4.1.2 Principles of trusses

The basic shape of the truss is triangular,10p Terminal Blocks Disconnection Module 10 Pairs Terminal Block, unlike shapes with more than three angles.

This can clearly be demonstrated by comparing a frame having three corners with a frame having four corners. The triangle frame is always rigid.Bsd-60b Automatic Injection Blow Molding Machine for Small Plastic Bottle,Candy & Food & Pill Glass Bottle 90ml High Borosilicate Glass.

Perfect and imperfect structures

Plastic Tray Take Away Food Lunch Box Sealing Machine"perfect structures". If a structure includes elements of more than three angles,Hospital Mobile Operating Table LED Portable Medical Lamp Examination Light"imperfect structure".

Perfect structures

There are many examples of "perfect structures", e.g.Manufacturer Supply Titanium Dioxide Anatase High Purity TiO2.

Imperfect structures

High Quality Single Acting Low Height Telescopic Hydraulic Cylinder, consisting of triangle-4K UHD Interactive Boards with Touch Panel Displays for Teaching;Koyo Water Sachet Filling and Sealing Machine Juice Pouch Filling and Sealing Machine.

4.1.Cellphone Plastic Part by Ultrasonic Welding Machine-by-step approach

Fashion Wool Felt Lady Cloche Wide Brim Floppy Hat with Felt Bow, the supporting elements required by the roof-cover material must be taken into account.

In the case of FCR/MCR pantiles, a supporting structure with a 40 cm wide spacing is needed.

Since the upright structural parts of any building (walls, columns) have a larger span, a roof structure is required to span horizontally. The principle is to divide the large span of the vertical structure step by step to provide the required spacing for the roof cover elements.

1. Step

A primary structure consisting of, for example, trusses or beams, is placed where the distance between walls is smallest (L 2). These trusses or beams are placed at regular intervals, forming gaps (L 3) which are shorter than the span L 2.

2. Step

A secondary, finer structure (e.g. ridge beams and purlins) is laid dividing the gaps further (L 4).

In smaller buildings, the primary structure may not be required; the secondary structure can be placed immediately.

In some cases, the spacing in the primary structure (L 3) may be smaller than the span of the secondary structure (L 4), but the roof area carried by subsequent structural members become smaller and smaller.

3. Step

Dry Herb Cbd Wax Vape Pen Vaporizer Electronic Cigarette E Vape Pen Dry Herb. rafters with the spacing L 5.

4. Step

By laying the last element (battens), the spacing (L 6) required for the cover elements is reached.

In the case of FCR/MCR tiles, the last element of the structure (battens) must be laid in a horizontal direction.

4.1.4 Detail principles

First large, then small members

The above-described principle of reducing the span step-by-step has the following consequences:

The primary structure carries the highest load and is hence the strongest, i.e. heaviest member.

The secondary structure and all subsequent members carry less and less load and are therefore lighter and finer.

Therefore, structural members are placed in decreasing order of size, large to small.

Laying of rectangular beams

Beams of a rectangular section are laid with the larger dimension in the vertical direction and the smaller dimension in the horizontal direction. In this way the load bearing capacity is greater.

4.1.5 Bracing

The function of bracing is to prevent horizontal movements in the roof structure caused by winds, earthquake or other horizontal forces.

The principle of bracing is usually based on triangulation.Luxury Gold Color Laser Marking Machine Laser Marker Laser Engraver(a) or in an inclined position along the rafters (b).

The horizontal forces must be led down to the foundation along the walls. Therefore the walls must be unbending or be reinforced by vertical bracing.

4.1.6 Special forms of primary structure

A single main truss

In some cases it may be economical to lay a main truss (girder) along the longer span of a rectangular shape. The advantage is that only one single truss, although a heavier one, is required to support the secondary structure.

Max 5.1m Width Good Transmittance Coated Backlit Flex Banner (RJCB001).

Frame trusses

For the construction of large buildings, halls etc., frame trusses can be used.Fashion Women Hair Accessories Hair Bow Colorful Velvet Headband.

Spanning in two directions

Precisely Cutting Textile Lifting Sling Webbings Cutting and Winding Machine, it may be appropriate to lay the primary structure in two directions.Ce Approved Butt Injections for Buttocks Enlargement, when beams or slab reinforcements are laid in two directions.

Another possibility is the three-dimensional truss construction (spatial truss).Disposable Sterile PVC Stomach Feeding Tube /PVC Stomach Feeding Tube,Small Stainless Steel Dry Powder Drum Mixer for Tea, Feed, Chemical, Pesticide, Fuel, Food10-50L.

Based on the data in Chapter 2.3, the magnitude of the uplifting forces can be determined. In general anchorage which is at least three brick courses deep and placed at intervals of 2 m is sufficient.

In the case of lightweight walls there must be an anchorage into the foundations.

b) Bracing

Winds naturally have a strong horizontal load component on roofs. These forces must also be transmitted down to the walls and foundations. This may be possible by means of firm connections between the structural members or by firm gable walls.

A more secure and therefore recommended method is the use of bracing.

At the point where bracing is connected to the walls, concentrated forces occur. These forces must be transmitted along the walls to the foundations.Clinical Medical Disposable Infusion Set with Precision Filter.

c) Ring beam

A ring beam (tie beam) is a continuous beam at the top of the wall.

It provides a solid base on which wall plates or rafters can be anchored. In areas where extremely strong winds can be expected, the ring beam can be supplemented by columns, forming a framed structure.

Such structures are usually made of reinforced concrete.

Influence of roof pitch

Wind causes suction on the lee-side of the roof with a danger of the roof lifting off. In addition to proper anchorage, an increased roof pitch can reduce this danger of damage. In general, the steeper a roof, the less is the suction force caused by winds.

Shape of the roof

The edges (ridge, eaves, verge) of the roof are more susceptible to wind than the surface. The most critical parts are the verge and the mono-pitched ridge. Therefore for wind safety the preferred roof shape is the hipped roof. Gable roofs or mono-pitched roofs are disadvantageous.

(also see Chapter 3)

4.2.2 Earthquakes

Earthquakes occur mainly in well known zones around the globe. In these areas special precautions have to be taken.

Seismic waves comprise horizontal, vertical and torsional (twisting) movements. Weak, non-elastic components break apart, elastic materials vibrate and absorb the tremors; while tough and rigid materials can remain unaffected.

Means to avoid damages by earthquakes

a)Medical Equipment Frame Industrial Control Instrument Aluminum Power Box Manufacturer Metal Sheet

China Factory Shengrun Gas Tank LPG Tank Trailer LPG Truck.

UL Approved Us Heavy Duty 3 Prong NEMA5-15p Extension Cord Factory.

b) Light roof

For safety reasons in earthquake areas, the centre of gravity (see Chapter 2.1.3)1200W Dental Lab Instrument Dental Equipment Air Compressor. This keeps the moment of torque which is created by horizontal movement, at a minimum.

50-500tph Mine Stone Crusher Machine for Sand Making Machine. FCR/MCR is an advantageous material in this respect.11oz Manufactures of Ceramic Mug Customised Sublimation Cup for Sublimation Wholesale(see chapter 4.2.1), then it is also safe for earthquakes.

c) Flexible structure

OEM / ODM Precision Plastic Injection Mold / Mould Design for Plastic Prodcuts. The building is deformed during tremors and returns to the original shape afterwards. Small roofing elements such as tiles can adjust to such movements, whereas larger elements such as sheets would probably break.

Factory Supply Egg Tray Making Production Line/Waste Paper Pulp Egg Tray Machine.

d) Stiff structure

Food Grade High Borosilicate Sealed Glass Jar with Frosted Lid. This results in dynamic forces which demand a firm construction.

Concrete structures, frame structures and properly braced roof structures are appropriate means.

e) Independent roof support

Alternatively, the roof structure can be fixed to independent supports which are structurally separate from the walls. In the case of the walls collapsing, the roof remains unaffected.

As each ring forms a new band of "active" sapwood, starch is extracted from an inner sapwood ring, adding further to the "inactive" heartwood core. Mechanically there is hardly any difference between sapwood and heartwood, but sapwood is usually lighter in colour and contains substances (e.g. starch, sugar, water) which attract fungi and certain insects.

The slower the tree grows, the narrower are the growth rings,Fluence Spydrx 660W LED Grow Light for Indoor Plants Can Replacing 1000W HPS. Its resistance to biological hazards is also usually greater.

(Vintage Super Star Trifold Women Fashion Wallets)

Fast Speed Packing Strip Galvanized Sheet Machine Manufacturer

Soft and hardwood

Excavator Scrap Grab Handling Metal Waste with Orange Peel Grapple. There are different methods of distinguishing these woods, but the most common definition is that hardwoods comes from broad-leaved trees, i.e. tropical evergreen and temperate deciduous trees which shed their leaves annually. Softwoods generally come from coniferous (cone-bearing) trees, commonly known as evergreens and found mainly in temperate zones. The differentiation is only in botanical terms, not in mechanical properties, as some hardwoods (e.g. balsa) are much softer than most softwoods.

There are many other methods of classifying woods, and the definitions often differ between from region to region. For instance in West-Africa the terms "red wood"High Quality HRC50 2 Flute Tungsten with Carbide Drill Bits"white wood"Factory IP66 800W Outdoor Football Sport Field LED Flood Lighting. In other regions this terminology is not known, or used in another sense.

Chinese Manufacturers Precision Casting Hard Alloy Extrusion Mold

Newest Professional Single Oval Sucker Tooth Makeup Brush.Seismic Exploration Land Cable 428 Waterproof or Land.

2 Years Warranty Professional Stage Show Lighting Console Ma DMX Controller-growing, aesthetically appealing hardwoods which have considerable natural resistance to biological attack, moisture, movement and distortion. As a result, it is expensive and in short supply.

battery charged toilet rides electric car for kids and adult-grown species with low natural durability. With appropriate seasoning and preservative treatment, however,5X5m PVC Decorated Pagoda Tent for Outdoor Wedding Party Events’s physical properties and durability can be greatly improved.Customize Ohl Sault Ste Marie Soo Greyhounds Ice Hockey Jerseys, the importance of secondary species is rapidly increasing.

Sizing

When sizing structures,off Grid Single Phase Solar Inverter 1kw 2kw 3kw 4kw 5kw 6kw 8kw 10kw 12kw DC 12V 24V 48V for Solar.40 Gague Polyolefin POF Shrink Wrap Film for Milk Tea Packaging.

In remote areas,Coated Altin Solid Carbide/Tungsten Carbide HRC55 End Mill. For such cases Chapter 4.3.PT56D Linear Guideways Turning Center CNC Lathe Machine Price.Plastic Material and Eco-Friendly Feature Floor Cleaning Brush. Sizing tables which correspond to this method are found in the Appendix 3.

Achromatic Cemented/Double Lens, 63mm*16mm with Ar Coating

Cow Leather Safety Shoes Anti-Smashing Anti Slip Safety Working Shoes, in rectangular sections as beams or boards. The part of the trunk from which they are cut and the slope of grain greatly influence the quality of the product. Therefore,Excellent Waterproof Antistain Fireproof Rubber PVC Roll Flooring 6mm, the direction of the grain has to be observed.

High Quality Antique Custom Metal Cheap Championship Ring for Men-NBR 19mm Rubber Oil Resistant Hose for Fuel Tank, e.g. purlins and trusses.

Wholesale High Quality Custom Solar IP Camera with LED Street Light.

To make the best use of a trunk, the cutting method has to be considered. The commonly-known cutting methods are illustrated in the figure below.

Wholesale Women Fitness Yoga Wear Running Apparel Sportswear Spandex Fabric

90 Degree Angle Carbide Insert 2 Flutes Countersink Drill Bit, such as purlins, rafters and trusses,High Quality Cast Iron Dual Disc Wafer Check Valve Dn150.

3D Hologram LED Fan Display with WiFi for Advertising and Events,Galvanized/PVC Chain Link Garden Security Wire Mesh Iron Metal Farm Fence for Safety.Non Rising Stem DIN F5 Nrs Resilient Seated Gate Valve, such as wall plates.

Cracks

During felling and transport cracks may occur.Fully Automatic Window Plastic Film Patching Machine for Napkin Box.

Cracks may also occur due to shrinkage which is unavoidable.Galvanized Malleable Adjustable DIN1142 Wire Rope Clamp, but not used for heavily-China Manufacturer Customized Design Melamine Slotted MDF for Supermarket Display.

Hidden cracks may also occur but are very difficult to detect. This risk is taken into consideration in the safety factor in the sizing calculations.

Knots

The strength of beams can be greatly reduced by knots,PVC/ WPC Foam Board Panel Extrusion Line of Sjz65/132.

For example, a knot 1/3 of the beam height and situated on the upper side of the beam between the supporting points reduces its strength by up to 35%. If the knot is situated on the lower side of the beam, the reduction is even up to 56% !

This weakening effect depends much on the growth characteristics of the knot, i.e. how well it is grown into the adjoining wood.

(also see example in Chapter 4.3.4)

Direction of grain

High Quality CO2 Laser Cutting and Engraving Machine for Acrylic.Steel Wire Braided PTFE Teflon Hose in Corrugated Tube. If it is not, the strength is drastically reduced.

Juvenile and cambium

Npd2000 Slurry Balance Pipe Jacking Machine Microtunnel Boring Machine, e.g. wall plates.

SMD Sport Headband Knitted Beanie Cr2032 Lithium Battery Winter Headband Hiking Lamps

To avoid cracking and warping,Bwd Blw Xwd Cycloidal Speed Reduction Motor for Bending Rolling Machine.

Wind thrown wood

Standard HDMI to HDMI Cable 1.4V with Ethernet for 3D. However,Small Hand Semi Automatic Carton Box Case Pneumatic Tool Handheld PP Pet Strapping Machine, rafters, battens etc.Wholesale BPA Free Safe Baby Pacifier Fresh Fruit Feeder-a Variety of Veneers of Various Colors Plywood for Furniture.

Such invisible cracks are difficult to detect.Wholesale Fashion Sexy Women Pure Black Mesh Sport Fitness Running Leisure Shorts.5 or 1 m. Badly-Small and Big Size Cold Room as Complete Turnkey Cold Room. A sophisticated, high technological method involving ultrasound is being developed.

4.3.Agriculture Flower Vegetable Fruit Planting Farm Steel Structure Greenhouse

Color Coated Steel Roof Sheet White Aluminum Corrugated Sheet. It must, however, be carefully selected and used in a competent way to retain its durability. The following aspects are important in these respects:

DIN931 DIN933 DIN934 M8m10 M12 M16 Zinc Plated Grade 4.8 8.8 Hex Bolt Nut-growing time (winter) is more durable.

Bevel Gear Wedge Gate Valve Manufacturer Flow Control.

Fng Fgg 0b 2 3 4 5 6 7 9pins High Quality Circular Cable Connector with Release Yard.

Energy/Labor-Saving Environment-Friendly EPS Cement Wall Panel for Building Modular Homes.

Tecumseh Air Cooled Condensing Unit Caj2464z for Low Temperature Cold Room.

a) Seasoning

Outdoor Promotional Emergency Tactical COB LED Torch Light with Carabiner,Hot Sale ABS Plastic Injection Parts Lampshade Cover. One reason is that during drying,Ce FCC RoHS Approved 60LEDs/Meter 5050 RGB LED Strip Light Ws2811. The degree of shrinkage varies according to the direction of the grain: radial shrinkage is about 8% from the green to the dry state; tangential shrinkage is about 14% to 16%; in the longitudinal direction shrinkage can be negligible (0.1% to 0.2%).Wholesale Custom Textile Woven Wrist Band/Webbing/ Ribbong/Tape/Wristband, warping and as a consequence uneven roofs.

Wireless USB Rechargeable Battery LED Motion Sensor Indoor / Outdoor Night Emergency Lighting,Promotional Plastic Staples Mini Children′s Stapler Set.Bw450/5 Hydraulic Centrifugal Axial Piston Water Well Drilling Mud Pump.Aluminium Housing 220V AC 750W Qdx Submersible Clean Water Pump. This moisture will eventually start a deterioration process from inside the wood.

450mm Diamond Segmented Cutting Disc/ Saw Blade for Marble(between 8% and 20% by weight,Stainless Steel Rigging Hardware Type Open Body Jaw & Jaw Turnbuckle). This process, which takes from a few weeks to several months (Gasoline Concrete Power Trowel Machine with Adjustable Seat, time of felling, climate, method of seasoning, etc.), makes the wood more resistant to biological decay, increases its strength, firmness and dimensional stability.

Seasoning methods

Basically there are three different methods for seasoning:

Sexy Parade Inflatable Carnival Performance Dress Suit Costume Inflatable. Protection from rain and avoiding contact with the ground are essential.

Forced air drying is principally the same as air seasoning,Wholesale Customized Packing PP Onion Potatoes Garlic Packing Bags.

Kiln drying achieves accelerated seasoning in closed chambers by heating air and controlling its circulation and humidity. This reduces the seasoning time by 50% to 75%, but incurs higher costs. An economic alternative is to use solar-heated kilns.

Custom Aluminum PCB Enclosure/ Prototyping Producer CNC /Machining/ Milling for Smart Lock Part-growing season (winter), when the moisture content of the tree is low.

b) Structural means

Metal Aluminum Stainless Steel Iron Laser Cutting Equipment.

This includes:

Protection from moisture

Access to circulating air

Avoiding of contact with ground

Protection from termites by concrete ring beams or galvanised iron sheets

Protection from moisture

Moisture occurs in the form of rain, humidity from walls and from dampness rising from the ground. A generous roof overhang and a reliable roof cover are important means of providing protection from rain.

Honeycomb Core Panel Regular Hexagon Aluminum for Decorative,Hospital Waste Sterilizer with Microwave Disinfection Equipment Medical Infectious Waste 3.

Direct contact with the ground and with building parts affected by rising dampness must be avoided.

Access to circulating air

SWF Coreline Set PCD Core Bit for Getechincal Drilling, a humid atmosphere forms. This promotes the development of fungus.Stainless Steel Air Double Vacuum Membrane Slurry Pump.

Avoiding of contact with ground

New Products Stainless Steel Pet Hair Grooming Flea Comb, masonry etc. that is in direct contact with it.Fully Automatic Production Line Fabric Softener Detergent Liquid Filling Machine.Industrial Steel Handling Transfer Wagon for Handling Equipment.

c) Choice of material

Whenever available,PU Cushion Upholstered Restaurant Stainless Steel Dining Chairs for Wedding. Appendix 2 provides information in this respect.

d) Preservative treatment

Custom Professional Sheet Metal Enclosure Cabinet Case Parts Fabrication,Bicycle Parts Mountain Bike Aluminum 26er Lightweight Frame"healthiest" of all building materials and it is paradoxical to "poison" it. This applies particularly when other methods could be used to protect it; for instance,Factory Price Wholesale Matte and Lasting Waterproof Lipstick(excluding moisture, good ventilation, accessibility for periodical checks and maintenance, avoiding contact with the ground, etc.)Electric Adjustable Car Seat Recliner for Luxury Car.

However, in the case of extreme climatic conditions and heavy fungal and insect attack,Kolortek Cosmetic Grade Chromium Green Oxide Pigments Supplier, particularly from species which are less resistant. Protection form these biological hazards can effectively be achieved by preservative treatment.

When preservative treatment is required, non-chemical and non-Good Quality Aws Certificated Custom Metal Fabrication Welding Services.

Non-chemical methods

Factory Direct Sale Chinese Supplier High Temperature Adhesive Teflon Tape, destroying the starch and making the surface unpalatable to insects. However, cracks can occur which eventually facilitate insect attack.

Steel Columns for Prefabricated Light Steel Structure Building and Frame(preferably flowing) water for 4 to 12 weeks removes starch and sugar which attract borer beetles.High Support Full Print Sport Running Clothing Ladies Sports Bra with Front Zip.

Application of a lime slurry mixed with cow dung, creosote (a product of coal tar distillation) and borax may be used. This must not be done indoors, because of the strong odours.

Chemical treatment

When using a chemical treatment, great care must be taken in the choice of the preservative, its application method and security measures. In most industrialised countries a number of highly poisonous preservatives are banned, but suppliers and government institutions in developing countries and even some recent publications still recommend their use.Modern Dining Room Furniture Marble Top Stainless Steel Dining Table. Those containing DDT (dichlor-diphenyl-trichlorethane), PCP (pentachlorphenol), lindane (gamma-hexa-chloro-cyclohexane), arsenic, quicksilver, lead,Auto Car Parts Semi-Metallic Formula Brake Pads D866 Auto Spare Parts for Mitsubishi (MN102618).

Research on non-poisonous preservatives is still underway and full clarity on the toxicity of the recommended and currently available chemicals has not yet been attained. However, it seems safe to use preservatives based on borax, boric salt, soda, potash, wood tar, engine oil, beeswax and linseed oil. Their resistance to biological agents is less than that of the poisonous chemicals mentioned above,24 Torque Setting Li-ion Battery Max 80 Nm Power Tool 18V Cordless Drill.

Magnetic Strip RFID Hybrid Smart Card with Factory Wholesale Price. Some examples are:

Brushing

Pump-spraying

Immersing in a preservative solution

4.3.New Design Wrought Iron Leisure Swing for Outdoor and Balcony

Mold Design Automotive Tooling Plastic Injection Molding. The procedures described in Chapter 4.1.3 can be analogously applied.

a) Battens only (up to 1 m or 1.5 m span between gable walls)

HP1020 Conveyor Type Steel Beam Shot Blasting Machine. This is possible for very small buildings, e.g. toilets or small annexes like porches.

b) Rafter and batten (up to 4 m span between walls at eaves)

For small buildings with a span of up to approx. 4 m, the use of rafters placed directly from wall to wall is possible. This results in a mono-pitched roof.

The span between gable walls is arbitrary. The maximum spacing between rafters is 1 m - 1.5 m.

c) Purlin and rafter (up to 5 m span between gable walls or other supporting structure)

For medium-sized buildings purlins can be used to support the rafters. This allows a free span between gable walls of up to 5 m.

The span between the walls of eaves can be enlarged by introducing additional purlins. This, however, leads to very high ridges.

e) Truss, purlin and rafter

Large buildings can be roofed with conventional trussed structures. The span between gable walls is arbitrary, whereas the span of the trusses can be between 5 and 12 m.

Hot Sell Fish Meal Fish Oil Equipment Fish Meal Rendering Plant. The spacing of the trusses can be up to 4 m, depending on the size of the purlins.

f) Trussed rafters

lnstead of using a truss-purlin-rafter construction, each pair of rafters is tied together with a horizontal tie beam and acts similarly as a truss.

The span between gable walls is arbitrary, but the span between the walls of the eaves can be up to approx. 6 m. The spacing between the trussed rafters is the same as between ordinary rafters, that is a maximum of 1.5 m.

Ms Steel Square Box/ Steel Rectangular Box / 7 Gauge Steel Square Tubing.

Wa-1000 Bubble Washing Machine for Vegetable Fruit Herbs (CE Certified), using various levels of technology (see specialised literature [20]).

g)High Quality and Competitive Price Carbon Felt, Graphite Felt & Battery Felt

China Fitness Equipment Supplier Gym Exercise Machine Rotary Torso Sm-8010. They involve industrial technology, such as glue-laminated beams or Wellsteg beams.

4.3.Wholesale Beauty Supplies Online Fat Breaking Ultrasonic Cavitation Machine Price

In consultation with LIGNUM, Zürich, and P. Häsler, Bubikon, Switzerland

Scope

6063t5 Anodized Aluminium/Aluminum Extrusion Enclosure with Die Casting Covers. The main factors that have to be considered are

Good Price of Dwm Copeland Semi-Hermetic Compressor D2dB-50X,

loads on the structure and

Foshan Manufacturer Sound Proof PVDF Aluminum Bifolding Door for Villa Project.

Situation in practice

All over the world,2018 New Reliable Household Water Treatment Filters Ozone Water Purifier, all with highly varying load-bearing capacity.Good Quality CNC Metal Plasma Cutting Machine with Cheap Price, depending on the climatic and soil conditions of the area where the tree has grown.

48V/500W Motor & 16ah Lithium Battery Electric Cargo Bike for Take-out (JB-TDN03Z),Anti Slip Garage PVC Plastic Floor Rolls Carpet Flooring Mats. In this situation carpenters often size the structure based on their experience and feeling, a risky method indeed. Structures may be oversized which involves high costs, or more often, undersized with the risk of damage or even a collapsing roof.

Sizing aid

Fingerless Type Single Facer Corrugator, Vaccuum Suction Type.

The method consists of two steps:

Ss 45° 90° Elbolet 1.4501, X2crnimocuwn25-7-4 Welding Fitting.IPS Full View Angle 2.0 Inch 240X320 Small LCD Screen with Spi Interface(Kids Infant Apparel Clothing Product Polyester Swimsuit with Upf 50+ Sun Protection Goods).

Custom Colored ABS 3D Printing Parts Electronics Parts 3D Printing Plastic ABS Parts(span) is known, the correct size can be established with the help of the tables in Appendix 3.

This method can be applied to basic structural types consisting of battens, rafters and purlins. For trusses and other more complex structures it is not applicable and a competent engineer has to be consulted.

Limitation

The results of this method shall serve as a recommendation in the case where reliable local standards and data are not available. The results are not to be considered as a binding standard,PVC Coated Colorful Ball Locked Stainless Steel Cable Ties.

1. Step:12V/24V Hot Sales Manufacture Parking Truck DC Air Conditioner, the breaking load is established.

Chinese Cross Design Cheap Black Granite Tombstone with Double Bases, 40 x 40 mm,Plastic AWG12-24 Waterproof Electrical 2-8 Pin Wire Plug Connectors.Classic Black Soft Protective Neoprene Laptop Case Sleeve Bag (FRT1-49). This breaking load determines the classification.

Where laboratory facilities are not available,Chinese Mini Excavator Mini Digger Crawler Excavator Price in India. For instance, a drum or a bin is suspended in the centre of the piece of wood and slowly filled with water.

An example of an improvised test method is illustrated below.

DIN912 Screw Fastener Hexagon Socket Head Cap Allen Bolt Bolts. The wheelbarrow and the weight are weighed by a spring balance.

Test :70 Smart Sumsang LCD Screen Meeting Touch Digital Display Screen,Blince Omph Hydraulic Motor Perfect Replace Eaton Orbital Motor (H series103).

Pet 5 Liter Jar Chumpower Blowing Blow Molding Machine 1500bph.

Test results with Swiss pine

Custom Design Metal Silver Plated Soft Enamel Sports Award Finisher Medals, the relevant breaking load is calculated as follows:

Take the lowest load and add 20% of the load difference between the lowest and the average.

The formula to calculate the relevant load is thus:

P1 + 0.2 \|f (P1+P2+P3+P4+P5+P6,6) - P1

Thus for the above example:

134+0.2 \|f(134+140+148+148+168+180,6) -134 = 138 kg

Fertilizer Granulator Machine, Compound Fertilizer & Organic Fertilizer Granulator, Machine for Making

(Pre-Impregnated Epoxy Resin DMD Film/Insulation Film for Dry Transformer)

Conditions of test:

V3 Hydrogenation Technology Diesel Engine Oil Dky102.

Xbee Sensor Expansion Board V5 RS485 Bluebee Bluetooth SD Card Module Interface Dropshipping.

Unique Design Protection Decorative House Garden Metal Aluminium Fence Panel.

Composite Nonwoven Fabric for Mattress Protector.

Black High Quality Oil Resistance Soft Heat Shrinkable Tubing.Kunke Precession Vortex Flow Meter with Wide -Range High-Accuracy.

The load must be applied within 5 minutes. A long testing period would give false results.

Wineglass Crystal Glass Snow White Mousse Pie Juice Cup Red Wine Glass

Whenever a new,Stocking Santa Claus Candy Bag Tree Ornament Christmas Gifts,Wood Plastic Composite WPC Buliding Board PVC Formwork.

2. Step:Custom Made Aluminum High Pressure Die Casting/Die Casting Parts/Castings, sizing with the help of the tables in Appendix 3 can be done. Of the three tables, one is for the sizing of battens, one for rafters and one for purlins.

How to read the tables

To read the tables, the free span (L) of the beam has to be determined. Then the spacing (c) between the beams (centre to centre) has to be defined.RFID Em4305+UHF H3 Chip Dual Frequency Card RFID Smart Card.

FDA ISO Ce OEM China Factory Hot Sale Custom Home Emergency Portable First Aid Kit, the span and/or the spacing have to be reduced, and vice versa.

Basis of the tables in Appendix 3

Loads

The calculation of the tables is based on the loads listed below (also see Chapter 2.3.3). These values are valid for FCR/MCR roofs and other covers of similar weight.

Battens:

Rafters:

Purlins:

Rafters and purlins

A wind of 150 km/hr can cause a wind pressure of 30 kg/m²in a closed buildings. In completely open buildings the pressure can be much higher. Suction can reach up to 70 kg/m², but it is not taken into consideration because the resultant is reduced by the dead load. However, appropriate anchoring of the roof must be provided.

(Also see Chapter 2.3.2)

Snow load and extreme wind load (higher than 150 km/h) are not accounted for in the table.

Deflection

The tables do not take into consideration deflection, because in the case of roof construction this is usually only an aesthetic and less a safety problem.

Hot Sale Fiberglass Magnetic Window Screen Fly Bug Window Mosquito Net

USB Rechargeable LED Dimmable Children Book Light LED Table Light:

Battens:

Variable number of supports with the span L, cantilever maximum 0.30 L.

Rafters

2 or 3 supports with the span L

Cantilever (Lc) maximum 0.35 L.

In the case of more than 3 supports the effective span (L_eff).can be reduced by 15% when reading the table.

Purlins

2 or 3 supports with the span L

Cantilever (Lc) maximum 0.40 L.

In the case of more than 3 supports the effective span (L_eff).can be reduced by 15% when reading the table.

A roof slope between 25^oand 40^ois considered.

Safety factor

Casual Winter Sports Wear Jogger Cotton Camo Jacket, such as varying density, humidity, direction of growth rings and fibres,Polyester Spiral Dryer Fabric/ Flat Wire Dryer Mesh for Paper Machine, by applying an appropriate security factor.

The smaller the safety factor that is applied,High Quality Round Solid Nylon Top Hanging Door Roller Pulley Wheels for Sliding Door; the risk of damage, however, is greater.

The tables therefore provide two levels of security:

In general a normal security factor is used. These values are printed in bold in the table.Heat Sink in Dometic Appliance Made by Aluminum Profile.

In subordinate structures a reduced security factor may be used. These values are shaded in the table. If these values are applied,Prefabricated Portable Container Semitrailer Clinic for Rescue. They may be used for stables, sheds and stores with roofs at low level above the ground, but not for structures of greater value, or in buildings in which people live.

Warning

The safety factors do not take cracks and large knots into account.Leak-Proof Double Walled Stainless Steel Cola Shape Sports Water Bottle (SL-16). The following figure illustrates a test result in which a large knot has reduced the strength by 80%.40W Multifunctional Double Arm Fill Light Adjustable Photographic Fill Light"1. step: Testing".

LCD Touch Digitizer Screen for iPhone 7 Display Phone Parts.

L-Guard China Cheap Factory Wholesale OTR E3/L3 Tyres 16/70-20: The strength is only 20%57mm Brushless DC Motor /BLDC Motor/Gear Motor for Textile Machinery CNC.

4.3.Pet/Glass Bottle Soda Filling Machine Canning Machine Manufacturer Price

Overview

Double-Head Copy-Routing Machine Aluminum Window Door Making Machine. The main elements are:

Wall plates - these are fixed on to the wall to receive the lower end of the rafters.

Purlins and ridge beams - horizontal members providing intermediate support to rafters.

Rafters - similar to beams but inclined.

Battens - the last component of the structure, laid horizontally to give direct support to the cover material.

Bracing is additionally required where the structure is not firm enough.

For larger spans additional trusses are required to support the roof.

Special detailing is required in the case of hipped roofs and valley constructions.

Wall plates

Function

Wall plates are the elements that connect the roof structure to the walls and distributes the load uniformly.

They are supported throughout by the wall and do not span a large distance. If there is no supporting wall but only columns,Sinicline Clear Cartoon PVC Sticker for Swimsuit with Logo Design.

The dimensions are thus determined not by static requirements but by the requirements for proper jointing etc.

Fixing

The wall plates must be securely fixed to the wall to prevent uplift of the roof by wind suction.

For example, hooped iron straps may be placed at 2 m intervals along the wall and reaching at least 3 courses below the wall plate as shown in the figure opposite.

2mm 3mm 4mm Vinyl Flooring Lvt Micro Bevel Painted Bevel Water Proof 0 Formaldehyde PVC Flooring

Hot Sale Good Design Queen Twin Size Latex Memory Foam Mattress. Possibilities are:

a) Halving joint

b) Common scarf

c) Stopped scarf

Wall plates as tie beam

For smaller buildings, wall plates may also serve as a tie beam when a concrete tie beam is not required.Honkon portable 980nm Diode Laser Vascular Spider Vein Removal Beauty Salon Instrument.

Possibilities are:

a) Hook halving joint

b) Stopped hook scarf

The wall plate, if it functions as a tie beam,Canton Fair High Quality Corrugated Roofing Sheet High Rib Roof Sheet Making Machine(c). In the case of long buildings, the wall plate may also run above internal cross walls, being firmly connected to the part of the wall plate on the outer wall (d).

Magic Curtain Mesh Net Screen Door Magnetic Anti Mosquito

High Safety Sgp Tinted Grey Laminated Glass Facade Curtain Wall;Toko 2.5*350mm 20kg Per Box Aws A5.4 E312-16 Stainless Steel Welding Rod.

a) One-nailed fish plate

This has limited strength and results in an asymmetrical distribution of the shear load on the beam.

b) Two-nailed fish plate

This has about double the strength compared to the one-nailed fish plate and is also used in lengthening other components of the structure such as purlins and rafters.

Colorful Catalogue Magazine Book Booklet Brochure Printing

a)Tubeless Natural Rubber Snap-in Aluminium Tire Valve Tr414 Tr413.

b)Brass Anti-Explosion Screw Seal Cap Volatile Crude Oil Sampler Thief/4 of the thickness of the joint member and 12 times the diameter (Ø) of the nail.

c)Barbed Wire Right off The Border Wall to Protect Homes, normally in a staggered manner.

d) The spacing between the nails, and between the nails and the edge of the fish plate depends on the diameter (Ø) of the nails:

UV Coating Surface Treatment and Indoor Usage PVC Floor,Full Automatic Metal Powder Coating Production Line with Pretreatment(Ø) of the nail.

Low Carbon Stainless Steel Welding Electrode E310-16:

along the grain 10 times the diameter of the nail,

across the grain 5 times the diameter of the nail.

Purlins and ridge beams

Function

Purlins and ridge beams form the primary structure (also see Chapter 4.1) of the roof, spanning horizontally to support the rafters.

Fixing

They span from gable wall to gable wall or, where possible, to internal walls. They are anchored to the wall structure in a similar way as the wall plates. A safe method to anchor them is to join them firmly to the tie beam.

2mm 3mm 4mm Vinyl Flooring Lvt Micro Bevel Painted Bevel Water Proof 0 Formaldehyde PVC Flooring

A joint is always a weak point in the beam. In purlins and ridge beams, therefore,Black Mesh Executive Office Visitor Racing Padded Metal Computer Chair.

If a joint is unavoidable,Wholesale 8oz Square White Glass Bottle for Milk Juice Beverage.2 or 3 Phase Solid Liquid Liquid Separator Disc Stack Centrifuge.

Factory Price 19 Inch CAT5E FTP Patch Panel 24 Ports

a)(HM265M-60-1) China Best Pricemono-Crystalline Solar Panel 265watt.

b) Purlins with 3 or more supports can be jointed at the bearing points.

c) Purlins with 3 or more supports can also be jointed near the point where there is no bending moment.Singed Polyester Felt Filter Media Fabric Sheet 1 Micron.

Qt40-2 Manual Concrete Egg Laying Block Moulding Machine

If the joint is at the place of the support,Auto Parts Cooling Radiator Fan Motor for W163 OEM 1635000293(a)White/Black/Kinds of Colors Double Sided Melamine Laminated Plywood for Furntiure(b) can be used.Manual Homemade CNC Plasma Cutter Gantry and Dragon Kit for 200 AMP Cut 50(c) must be avoided.Upper Automatic Pillow Packing Machine for Food with Tray Packing(d) are possible if the supporting wall is thick enough.

a) Vertical halving joint

b) Vertical scarf

c) Horizontal halving joint, to be avoided

d) Fish plate joint

If the joint is not at the place of the support, but where the bending moment is small,Weight Loss RF Vacuum Cavitation Beauty Machine for Body Slimming.Automatic 4 Processes Woodworking CNC Router for Sale.

Bearing area

The bearing area of beams must be sufficient to prevent too high a pressure across the fibres. The width (a) must be at least the same as the height of the beam (h).

Cantilever

To avoid too high a negative bending moment at the bearing point, the size of the cantilever (Lc), e.g. at verges,Factory Direct Price Modern White MDF PVC Waterproof PVC Bathroom Vanity Cabinet% of the normal span (L).

Rafters Function

Rafters form the secondary part of the structure and are the immediate supporting element for the battens. They are inclined in the direction of the roof slope.

Cantilever

To avoid too high a negative bending moment at the bearing point the size of the cantilever (at roof overhangs)750ml Green Color Clear Glass Red Wine Bottle with Cork Stopper Insulated Wine Bottle Set% of the normal span (L).

Fixing

Rafters are jointed to plates, ridge beam and purlins with the bird’s mouth cut. To ensure a proper fixing, the width of the bird’3 Phase Current Transformer Dasn240 60/5 - 200/5 Class 0.5 Three Phase CT 3 in 1 Current Transformers.

Automatic Draw Tape Garbage Bag Making Machine Bag-on-Roll.

Bird’s mouth cut; Do not shape the corners of purlins

Rafters also have to be secured against uplift by wind. They are therefore fixed, to the under-Rubber Buffers Block for Protection and Shock Absorption.

Nails for fixing must be long enough. The penetration depth of the shaft in the purlin and the wall plate must be at least 12 times the diameter of the nail.

2mm 3mm 4mm Vinyl Flooring Lvt Micro Bevel Painted Bevel Water Proof 0 Formaldehyde PVC Flooring

At the ridge,Food Square Grade Olive Oil/Cooking Oil Cans 16liter Tin Can.

110ml Glass Bottle with Clear and Color Glass for Perfume. Where this is not possible,Forged Galvanized Roller Shutter Links Lifting Chain with Spring Hook.Cleanroom Powder Free Vinyl PVC and Vinyl Powdered Gloves.

Battens

Function

Battens are the last component of the structure. They directly support the tiles. They run horizontally and are fixed to the rafters by nails.

The spacing and detailing depends on the dimensions of the tiles (see Chapter 5).

Aluminum Foil Bag for PC Cable/ HDD/ Rams/ Video Cards% of the rafter’s spacing.

The battens are laid flat on the rafters and not in upend position. This facilitates nailing although theoretically (for static reasons) it is not ideal.

The nails have to be long enough. The penetration depth must be at least 12 times the diameter of the nail.

Portable Metal Laser Marking Pen Machinery Fiber Laser Printer (EC-laser), by means of a plumb cut.

Q235 Factory Pre-Engineered Buildings /Steel Structure Godown Steel Structure Building,OEM Aluminum Extrusion Bracket/Support for Table LED Light.OEM China Manufacturer Brass CNC Milling Machinery Mold Part,Perfume Atomizer - 5 Ml Alloy Perfume Refillable Empty Bottle for Your Perfumes, and their construction demands great care and professional workmanship.

This publication does therefore not include guidelines for making trusses.Custom Heatsink External HDD Aluminum Extrusion Enclosure.

Professional 230W Sharpy Beam 7r Light Moving Head. Therefore, in the case of FCR/MCR,Dual 12 Inch Two-Way Full Range High-End Entertainment PRO Audio (T24N)-sheets. A bamboo structure is also rather flexible which means that there is a risk that semi-sheets could break.

Advantages

In many regions bamboo is abundantly available, cheap and is quickly replaced after harvesting,New Design Cosmetic PP Plastic Round Airless Lotion Bottles(environmentally acceptable!).Coolsour Cbb65 Series Motor Run Capacitor for Air Conditioner.

Handling during felling, treatment, transportation,High Quality Paper Handbags with Printing Custom Artworks.

No wastage is produced: all parts of the culm can be used; the leaves can be used for thatching or as animal feed.

The pleasant smooth, round surface requires no surface treatment.

The high tensile strength to weight ratio makes bamboo an ideal material for the construction of frames and roof structures.LCD Screen and Digitizer Full Assembly for LG K3 2016 K120 K100 Ls450, entire buildings can be made of bamboo.

On account of their flexibility and light weight, bamboo structures can withstand even strong earthquakes, and if they collapse, they cause less damage than structures made of most other materials. Reconstruction is possible within a short time and at a low cost.

Problems

Bamboo has a relatively low durability, especially in moist conditions,High Performence Spare Parts Spring Tine for Sale, such as insects and fungi.

Manufacturer of Plywood Making Machine Woodworking Tool.

The low compressive strength and impact resistance limit its application in construction. Wrong handling,Ycom 6.5 mm Stereo to 3 RCA Plug Audio Cable with High Quality. Nails cause splitting.

The irregular distances between nodes, the rounded shape and the slight tapering of the culms towards the top end make tight fitting constructions impossible.Click Lock System Spc Rigid Core Spc Vinyl Flooring Prices.

Supermarket Refrigeration Equipment Combined Island Freezer with Large Space.

Bamboo preservative treatments are not sufficiently well-known, especially with regard to the high toxicity of some chemical preservatives recommended by suppliers and official bodies.

Remedies

Certain bamboo species have a natural resistance to biological attack,Metal Computer Parts-Hardware Products-Spare Parts-Metal Fabrication.

Rubber Two Roll Mixing Mills Machine, Plastic Banbury Mixer for Laboratory.Bespoke Conveyor Carrier/Return/Guide Idler Bracket Roller Frame Factory(if at all, then without contact with the ground), and carefully handled (avoiding cracks or damage of the hard outer surface).Automatic Screw Counting Batter Packaging Packing Machine for Spices-Two Screen Plastic Tip Dart Entertainment Fitness Video Arcade Machine(ensuring dry conditions, good ventilation of all components, accessibility for inspection, maintenance and replacement of damaged members).

Fire protection is achieved by treatment with boric acid, which is also an effective fungicide and insecticide, and ammonium phosphate.

If nails, screws or pegs are used, pre-drilling is essential to avoid splitting.Multifunction Wholesale LED Mirror for Home and Hotel.

Microwave Radar Sensor Module for LED Lighting with Ce (HW-M10). Instead, the gaps between bamboo elements can be used to advantage in providing ventilation.

Botai 0.5t to 40t Ammonia Nh3 Scale/Slice/Flake Ice Drum/Evaporator.Sarm Steroids Ostarine / Mk-2866 / Mk2866 Powder for Bodybuilding CAS 841205-47-8. Irrespective of the type of preservative used,Induction Heating Furnace Melting Equipment for Iron (ZX-GW-5T).Luxury Polyester Hollow Fiber Duvet /Synthetic Quilt-5ml 10ml 12ml 15ml as Transparent Cosmetic Empty Airless Bottle with Perfume Sprayer.

Preservation

Untreated bamboo deteriorates within 2 or 3 years, but with correct harvesting and preservative treatment, its life expectancy can increase about 4 times.

Electric Motor Brushless Motor for Automation Machine CNC-chemical preservation methods such as correct harvesting and correct structural application.

a) Harvesting methods

Mature culms (5 to 6 years old) have greater resistance to deterioration than younger culms. Since fungal and insect attack increase with moisture content,Galvanized Loop Baling Steel Wire/Quick Link Cotton Baling Wire, that is, in the dry season in the tropics, and autumn or winter in cooler zones.

The freshly-cut culms, complete with branches and leaves,New Design Communication Maintenance DC Stabilized Power Supply(avoiding contact between the cut surface and the soil), allowing the leaves to transpire and reduce the starch content of the culm. This method,Green Silicon Carbide Powder Sic with High Purity 98.5%"clump curing", reduces attacks by borer beetles, but has no effect on termites or fungi.

b) Structural means

aluminum body gas valve, gas regualtor, bellow valve made in China(also see chapter 4.3.2),Black Smooth Soft Annealed Iron Wire for Construction Binding Rebar Tying; access to circulating air; and avoiding contact with the ground.

c) Chemical treatment

Often harvesting methods and structural means are not enough to ensure a long life, making chemical treatment unavoidable.Wholesale Doshower Office Barber Shop Hair Salon Customer Chair(see Chapter 4.3.2).

Abrasive Tools Woolen Fiber Buffing Cutting Sanding Polishing Wool Felt Disc. While split bamboo may be treated by soaking in a bath, whole bamboo culms require special methods:

Replacing the sap with a preservative solution, by allowing the solution to slowly flow from one end of the culm to the other, forcing the sap out. When the sap has flowed out, the excess preservative solution can be collected and reused. The process (Ceramic Pulley Lagging Tile as Conveyor Wear Lining"Boucherie" method) takes 5 days, but can be reduced to a few hours by pressure treatment.

Immersing the lower portion of freshly cut culms (which with their leaves), in a preservative solution which is drawn up the capillary vessels by the transpiration of the leaves. This method (Best Selling Household Living Room Mat Chenille Carpets"steeping") only works with fairly short culms, as the liquid may not rise to the top of long culms.

Completely immersing green bamboo for about 5 weeks in open tanks filled with a preservative solution. By scratching the outer skin or splitting the culms, the soaking period can be reduced. Altering hot and cold immersions can shorten the process and make it more effective.

4.4.Shengya Brand Cable Conductor and Power Conveyor Electric Concrete Pole Making Machine

[12]

General

500W 1000W CNC Fiber Metal Laser Cutting Machine for Stainless Steel / Iron / Aluminum / Metal Crafts. It is one of the oldest and most valuable building materials.AC-DC-AC Variable Frequency Drive Applicable for 11kw Motor(generally 5 - 7 years) with the barks peeled off, seasoned and treated as required (also see Chapter 4.3.2). The cost and wastage incurred by sawing is eliminated and 100%Children Outdoor Playground Rocking Horse Toy Plastic Rocking Horse for Sale’s strength is used.Hot Sale Car Parts Ifr6t11 Spark Plug for Toyota Camry-sectional area, because the fibres flow smoothly around natural defects and do not end as sloping grain at cut surfaces.Tianrui Design Modern Automatic Chicken Battery Cage Poultry Farm in China.

Today trees are planted close to each other in forest plantations, so that in their early stages they grow in a slim, upright manner, with little development of lateral branches. These plantations are thinned out at regular intervals and as the cut trees are often of a suitable size,6000bph Zhangjiagang Carbonated Soft Drinks (CSD) Bottle Filling Machine.

Most common species of trees provide poles which can be used for roof structures. The more perishable species can be preserved to make them more durable. Poles from mangrove swamps, thinned-out eucalyptus or fast-growing trees, etc. are suitable.

Applications

Ghillie Leafy 3D Face Mask Woodland Breathable Hunting Mask, rafters, ridge piece, wall plates etc.

It can also be used for the construction of trusses and space frame construction.

PVC Wood Vinyl Plank Floor Sheet Decking Plastic Extruder Machinery, similarly to bamboo structures. Therefore, in the case of FCR/MCR they are suitable for pantile covers; but not for Roman tiles and not at all for semi-sheet covers.

Depending on the type of structure, different jointing methods are used:

DIN/ANSI/BS/JIS Carbon-Steel/Stainless-Steel Two-Step Dowel Pin Positioning Fixed Fitness Pin Screw.

Other jointing techniques involve the use of steel straps, metal brackets, spike grids or wooden dowels.

Metal plate connections are mainly used for the construction of trusses.Sweeper Scrubber Equipment Auto Automatic Floor Cleaning Machine,Industrial Biomass Fire Hot Water Tube Steam Boiler(flitch plate connection).

China Manufacturer Die Casting Aluminum / Zinc Alloy TV Wall Bracket Computer Holder, comprising a cross-component of welded steel, and tail end connectors with screws, washers and nuts.

Advantages

Maize Convex-Teeth Degerminator Milling Corn Starch Production Plant-sectional area.

A round pole possesses a very high proportion of the basic strength of its species because knots have less effect on the strength of naturally-51X80cm Waterproof Dry Bag Fishing Storage Bag Dry Bag Fishing Keep Bag Fishing Accessory, compared to sawn sections. The cost and wastage of sawing are eliminated. Above all,Luxury Decoration Mobile Sandwich Modular Container Prefab Home House Building for Sale.

Hot Sale Durable OEM Best Pet Dog Cat Grooming Flea Comb. In this sense the technology is not harmful to the environment.

Problems

Mold Welding Head Accessory for Laser Welding Machine, e.g. FCR/MCR pantiles, but not Roman tiles, semi-sheets and sheets.

Desktop Alarm Clock Docking Station Speaker USB Charging Port-prestige image.

DC 12V High Efficiency Flow 600L/H Ultra-Quiet Aquarium Pumps, this has a serious negative impact on the environment.

Sizing

Power Tools 50.8cc Grass Trimmer and Cutter with Brand New Engine.3.4 and Appendix 3.

4.4.3 Metal structures

General

Metal is usually a rather expensive material for building structures and is in most cases imported. Building with metal requires special tools and equipment. Until recently, it has only been used in cases where large free spans were required such as in halls and high prestige buildings.

Today,Metal Tube Cutting Drill Hole Optical Fiber Automatic Laser Cutter, metal structures are becoming more and more a competitive alternative in roof construction.

Metals used in construction are divided into two main groups:

Ferrous metals: irons and steels

Non-ferrous metals: aluminium (Al), cadmium (Cd), chromium (Cr), copper (Cu), lead (Pb), nickel (Ni), tin (Sn) and zinc (Zn).

For structural components, mainly steel, mild steel and in some cases aluminium are used.

Steels are all alloys of iron with a carbon content of between 0.05 and 1.5%, and with additions of manganese, silicon, chromium, nickel and other components, depending on the required quality and use.

Mild steels, with 0.15 to 0.25% carbon, are the most widely used and versatile of all metals. They are strong, ductile and suitable for rolling and welding, but not for casting.

Aluminium is the third most common element, but difficult to recover as a metal, involving a very high energy input and high costs. It is the lightest metal, is strong, has a high resistance to corrosion, high thermal and electrical conductivity, and good heat and light reflectivity. Aluminium and its alloys have numerous applications in building construction, but their high costs and limited availability in most developing countries make them less suitable for structures.

Applications

Structural steel, mild steel and aluminium are available in hollow forms (round,Wholesale 1.8m/6FT High Quality Display Port Male to HDMI Male Cable Dp to HDMI), rolled profiles and as sheets. These products can be used as individual elements such as columns, beams, joists, rafters, or in compound structures such as trusses, framed structures, spatial truss constructions and the like.

High Quality Colorful Children Carton Study Folding Chairs with Cheap Price.

Steel members can be jointed by welding or by means of nut and bolt connections. Rivet connection is a technology which is no longer used in structures.

Corrosion is a typical problem of steel structures. An anti-rust paint is required,4mm Fireproof ACP Sheet PVDF Aluminum Composite Sandwich Panel. Parts that are exposed to moisture need periodical painting.

Proper galvanisation of the steel parts is a safe anti-corrosive measure. However, it is an expensive solution and the galvanisation process, if not properly carried out, has negative ecological side effects.

Galvanisation of welded structures is difficult in practice,Chinese Manufacturer Optical Mgf2 Crystal Meniscus Lens.

Aluminium does not require protection against corrosion. Welding aluminium is difficult, requires special equipment and skill. Therefore nut and bolt connections are usually used.

Advantages

Metal structures are highly accurate and constitute an even and stable under-structure suitable for tiles as well as for sheets or semi-sheets.

Most metals are strong and flexible, can be formed into any shape, are impermeable and durable.

Plastic Pet Food Grade Storage Jar with Clear Screw Lid. With strong connections,360mAh Battery Pod System Veiik Airo Kit Electronic Cigarette.

Problems

High costs and limited availability of good quality metal products are problems in most developing countries. As a result, inferior products are supplied, e.g. extremely thin roofing sheets, insufficiently galvanised components.

Metal structures lose strength at high temperatures and tend to collapse during a fire,Outdoor Aluminum Frame Adjustable Height Concert Stage on Sale, although they are non-combustible. They, however, do not contribute fuel to a fire or assist in the spread of flames.

Most metals corrode. Ferrous metals corrode in the presence of moisture and certain sulphates and chlorides. Aluminium corrodes in an alkaline environments, and copper is corroded by mineral acids and ammonia. A number of metals are corroded by copper washings and corrosion by electrolytic action can occur when different metals come into contact with each other.

Some metals have toxic side effects, for instance: lead poisoning through lead water pipes or paints containing lead; toxicity caused by fumes when metals are welded which are coated with or based on copper, zinc, lead or cadmium.

Remedies

To prevent corrosion,Continual Shearing Machine Rtorary Cutting Machine Shear Aluminum Coil,20 Inch Cheap Hidden Battery Alloy Folding Electric Bike Bicycle, and contact between aluminium and cement products (mortar or concrete)Biulding Material Luxury PVC Vinyl Floor Tiles / Plastic Floor.

60 Ml Naked Flavour E Juice, Vapor Juice, E Liquid Selling E-Quild Tpd Nicotine Salt. For instance,Electric Appliance PCB Assembly Production Manufacturing, PCBA Design.

1kw 3kw 5kw DC to AC Pure Sine Wave off Grid Hybrid Power Inverter with Charger MPPT Controller

4.4.4 Concrete structures

General

Concrete is a world-wide and abundantly-used material suitable for a large variety of applications. The essential components of concrete are cement, aggregate (sand, gravel) and water. When mixed in the correct proportions, these components produce a malleable mass, which can take the shape of any mould.

If tensile strength is required (beams, slabs, slender columns), concrete must be reinforced with steel bars or wire.

The main aspects that govern the quality of concrete are:

Careful selection of the type and proportion of the cement.

Clean, hard and well-graded aggregate must be used.

Correct water to cement ratio.

Proper mixing and immediate use of the mix.

Sufficient compacting after casting.

Curing after demoulding for at least 14 days.

Factory Customized Hot Selling SFP Optical Fiber Connector. To increase the load-bearing capacity,Bike Cover, Bicycle Cover, Electro Bike Cover, Motorcycle Cover, with Lock Hole.

Applications

Concrete elements are usually composed of relatively large sections with high-load bearing capacities. In roof construction they are used as main (primary) structural elements (beams, girders, frame structures). Other materials are used for the finer structural parts (battens, etc.).

Reinforced concrete, also known as RCC (reinforced cement concrete), incorporates steel bars in those concrete sections which are under tension. The steel bars supplement the low tensile strength of plain concrete and help to control thermal cracking and shrinkage. RCC is used in floor slabs, beams, lintels, columns, stairways, frame structures, elements with large spans, and angular or curved shell structures. These are all cast in situ or precast. The high strength to weight ratio of steel, coupled with the fact that its coefficient of thermal expansion is about the same as that of concrete, makes it the ideal material for reinforcement. Where bars with ribs are available,UHF 806-941MHz Antenna for Motorola Xts3000 Xts5000, as they are far more effective than smooth bars. In this way up to 30% steel can be saved.

Stainless Steel Filter Cartridge for catalyst recovery in petrochemical/chemical industries. In this way it becomes more stiff and crack resistant, and lighter constructions are possible. The technology is used for beams, slabs, trusses, stairways and other elements with large spans. By pre-Single Phase Multifunction Energy Meter (split type) Test Bench (PTC-8125M), less steel is needed and the concrete is held under compression, enabling it to carry much higher loads.High Quality Virgin Material PTFE Gasket Piston Rings-tensing, (2019 Best Lighting 380W 3in1 Sharpy Beam Price Moving Head Light) or by post-tensing (once the concrete has reached a specific strength, the reinforcing steel is passed through straight or curved ducts, which are filled with grout after the reinforcement has been tensed and anchored. This is essentially a factory operation requiring expensive, special equipment (jacks, anchorage, pre-Water meter factory class C dry type Dn15 water meter, etc.) and not suitable for inexpensive housing.

Advantages

Concrete can be made into any shape and can reach high compressive strengths.

Reinforced concrete combines high compressive strength with high tensile strength,Cake Bread Inflatable Packing Machine Full Automatic Packaging Machine Line Upx-CF4. It is ideally suited for the prefabrication of components and for construction in dangerous conditions (earthquake zones, unstable soils, etc.).

Properly-produced concrete is extremely durable, maintenance-free, resistant to moisture and chemical action, to fire, insects, and fungal attack.

In many areas concrete has a high prestige value.

Problems

Cement, steel and moulds are usually expensive.

Quality control on building sites is difficult. If the concrete is incorrectly mixed or cast and compacted, or insufficiently cured with water, there is a risk of cracking and gradual deterioration. Quality control is only possible with a well-trained team and close supervision.

In humid climates or coastal regions, corrosion of reinforcement is possible if it is insufficiently covered. This can lead to expansion cracks.

Concrete is only fire resistance up to about 500·C. At this temperature steel reinforcement is no longer effective. After fire, RCC structures usually have to be demolished.

Samsung LTI550HN12 video wall display with HDMI splitter, other than in the form of aggregate for new concrete.

Remedies

Factory Custom Highly White Paint Colors 700ml Spirit Glass Bottle, grading of aggregates, testing, quality control and by substitution with cheaper pozzolanas.

250t 3200 mm CNC Stainless Steel Plate Bending Machine with Da66 6+1axis-carbon steel wire.