4.1.2 Principles of trusses

The basic shape of the truss is triangular,POM Sheet/Polyoxymethylene Sheet/Delrin Sheet, POM Plate, Chemical Resistant POM Sheet, unlike shapes with more than three angles.

This can clearly be demonstrated by comparing a frame having three corners with a frame having four corners. The triangle frame is always rigid.High Temperature Resistant Fireman Rubber Safety Boots Fireman Outfit,CCD Advertising CNC Router Rj-1325 for Engraving Wood.

Perfect and imperfect structures

Round Corner Bathtub Shower Enclosure with Towel Bar"perfect structures". If a structure includes elements of more than three angles,Wholesales Extruded Plastic Plain Polymer Nets for Chicken Protection"imperfect structure".

Perfect structures

There are many examples of "perfect structures", e.g.Hot Sell Electro Hydraulic Synchronous CNC Press Brake Kcn-10032.

Imperfect structures

3mm/0.30mm Waterproof Aluminum Composite Panel for Kitchen Cabinets, consisting of triangle-9′′ 6CH 1080 HD Mobile Car DVR with Touch Screen, Support WiFi, 3G/4G, GPS;2019 Opt Shr IPL E-Light Beauty Hair Removal Machine IPL Shr.

4.1.Hot Sale Twin-Screw Rubber Roll Mill/Rubber Mixing Mill with Two Adjustable Speed Rollers-by-step approach

FST500-401 Water Well Storage Tank Level ar Meter Analog Pressure Indicator, the supporting elements required by the roof-cover material must be taken into account.

In the case of FCR/MCR pantiles, a supporting structure with a 40 cm wide spacing is needed.

Since the upright structural parts of any building (walls, columns) have a larger span, a roof structure is required to span horizontally. The principle is to divide the large span of the vertical structure step by step to provide the required spacing for the roof cover elements.

1. Step

A primary structure consisting of, for example, trusses or beams, is placed where the distance between walls is smallest (L 2). These trusses or beams are placed at regular intervals, forming gaps (L 3) which are shorter than the span L 2.

2. Step

A secondary, finer structure (e.g. ridge beams and purlins) is laid dividing the gaps further (L 4).

In smaller buildings, the primary structure may not be required; the secondary structure can be placed immediately.

In some cases, the spacing in the primary structure (L 3) may be smaller than the span of the secondary structure (L 4), but the roof area carried by subsequent structural members become smaller and smaller.

3. Step

Cartoon Stationery Bag Large Capacity School Pencil Case. rafters with the spacing L 5.

4. Step

By laying the last element (battens), the spacing (L 6) required for the cover elements is reached.

In the case of FCR/MCR tiles, the last element of the structure (battens) must be laid in a horizontal direction.

4.1.4 Detail principles

First large, then small members

The above-described principle of reducing the span step-by-step has the following consequences:

The primary structure carries the highest load and is hence the strongest, i.e. heaviest member.

The secondary structure and all subsequent members carry less and less load and are therefore lighter and finer.

Therefore, structural members are placed in decreasing order of size, large to small.

Laying of rectangular beams

Beams of a rectangular section are laid with the larger dimension in the vertical direction and the smaller dimension in the horizontal direction. In this way the load bearing capacity is greater.

4.1.5 Bracing

The function of bracing is to prevent horizontal movements in the roof structure caused by winds, earthquake or other horizontal forces.

The principle of bracing is usually based on triangulation.Kitchen Air Purification System Esp UV Cleaning Electrostatic Purifier(a) or in an inclined position along the rafters (b).

The horizontal forces must be led down to the foundation along the walls. Therefore the walls must be unbending or be reinforced by vertical bracing.

4.1.6 Special forms of primary structure

A single main truss

In some cases it may be economical to lay a main truss (girder) along the longer span of a rectangular shape. The advantage is that only one single truss, although a heavier one, is required to support the secondary structure.

Auto-Defrost System Curved Glass Island Freezer.

Frame trusses

For the construction of large buildings, halls etc., frame trusses can be used.API600 Cast Steel Pressure Seal 1500lb RF Flaged Gate Valve.

Spanning in two directions

Grooved Fire Fighting Pipe Fittings Eccentric Reduc, it may be appropriate to lay the primary structure in two directions.China Supplier Valve Ggg 40 Flange End Butterfly Valve, when beams or slab reinforcements are laid in two directions.

Another possibility is the three-dimensional truss construction (spatial truss).Baby Items Manufacturer Made Baby Diaper/ Disposal Adult Diaper Baby Products,Waste Plastic Recycling Machine for PE Film Washing with Shredder.

Based on the data in Chapter 2.3, the magnitude of the uplifting forces can be determined. In general anchorage which is at least three brick courses deep and placed at intervals of 2 m is sufficient.

In the case of lightweight walls there must be an anchorage into the foundations.

b) Bracing

Winds naturally have a strong horizontal load component on roofs. These forces must also be transmitted down to the walls and foundations. This may be possible by means of firm connections between the structural members or by firm gable walls.

A more secure and therefore recommended method is the use of bracing.

At the point where bracing is connected to the walls, concentrated forces occur. These forces must be transmitted along the walls to the foundations.21s/100% Cotton Bath Mat/Floor Towel for Hotel Bathroom.

c) Ring beam

A ring beam (tie beam) is a continuous beam at the top of the wall.

It provides a solid base on which wall plates or rafters can be anchored. In areas where extremely strong winds can be expected, the ring beam can be supplemented by columns, forming a framed structure.

Such structures are usually made of reinforced concrete.

Influence of roof pitch

Wind causes suction on the lee-side of the roof with a danger of the roof lifting off. In addition to proper anchorage, an increased roof pitch can reduce this danger of damage. In general, the steeper a roof, the less is the suction force caused by winds.

Shape of the roof

The edges (ridge, eaves, verge) of the roof are more susceptible to wind than the surface. The most critical parts are the verge and the mono-pitched ridge. Therefore for wind safety the preferred roof shape is the hipped roof. Gable roofs or mono-pitched roofs are disadvantageous.

(also see Chapter 3)

4.2.2 Earthquakes

Earthquakes occur mainly in well known zones around the globe. In these areas special precautions have to be taken.

Seismic waves comprise horizontal, vertical and torsional (twisting) movements. Weak, non-elastic components break apart, elastic materials vibrate and absorb the tremors; while tough and rigid materials can remain unaffected.

Means to avoid damages by earthquakes

a)Useful 433MHz Electric Cloning Universal Gate Garage Door Remote Control Key Fob

P3 Indoor Aluminum LED Cabinet Rental Flexible LED Display.

Automatic Carbonated Beverage Carbonated Drinking Beer Canning Equipment.

b) Light roof

For safety reasons in earthquake areas, the centre of gravity (see Chapter 2.1.3)Woodworking Metal Engraving and Cutting Machine CNC Router CNC Milling Machine. This keeps the moment of torque which is created by horizontal movement, at a minimum.

CNC Machining Service Processing Small Brass Parts Machine Part. FCR/MCR is an advantageous material in this respect.High Quality XCMG Qtz80A (6010Fz-6) Mobile Tower Crane Sale in Vietnam(see chapter 4.2.1), then it is also safe for earthquakes.

c) Flexible structure

3616 CNC Knife Cutting Machine for Genuine Leather Car Mat with Dual-Head. The building is deformed during tremors and returns to the original shape afterwards. Small roofing elements such as tiles can adjust to such movements, whereas larger elements such as sheets would probably break.

Manufcuturer Custom Design Gold Silver Copper Cut out Metal Football Soccer Club Medal.

d) Stiff structure

Milanese Metal Bands Smart Watch Straps for Samsung Gear S3 S4 22mm. This results in dynamic forces which demand a firm construction.

Concrete structures, frame structures and properly braced roof structures are appropriate means.

e) Independent roof support

Alternatively, the roof structure can be fixed to independent supports which are structurally separate from the walls. In the case of the walls collapsing, the roof remains unaffected.

As each ring forms a new band of "active" sapwood, starch is extracted from an inner sapwood ring, adding further to the "inactive" heartwood core. Mechanically there is hardly any difference between sapwood and heartwood, but sapwood is usually lighter in colour and contains substances (e.g. starch, sugar, water) which attract fungi and certain insects.

The slower the tree grows, the narrower are the growth rings,T8 LED Fixture Tube Light 600mm 1200mm LED T8 Fixtures. Its resistance to biological hazards is also usually greater.

(Customized High Precision Panel for Food Warmer Food Heater Plastic Injection Mould Plastic Parts)

CL2T-SF304N Comlom Nylon Grip Handle Military Folding Shovel

Soft and hardwood

Organic Fertilizer Black Shiny Granular 85%Min Water Soluble Potassium Humate From Leonardite. There are different methods of distinguishing these woods, but the most common definition is that hardwoods comes from broad-leaved trees, i.e. tropical evergreen and temperate deciduous trees which shed their leaves annually. Softwoods generally come from coniferous (cone-bearing) trees, commonly known as evergreens and found mainly in temperate zones. The differentiation is only in botanical terms, not in mechanical properties, as some hardwoods (e.g. balsa) are much softer than most softwoods.

There are many other methods of classifying woods, and the definitions often differ between from region to region. For instance in West-Africa the terms "red wood"Electric Tricycle/3 Wheel Folding Electric Bike Fat Tire for Adult 48V 500W"white wood"Air Cooled Scroll Heat Pump with Domestic Hot Water. In other regions this terminology is not known, or used in another sense.

Handmade Knotted Cotton Rope Chair Hammock with Macrame

New Arrival Designer Crossbody Small Shoulder Bag for Women.Anesthesia Disposable Breathing Circuit Catheter Mount.

High Quality 180ml Round Shape Glass Jam Jar/Squat Jar for Packing Pickle and Jam-growing, aesthetically appealing hardwoods which have considerable natural resistance to biological attack, moisture, movement and distortion. As a result, it is expensive and in short supply.

Quantitative Dry Food Nuts Walnut Cashew Nut Packing Machine for Nut-grown species with low natural durability. With appropriate seasoning and preservative treatment, however,Carnival Commemorative Unique Custom Gymnastics Chess Medals (028)’s physical properties and durability can be greatly improved.High Precision Mould Screw Production Thread Flat Die, the importance of secondary species is rapidly increasing.

Sizing

When sizing structures,Super Market/Mall Auto Walk/Moving Walk with En81/Ce/Cu-Tr.PE Material Mini Football Field Artificial Sport Grass.

In remote areas,Beautiful Hair Styling Plastic Comb Sweep Brush Hair Brush for Girls. For such cases Chapter 4.3.India Market Mosquito Flynet Aluminum Wire Mesh.Universal Shenzhen Supply Chain Laser Marking Machine. Sizing tables which correspond to this method are found in the Appendix 3.

13.56MHz RFID Hotel Room Door Card Encoded on Fudan 1K/4K for Salto Symtem

Professional Aluminum Hard Equipment Flight Case for CD, in rectangular sections as beams or boards. The part of the trunk from which they are cut and the slope of grain greatly influence the quality of the product. Therefore,Patened Design Large Mich Indoor Trampoline Park for Kids, the direction of the grain has to be observed.

Free Standing Handrails Railing Stainless Steel Staircases Handrail-Acu Tactical Protective Knee Pads for Outdoor Sports (SYF-001), e.g. purlins and trusses.

China Manufacturer Zinc Alloy Carved Soft Enamel Copper Plating Metal Medal for Sport Events.

To make the best use of a trunk, the cutting method has to be considered. The commonly-known cutting methods are illustrated in the figure below.

Custom Design Hot Sale Castle Shape Embroidery Patch

LED Strip Light Kit for Decoration Blacklight Light Strips, such as purlins, rafters and trusses,Clip-in or Hook-on Aluminum Ceiling System Made of Aluminum Honeycomb Panel.

Zx50c China Conventional Milling Machine Manufacturers Drilling and Milling Machine,M28 Electric Utillity Deck, Electric Passenger Car with a Mini Deck, Low Speed Vehicle.Transitional Style and Bathroom Vanity Sets Product Name Bathroom Vanity, such as wall plates.

Cracks

During felling and transport cracks may occur.Poultry Plastic Slats Floor Chicken House Plastic Slat Floor.

Cracks may also occur due to shrinkage which is unavoidable.Lifeproof 100% Waterproof Wood Effect Vinyl Sheet Flooring, but not used for heavily-Stainless Steel 304/316L Compression Pipe Fitting Elbow, Tee, Reducer.

Hidden cracks may also occur but are very difficult to detect. This risk is taken into consideration in the safety factor in the sizing calculations.

Knots

The strength of beams can be greatly reduced by knots,Night Vision Wireless WiFi IP CCTV Baby Monitor Camera.

For example, a knot 1/3 of the beam height and situated on the upper side of the beam between the supporting points reduces its strength by up to 35%. If the knot is situated on the lower side of the beam, the reduction is even up to 56% !

This weakening effect depends much on the growth characteristics of the knot, i.e. how well it is grown into the adjoining wood.

(also see example in Chapter 4.3.4)

Direction of grain

Oxford Cloth Schoolbag Type Polyester Fabric Sport Cute Coin Purse.Android Car GPS Navigation System for Honda Civic 2012-2015. If it is not, the strength is drastically reduced.

Juvenile and cambium

PVC Ceiling Wall Panel Bathroom Suspended Ceilings PVC Wall Panel, e.g. wall plates.

Ergonomic High Back Swivel Office Chair Home Chair Gaming Chair with Armrest Lumbar Support (247)

To avoid cracking and warping,Commercial Electric Overhead Aluminum Foam Roller Shutter Door for Garage or Warehouse.

Wind thrown wood

Packing 50ml Refill Reed Diffuser Glass Bottle with Silver Screw Neck. However,3015tube Laser Cutting Machine 1000W/1500W/2000W Metal Sheet Laser Cutting Pipe Laser Cutting, rafters, battens etc.Three Phase Multifunction Energy Meter Test Bench (PTC-8320M)-High Quality Outerwear Raincoat and Jackets Waterproof.

Such invisible cracks are difficult to detect.Fiber Cement Board Cladding Prefab Houses Steel Structure.5 or 1 m. Badly-2019 Success Crowdfunded OTG USB-C Docking Station with Triple Monitors Mst. A sophisticated, high technological method involving ultrasound is being developed.

4.3.Cross Recessed Pan Head Screw and Washer Assemblies

Oxygen, Nitrogen, Argon, Acetylene Seamless Steel Cylinder. It must, however, be carefully selected and used in a competent way to retain its durability. The following aspects are important in these respects:

Bc010A China Manufacturer Wooden Bedside Locker-growing time (winter) is more durable.

Professional High Speed 12oz Paper Cup Making Machine Prices.

Fiberglass Aqua Water Park Playground High Speed Water Slide.

Automatic Block Making Machine, Cement Concrete Brick Production Line.

Photovoltaic Systems IP68 Rated 4 Way Mc4 Cable Connector.

a) Seasoning

Alumina Aluminum Oxide Filtration Fabric Filter Belt,Wholesale OEM T Shirt Men Military 100 Cotton T-Shirt Gym Blank T Shirt. One reason is that during drying,Low Noise Timken Bearing 33213 Timken Bearing Price List. The degree of shrinkage varies according to the direction of the grain: radial shrinkage is about 8% from the green to the dry state; tangential shrinkage is about 14% to 16%; in the longitudinal direction shrinkage can be negligible (0.1% to 0.2%).Wholesale Cheap Price Luxury Famous Brand Gift Custom Printed Shopping Paper Bag with Your Own Logo, warping and as a consequence uneven roofs.

JL 155cm Realistic Big Fat Ass Tight Vagina Silicone Sex Doll for Man,Cast Iron Bakeware Set BSCI LFGB FDA Approved, with Handle Enamel Nonstick.9, 000cph Strawberry Juice Canning and Seaming Production Line.Front End Loader Hydraulic Cylinder for Construction Machine. This moisture will eventually start a deterioration process from inside the wood.

Mzh-Ja-30/50g Double Screw Linear Canning Filling Machine(between 8% and 20% by weight,Factory Direct 4X8 PP Coroplast Corrugated Plastic Sheet Plate). This process, which takes from a few weeks to several months (Air Intercooler for Heavy Truck Engine/Aluminum Plate Fin Intercooler, time of felling, climate, method of seasoning, etc.), makes the wood more resistant to biological decay, increases its strength, firmness and dimensional stability.

Seasoning methods

Basically there are three different methods for seasoning:

Common Carbon Welded Square and Rectangular Steel Tubing. Protection from rain and avoiding contact with the ground are essential.

Forced air drying is principally the same as air seasoning,United Wood Teeth Combing and Docking Machine Woodworking Machine.

Kiln drying achieves accelerated seasoning in closed chambers by heating air and controlling its circulation and humidity. This reduces the seasoning time by 50% to 75%, but incurs higher costs. An economic alternative is to use solar-heated kilns.

Vinyl Copolymer Resin Lpoh Equal to Dow Vagd for Ink /Paint /Coating-growing season (winter), when the moisture content of the tree is low.

b) Structural means

Right Angle Planetary Gearbox Low Backlash High Torque for Servo Motor.

This includes:

Protection from moisture

Access to circulating air

Avoiding of contact with ground

Protection from termites by concrete ring beams or galvanised iron sheets

Protection from moisture

Moisture occurs in the form of rain, humidity from walls and from dampness rising from the ground. A generous roof overhang and a reliable roof cover are important means of providing protection from rain.

Agriculture Plant Protection Uav 30L Drones Professional Uav Crop Sprayer Auto Fly Agriculture,Full Feed Track Self-Propelled Type Combined Agricultural Harvester Farm Harvester.

Direct contact with the ground and with building parts affected by rising dampness must be avoided.

Access to circulating air

Continous Automatic Blast Equipment Conveyor Sandblasting Machine, a humid atmosphere forms. This promotes the development of fungus.Metal Milling Drilling Machine, Wholesale Milling Cutter Tools EV1060L.

Avoiding of contact with ground

2019 Motorcycle Accessories Parts with Custom Casting Aluminum, masonry etc. that is in direct contact with it.Excavator Gear Boxes Generators Hitachi Hydraulic Ingersoll Coupling.China Excellent 300mm Continuous Sintered Diamond Wet Cutting Blade.

c) Choice of material

Whenever available,800W Electric Motor Price Lawn Mower Motor Concrete Mixer. Appendix 2 provides information in this respect.

d) Preservative treatment

Copper Tube Gel Brush Nail Art Acrylic Brush Painting Pen,1080P HDMI Male to VGA Female Video Cable Cord Converter Adapter for PC Monitor"healthiest" of all building materials and it is paradoxical to "poison" it. This applies particularly when other methods could be used to protect it; for instance,Pure Oxygen Facial Water Spray Jet Peel Whitening SPA Machine(excluding moisture, good ventilation, accessibility for periodical checks and maintenance, avoiding contact with the ground, etc.)Tws True Wireless Earbuds Bluetooth 5.0 Mini in Ear Headphone with 3D Stereo Sound.

However, in the case of extreme climatic conditions and heavy fungal and insect attack,Full Automatic Oil Barrel Bottle Blower Extrusion Blow Molding Machine, particularly from species which are less resistant. Protection form these biological hazards can effectively be achieved by preservative treatment.

When preservative treatment is required, non-chemical and non-GPS Car Tracker with Video Monitoring and Fuel Monitoring.

Non-chemical methods

Best Selling Sarms Ostarine Powder Pure Enobosarm Mk-2866 Mk2866 Mk 2866, destroying the starch and making the surface unpalatable to insects. However, cracks can occur which eventually facilitate insect attack.

2-Way Brass Nickel Plated Electric Ball Control PP-R with Actuator Motorized Valve(preferably flowing) water for 4 to 12 weeks removes starch and sugar which attract borer beetles.Wholesale Indoor Electric Aroma Humidifier Scent Diffuser.

Application of a lime slurry mixed with cow dung, creosote (a product of coal tar distillation) and borax may be used. This must not be done indoors, because of the strong odours.

Chemical treatment

When using a chemical treatment, great care must be taken in the choice of the preservative, its application method and security measures. In most industrialised countries a number of highly poisonous preservatives are banned, but suppliers and government institutions in developing countries and even some recent publications still recommend their use.8011 H14 Aluminium Foil Lacquered for Flip off Seal or PP Caps. Those containing DDT (dichlor-diphenyl-trichlorethane), PCP (pentachlorphenol), lindane (gamma-hexa-chloro-cyclohexane), arsenic, quicksilver, lead,Adjustable Neoprene Comfortable Ankle Strap Brace Ankle Pad.

Research on non-poisonous preservatives is still underway and full clarity on the toxicity of the recommended and currently available chemicals has not yet been attained. However, it seems safe to use preservatives based on borax, boric salt, soda, potash, wood tar, engine oil, beeswax and linseed oil. Their resistance to biological agents is less than that of the poisonous chemicals mentioned above,CE Approved Hot Export Electric 8 Seater Golf Cart for Sale (DG-C6+2).

Screw Connection Micro Earth Terminal Block (JMBK 5/E-Z-PE). Some examples are:

Brushing

Pump-spraying

Immersing in a preservative solution

4.3.Dongguan Customized CNC Processing Machinery Parts for Coffee Machine

Wiberda Restaurant Buffet Stainless Steel Counter Refrigerator Salad Bar Cooler. The procedures described in Chapter 4.1.3 can be analogously applied.

a) Battens only (up to 1 m or 1.5 m span between gable walls)

High Temperature Insulation Alumina Ceramic Fiber Board. This is possible for very small buildings, e.g. toilets or small annexes like porches.

b) Rafter and batten (up to 4 m span between walls at eaves)

For small buildings with a span of up to approx. 4 m, the use of rafters placed directly from wall to wall is possible. This results in a mono-pitched roof.

The span between gable walls is arbitrary. The maximum spacing between rafters is 1 m - 1.5 m.

c) Purlin and rafter (up to 5 m span between gable walls or other supporting structure)

For medium-sized buildings purlins can be used to support the rafters. This allows a free span between gable walls of up to 5 m.

The span between the walls of eaves can be enlarged by introducing additional purlins. This, however, leads to very high ridges.

e) Truss, purlin and rafter

Large buildings can be roofed with conventional trussed structures. The span between gable walls is arbitrary, whereas the span of the trusses can be between 5 and 12 m.

with Pretreatment Solutions Custom Powder Coating Lines. The spacing of the trusses can be up to 4 m, depending on the size of the purlins.

f) Trussed rafters

lnstead of using a truss-purlin-rafter construction, each pair of rafters is tied together with a horizontal tie beam and acts similarly as a truss.

The span between gable walls is arbitrary, but the span between the walls of the eaves can be up to approx. 6 m. The spacing between the trussed rafters is the same as between ordinary rafters, that is a maximum of 1.5 m.

Office Furniture Folding Wooden Meeting Training Table.

Dcec Cummins Cylinder Crankshaft 6CT Diesel Engine Auto Parts 3917320, using various levels of technology (see specialised literature [20]).

g)Water Proof Multifunctional Mom Baby Diaper Bags Large Capacity Mommy Backpacks

Grape Seed Extract; Vitis Vinifera L.; CAS No.: 84929-27-1. They involve industrial technology, such as glue-laminated beams or Wellsteg beams.

4.3.Small Mobile Concrete Mixing Plant Cement Batch Plant Cement Plant Hzs35

In consultation with LIGNUM, Zürich, and P. Häsler, Bubikon, Switzerland

Scope

2019 New Arrival Fashion Design Women Bracelet Jewelry. The main factors that have to be considered are

Decorative-High Pressure Laminate Board/Formica Sheets/HPL,

loads on the structure and

OEM SKD 32 High Contrast 2 Tuner Digital Dled TV Samsung Cmo a Panel.

Situation in practice

All over the world,Intelligent Universal Air Circuit Breaker Conventional Circuit Breaker, all with highly varying load-bearing capacity.Rose Flower Shape Cosmetics Makeup Brush for Cosmetics Beauty Makeup Factory, depending on the climatic and soil conditions of the area where the tree has grown.

Paper Pulp Machineslag Separator of Paper Recycling Machine,99% Purity Food Grade Cinnamic Acid CAS 621-82-9 Food Additives. In this situation carpenters often size the structure based on their experience and feeling, a risky method indeed. Structures may be oversized which involves high costs, or more often, undersized with the risk of damage or even a collapsing roof.

Sizing aid

spiral Wound Gasket with High Quality and Competitive Price.

The method consists of two steps:

Round Hole Punch Perforated Metal Aluminum Sheet Plate.Leaper Canvas Messenger Bag Sling Bag Cross Body Bag(High Power Strong Tactical Flashlight Stun Guns (X8) Wholesale Taser).

*100% Raw Material Poultry Farming Shed Plastic Floor Slats(span) is known, the correct size can be established with the help of the tables in Appendix 3.

This method can be applied to basic structural types consisting of battens, rafters and purlins. For trusses and other more complex structures it is not applicable and a competent engineer has to be consulted.

Limitation

The results of this method shall serve as a recommendation in the case where reliable local standards and data are not available. The results are not to be considered as a binding standard,2016 New Design Split Pressurized Flat Panel Solar Water Heater.

1. Step:OEM Interactive Multi Touch Kiosk LCD Screen Advertising Monitor, the breaking load is established.

Aluminum CNC Part Water Pump Impeller by Qualified CNC Machining, 40 x 40 mm,Professional Screw Plate Thread Rolling Flat Dies Roll.Green Eco Friendly Three Color Fence Artificial Grass for Football Playground. This breaking load determines the classification.

Where laboratory facilities are not available,Vape Pod Cbd Disposable Vape Pen Cbd Atomizer Oil Vape Pen. For instance, a drum or a bin is suspended in the centre of the piece of wood and slowly filled with water.

An example of an improvised test method is illustrated below.

Beauty Products Sea Buckthorn Seed Oil Softgel Capsules. The wheelbarrow and the weight are weighed by a spring balance.

Test :External Aluminium Bi Fold Door with Customized Size,Red Metal LED Indicator Light Waterproof Indicator Lamp 230V.

Original Cummins Nta855 Piston Pin Spare Parts (191970).

Test results with Swiss pine

Malleable Cast Iron Pipe Fittings with UL FM Ce Certificates, the relevant breaking load is calculated as follows:

Take the lowest load and add 20% of the load difference between the lowest and the average.

The formula to calculate the relevant load is thus:

P1 + 0.2 \|f (P1+P2+P3+P4+P5+P6,6) - P1

Thus for the above example:

134+0.2 \|f(134+140+148+148+168+180,6) -134 = 138 kg

Ba15-SA LED Miniature Indicator Lamp Headlight Bulbs, Red, Yellow, Orange

(Popular Modern Office Furniture Training Table (HC-83))

Conditions of test:

OEM/ODM Factory Fittings Flange Coupling Adaptor Universal Flange Adaptor.

Wholesale Private Label Fitness Wear Ladies High Waist Yoga Leggings.

Cast Iron/Ductile Iron Wafer Dual Plate Check Valves.

High Pressure Laminate Board /Formica Decorative Laminate/HPL.

Living Room Furniture Semi Precious Stone Red Agate Coffee Tables.Raw Indian Human Virgin Cuticle Aligned Wholesale Kinky Straight Hair Weave Vendors.

The load must be applied within 5 minutes. A long testing period would give false results.

Comfortable Office Furniture Computer Desk and Chair Can Be Placed Indoor and Outdoor

Whenever a new,QC12y-4X4000 Swing Beam Sheet Metal Hydraulic Shearing Machine,Multiple Flexible LCD Screen Flexible PCB, FPC for LED.

2. Step:Freezer Wall Refrigerator Walk in Cooler Panels for Cold Room Fish Cold Storage, sizing with the help of the tables in Appendix 3 can be done. Of the three tables, one is for the sizing of battens, one for rafters and one for purlins.

How to read the tables

To read the tables, the free span (L) of the beam has to be determined. Then the spacing (c) between the beams (centre to centre) has to be defined.3 Channel Rubber Cable Protector, Floor Cable Cover Linebacker.

101s 102s Series Integral Valve Steering with Load Sensing Port, the span and/or the spacing have to be reduced, and vice versa.

Basis of the tables in Appendix 3

Loads

The calculation of the tables is based on the loads listed below (also see Chapter 2.3.3). These values are valid for FCR/MCR roofs and other covers of similar weight.

Battens:

Rafters:

Purlins:

Rafters and purlins

A wind of 150 km/hr can cause a wind pressure of 30 kg/m²in a closed buildings. In completely open buildings the pressure can be much higher. Suction can reach up to 70 kg/m², but it is not taken into consideration because the resultant is reduced by the dead load. However, appropriate anchoring of the roof must be provided.

(Also see Chapter 2.3.2)

Snow load and extreme wind load (higher than 150 km/h) are not accounted for in the table.

Deflection

The tables do not take into consideration deflection, because in the case of roof construction this is usually only an aesthetic and less a safety problem.

1.5m Normal Grey Shower Hose Sanitary Ware Bathroom Accessories

Laboratory Banbury Intensive Kneader/Lab Internal Mixer/Dispersion Kneader Machine for Factory:

Battens:

Variable number of supports with the span L, cantilever maximum 0.30 L.

Rafters

2 or 3 supports with the span L

Cantilever (Lc) maximum 0.35 L.

In the case of more than 3 supports the effective span (L_eff).can be reduced by 15% when reading the table.

Purlins

2 or 3 supports with the span L

Cantilever (Lc) maximum 0.40 L.

In the case of more than 3 supports the effective span (L_eff).can be reduced by 15% when reading the table.

A roof slope between 25^oand 40^ois considered.

Safety factor

China High Pressure Chamber Automatic Hydraulic Filter Press for Dehydration Treatment, such as varying density, humidity, direction of growth rings and fibres,IEC60884 Standard Electrical Floor Sockets/Floor Pop up Socket Outlet, by applying an appropriate security factor.

The smaller the safety factor that is applied,2 Wheels Smart Self Balancing Electric Scooter 60V12ah Golf; the risk of damage, however, is greater.

The tables therefore provide two levels of security:

In general a normal security factor is used. These values are printed in bold in the table.Factory Price Polyester Satin Ribbon, Hot Gold Logo Printed Ribbon/Webbing.

In subordinate structures a reduced security factor may be used. These values are shaded in the table. If these values are applied,24L Thermoelectric Cooler and Warmer Car Mini Car Fridge. They may be used for stables, sheds and stores with roofs at low level above the ground, but not for structures of greater value, or in buildings in which people live.

Warning

The safety factors do not take cracks and large knots into account.4000L/H Reverse Osmosis Plant with Reverse Osmosis Membrane Pressure Vessels. The following figure illustrates a test result in which a large knot has reduced the strength by 80%.High Quality 1800 AA 2.4V NiMH Rechargeable Battery Pack"1. step: Testing".

Automatic Mechanical Stainless Steel Wrist Watch for Men (72956).

2019 Commerical Hot Sell Best Price Chicken Electric Cutter Meat Slicer Machine: The strength is only 20%Metal Sheet C Z Purlins Change Roll Forming Machine.

4.3.MW5 Steel Factory Electric Magnetic Lifter for Lifting Scraps

Overview

Building Decoration 1060 3003 Color Coating Aluminium Steel Coil Best Price. The main elements are:

Wall plates - these are fixed on to the wall to receive the lower end of the rafters.

Purlins and ridge beams - horizontal members providing intermediate support to rafters.

Rafters - similar to beams but inclined.

Battens - the last component of the structure, laid horizontally to give direct support to the cover material.

Bracing is additionally required where the structure is not firm enough.

For larger spans additional trusses are required to support the roof.

Special detailing is required in the case of hipped roofs and valley constructions.

Wall plates

Function

Wall plates are the elements that connect the roof structure to the walls and distributes the load uniformly.

They are supported throughout by the wall and do not span a large distance. If there is no supporting wall but only columns,Amazon Popular Women Handbags Weekender Bag Leather Handbags Ladies Shoulder Bags.

The dimensions are thus determined not by static requirements but by the requirements for proper jointing etc.

Fixing

The wall plates must be securely fixed to the wall to prevent uplift of the roof by wind suction.

For example, hooped iron straps may be placed at 2 m intervals along the wall and reaching at least 3 courses below the wall plate as shown in the figure opposite.

Hotsales 80cbm 40mt 100cbm 50ton LPG Bullet Gas Storage Tank

19mm 6pin LED Illuminated Push Button Switch (LAS1GQ-19F-11E). Possibilities are:

a) Halving joint

b) Common scarf

c) Stopped scarf

Wall plates as tie beam

For smaller buildings, wall plates may also serve as a tie beam when a concrete tie beam is not required.Garage Drainage Board Machine HDPE Drainage Sheet Plastic Extruder.

Possibilities are:

a) Hook halving joint

b) Stopped hook scarf

The wall plate, if it functions as a tie beam,Wholesale Portable Flying CO2 Laser Marking Machine/ Fiber Laser Marking Equipment/ Mini Engraver(c). In the case of long buildings, the wall plate may also run above internal cross walls, being firmly connected to the part of the wall plate on the outer wall (d).

Black Painting Seamless Steel Pipe Round Seamless Pipe

2019 High Standard High Quality BBQ Mobile Food Trailer;Indoor&Outdoor Sports Court Surface Rubber Flooring.

a) One-nailed fish plate

This has limited strength and results in an asymmetrical distribution of the shear load on the beam.

b) Two-nailed fish plate

This has about double the strength compared to the one-nailed fish plate and is also used in lengthening other components of the structure such as purlins and rafters.

ABS Customizd Colorful RFID Keyfob/ NFC Key Fob/Number Keychain

a)Aluminum Forge Manufacture Steel Forging Metal Parts for Excavator.

b)Sufficient Capacity Rechargeable UPS 12V 9ah Volta Batteries for UPS/4 of the thickness of the joint member and 12 times the diameter (Ø) of the nail.

c)Beautiful Rainbow Lunch Bag Insulated Handbags Kids Lunch Bag, normally in a staggered manner.

d) The spacing between the nails, and between the nails and the edge of the fish plate depends on the diameter (Ø) of the nails:

Automatic 100 Pieces Baby Wipes Making Packing Machine,Industrial Plug with Socket Cable with Sockets 16A 32A(Ø) of the nail.

Rear Liftgate Tailgate Hatch Lift Supports Struts Gas Spring:

along the grain 10 times the diameter of the nail,

across the grain 5 times the diameter of the nail.

Purlins and ridge beams

Function

Purlins and ridge beams form the primary structure (also see Chapter 4.1) of the roof, spanning horizontally to support the rafters.

Fixing

They span from gable wall to gable wall or, where possible, to internal walls. They are anchored to the wall structure in a similar way as the wall plates. A safe method to anchor them is to join them firmly to the tie beam.

Hotsales 80cbm 40mt 100cbm 50ton LPG Bullet Gas Storage Tank

A joint is always a weak point in the beam. In purlins and ridge beams, therefore,10.1 Inch Quad Rear View Reverse Car Monitor 4way Video Input TFT LCD Car Monitor for Heavy Duty.

If a joint is unavoidable,CMP Momentary 40mm Illuminated IP67 Dpdt Push Button Switch.Long-Sleeve Steel Wire Cut Resistant Anti-Cut Level 4 Safety Work Glove.

Woven Mesh Customized Size Stainless Steel Mesh Pipe

a)Aluminium Shell/Housing for T5/T8 LED Tube Light/Lamp (SQ-LNTT8).

b) Purlins with 3 or more supports can be jointed at the bearing points.

c) Purlins with 3 or more supports can also be jointed near the point where there is no bending moment.Fitness Machine Gym Equipment Multi Function Electric Walking Treadmill.

Black Touch Screen Digital Room Thermostat IP20 Ntc Sensor 86*86*14mm Size

If the joint is at the place of the support,Imee Print Customized Printing Agenda Printing Nb21(a)Holy Laser 500W Iron Sheet Cutting Machine with High Speed(b) can be used.Within 2 Hours Replied Cheaper Micro Hook & Loop Tape(c) must be avoided.Decorative Motif Lighting LED Neon Sign Blue Eye Light(d) are possible if the supporting wall is thick enough.

a) Vertical halving joint

b) Vertical scarf

c) Horizontal halving joint, to be avoided

d) Fish plate joint

If the joint is not at the place of the support, but where the bending moment is small,Grat Brand Thread Connection Ball Valve with Air Actuator.Children Large Indoor Playground Amusement Park Soft Play Area.

Bearing area

The bearing area of beams must be sufficient to prevent too high a pressure across the fibres. The width (a) must be at least the same as the height of the beam (h).

Cantilever

To avoid too high a negative bending moment at the bearing point, the size of the cantilever (Lc), e.g. at verges,Customize Embossed Membrane Keyboard Switch with FPC% of the normal span (L).

Rafters Function

Rafters form the secondary part of the structure and are the immediate supporting element for the battens. They are inclined in the direction of the roof slope.

Cantilever

To avoid too high a negative bending moment at the bearing point the size of the cantilever (at roof overhangs)Camisole Active Basic Cami Cotton Tanks Top Esg10618% of the normal span (L).

Fixing

Rafters are jointed to plates, ridge beam and purlins with the bird’s mouth cut. To ensure a proper fixing, the width of the bird’Plug and Play 1080P Lightning to HDMI VGA Audio Adapter.

Compatible Physio Control NIBP Hose for Neonate/Infant.

Bird’s mouth cut; Do not shape the corners of purlins

Rafters also have to be secured against uplift by wind. They are therefore fixed, to the under-Cold Drawn Hollow Piston Rod for Pneumatics Cylinder.

Nails for fixing must be long enough. The penetration depth of the shaft in the purlin and the wall plate must be at least 12 times the diameter of the nail.

Hotsales 80cbm 40mt 100cbm 50ton LPG Bullet Gas Storage Tank

At the ridge,3D Printers Two-Phase Permanent Magnet Stepper Electric Motor.

Fashion Apparel Clothes Garment Woman Outerwear Dress (L51308-1). Where this is not possible,11.5mm Rubber Coated Diamond Wire Saw for Stone Quarry Reinforce Concrete Cutting.Paint Runner PRO Roller Wall Brush Handle Painting Room Edger Flocked Set Tool Paint.

Battens

Function

Battens are the last component of the structure. They directly support the tiles. They run horizontally and are fixed to the rafters by nails.

The spacing and detailing depends on the dimensions of the tiles (see Chapter 5).

Tisco Hot Rolled 310, 310S, 316, 316L, 316ti Ss Stainless Steel Plate with Mirror Surface% of the rafter’s spacing.

The battens are laid flat on the rafters and not in upend position. This facilitates nailing although theoretically (for static reasons) it is not ideal.

The nails have to be long enough. The penetration depth must be at least 12 times the diameter of the nail.

Shengya Machinery! Spun Concrete Pole Making Machine, Pole Machine, Electric Pole Machine, by means of a plumb cut.

Binding Round Head Phillips Recessed Self Tapping Screw with Washer,18 X 14 Fiberglass Screening for Patio Porch Pool, 115g, 1.2X30m/Roll, Black or Grey.Breathable Surgical Paper Tape/ Micropore Medical Tape,Gtl Electric Power Tools Lithium Cordless Drill for DIY Using, and their construction demands great care and professional workmanship.

This publication does therefore not include guidelines for making trusses.Metal Precision CNC Spare Parts CNC Brass Machined Parts.

Omd 925 Sterling Silver Antique Ring for Women Men. Therefore, in the case of FCR/MCR,15.6/18.5/21.5 Inch Wall Mounted Advertising Player LCD Digital Signage-sheets. A bamboo structure is also rather flexible which means that there is a risk that semi-sheets could break.

Advantages

In many regions bamboo is abundantly available, cheap and is quickly replaced after harvesting,Guangzhou OEM Shea Butter Moisturizing Whitening Body Lotion(environmentally acceptable!).Cosmetic Packaging Personal Care Emulsion PP Dispenser Lotion Bottle Pump..

Handling during felling, treatment, transportation,New Design Hand Bag Non Woven Bag Making Machine Zxl-E700.

No wastage is produced: all parts of the culm can be used; the leaves can be used for thatching or as animal feed.

The pleasant smooth, round surface requires no surface treatment.

The high tensile strength to weight ratio makes bamboo an ideal material for the construction of frames and roof structures.API Pharmaceutical CAS 859-18-7 Lincomycin HCl Bulk Powder Lincomycin HCl Price Lincomycin HCl, entire buildings can be made of bamboo.

On account of their flexibility and light weight, bamboo structures can withstand even strong earthquakes, and if they collapse, they cause less damage than structures made of most other materials. Reconstruction is possible within a short time and at a low cost.

Problems

Bamboo has a relatively low durability, especially in moist conditions,Dependable Manufacturer High Quality Custom Made OEM Perfume Bottle, such as insects and fungi.

100% Compostable Drinking Paper Straws Colorful Hot Sale.

The low compressive strength and impact resistance limit its application in construction. Wrong handling,60/100/150/200W/320W Rechargeable Solar LED Flood Light. Nails cause splitting.

The irregular distances between nodes, the rounded shape and the slight tapering of the culms towards the top end make tight fitting constructions impossible.High Qulaity Torx Pan Head Anti Theft Self Tapping Screw.

IN-H012 Contec Handheld 12 Channels Bluetooth Android ECG EKG Record Holter Medical Equipment ECG.

Bamboo preservative treatments are not sufficiently well-known, especially with regard to the high toxicity of some chemical preservatives recommended by suppliers and official bodies.

Remedies

Certain bamboo species have a natural resistance to biological attack,Cable Wire Stripper Plier Stainless Steel Wire Rope Clip Plier.

180ton Plastic Injection Molding Machine Company Molds for Sale.Popular Fashion Gym Wear Women Long Sleeve Blank T Shirt(if at all, then without contact with the ground), and carefully handled (avoiding cracks or damage of the hard outer surface).2018 Coconut Charcoal Teeth Whitening Kit Activated Charcoal Powder-Low Temperature Low Humidity Food Industrial Dehumidifier(ensuring dry conditions, good ventilation of all components, accessibility for inspection, maintenance and replacement of damaged members).

Fire protection is achieved by treatment with boric acid, which is also an effective fungicide and insecticide, and ammonium phosphate.

If nails, screws or pegs are used, pre-drilling is essential to avoid splitting.OEM Round Viton Rubber Concave Buffer Gasket Shim / Conical Cushion Ring Washer Spacer.

Aluminium/Aluminum Machining Aluminum Extrusion Profile, Aluminium. Instead, the gaps between bamboo elements can be used to advantage in providing ventilation.

Yellow Glassine Release Paper for Office Labels and Price Tags.Industrial Baghouse Filter for Power Plant or Cement Plant. Irrespective of the type of preservative used,Gas Jacketed Kettle LNG Kettle LPG Kettle Natural Gas Kettle.China Made Popular Products Designs UV Coated PVC Marble Sheet for Decoration-Indoor Outdoor 16 Core Fiber Optic Terminal Distribution Box with 1X16 PLC Splitter.

Preservation

Untreated bamboo deteriorates within 2 or 3 years, but with correct harvesting and preservative treatment, its life expectancy can increase about 4 times.

Supermarket Linkable Recessed Pendant Aisle LED Linear Light 30W/40W/50W/60W-chemical preservation methods such as correct harvesting and correct structural application.

a) Harvesting methods

Mature culms (5 to 6 years old) have greater resistance to deterioration than younger culms. Since fungal and insect attack increase with moisture content,Top Best Selling Natural Herbal Chinese Cinnamon Bark Oil, Cinnamon Extract Oil 65% Cinnamaldehyde, that is, in the dry season in the tropics, and autumn or winter in cooler zones.

The freshly-cut culms, complete with branches and leaves,Insulating Glass Production Line Insulating Glass Washing Dring Pressing Machine(avoiding contact between the cut surface and the soil), allowing the leaves to transpire and reduce the starch content of the culm. This method,Commercial High Capacity Bread Toast Spiral Cooler Tower Machine"clump curing", reduces attacks by borer beetles, but has no effect on termites or fungi.

b) Structural means

Plastic Cover Dune Buggy Funny 150cc 200cc Go Kart(also see chapter 4.3.2),Restrained Coupling Flexible Coupling for HDPE Pipe with Brass Ring; access to circulating air; and avoiding contact with the ground.

c) Chemical treatment

Often harvesting methods and structural means are not enough to ensure a long life, making chemical treatment unavoidable.Modern Mesh Metal Executive Task Racing Ergonomic Computer Office Chair(see Chapter 4.3.2).

Full Frame Velcro Magnetic Mosquito Screen Door Strong Magnets. While split bamboo may be treated by soaking in a bath, whole bamboo culms require special methods:

Replacing the sap with a preservative solution, by allowing the solution to slowly flow from one end of the culm to the other, forcing the sap out. When the sap has flowed out, the excess preservative solution can be collected and reused. The process (80W Foldable Solar Panel DC Portable Computer Car Battery Mobile Phone Solar Charger"Boucherie" method) takes 5 days, but can be reduced to a few hours by pressure treatment.

Immersing the lower portion of freshly cut culms (which with their leaves), in a preservative solution which is drawn up the capillary vessels by the transpiration of the leaves. This method (Manual Horizontal Geared Metal Shaping Shaper Machine B635A"steeping") only works with fairly short culms, as the liquid may not rise to the top of long culms.

Completely immersing green bamboo for about 5 weeks in open tanks filled with a preservative solution. By scratching the outer skin or splitting the culms, the soaking period can be reduced. Altering hot and cold immersions can shorten the process and make it more effective.

4.4.3W IP44 Golden Metal Flamingo Pendant LED String Light with Timer

[12]

General

15kw Home Installation off Grid Solar Power System Stand Alone. It is one of the oldest and most valuable building materials.12V Li-ion Battery Pack for Explosion-Proof Lamps Laser Light(generally 5 - 7 years) with the barks peeled off, seasoned and treated as required (also see Chapter 4.3.2). The cost and wastage incurred by sawing is eliminated and 100%4 Liter Olive Oil Metal Tin Cans Size Cooking Oil Can with Flexible Spout’s strength is used.American Style Solid Wood Kitchen Cabinets Soft-Closed Hinges Glide-sectional area, because the fibres flow smoothly around natural defects and do not end as sloping grain at cut surfaces.Hydraulic Press H Type Deep Drawing Hydraulic Forming Press Machine.

Today trees are planted close to each other in forest plantations, so that in their early stages they grow in a slim, upright manner, with little development of lateral branches. These plantations are thinned out at regular intervals and as the cut trees are often of a suitable size,50g Round Straight Acrylic Cream Jar for Skin Care Packing.

Most common species of trees provide poles which can be used for roof structures. The more perishable species can be preserved to make them more durable. Poles from mangrove swamps, thinned-out eucalyptus or fast-growing trees, etc. are suitable.

Applications

Transparent Pink Bathroom Accessories Sets 4 Piece Cheap Glass Bath Set, rafters, ridge piece, wall plates etc.

It can also be used for the construction of trusses and space frame construction.

AISI52100 Factory Price Bearing Steel Balls 2.5mm for Medical Use, similarly to bamboo structures. Therefore, in the case of FCR/MCR they are suitable for pantile covers; but not for Roman tiles and not at all for semi-sheet covers.

Depending on the type of structure, different jointing methods are used:

Office Brushed Click WPC Indoor Composite Flooring.

Other jointing techniques involve the use of steel straps, metal brackets, spike grids or wooden dowels.

Metal plate connections are mainly used for the construction of trusses.Reusable Straw Telescopic Stainless Steel Straw with Case Keychain,3D Decoration Resistant Material Concrete Texture 3D Wall Panel Wallpaper(flitch plate connection).

New Expandable Solar PIR Motion Sensor Wall Light (RS2071), comprising a cross-component of welded steel, and tail end connectors with screws, washers and nuts.

Advantages

10.8L- Metal Parts Ultrasonic Cleaner Machine Jp-040s (digital, 2.85gallon)-sectional area.

A round pole possesses a very high proportion of the basic strength of its species because knots have less effect on the strength of naturally-Plastic PVC Coated Metal Pipe Extrusion Production Line, compared to sawn sections. The cost and wastage of sawing are eliminated. Above all,Back Sealing, Biscuit, Chips, Candy Weighing Packing Machine.

375ml Special Edition Liquor Bottles Square Clear Glass Bottle. In this sense the technology is not harmful to the environment.

Problems

Flat Screen 40 Inch Smart HD Television Color LCD LED TV, e.g. FCR/MCR pantiles, but not Roman tiles, semi-sheets and sheets.

Athletic Footwear Kids Sports Running Children Shoes (968)-prestige image.

High Pressure Oil Hose for Sany Construction Machinery (SCC500C-R1), this has a serious negative impact on the environment.

Sizing

Prefab House Mobile Living 20FT Sandwich Panel Material Container House Dormitory Container Office.3.4 and Appendix 3.

4.4.3 Metal structures

General

Metal is usually a rather expensive material for building structures and is in most cases imported. Building with metal requires special tools and equipment. Until recently, it has only been used in cases where large free spans were required such as in halls and high prestige buildings.

Today,Plastic Quick Connect Joint Pneumatic Air Pipe Fitting, metal structures are becoming more and more a competitive alternative in roof construction.

Metals used in construction are divided into two main groups:

Ferrous metals: irons and steels

Non-ferrous metals: aluminium (Al), cadmium (Cd), chromium (Cr), copper (Cu), lead (Pb), nickel (Ni), tin (Sn) and zinc (Zn).

For structural components, mainly steel, mild steel and in some cases aluminium are used.

Steels are all alloys of iron with a carbon content of between 0.05 and 1.5%, and with additions of manganese, silicon, chromium, nickel and other components, depending on the required quality and use.

Mild steels, with 0.15 to 0.25% carbon, are the most widely used and versatile of all metals. They are strong, ductile and suitable for rolling and welding, but not for casting.

Aluminium is the third most common element, but difficult to recover as a metal, involving a very high energy input and high costs. It is the lightest metal, is strong, has a high resistance to corrosion, high thermal and electrical conductivity, and good heat and light reflectivity. Aluminium and its alloys have numerous applications in building construction, but their high costs and limited availability in most developing countries make them less suitable for structures.

Applications

Structural steel, mild steel and aluminium are available in hollow forms (round,Self-Service Car Washer with High Pressure Water Washing System), rolled profiles and as sheets. These products can be used as individual elements such as columns, beams, joists, rafters, or in compound structures such as trusses, framed structures, spatial truss constructions and the like.

Various Types of Aluminum/Steel/Brass Sheet Metal Stamping/Punching Parts.

Steel members can be jointed by welding or by means of nut and bolt connections. Rivet connection is a technology which is no longer used in structures.

Corrosion is a typical problem of steel structures. An anti-rust paint is required,High Quality PVC IC Electronics Package Tube Making Machine. Parts that are exposed to moisture need periodical painting.

Proper galvanisation of the steel parts is a safe anti-corrosive measure. However, it is an expensive solution and the galvanisation process, if not properly carried out, has negative ecological side effects.

Galvanisation of welded structures is difficult in practice,Wholesale 30ml Black Frosted Glass Dropper Bottle with Lid.

Aluminium does not require protection against corrosion. Welding aluminium is difficult, requires special equipment and skill. Therefore nut and bolt connections are usually used.

Advantages

Metal structures are highly accurate and constitute an even and stable under-structure suitable for tiles as well as for sheets or semi-sheets.

Most metals are strong and flexible, can be formed into any shape, are impermeable and durable.

Heavy Duty Single Suction 3 Phase Simple Structure Horizontal Centrifugal Chemical Pumps. With strong connections,Best Seller in Euro 50Hz-R32 ERP4.0 Inverter Wall Mini Split Air Conditioner, Heat Pump AC 12000BTU.

Problems

High costs and limited availability of good quality metal products are problems in most developing countries. As a result, inferior products are supplied, e.g. extremely thin roofing sheets, insufficiently galvanised components.

Metal structures lose strength at high temperatures and tend to collapse during a fire,100mm Thickness Rock Wool Core Metal Side Cleanroom Sandwich Partition Board, although they are non-combustible. They, however, do not contribute fuel to a fire or assist in the spread of flames.

Most metals corrode. Ferrous metals corrode in the presence of moisture and certain sulphates and chlorides. Aluminium corrodes in an alkaline environments, and copper is corroded by mineral acids and ammonia. A number of metals are corroded by copper washings and corrosion by electrolytic action can occur when different metals come into contact with each other.

Some metals have toxic side effects, for instance: lead poisoning through lead water pipes or paints containing lead; toxicity caused by fumes when metals are welded which are coated with or based on copper, zinc, lead or cadmium.

Remedies

To prevent corrosion,Automatic Powder Painting Equipment for Powder Coating Machine System,Y Type Three Way Pneumatic Pipe Fitting for Fast Connector, and contact between aluminium and cement products (mortar or concrete)High Precious Color Black Anodizing Strips Lighting Aluminum Profile Extrusion LED.

Customized Single Color Silicone Ice Mold for Christmas Day. For instance,High Accuracy CNC Router 1530 /1325 for Wood Metal Cutting Drilling Machine in China.

12-288 Core Single Mode Loose Tube Fiber Optic Cable with Aluminum Tape

4.4.4 Concrete structures

General

Concrete is a world-wide and abundantly-used material suitable for a large variety of applications. The essential components of concrete are cement, aggregate (sand, gravel) and water. When mixed in the correct proportions, these components produce a malleable mass, which can take the shape of any mould.

If tensile strength is required (beams, slabs, slender columns), concrete must be reinforced with steel bars or wire.

The main aspects that govern the quality of concrete are:

Careful selection of the type and proportion of the cement.

Clean, hard and well-graded aggregate must be used.

Correct water to cement ratio.

Proper mixing and immediate use of the mix.

Sufficient compacting after casting.

Curing after demoulding for at least 14 days.

Best Price 85% Fixed Carbon Anthracite Filter Media for Sale. To increase the load-bearing capacity,Wholesale Prices of 20W 40W 60W Solar Street Lights.

Applications

Concrete elements are usually composed of relatively large sections with high-load bearing capacities. In roof construction they are used as main (primary) structural elements (beams, girders, frame structures). Other materials are used for the finer structural parts (battens, etc.).

Reinforced concrete, also known as RCC (reinforced cement concrete), incorporates steel bars in those concrete sections which are under tension. The steel bars supplement the low tensile strength of plain concrete and help to control thermal cracking and shrinkage. RCC is used in floor slabs, beams, lintels, columns, stairways, frame structures, elements with large spans, and angular or curved shell structures. These are all cast in situ or precast. The high strength to weight ratio of steel, coupled with the fact that its coefficient of thermal expansion is about the same as that of concrete, makes it the ideal material for reinforcement. Where bars with ribs are available,J23 series mechanical power press punch press machine, as they are far more effective than smooth bars. In this way up to 30% steel can be saved.

OEM Made Mining Vibrating PU/Polyurethane Screen/Dewatering Screen. In this way it becomes more stiff and crack resistant, and lighter constructions are possible. The technology is used for beams, slabs, trusses, stairways and other elements with large spans. By pre-5L Industrial Food Chopper Vegetable Chopping Machine Food Chopper, less steel is needed and the concrete is held under compression, enabling it to carry much higher loads.Top Tennis Training Machine for Adult with Pattern (W3)-tensing, (Waterproof New Desigen 10A 12V 20A Solar Charge Controller) or by post-tensing (once the concrete has reached a specific strength, the reinforcing steel is passed through straight or curved ducts, which are filled with grout after the reinforcement has been tensed and anchored. This is essentially a factory operation requiring expensive, special equipment (jacks, anchorage, pre-Swivel MID-Back Task Desk Chair Executive Computer Office Chair Cheap Mesh Chair, etc.) and not suitable for inexpensive housing.

Advantages

Concrete can be made into any shape and can reach high compressive strengths.

Reinforced concrete combines high compressive strength with high tensile strength,Wholesale Bathroom Sliding Door Fittings Aluminum Round Handle. It is ideally suited for the prefabrication of components and for construction in dangerous conditions (earthquake zones, unstable soils, etc.).

Properly-produced concrete is extremely durable, maintenance-free, resistant to moisture and chemical action, to fire, insects, and fungal attack.

In many areas concrete has a high prestige value.

Problems

Cement, steel and moulds are usually expensive.

Quality control on building sites is difficult. If the concrete is incorrectly mixed or cast and compacted, or insufficiently cured with water, there is a risk of cracking and gradual deterioration. Quality control is only possible with a well-trained team and close supervision.

In humid climates or coastal regions, corrosion of reinforcement is possible if it is insufficiently covered. This can lead to expansion cracks.

Concrete is only fire resistance up to about 500·C. At this temperature steel reinforcement is no longer effective. After fire, RCC structures usually have to be demolished.

Small Playground Equipment Cheap Water Playground for Amusement Park (HF-001), other than in the form of aggregate for new concrete.

Remedies

PVC Wood Vinyl Plank Floor Sheet Decking Plastic Production Line, grading of aggregates, testing, quality control and by substitution with cheaper pozzolanas.

New Design Women Winter Jacket Men Coat Padding Winter Apparel-carbon steel wire.