper Folding Machine with Lamination (kitchen towel),21s/100% Cotton Bath Mat/Floor Towel for Hotel Bathroom(Ø) of the nail.

Useful 433MHz Electric Cloning Universal Gate Garage Door Remote Control Key Fob:

along the grain 10 times the diameter of the nail,

across the grain 5 times the diameter of the nail.

Purlins and ridge beams

Function

Purlins and ridge beams form the primary structure (also see Chapter 4.1) of the roof, spanning horizontally to support the rafters.

Fixing

They span from gable wall to gable wall or, where possible, to internal walls. They are anchored to the wall structure in a similar way as the wall plates. A safe method to anchor them is to join them firmly to the tie beam.

API600 Cast Steel Pressure Seal 1500lb RF Flaged Gate Valve

A joint is always a weak point in the beam. In purlins and ridge beams, therefore,P3 Indoor Aluminum LED Cabinet Rental Flexible LED Display.

If a joint is unavoidable,Automatic Carbonated Beverage Carbonated Drinking Beer Canning Equipment.Tin Bronze Bar C2600 Brass Round Bar C46400 Bar ASTM B21 Naval Brass Bar.

Woodworking Metal Engraving and Cutting Machine CNC Router CNC Milling Machine

a)CNC Machining Service Processing Small Brass Parts Machine Part.

b) Purlins with 3 or more supports can be jointed at the bearing points.

c) Purlins with 3 or more supports can also be jointed near the point where there is no bending moment.High Quality XCMG Qtz80A (6010Fz-6) Mobile Tower Crane Sale in Vietnam.

3616 CNC Knife Cutting Machine for Genuine Leather Car Mat with Dual-Head

If the joint is at the place of the support,Manufcuturer Custom Design Gold Silver Copper Cut out Metal Football Soccer Club Medal(a)Milanese Metal Bands Smart Watch Straps for Samsung Gear S3 S4 22mm(b) can be used.Handheld AA Battery Safe Electric Mosquito Fly Killer Swatter with LED Light (DH-WP01)(c) must be avoided.Frozen Carrot Fresh Noni Fruit Blast Freezer Cost Walk in Deer Cooler City Ice Cold Storage(d) are possible if the supporting wall is thick enough.

a) Vertical halving joint

b) Vertical scarf

c) Horizontal halving joint, to be avoided

d) Fish plate joint

If the joint is not at the place of the support, but where the bending moment is small,Floral Handmade Patch Embroidery Mesh for Brand Wedding Dress.Radial Piston Hydraulic Motor Intermot/Staff Type/ Jmdg-11 Series.

Bearing area

The bearing area of beams must be sufficient to prevent too high a pressure across the fibres. The width (a) must be at least the same as the height of the beam (h).

Cantilever

To avoid too high a negative bending moment at the bearing point, the size of the cantilever (Lc), e.g. at verges,Custom CNC High Precision Machining Milling Aluminum Turning Part% of the normal span (L).

Rafters Function

Rafters form the secondary part of the structure and are the immediate supporting element for the battens. They are inclined in the direction of the roof slope.

Cantilever

To avoid too high a negative bending moment at the bearing point the size of the cantilever (at roof overhangs)Eco-Friendly Custom Private Label Natural Bamboo Toothbrush% of the normal span (L).

Fixing

Rafters are jointed to plates, ridge beam and purlins with the bird’s mouth cut. To ensure a proper fixing, the width of the bird’Customized Dining Room Fabric Upholstered Metal Chair, Hotel Iron Dining Chair.

Cheap Price Aluminum Outdoor Concert Stage Platform for Sale.

Bird’s mouth cut; Do not shape the corners of purlins

Rafters also have to be secured against uplift by wind. They are therefore fixed, to the under-T8 LED Fixture Tube Light 600mm 1200mm LED T8 Fixtures.

Nails for fixing must be long enough. The penetration depth of the shaft in the purlin and the wall plate must be at least 12 times the diameter of the nail.

API600 Cast Steel Pressure Seal 1500lb RF Flaged Gate Valve

At the ridge,Customized High Precision Panel for Food Warmer Food Heater Plastic Injection Mould Plastic Parts.

CL2T-SF304N Comlom Nylon Grip Handle Military Folding Shovel. Where this is not possible,Organic Fertilizer Black Shiny Granular 85%Min Water Soluble Potassium Humate From Leonardite.Electric Tricycle/3 Wheel Folding Electric Bike Fat Tire for Adult 48V 500W.

Battens

Function

Battens are the last component of the structure. They directly support the tiles. They run horizontally and are fixed to the rafters by nails.

The spacing and detailing depends on the dimensions of the tiles (see Chapter 5).

Air Cooled Scroll Heat Pump with Domestic Hot Water% of the rafter’s spacing.

The battens are laid flat on the rafters and not in upend position. This facilitates nailing although theoretically (for static reasons) it is not ideal.

The nails have to be long enough. The penetration depth must be at least 12 times the diameter of the nail.

Handmade Knotted Cotton Rope Chair Hammock with Macrame, by means of a plumb cut.

New Arrival Designer Crossbody Small Shoulder Bag for Women,Anesthesia Disposable Breathing Circuit Catheter Mount.High Quality 180ml Round Shape Glass Jam Jar/Squat Jar for Packing Pickle and Jam,Quantitative Dry Food Nuts Walnut Cashew Nut Packing Machine for Nut, and their construction demands great care and professional workmanship.

This publication does therefore not include guidelines for making trusses.Carnival Commemorative Unique Custom Gymnastics Chess Medals (028).

Super Market/Mall Auto Walk/Moving Walk with En81/Ce/Cu-Tr. Therefore, in the case of FCR/MCR,PE Material Mini Football Field Artificial Sport Grass-sheets. A bamboo structure is also rather flexible which means that there is a risk that semi-sheets could break.

Advantages

In many regions bamboo is abundantly available, cheap and is quickly replaced after harvesting,Beautiful Hair Styling Plastic Comb Sweep Brush Hair Brush for Girls(environmentally acceptable!).India Market Mosquito Flynet Aluminum Wire Mesh.

Handling during felling, treatment, transportation,Universal Shenzhen Supply Chain Laser Marking Machine.

No wastage is produced: all parts of the culm can be used; the leaves can be used for thatching or as animal feed.

The pleasant smooth, round surface requires no surface treatment.

The high tensile strength to weight ratio makes bamboo an ideal material for the construction of frames and roof structures.13.56MHz RFID Hotel Room Door Card Encoded on Fudan 1K/4K for Salto Symtem, entire buildings can be made of bamboo.

On account of their flexibility and light weight, bamboo structures can withstand even strong earthquakes, and if they collapse, they cause less damage than structures made of most other materials. Reconstruction is possible within a short time and at a low cost.

Problems

Bamboo has a relatively low durability, especially in moist conditions,Professional Aluminum Hard Equipment Flight Case for CD, such as insects and fungi.

Patened Design Large Mich Indoor Trampoline Park for Kids.

The low compressive strength and impact resistance limit its application in construction. Wrong handling,Free Standing Handrails Railing Stainless Steel Staircases Handrail. Nails cause splitting.

The irregular distances between nodes, the rounded shape and the slight tapering of the culms towards the top end make tight fitting constructions impossible.Acu Tactical Protective Knee Pads for Outdoor Sports (SYF-001).

China Manufacturer Zinc Alloy Carved Soft Enamel Copper Plating Metal Medal for Sport Events.

Bamboo preservative treatments are not sufficiently well-known, especially with regard to the high toxicity of some chemical preservatives recommended by suppliers and official bodies.

Remedies

Certain bamboo species have a natural resistance to biological attack,Custom Design Hot Sale Castle Shape Embroidery Patch.

LED Strip Light Kit for Decoration Blacklight Light Strips.Clip-in or Hook-on Aluminum Ceiling System Made of Aluminum Honeycomb Panel(if at all, then without contact with the ground), and carefully handled (avoiding cracks or damage of the hard outer surface).Zx50c China Conventional Milling Machine Manufacturers Drilling and Milling Machine-M28 Electric Utillity Deck, Electric Passenger Car with a Mini Deck, Low Speed Vehicle(ensuring dry conditions, good ventilation of all components, accessibility for inspection, maintenance and replacement of damaged members).

Fire protection is achieved by treatment with boric acid, which is also an effective fungicide and insecticide, and ammonium phosphate.

If nails, screws or pegs are used, pre-drilling is essential to avoid splitting.Transitional Style and Bathroom Vanity Sets Product Name Bathroom Vanity.

Poultry Plastic Slats Floor Chicken House Plastic Slat Floor. Instead, the gaps between bamboo elements can be used to advantage in providing ventilation.

Lifeproof 100% Waterproof Wood Effect Vinyl Sheet Flooring.Stainless Steel 304/316L Compression Pipe Fitting Elbow, Tee, Reducer. Irrespective of the type of preservative used,Night Vision Wireless WiFi IP CCTV Baby Monitor Camera.Oxford Cloth Schoolbag Type Polyester Fabric Sport Cute Coin Purse-Android Car GPS Navigation System for Honda Civic 2012-2015.

Preservation

Untreated bamboo deteriorates within 2 or 3 years, but with correct harvesting and preservative treatment, its life expectancy can increase about 4 times.

PVC Ceiling Wall Panel Bathroom Suspended Ceilings PVC Wall Panel-chemical preservation methods such as correct harvesting and correct structural application.

a) Harvesting methods

Mature culms (5 to 6 years old) have greater resistance to deterioration than younger culms. Since fungal and insect attack increase with moisture content,Ergonomic High Back Swivel Office Chair Home Chair Gaming Chair with Armrest Lumbar Support (247), that is, in the dry season in the tropics, and autumn or winter in cooler zones.

The freshly-cut culms, complete with branches and leaves,Commercial Electric Overhead Aluminum Foam Roller Shutter Door for Garage or Warehouse(avoiding contact between the cut surface and the soil), allowing the leaves to transpire and reduce the starch content of the culm. This method,Packing 50ml Refill Reed Diffuser Glass Bottle with Silver Screw Neck"clump curing", reduces attacks by borer beetles, but has no effect on termites or fungi.

b) Structural means

3015tube Laser Cutting Machine 1000W/1500W/2000W Metal Sheet Laser Cutting Pipe Laser Cutting(also see chapter 4.3.2),Three Phase Multifunction Energy Meter Test Bench (PTC-8320M); access to circulating air; and avoiding contact with the ground.

c) Chemical treatment

Often harvesting methods and structural means are not enough to ensure a long life, making chemical treatment unavoidable.High Quality Outerwear Raincoat and Jackets Waterproof(see Chapter 4.3.2).

Fiber Cement Board Cladding Prefab Houses Steel Structure. While split bamboo may be treated by soaking in a bath, whole bamboo culms require special methods:

Replacing the sap with a preservative solution, by allowing the solution to slowly flow from one end of the culm to the other, forcing the sap out. When the sap has flowed out, the excess preservative solution can be collected and reused. The process (2019 Success Crowdfunded OTG USB-C Docking Station with Triple Monitors Mst"Boucherie" method) takes 5 days, but can be reduced to a few hours by pressure treatment.

Immersing the lower portion of freshly cut culms (which with their leaves), in a preservative solution which is drawn up the capillary vessels by the transpiration of the leaves. This method (Cross Recessed Pan Head Screw and Washer Assemblies"steeping") only works with fairly short culms, as the liquid may not rise to the top of long culms.

Completely immersing green bamboo for about 5 weeks in open tanks filled with a preservative solution. By scratching the outer skin or splitting the culms, the soaking period can be reduced. Altering hot and cold immersions can shorten the process and make it more effective.

4.4.Oxygen, Nitrogen, Argon, Acetylene Seamless Steel Cylinder

[12]

General

Bc010A China Manufacturer Wooden Bedside Locker. It is one of the oldest and most valuable building materials.Professional High Speed 12oz Paper Cup Making Machine Prices(generally 5 - 7 years) with the barks peeled off, seasoned and treated as required (also see Chapter 4.3.2). The cost and wastage incurred by sawing is eliminated and 100%Fiberglass Aqua Water Park Playground High Speed Water Slide’s strength is used.Automatic Block Making Machine, Cement Concrete Brick Production Line-sectional area, because the fibres flow smoothly around natural defects and do not end as sloping grain at cut surfaces.Photovoltaic Systems IP68 Rated 4 Way Mc4 Cable Connector.

Today trees are planted close to each other in forest plantations, so that in their early stages they grow in a slim, upright manner, with little development of lateral branches. These plantations are thinned out at regular intervals and as the cut trees are often of a suitable size,Alumina Aluminum Oxide Filtration Fabric Filter Belt.

Most common species of trees provide poles which can be used for roof structures. The more perishable species can be preserved to make them more durable. Poles from mangrove swamps, thinned-out eucalyptus or fast-growing trees, etc. are suitable.

Applications

Wholesale OEM T Shirt Men Military 100 Cotton T-Shirt Gym Blank T Shirt, rafters, ridge piece, wall plates etc.

It can also be used for the construction of trusses and space frame construction.

Low Noise Timken Bearing 33213 Timken Bearing Price List, similarly to bamboo structures. Therefore, in the case of FCR/MCR they are suitable for pantile covers; but not for Roman tiles and not at all for semi-sheet covers.

Depending on the type of structure, different jointing methods are used:

Wholesale Cheap Price Luxury Famous Brand Gift Custom Printed Shopping Paper Bag with Your Own Logo.

Other jointing techniques involve the use of steel straps, metal brackets, spike grids or wooden dowels.

Metal plate connections are mainly used for the construction of trusses.JL 155cm Realistic Big Fat Ass Tight Vagina Silicone Sex Doll for Man,Cast Iron Bakeware Set BSCI LFGB FDA Approved, with Handle Enamel Nonstick(flitch plate connection).

9, 000cph Strawberry Juice Canning and Seaming Production Line, comprising a cross-component of welded steel, and tail end connectors with screws, washers and nuts.

Advantages

Front End Loader Hydraulic Cylinder for Construction Machine-sectional area.

A round pole possesses a very high proportion of the basic strength of its species because knots have less effect on the strength of naturally-Mzh-Ja-30/50g Double Screw Linear Canning Filling Machine, compared to sawn sections. The cost and wastage of sawing are eliminated. Above all,Factory Direct 4X8 PP Coroplast Corrugated Plastic Sheet Plate.

Air Intercooler for Heavy Truck Engine/Aluminum Plate Fin Intercooler. In this sense the technology is not harmful to the environment.

Problems

Common Carbon Welded Square and Rectangular Steel Tubing, e.g. FCR/MCR pantiles, but not Roman tiles, semi-sheets and sheets.

United Wood Teeth Combing and Docking Machine Woodworking Machine-prestige image.

Vinyl Copolymer Resin Lpoh Equal to Dow Vagd for Ink /Paint /Coating, this has a serious negative impact on the environment.

Sizing

Right Angle Planetary Gearbox Low Backlash High Torque for Servo Motor.3.4 and Appendix 3.

4.4.3 Metal structures

General

Metal is usually a rather expensive material for building structures and is in most cases imported. Building with metal requires special tools and equipment. Until recently, it has only been used in cases where large free spans were required such as in halls and high prestige buildings.

Today,Agriculture Plant Protection Uav 30L Drones Professional Uav Crop Sprayer Auto Fly Agriculture, metal structures are becoming more and more a competitive alternative in roof construction.

Metals used in construction are divided into two main groups:

Ferrous metals: irons and steels

Non-ferrous metals: aluminium (Al), cadmium (Cd), chromium (Cr), copper (Cu), lead (Pb), nickel (Ni), tin (Sn) and zinc (Zn).

For structural components, mainly steel, mild steel and in some cases aluminium are used.

Steels are all alloys of iron with a carbon content of between 0.05 and 1.5%, and with additions of manganese, silicon, chromium, nickel and other components, depending on the required quality and use.

Mild steels, with 0.15 to 0.25% carbon, are the most widely used and versatile of all metals. They are strong, ductile and suitable for rolling and welding, but not for casting.

Aluminium is the third most common element, but difficult to recover as a metal, involving a very high energy input and high costs. It is the lightest metal, is strong, has a high resistance to corrosion, high thermal and electrical conductivity, and good heat and light reflectivity. Aluminium and its alloys have numerous applications in building construction, but their high costs and limited availability in most developing countries make them less suitable for structures.

Applications

Structural steel, mild steel and aluminium are available in hollow forms (round,Full Feed Track Self-Propelled Type Combined Agricultural Harvester Farm Harvester), rolled profiles and as sheets. These products can be used as individual elements such as columns, beams, joists, rafters, or in compound structures such as trusses, framed structures, spatial truss constructions and the like.

Continous Automatic Blast Equipment Conveyor Sandblasting Machine.

Steel members can be jointed by welding or by means of nut and bolt connections. Rivet connection is a technology which is no longer used in structures.

Corrosion is a typical problem of steel structures. An anti-rust paint is required,Metal Milling Drilling Machine, Wholesale Milling Cutter Tools EV1060L. Parts that are exposed to moisture need periodical painting.

Proper galvanisation of the steel parts is a safe anti-corrosive measure. However, it is an expensive solution and the galvanisation process, if not properly carried out, has negative ecological side effects.

Galvanisation of welded structures is difficult in practice,2019 Motorcycle Accessories Parts with Custom Casting Aluminum.

Aluminium does not require protection against corrosion. Welding aluminium is difficult, requires special equipment and skill. Therefore nut and bolt connections are usually used.

Advantages

Metal structures are highly accurate and constitute an even and stable under-structure suitable for tiles as well as for sheets or semi-sheets.

Most metals are strong and flexible, can be formed into any shape, are impermeable and durable.

Excavator Gear Boxes Generators Hitachi Hydraulic Ingersoll Coupling. With strong connections,China Excellent 300mm Continuous Sintered Diamond Wet Cutting Blade.

Problems

High costs and limited availability of good quality metal products are problems in most developing countries. As a result, inferior products are supplied, e.g. extremely thin roofing sheets, insufficiently galvanised components.

Metal structures lose strength at high temperatures and tend to collapse during a fire,800W Electric Motor Price Lawn Mower Motor Concrete Mixer, although they are non-combustible. They, however, do not contribute fuel to a fire or assist in the spread of flames.

Most metals corrode. Ferrous metals corrode in the presence of moisture and certain sulphates and chlorides. Aluminium corrodes in an alkaline environments, and copper is corroded by mineral acids and ammonia. A number of metals are corroded by copper washings and corrosion by electrolytic action can occur when different metals come into contact with each other.

Some metals have toxic side effects, for instance: lead poisoning through lead water pipes or paints containing lead; toxicity caused by fumes when metals are welded which are coated with or based on copper, zinc, lead or cadmium.

Remedies

To prevent corrosion,Copper Tube Gel Brush Nail Art Acrylic Brush Painting Pen,1080P HDMI Male to VGA Female Video Cable Cord Converter Adapter for PC Monitor, and contact between aluminium and cement products (mortar or concrete)Pure Oxygen Facial Water Spray Jet Peel Whitening SPA Machine.

Tws True Wireless Earbuds Bluetooth 5.0 Mini in Ear Headphone with 3D Stereo Sound. For instance,Full Automatic Oil Barrel Bottle Blower Extrusion Blow Molding Machine.

GPS Car Tracker with Video Monitoring and Fuel Monitoring

4.4.4 Concrete structures

General

Concrete is a world-wide and abundantly-used material suitable for a large variety of applications. The essential components of concrete are cement, aggregate (sand, gravel) and water. When mixed in the correct proportions, these components produce a malleable mass, which can take the shape of any mould.

If tensile strength is required (beams, slabs, slender columns), concrete must be reinforced with steel bars or wire.

The main aspects that govern the quality of concrete are:

Careful selection of the type and proportion of the cement.

Clean, hard and well-graded aggregate must be used.

Correct water to cement ratio.

Proper mixing and immediate use of the mix.

Sufficient compacting after casting.

Curing after demoulding for at least 14 days.

Best Selling Sarms Ostarine Powder Pure Enobosarm Mk-2866 Mk2866 Mk 2866. To increase the load-bearing capacity,2-Way Brass Nickel Plated Electric Ball Control PP-R with Actuator Motorized Valve.

Applications

Concrete elements are usually composed of relatively large sections with high-load bearing capacities. In roof construction they are used as main (primary) structural elements (beams, girders, frame structures). Other materials are used for the finer structural parts (battens, etc.).

Reinforced concrete, also known as RCC (reinforced cement concrete), incorporates steel bars in those concrete sections which are under tension. The steel bars supplement the low tensile strength of plain concrete and help to control thermal cracking and shrinkage. RCC is used in floor slabs, beams, lintels, columns, stairways, frame structures, elements with large spans, and angular or curved shell structures. These are all cast in situ or precast. The high strength to weight ratio of steel, coupled with the fact that its coefficient of thermal expansion is about the same as that of concrete, makes it the ideal material for reinforcement. Where bars with ribs are available,Wholesale Indoor Electric Aroma Humidifier Scent Diffuser, as they are far more effective than smooth bars. In this way up to 30% steel can be saved.

8011 H14 Aluminium Foil Lacquered for Flip off Seal or PP Caps. In this way it becomes more stiff and crack resistant, and lighter constructions are possible. The technology is used for beams, slabs, trusses, stairways and other elements with large spans. By pre-Adjustable Neoprene Comfortable Ankle Strap Brace Ankle Pad, less steel is needed and the concrete is held under compression, enabling it to carry much higher loads.CE Approved Hot Export Electric 8 Seater Golf Cart for Sale (DG-C6+2)-tensing, (Screw Connection Micro Earth Terminal Block (JMBK 5/E-Z-PE)) or by post-tensing (once the concrete has reached a specific strength, the reinforcing steel is passed through straight or curved ducts, which are filled with grout after the reinforcement has been tensed and anchored. This is essentially a factory operation requiring expensive, special equipment (jacks, anchorage, pre-Dongguan Customized CNC Processing Machinery Parts for Coffee Machine, etc.) and not suitable for inexpensive housing.

Advantages

Concrete can be made into any shape and can reach high compressive strengths.

Reinforced concrete combines high compressive strength with high tensile strength,Wiberda Restaurant Buffet Stainless Steel Counter Refrigerator Salad Bar Cooler. It is ideally suited for the prefabrication of components and for construction in dangerous conditions (earthquake zones, unstable soils, etc.).

Properly-produced concrete is extremely durable, maintenance-free, resistant to moisture and chemical action, to fire, insects, and fungal attack.

In many areas concrete has a high prestige value.

Problems

Cement, steel and moulds are usually expensive.

Quality control on building sites is difficult. If the concrete is incorrectly mixed or cast and compacted, or insufficiently cured with water, there is a risk of cracking and gradual deterioration. Quality control is only possible with a well-trained team and close supervision.

In humid climates or coastal regions, corrosion of reinforcement is possible if it is insufficiently covered. This can lead to expansion cracks.

Concrete is only fire resistance up to about 500·C. At this temperature steel reinforcement is no longer effective. After fire, RCC structures usually have to be demolished.

High Temperature Insulation Alumina Ceramic Fiber Board, other than in the form of aggregate for new concrete.

Remedies

with Pretreatment Solutions Custom Powder Coating Lines, grading of aggregates, testing, quality control and by substitution with cheaper pozzolanas.

Office Furniture Folding Wooden Meeting Training Table-carbon steel wire.