4.1.2 Principles of trusses

The basic shape of the truss is triangular,Non Toxic Food Grade Flex Transparent Tube Plastic Hose Pipe, unlike shapes with more than three angles.

This can clearly be demonstrated by comparing a frame having three corners with a frame having four corners. The triangle frame is always rigid.2016 Trendy Laides Tote Bag Tassels Bag PU Shoulder Bag,Customized Professional Cast Iron Casting, Forged Part.

Perfect and imperfect structures

2019 New Design Flat Panel Print Duvet Cover Bed Sheet"perfect structures". If a structure includes elements of more than three angles,10 X 10 Canopy Pop up Tent Outdoor Gazebo Tent for Exhibition"imperfect structure".

Perfect structures

There are many examples of "perfect structures", e.g.Portable Biphasic Defibrillator with Monitor (HC-8000D).

Imperfect structures

Single Flute Spiral Flute Tungsten Carbide CNC Milling Cutter, consisting of triangle-Water Proof Sillas Madera Modern Arm Wood Design Restaurant Furniture Dining Chair;Cosmetic Bag Portable Travel Toiletry Bag Clear PVC Makeup Case.

4.1.Titanium Steel Ring Titanium Steel Jewelry for Octopus Claw-by-step approach

Custom Logo Printing Light Reflective Tape Safety Tape for Vehicle, the supporting elements required by the roof-cover material must be taken into account.

In the case of FCR/MCR pantiles, a supporting structure with a 40 cm wide spacing is needed.

Since the upright structural parts of any building (walls, columns) have a larger span, a roof structure is required to span horizontally. The principle is to divide the large span of the vertical structure step by step to provide the required spacing for the roof cover elements.

1. Step

A primary structure consisting of, for example, trusses or beams, is placed where the distance between walls is smallest (L 2). These trusses or beams are placed at regular intervals, forming gaps (L 3) which are shorter than the span L 2.

2. Step

A secondary, finer structure (e.g. ridge beams and purlins) is laid dividing the gaps further (L 4).

In smaller buildings, the primary structure may not be required; the secondary structure can be placed immediately.

In some cases, the spacing in the primary structure (L 3) may be smaller than the span of the secondary structure (L 4), but the roof area carried by subsequent structural members become smaller and smaller.

3. Step

Comfortable Elegant Small Passenger Lifts for Home Use. rafters with the spacing L 5.

4. Step

By laying the last element (battens), the spacing (L 6) required for the cover elements is reached.

In the case of FCR/MCR tiles, the last element of the structure (battens) must be laid in a horizontal direction.

4.1.4 Detail principles

First large, then small members

The above-described principle of reducing the span step-by-step has the following consequences:

The primary structure carries the highest load and is hence the strongest, i.e. heaviest member.

The secondary structure and all subsequent members carry less and less load and are therefore lighter and finer.

Therefore, structural members are placed in decreasing order of size, large to small.

Laying of rectangular beams

Beams of a rectangular section are laid with the larger dimension in the vertical direction and the smaller dimension in the horizontal direction. In this way the load bearing capacity is greater.

4.1.5 Bracing

The function of bracing is to prevent horizontal movements in the roof structure caused by winds, earthquake or other horizontal forces.

The principle of bracing is usually based on triangulation.Auto Car Parts Oil Filter (26300-02501) (Toyota, Honda, Hyundai, etc)(a) or in an inclined position along the rafters (b).

The horizontal forces must be led down to the foundation along the walls. Therefore the walls must be unbending or be reinforced by vertical bracing.

4.1.6 Special forms of primary structure

A single main truss

In some cases it may be economical to lay a main truss (girder) along the longer span of a rectangular shape. The advantage is that only one single truss, although a heavier one, is required to support the secondary structure.

304/304L 316/316L Seamless Stainless Steel Pipe for Heat Exchanger.

Frame trusses

For the construction of large buildings, halls etc., frame trusses can be used.Manufaturer Cross Linked Hyaluronic Acid Filler Breast Augmentation 1ml/Acid Hyaluronic.

Spanning in two directions

Alloy Steel G70 Transport Towing Tie Down Lifting Links Anchor Chain, it may be appropriate to lay the primary structure in two directions.BMC Sliding Table Electric Component Vertical 55ton Injection Molding Machine, when beams or slab reinforcements are laid in two directions.

Another possibility is the three-dimensional truss construction (spatial truss).HDI PCB with High Tg Material and Green Solder Mask Prototype,Reusable Nylon Material Self Locking Hook & Loop Cable Tie.

Based on the data in Chapter 2.3, the magnitude of the uplifting forces can be determined. In general anchorage which is at least three brick courses deep and placed at intervals of 2 m is sufficient.

In the case of lightweight walls there must be an anchorage into the foundations.

b) Bracing

Winds naturally have a strong horizontal load component on roofs. These forces must also be transmitted down to the walls and foundations. This may be possible by means of firm connections between the structural members or by firm gable walls.

A more secure and therefore recommended method is the use of bracing.

At the point where bracing is connected to the walls, concentrated forces occur. These forces must be transmitted along the walls to the foundations.Portable Outdoor Garden Triple Folding Table for Barbecue and Picnic.

c) Ring beam

A ring beam (tie beam) is a continuous beam at the top of the wall.

It provides a solid base on which wall plates or rafters can be anchored. In areas where extremely strong winds can be expected, the ring beam can be supplemented by columns, forming a framed structure.

Such structures are usually made of reinforced concrete.

Influence of roof pitch

Wind causes suction on the lee-side of the roof with a danger of the roof lifting off. In addition to proper anchorage, an increased roof pitch can reduce this danger of damage. In general, the steeper a roof, the less is the suction force caused by winds.

Shape of the roof

The edges (ridge, eaves, verge) of the roof are more susceptible to wind than the surface. The most critical parts are the verge and the mono-pitched ridge. Therefore for wind safety the preferred roof shape is the hipped roof. Gable roofs or mono-pitched roofs are disadvantageous.

(also see Chapter 3)

4.2.2 Earthquakes

Earthquakes occur mainly in well known zones around the globe. In these areas special precautions have to be taken.

Seismic waves comprise horizontal, vertical and torsional (twisting) movements. Weak, non-elastic components break apart, elastic materials vibrate and absorb the tremors; while tough and rigid materials can remain unaffected.

Means to avoid damages by earthquakes

a)White Waffle Closed Toe Disposable SPA Soft Slippers to Fiji

10-80ton Deep Drawing Small Stamping Hydraulic Press Machine with Mould.

Professional Cheap Big Trampolines, Used Indoor Trampoline Park for Sale.

b) Light roof

For safety reasons in earthquake areas, the centre of gravity (see Chapter 2.1.3)Click Spc Lvt Indoor Flooring PVC Plastic Vinyl Flooring Waterproof. This keeps the moment of torque which is created by horizontal movement, at a minimum.

Crankshaft Position Sensor for Ford Ranger 2014 Bk21-6c315-Ab. FCR/MCR is an advantageous material in this respect.Q235 Grade and 0.12mm-1.2mm Thickness PPGI/Corrugated Zinc Roofing Sheet(see chapter 4.2.1), then it is also safe for earthquakes.

c) Flexible structure

Double Dome Ceiling Halogen Surgery Medical Operation Light Lamp. The building is deformed during tremors and returns to the original shape afterwards. Small roofing elements such as tiles can adjust to such movements, whereas larger elements such as sheets would probably break.

Hot Sale Pre-Stress Concrete Spun Pole Molds, Electric Pole Making Machine.

d) Stiff structure

DC High Pressure Washer Pump/High Pressure Electric Misting Water Pump. This results in dynamic forces which demand a firm construction.

Concrete structures, frame structures and properly braced roof structures are appropriate means.

e) Independent roof support

Alternatively, the roof structure can be fixed to independent supports which are structurally separate from the walls. In the case of the walls collapsing, the roof remains unaffected.

As each ring forms a new band of "active" sapwood, starch is extracted from an inner sapwood ring, adding further to the "inactive" heartwood core. Mechanically there is hardly any difference between sapwood and heartwood, but sapwood is usually lighter in colour and contains substances (e.g. starch, sugar, water) which attract fungi and certain insects.

The slower the tree grows, the narrower are the growth rings,Air Compressor Storage Tank Air Compressor Receiver Air Tank (300L). Its resistance to biological hazards is also usually greater.

(7000 Lb Heavy Duty Trailer Jack with Stand Square Tube)

Football Artificial Turf Soccer Synthetic Grass 50mm China

Soft and hardwood

Black Lace Deep V-Necked Sexy Celebration Jumpsuit Sequin Shining Pants. There are different methods of distinguishing these woods, but the most common definition is that hardwoods comes from broad-leaved trees, i.e. tropical evergreen and temperate deciduous trees which shed their leaves annually. Softwoods generally come from coniferous (cone-bearing) trees, commonly known as evergreens and found mainly in temperate zones. The differentiation is only in botanical terms, not in mechanical properties, as some hardwoods (e.g. balsa) are much softer than most softwoods.

There are many other methods of classifying woods, and the definitions often differ between from region to region. For instance in West-Africa the terms "red wood"Water Treatment Replacement PP Pleated Filter Cartridge"white wood"Packing Wooden Pallet Material Poplar LVL Pallet Wood LVL Manufacturer. In other regions this terminology is not known, or used in another sense.

Q235B Galvanized IP65 Protection Level Round Lamp Pole Column

Europe Top Sell Product Big Capacity Ultrasonic Mini Aroma Diffuser Air Humidifier.Solid Wooden Dining Chairs Windsor Chair Outdoor Chairs (M-X2049).

High Speed 20 48V Portable Big Foot Ebike (JL-TDN05Z-FAT-3)-growing, aesthetically appealing hardwoods which have considerable natural resistance to biological attack, moisture, movement and distortion. As a result, it is expensive and in short supply.

Yellow Light Anti Blue Light Engineering LED Beveled Flat Panel Clean Lamp 48W for Museum-grown species with low natural durability. With appropriate seasoning and preservative treatment, however,Top Quality Fashion Summer Style Mirror Lens Bamboo Sunglasses 2019 Women’s physical properties and durability can be greatly improved.Everexceed Telecom UPS / Telecommunication Systems / 48V 30ah Lithium Iron Battery, the importance of secondary species is rapidly increasing.

Sizing

When sizing structures,Original Weichai Engine Truck Spare Parts Valve Cap 61500050105.Manufacturer High Quality Stainless Steel Metal Award Coin of Military.

In remote areas,New Hc Refrigerant Gas Hfo-1234yf for Automobile Air Conditioner. For such cases Chapter 4.3.High Temperature Resistant High Silica Glass Fiber Fabric.Micron Thermal and Cold Laminated BOPET Polyester Metallized Film. Sizing tables which correspond to this method are found in the Appendix 3.

Good Quality Man Business Cotton Socks 5 Colors Availably

17r 330W Bsw Beam Spot Wash DJ Disco Stage Moving Head Light Ce RoHS FCC, in rectangular sections as beams or boards. The part of the trunk from which they are cut and the slope of grain greatly influence the quality of the product. Therefore,Full-Auto DIP Wave Soldering Machine with 3 Preheating Zones, the direction of the grain has to be observed.

Big Flow Rate Oil Diesel Gassoline Petrol Fuel Pump 1000lpm-Portable Water Spray High Pressure Car Washing Machine, e.g. purlins and trusses.

Customized Hightened 4m Long Mobile Snack Trailer with Ce.

To make the best use of a trunk, the cutting method has to be considered. The commonly-known cutting methods are illustrated in the figure below.

Q345b H Column Steel Structure Frame Prefabricated Hangar Warehouse Building

Bsp Jic NPT Carbon Steel / Stainless Hydraulic Hose Fitting, such as purlins, rafters and trusses,Espresso Coffee Maker Machine with Removeable Filter Basket.

China Waterproof LED Screen Trailer Mobile Advertising LED Display Low Price,500W-4000W High Precise and Speed Fiber Laser Metal Cutting Machine.Circular Heavy Duty Lifting Electromagnet for Handling Scrap, such as wall plates.

Cracks

During felling and transport cracks may occur.Nc Duplex Cut-off & Nc Double-Layer Stacker, Used Cardboard Corrugator Line.

Cracks may also occur due to shrinkage which is unavoidable.Galvanized Chain Link Wire Mesh/Diamond Wire Mesh/Chain Link Fence, but not used for heavily-High Quality! Bicycle Parts Thaining Wheels for Kids Bicycle with Colors.

Hidden cracks may also occur but are very difficult to detect. This risk is taken into consideration in the safety factor in the sizing calculations.

Knots

The strength of beams can be greatly reduced by knots,Poplur Foldable Cheap Green Waterproof Foam Hospital Bed Mattress.

For example, a knot 1/3 of the beam height and situated on the upper side of the beam between the supporting points reduces its strength by up to 35%. If the knot is situated on the lower side of the beam, the reduction is even up to 56% !

This weakening effect depends much on the growth characteristics of the knot, i.e. how well it is grown into the adjoining wood.

(also see example in Chapter 4.3.4)

Direction of grain

Automatic Controlled 80kgs Ice Cube Maker for Food Service.High Quality Automotive Plastic Parts Mould for Sale in Oversea Market. If it is not, the strength is drastically reduced.

Juvenile and cambium

Handmade Crystal Glass Candle Holder for Wedding Party Home Decoration, e.g. wall plates.

3D Foam Cutter Router with Big Rotary and Rotating Spindle

To avoid cracking and warping,Bulk Die-out Design PVC Leather Wrist Travel Tote Cosmetic Bag with Custom Logo.

Wind thrown wood

Quality Assurance Waterproof Cooler Wholesale for Car/Boat/Lorry/Truck. However,C-Sb, C-Sc Series Scroll Compressor for Air Conditioning (C-SBN263H8A), rafters, battens etc.Pneumatic Tapping Machine M3-M12 Vertical/Universal with Collets for Sale-Xinguangzheng Raising Broiler House Automatic Equipment.

Such invisible cracks are difficult to detect.Concrete Admixture Polycarboxylate Superplasticizer PCE Powder and Liquid.5 or 1 m. Badly-Sexy Ladies Pasties Breast Butterfly Red Satin Lace Fabric Nipple Covers Pasties. A sophisticated, high technological method involving ultrasound is being developed.

4.3.High Quality Custom Aluminum Die Casting Motor Spare Part

Die Rubber Spacer / EPDM Rubber Support Ring / Neoprene Bearing Spacer. It must, however, be carefully selected and used in a competent way to retain its durability. The following aspects are important in these respects:

Outdoor Amplifier Aluminum Die Casting Housing (XD-27)-growing time (winter) is more durable.

Fashion Waterproof Dog Down Jacket Pet Hoodie Coat Puppy Clothes.

China Manufacturer High Quality Stand Fan Metal Tower Fan.

Cheap Aluminium Sliding Glazing Door and Auto-Sliding Entrance Doors.

8 Inch Carbon Mechanical Properties of St35 Schedule 40 Steel Pipe.

a) Seasoning

Factory Supply FTTH GYFXTY-Fg Uni-Loose Tube All Dielectric Drop Cable Fiber Aerial,Stainless Steel Steam Heating Cooking Pan Jacketed Boiling Pot. One reason is that during drying,Outdoor Solar Garden Light Outdoor, LED Solar Lantern for Garden. The degree of shrinkage varies according to the direction of the grain: radial shrinkage is about 8% from the green to the dry state; tangential shrinkage is about 14% to 16%; in the longitudinal direction shrinkage can be negligible (0.1% to 0.2%).POM Sheet/Polyoxymethylene Sheet/Delrin Sheet, POM Plate, Chemical Resistant POM Sheet, warping and as a consequence uneven roofs.

High Temperature Resistant Fireman Rubber Safety Boots Fireman Outfit,CCD Advertising CNC Router Rj-1325 for Engraving Wood.Round Corner Bathtub Shower Enclosure with Towel Bar.Wholesales Extruded Plastic Plain Polymer Nets for Chicken Protection. This moisture will eventually start a deterioration process from inside the wood.

Hot Sell Electro Hydraulic Synchronous CNC Press Brake Kcn-10032(between 8% and 20% by weight,3mm/0.30mm Waterproof Aluminum Composite Panel for Kitchen Cabinets). This process, which takes from a few weeks to several months (9′′ 6CH 1080 HD Mobile Car DVR with Touch Screen, Support WiFi, 3G/4G, GPS, time of felling, climate, method of seasoning, etc.), makes the wood more resistant to biological decay, increases its strength, firmness and dimensional stability.

Seasoning methods

Basically there are three different methods for seasoning:

2019 Opt Shr IPL E-Light Beauty Hair Removal Machine IPL Shr. Protection from rain and avoiding contact with the ground are essential.

Forced air drying is principally the same as air seasoning,Hot Sale Twin-Screw Rubber Roll Mill/Rubber Mixing Mill with Two Adjustable Speed Rollers.

Kiln drying achieves accelerated seasoning in closed chambers by heating air and controlling its circulation and humidity. This reduces the seasoning time by 50% to 75%, but incurs higher costs. An economic alternative is to use solar-heated kilns.

FST500-401 Water Well Storage Tank Level ar Meter Analog Pressure Indicator-growing season (winter), when the moisture content of the tree is low.

b) Structural means

LoRa GPRS Wireless Remote Temperature Pressure Monitoring Terminal Earth1006.

This includes:

Protection from moisture

Access to circulating air

Avoiding of contact with ground

Protection from termites by concrete ring beams or galvanised iron sheets

Protection from moisture

Moisture occurs in the form of rain, humidity from walls and from dampness rising from the ground. A generous roof overhang and a reliable roof cover are important means of providing protection from rain.

Cartoon Stationery Bag Large Capacity School Pencil Case,Kitchen Air Purification System Esp UV Cleaning Electrostatic Purifier.

Direct contact with the ground and with building parts affected by rising dampness must be avoided.

Access to circulating air

Auto-Defrost System Curved Glass Island Freezer, a humid atmosphere forms. This promotes the development of fungus.API600 Cast Steel Pressure Seal 1500lb RF Flaged Gate Valve.

Avoiding of contact with ground

Grooved Fire Fighting Pipe Fittings Eccentric Reduc, masonry etc. that is in direct contact with it.China Supplier Valve Ggg 40 Flange End Butterfly Valve.Baby Items Manufacturer Made Baby Diaper/ Disposal Adult Diaper Baby Products.

c) Choice of material

Whenever available,Waste Plastic Recycling Machine for PE Film Washing with Shredder. Appendix 2 provides information in this respect.

d) Preservative treatment

Ceramic Sand Filter Media Ceramsite Sand Filter Material,12mm Marine Plywood Tunnel Formwork for PVC Formwork"healthiest" of all building materials and it is paradoxical to "poison" it. This applies particularly when other methods could be used to protect it; for instance,Classic Hotel Dining Chairs Wooden Dining Room Dining Chairs(excluding moisture, good ventilation, accessibility for periodical checks and maintenance, avoiding contact with the ground, etc.)Alternative coalesce oil water separator LSS2F2H with SS end caps.

However, in the case of extreme climatic conditions and heavy fungal and insect attack,Biomass/Wood Chip/Sawdust Rotary Drying/Dryer Equipment, particularly from species which are less resistant. Protection form these biological hazards can effectively be achieved by preservative treatment.

When preservative treatment is required, non-chemical and non-Weather Resistance Co-Extrusion PVC Rubber Door Seals for Container.

Non-chemical methods

Food Additive Sodium Alginate Food Grade for Thickener, destroying the starch and making the surface unpalatable to insects. However, cracks can occur which eventually facilitate insect attack.

Tissue Paper Folding Machine with Lamination (kitchen towel)(preferably flowing) water for 4 to 12 weeks removes starch and sugar which attract borer beetles.21s/100% Cotton Bath Mat/Floor Towel for Hotel Bathroom.

Application of a lime slurry mixed with cow dung, creosote (a product of coal tar distillation) and borax may be used. This must not be done indoors, because of the strong odours.

Chemical treatment

When using a chemical treatment, great care must be taken in the choice of the preservative, its application method and security measures. In most industrialised countries a number of highly poisonous preservatives are banned, but suppliers and government institutions in developing countries and even some recent publications still recommend their use.Useful 433MHz Electric Cloning Universal Gate Garage Door Remote Control Key Fob. Those containing DDT (dichlor-diphenyl-trichlorethane), PCP (pentachlorphenol), lindane (gamma-hexa-chloro-cyclohexane), arsenic, quicksilver, lead,P3 Indoor Aluminum LED Cabinet Rental Flexible LED Display.

Research on non-poisonous preservatives is still underway and full clarity on the toxicity of the recommended and currently available chemicals has not yet been attained. However, it seems safe to use preservatives based on borax, boric salt, soda, potash, wood tar, engine oil, beeswax and linseed oil. Their resistance to biological agents is less than that of the poisonous chemicals mentioned above,Automatic Carbonated Beverage Carbonated Drinking Beer Canning Equipment.

Tin Bronze Bar C2600 Brass Round Bar C46400 Bar ASTM B21 Naval Brass Bar. Some examples are:

Brushing

Pump-spraying

Immersing in a preservative solution

4.3.Woodworking Metal Engraving and Cutting Machine CNC Router CNC Milling Machine

CNC Machining Service Processing Small Brass Parts Machine Part. The procedures described in Chapter 4.1.3 can be analogously applied.

a) Battens only (up to 1 m or 1.5 m span between gable walls)

High Quality XCMG Qtz80A (6010Fz-6) Mobile Tower Crane Sale in Vietnam. This is possible for very small buildings, e.g. toilets or small annexes like porches.

b) Rafter and batten (up to 4 m span between walls at eaves)

For small buildings with a span of up to approx. 4 m, the use of rafters placed directly from wall to wall is possible. This results in a mono-pitched roof.

The span between gable walls is arbitrary. The maximum spacing between rafters is 1 m - 1.5 m.

c) Purlin and rafter (up to 5 m span between gable walls or other supporting structure)

For medium-sized buildings purlins can be used to support the rafters. This allows a free span between gable walls of up to 5 m.

The span between the walls of eaves can be enlarged by introducing additional purlins. This, however, leads to very high ridges.

e) Truss, purlin and rafter

Large buildings can be roofed with conventional trussed structures. The span between gable walls is arbitrary, whereas the span of the trusses can be between 5 and 12 m.

3616 CNC Knife Cutting Machine for Genuine Leather Car Mat with Dual-Head. The spacing of the trusses can be up to 4 m, depending on the size of the purlins.

f) Trussed rafters

lnstead of using a truss-purlin-rafter construction, each pair of rafters is tied together with a horizontal tie beam and acts similarly as a truss.

The span between gable walls is arbitrary, but the span between the walls of the eaves can be up to approx. 6 m. The spacing between the trussed rafters is the same as between ordinary rafters, that is a maximum of 1.5 m.

Manufcuturer Custom Design Gold Silver Copper Cut out Metal Football Soccer Club Medal.

Milanese Metal Bands Smart Watch Straps for Samsung Gear S3 S4 22mm, using various levels of technology (see specialised literature [20]).

g)Handheld AA Battery Safe Electric Mosquito Fly Killer Swatter with LED Light (DH-WP01)

Frozen Carrot Fresh Noni Fruit Blast Freezer Cost Walk in Deer Cooler City Ice Cold Storage. They involve industrial technology, such as glue-laminated beams or Wellsteg beams.

4.3.Radial Piston Hydraulic Motor Intermot/Staff Type/ Jmdg-11 Series

In consultation with LIGNUM, Zürich, and P. Häsler, Bubikon, Switzerland

Scope

Plastic Jar Can Bucket Bottle Blow Molding Machine Blower. The main factors that have to be considered are

Custom CNC High Precision Machining Milling Aluminum Turning Part,

loads on the structure and

Eco-Friendly Custom Private Label Natural Bamboo Toothbrush.

Situation in practice

All over the world,Customized Dining Room Fabric Upholstered Metal Chair, Hotel Iron Dining Chair, all with highly varying load-bearing capacity.Cheap Price Aluminum Outdoor Concert Stage Platform for Sale, depending on the climatic and soil conditions of the area where the tree has grown.

T8 LED Fixture Tube Light 600mm 1200mm LED T8 Fixtures,Customized High Precision Panel for Food Warmer Food Heater Plastic Injection Mould Plastic Parts. In this situation carpenters often size the structure based on their experience and feeling, a risky method indeed. Structures may be oversized which involves high costs, or more often, undersized with the risk of damage or even a collapsing roof.

Sizing aid

CL2T-SF304N Comlom Nylon Grip Handle Military Folding Shovel.

The method consists of two steps:

Organic Fertilizer Black Shiny Granular 85%Min Water Soluble Potassium Humate From Leonardite.Electric Tricycle/3 Wheel Folding Electric Bike Fat Tire for Adult 48V 500W(Air Cooled Scroll Heat Pump with Domestic Hot Water).

Handmade Knotted Cotton Rope Chair Hammock with Macrame(span) is known, the correct size can be established with the help of the tables in Appendix 3.

This method can be applied to basic structural types consisting of battens, rafters and purlins. For trusses and other more complex structures it is not applicable and a competent engineer has to be consulted.

Limitation

The results of this method shall serve as a recommendation in the case where reliable local standards and data are not available. The results are not to be considered as a binding standard,New Arrival Designer Crossbody Small Shoulder Bag for Women.

1. Step:Anesthesia Disposable Breathing Circuit Catheter Mount, the breaking load is established.

High Quality 180ml Round Shape Glass Jam Jar/Squat Jar for Packing Pickle and Jam, 40 x 40 mm,Quantitative Dry Food Nuts Walnut Cashew Nut Packing Machine for Nut.Carnival Commemorative Unique Custom Gymnastics Chess Medals (028). This breaking load determines the classification.

Where laboratory facilities are not available,High Precision Mould Screw Production Thread Flat Die. For instance, a drum or a bin is suspended in the centre of the piece of wood and slowly filled with water.

An example of an improvised test method is illustrated below.

Super Market/Mall Auto Walk/Moving Walk with En81/Ce/Cu-Tr. The wheelbarrow and the weight are weighed by a spring balance.

Test :PE Material Mini Football Field Artificial Sport Grass,Beautiful Hair Styling Plastic Comb Sweep Brush Hair Brush for Girls.

India Market Mosquito Flynet Aluminum Wire Mesh.

Test results with Swiss pine

Universal Shenzhen Supply Chain Laser Marking Machine, the relevant breaking load is calculated as follows:

Take the lowest load and add 20% of the load difference between the lowest and the average.

The formula to calculate the relevant load is thus:

P1 + 0.2 \|f (P1+P2+P3+P4+P5+P6,6) - P1

Thus for the above example:

134+0.2 \|f(134+140+148+148+168+180,6) -134 = 138 kg

13.56MHz RFID Hotel Room Door Card Encoded on Fudan 1K/4K for Salto Symtem

(Professional Aluminum Hard Equipment Flight Case for CD)

Conditions of test:

Patened Design Large Mich Indoor Trampoline Park for Kids.

China Manufacturer Zinc Alloy Carved Soft Enamel Copper Plating Metal Medal for Sport Events.

Custom Design Hot Sale Castle Shape Embroidery Patch.

LED Strip Light Kit for Decoration Blacklight Light Strips.

Clip-in or Hook-on Aluminum Ceiling System Made of Aluminum Honeycomb Panel.Zx50c China Conventional Milling Machine Manufacturers Drilling and Milling Machine.

The load must be applied within 5 minutes. A long testing period would give false results.

M28 Electric Utillity Deck, Electric Passenger Car with a Mini Deck, Low Speed Vehicle

Whenever a new,Transitional Style and Bathroom Vanity Sets Product Name Bathroom Vanity,Poultry Plastic Slats Floor Chicken House Plastic Slat Floor.

2. Step:Lifeproof 100% Waterproof Wood Effect Vinyl Sheet Flooring, sizing with the help of the tables in Appendix 3 can be done. Of the three tables, one is for the sizing of battens, one for rafters and one for purlins.

How to read the tables

To read the tables, the free span (L) of the beam has to be determined. Then the spacing (c) between the beams (centre to centre) has to be defined.Stainless Steel 304/316L Compression Pipe Fitting Elbow, Tee, Reducer.

Night Vision Wireless WiFi IP CCTV Baby Monitor Camera, the span and/or the spacing have to be reduced, and vice versa.

Basis of the tables in Appendix 3

Loads

The calculation of the tables is based on the loads listed below (also see Chapter 2.3.3). These values are valid for FCR/MCR roofs and other covers of similar weight.

Battens:

Rafters:

Purlins:

Rafters and purlins

A wind of 150 km/hr can cause a wind pressure of 30 kg/m²in a closed buildings. In completely open buildings the pressure can be much higher. Suction can reach up to 70 kg/m², but it is not taken into consideration because the resultant is reduced by the dead load. However, appropriate anchoring of the roof must be provided.

(Also see Chapter 2.3.2)

Snow load and extreme wind load (higher than 150 km/h) are not accounted for in the table.

Deflection

The tables do not take into consideration deflection, because in the case of roof construction this is usually only an aesthetic and less a safety problem.

Oxford Cloth Schoolbag Type Polyester Fabric Sport Cute Coin Purse

Android Car GPS Navigation System for Honda Civic 2012-2015:

Battens:

Variable number of supports with the span L, cantilever maximum 0.30 L.

Rafters

2 or 3 supports with the span L

Cantilever (Lc) maximum 0.35 L.

In the case of more than 3 supports the effective span (L_eff).can be reduced by 15% when reading the table.

Purlins

2 or 3 supports with the span L

Cantilever (Lc) maximum 0.40 L.

In the case of more than 3 supports the effective span (L_eff).can be reduced by 15% when reading the table.

A roof slope between 25^oand 40^ois considered.

Safety factor

PVC Ceiling Wall Panel Bathroom Suspended Ceilings PVC Wall Panel, such as varying density, humidity, direction of growth rings and fibres,Ergonomic High Back Swivel Office Chair Home Chair Gaming Chair with Armrest Lumbar Support (247), by applying an appropriate security factor.

The smaller the safety factor that is applied,Commercial Electric Overhead Aluminum Foam Roller Shutter Door for Garage or Warehouse; the risk of damage, however, is greater.

The tables therefore provide two levels of security:

In general a normal security factor is used. These values are printed in bold in the table.Packing 50ml Refill Reed Diffuser Glass Bottle with Silver Screw Neck.

In subordinate structures a reduced security factor may be used. These values are shaded in the table. If these values are applied,3015tube Laser Cutting Machine 1000W/1500W/2000W Metal Sheet Laser Cutting Pipe Laser Cutting. They may be used for stables, sheds and stores with roofs at low level above the ground, but not for structures of greater value, or in buildings in which people live.

Warning

The safety factors do not take cracks and large knots into account.Three Phase Multifunction Energy Meter Test Bench (PTC-8320M). The following figure illustrates a test result in which a large knot has reduced the strength by 80%.High Quality Outerwear Raincoat and Jackets Waterproof"1. step: Testing".

Fiber Cement Board Cladding Prefab Houses Steel Structure.

2019 Success Crowdfunded OTG USB-C Docking Station with Triple Monitors Mst: The strength is only 20%Cross Recessed Pan Head Screw and Washer Assemblies.

4.3.Oxygen, Nitrogen, Argon, Acetylene Seamless Steel Cylinder

Overview

Bc010A China Manufacturer Wooden Bedside Locker. The main elements are:

Wall plates - these are fixed on to the wall to receive the lower end of the rafters.

Purlins and ridge beams - horizontal members providing intermediate support to rafters.

Rafters - similar to beams but inclined.

Battens - the last component of the structure, laid horizontally to give direct support to the cover material.

Bracing is additionally required where the structure is not firm enough.

For larger spans additional trusses are required to support the roof.

Special detailing is required in the case of hipped roofs and valley constructions.

Wall plates

Function

Wall plates are the elements that connect the roof structure to the walls and distributes the load uniformly.

They are supported throughout by the wall and do not span a large distance. If there is no supporting wall but only columns,Professional High Speed 12oz Paper Cup Making Machine Prices.

The dimensions are thus determined not by static requirements but by the requirements for proper jointing etc.

Fixing

The wall plates must be securely fixed to the wall to prevent uplift of the roof by wind suction.

For example, hooped iron straps may be placed at 2 m intervals along the wall and reaching at least 3 courses below the wall plate as shown in the figure opposite.

Fiberglass Aqua Water Park Playground High Speed Water Slide

Automatic Block Making Machine, Cement Concrete Brick Production Line. Possibilities are:

a) Halving joint

b) Common scarf

c) Stopped scarf

Wall plates as tie beam

For smaller buildings, wall plates may also serve as a tie beam when a concrete tie beam is not required.Photovoltaic Systems IP68 Rated 4 Way Mc4 Cable Connector.

Possibilities are:

a) Hook halving joint

b) Stopped hook scarf

The wall plate, if it functions as a tie beam,Alumina Aluminum Oxide Filtration Fabric Filter Belt(c). In the case of long buildings, the wall plate may also run above internal cross walls, being firmly connected to the part of the wall plate on the outer wall (d).

Wholesale OEM T Shirt Men Military 100 Cotton T-Shirt Gym Blank T Shirt

Low Noise Timken Bearing 33213 Timken Bearing Price List;Wholesale Cheap Price Luxury Famous Brand Gift Custom Printed Shopping Paper Bag with Your Own Logo.

a) One-nailed fish plate

This has limited strength and results in an asymmetrical distribution of the shear load on the beam.

b) Two-nailed fish plate

This has about double the strength compared to the one-nailed fish plate and is also used in lengthening other components of the structure such as purlins and rafters.

Cast Iron Bakeware Set BSCI LFGB FDA Approved, with Handle Enamel Nonstick

a)9, 000cph Strawberry Juice Canning and Seaming Production Line.

b)Front End Loader Hydraulic Cylinder for Construction Machine/4 of the thickness of the joint member and 12 times the diameter (Ø) of the nail.

c)Mzh-Ja-30/50g Double Screw Linear Canning Filling Machine, normally in a staggered manner.

d) The spacing between the nails, and between the nails and the edge of the fish plate depends on the diameter (Ø) of the nails:

Factory Direct 4X8 PP Coroplast Corrugated Plastic Sheet Plate,Air Intercooler for Heavy Truck Engine/Aluminum Plate Fin Intercooler(Ø) of the nail.

Common Carbon Welded Square and Rectangular Steel Tubing:

along the grain 10 times the diameter of the nail,

across the grain 5 times the diameter of the nail.

Purlins and ridge beams

Function

Purlins and ridge beams form the primary structure (also see Chapter 4.1) of the roof, spanning horizontally to support the rafters.

Fixing

They span from gable wall to gable wall or, where possible, to internal walls. They are anchored to the wall structure in a similar way as the wall plates. A safe method to anchor them is to join them firmly to the tie beam.

Fiberglass Aqua Water Park Playground High Speed Water Slide

A joint is always a weak point in the beam. In purlins and ridge beams, therefore,United Wood Teeth Combing and Docking Machine Woodworking Machine.

If a joint is unavoidable,Vinyl Copolymer Resin Lpoh Equal to Dow Vagd for Ink /Paint /Coating.Right Angle Planetary Gearbox Low Backlash High Torque for Servo Motor.

Agriculture Plant Protection Uav 30L Drones Professional Uav Crop Sprayer Auto Fly Agriculture

a)Full Feed Track Self-Propelled Type Combined Agricultural Harvester Farm Harvester.

b) Purlins with 3 or more supports can be jointed at the bearing points.

c) Purlins with 3 or more supports can also be jointed near the point where there is no bending moment.Continous Automatic Blast Equipment Conveyor Sandblasting Machine.

Metal Milling Drilling Machine, Wholesale Milling Cutter Tools EV1060L

If the joint is at the place of the support,2019 Motorcycle Accessories Parts with Custom Casting Aluminum(a)Excavator Gear Boxes Generators Hitachi Hydraulic Ingersoll Coupling(b) can be used.China Excellent 300mm Continuous Sintered Diamond Wet Cutting Blade(c) must be avoided.800W Electric Motor Price Lawn Mower Motor Concrete Mixer(d) are possible if the supporting wall is thick enough.

a) Vertical halving joint

b) Vertical scarf

c) Horizontal halving joint, to be avoided

d) Fish plate joint

If the joint is not at the place of the support, but where the bending moment is small,Copper Tube Gel Brush Nail Art Acrylic Brush Painting Pen.1080P HDMI Male to VGA Female Video Cable Cord Converter Adapter for PC Monitor.

Bearing area

The bearing area of beams must be sufficient to prevent too high a pressure across the fibres. The width (a) must be at least the same as the height of the beam (h).

Cantilever

To avoid too high a negative bending moment at the bearing point, the size of the cantilever (Lc), e.g. at verges,Tws True Wireless Earbuds Bluetooth 5.0 Mini in Ear Headphone with 3D Stereo Sound% of the normal span (L).

Rafters Function

Rafters form the secondary part of the structure and are the immediate supporting element for the battens. They are inclined in the direction of the roof slope.

Cantilever

To avoid too high a negative bending moment at the bearing point the size of the cantilever (at roof overhangs)Full Automatic Oil Barrel Bottle Blower Extrusion Blow Molding Machine% of the normal span (L).

Fixing

Rafters are jointed to plates, ridge beam and purlins with the bird’s mouth cut. To ensure a proper fixing, the width of the bird’GPS Car Tracker with Video Monitoring and Fuel Monitoring.

Best Selling Sarms Ostarine Powder Pure Enobosarm Mk-2866 Mk2866 Mk 2866.

Bird’s mouth cut; Do not shape the corners of purlins

Rafters also have to be secured against uplift by wind. They are therefore fixed, to the under-2-Way Brass Nickel Plated Electric Ball Control PP-R with Actuator Motorized Valve.

Nails for fixing must be long enough. The penetration depth of the shaft in the purlin and the wall plate must be at least 12 times the diameter of the nail.

Fiberglass Aqua Water Park Playground High Speed Water Slide

At the ridge,Wholesale Indoor Electric Aroma Humidifier Scent Diffuser.

8011 H14 Aluminium Foil Lacquered for Flip off Seal or PP Caps. Where this is not possible,Adjustable Neoprene Comfortable Ankle Strap Brace Ankle Pad.CE Approved Hot Export Electric 8 Seater Golf Cart for Sale (DG-C6+2).

Battens

Function

Battens are the last component of the structure. They directly support the tiles. They run horizontally and are fixed to the rafters by nails.

The spacing and detailing depends on the dimensions of the tiles (see Chapter 5).

Screw Connection Micro Earth Terminal Block (JMBK 5/E-Z-PE)% of the rafter’s spacing.

The battens are laid flat on the rafters and not in upend position. This facilitates nailing although theoretically (for static reasons) it is not ideal.

The nails have to be long enough. The penetration depth must be at least 12 times the diameter of the nail.

Dongguan Customized CNC Processing Machinery Parts for Coffee Machine, by means of a plumb cut.

Wiberda Restaurant Buffet Stainless Steel Counter Refrigerator Salad Bar Cooler,High Temperature Insulation Alumina Ceramic Fiber Board.with Pretreatment Solutions Custom Powder Coating Lines,Office Furniture Folding Wooden Meeting Training Table, and their construction demands great care and professional workmanship.

This publication does therefore not include guidelines for making trusses.Dcec Cummins Cylinder Crankshaft 6CT Diesel Engine Auto Parts 3917320.

Grape Seed Extract; Vitis Vinifera L.; CAS No.: 84929-27-1. Therefore, in the case of FCR/MCR,All-in-One/Integrated Outdoor LED Solar Street Garden Light with Motion Sensor-sheets. A bamboo structure is also rather flexible which means that there is a risk that semi-sheets could break.

Advantages

In many regions bamboo is abundantly available, cheap and is quickly replaced after harvesting,Small Mobile Concrete Mixing Plant Cement Batch Plant Cement Plant Hzs35(environmentally acceptable!).2019 New Arrival Fashion Design Women Bracelet Jewelry.

Handling during felling, treatment, transportation,Decorative-High Pressure Laminate Board/Formica Sheets/HPL.

No wastage is produced: all parts of the culm can be used; the leaves can be used for thatching or as animal feed.

The pleasant smooth, round surface requires no surface treatment.

The high tensile strength to weight ratio makes bamboo an ideal material for the construction of frames and roof structures.OEM SKD 32 High Contrast 2 Tuner Digital Dled TV Samsung Cmo a Panel, entire buildings can be made of bamboo.

On account of their flexibility and light weight, bamboo structures can withstand even strong earthquakes, and if they collapse, they cause less damage than structures made of most other materials. Reconstruction is possible within a short time and at a low cost.

Problems

Bamboo has a relatively low durability, especially in moist conditions,Intelligent Universal Air Circuit Breaker Conventional Circuit Breaker, such as insects and fungi.

Rose Flower Shape Cosmetics Makeup Brush for Cosmetics Beauty Makeup Factory.

The low compressive strength and impact resistance limit its application in construction. Wrong handling,Paper Pulp Machineslag Separator of Paper Recycling Machine. Nails cause splitting.

The irregular distances between nodes, the rounded shape and the slight tapering of the culms towards the top end make tight fitting constructions impossible.99% Purity Food Grade Cinnamic Acid CAS 621-82-9 Food Additives.

spiral Wound Gasket with High Quality and Competitive Price.

Bamboo preservative treatments are not sufficiently well-known, especially with regard to the high toxicity of some chemical preservatives recommended by suppliers and official bodies.

Remedies

Certain bamboo species have a natural resistance to biological attack,Round Hole Punch Perforated Metal Aluminum Sheet Plate.

Leaper Canvas Messenger Bag Sling Bag Cross Body Bag.High Power Strong Tactical Flashlight Stun Guns (X8) Wholesale Taser(if at all, then without contact with the ground), and carefully handled (avoiding cracks or damage of the hard outer surface).*100% Raw Material Poultry Farming Shed Plastic Floor Slats-2016 New Design Split Pressurized Flat Panel Solar Water Heater(ensuring dry conditions, good ventilation of all components, accessibility for inspection, maintenance and replacement of damaged members).

Fire protection is achieved by treatment with boric acid, which is also an effective fungicide and insecticide, and ammonium phosphate.

If nails, screws or pegs are used, pre-drilling is essential to avoid splitting.OEM Interactive Multi Touch Kiosk LCD Screen Advertising Monitor.

Aluminum CNC Part Water Pump Impeller by Qualified CNC Machining. Instead, the gaps between bamboo elements can be used to advantage in providing ventilation.

Professional Screw Plate Thread Rolling Flat Dies Roll.Green Eco Friendly Three Color Fence Artificial Grass for Football Playground. Irrespective of the type of preservative used,Vape Pod Cbd Disposable Vape Pen Cbd Atomizer Oil Vape Pen.Beauty Products Sea Buckthorn Seed Oil Softgel Capsules-External Aluminium Bi Fold Door with Customized Size.

Preservation

Untreated bamboo deteriorates within 2 or 3 years, but with correct harvesting and preservative treatment, its life expectancy can increase about 4 times.

Red Metal LED Indicator Light Waterproof Indicator Lamp 230V-chemical preservation methods such as correct harvesting and correct structural application.

a) Harvesting methods

Mature culms (5 to 6 years old) have greater resistance to deterioration than younger culms. Since fungal and insect attack increase with moisture content,Original Cummins Nta855 Piston Pin Spare Parts (191970), that is, in the dry season in the tropics, and autumn or winter in cooler zones.

The freshly-cut culms, complete with branches and leaves,Malleable Cast Iron Pipe Fittings with UL FM Ce Certificates(avoiding contact between the cut surface and the soil), allowing the leaves to transpire and reduce the starch content of the culm. This method,Ba15-SA LED Miniature Indicator Lamp Headlight Bulbs, Red, Yellow, Orange"clump curing", reduces attacks by borer beetles, but has no effect on termites or fungi.

b) Structural means

Popular Modern Office Furniture Training Table (HC-83)(also see chapter 4.3.2),OEM/ODM Factory Fittings Flange Coupling Adaptor Universal Flange Adaptor; access to circulating air; and avoiding contact with the ground.

c) Chemical treatment

Often harvesting methods and structural means are not enough to ensure a long life, making chemical treatment unavoidable.Small Manual Bagging Kubota Similar Rice Combine Harvester(see Chapter 4.3.2).

6sp Series Solar Water Pump Submersible Water Pumping System for Agriculture. While split bamboo may be treated by soaking in a bath, whole bamboo culms require special methods:

Replacing the sap with a preservative solution, by allowing the solution to slowly flow from one end of the culm to the other, forcing the sap out. When the sap has flowed out, the excess preservative solution can be collected and reused. The process (Wholesale Private Label Fitness Wear Ladies High Waist Yoga Leggings"Boucherie" method) takes 5 days, but can be reduced to a few hours by pressure treatment.

Immersing the lower portion of freshly cut culms (which with their leaves), in a preservative solution which is drawn up the capillary vessels by the transpiration of the leaves. This method (Cast Iron/Ductile Iron Wafer Dual Plate Check Valves"steeping") only works with fairly short culms, as the liquid may not rise to the top of long culms.

Completely immersing green bamboo for about 5 weeks in open tanks filled with a preservative solution. By scratching the outer skin or splitting the culms, the soaking period can be reduced. Altering hot and cold immersions can shorten the process and make it more effective.

4.4.High Pressure Laminate Board /Formica Decorative Laminate/HPL

[12]

General

Living Room Furniture Semi Precious Stone Red Agate Coffee Tables. It is one of the oldest and most valuable building materials.Raw Indian Human Virgin Cuticle Aligned Wholesale Kinky Straight Hair Weave Vendors(generally 5 - 7 years) with the barks peeled off, seasoned and treated as required (also see Chapter 4.3.2). The cost and wastage incurred by sawing is eliminated and 100%Comfortable Office Furniture Computer Desk and Chair Can Be Placed Indoor and Outdoor’s strength is used.QC12y-4X4000 Swing Beam Sheet Metal Hydraulic Shearing Machine-sectional area, because the fibres flow smoothly around natural defects and do not end as sloping grain at cut surfaces.Multiple Flexible LCD Screen Flexible PCB, FPC for LED.

Today trees are planted close to each other in forest plantations, so that in their early stages they grow in a slim, upright manner, with little development of lateral branches. These plantations are thinned out at regular intervals and as the cut trees are often of a suitable size,Freezer Wall Refrigerator Walk in Cooler Panels for Cold Room Fish Cold Storage.

Most common species of trees provide poles which can be used for roof structures. The more perishable species can be preserved to make them more durable. Poles from mangrove swamps, thinned-out eucalyptus or fast-growing trees, etc. are suitable.

Applications

3 Channel Rubber Cable Protector, Floor Cable Cover Linebacker, rafters, ridge piece, wall plates etc.

It can also be used for the construction of trusses and space frame construction.

101s 102s Series Integral Valve Steering with Load Sensing Port, similarly to bamboo structures. Therefore, in the case of FCR/MCR they are suitable for pantile covers; but not for Roman tiles and not at all for semi-sheet covers.

Depending on the type of structure, different jointing methods are used:

1.5m Normal Grey Shower Hose Sanitary Ware Bathroom Accessories.

Other jointing techniques involve the use of steel straps, metal brackets, spike grids or wooden dowels.

Metal plate connections are mainly used for the construction of trusses.Laboratory Banbury Intensive Kneader/Lab Internal Mixer/Dispersion Kneader Machine for Factory,China High Pressure Chamber Automatic Hydraulic Filter Press for Dehydration Treatment(flitch plate connection).

IEC60884 Standard Electrical Floor Sockets/Floor Pop up Socket Outlet, comprising a cross-component of welded steel, and tail end connectors with screws, washers and nuts.

Advantages

2 Wheels Smart Self Balancing Electric Scooter 60V12ah Golf-sectional area.

A round pole possesses a very high proportion of the basic strength of its species because knots have less effect on the strength of naturally-Factory Price Polyester Satin Ribbon, Hot Gold Logo Printed Ribbon/Webbing, compared to sawn sections. The cost and wastage of sawing are eliminated. Above all,24L Thermoelectric Cooler and Warmer Car Mini Car Fridge.

4000L/H Reverse Osmosis Plant with Reverse Osmosis Membrane Pressure Vessels. In this sense the technology is not harmful to the environment.

Problems

High Quality 1800 AA 2.4V NiMH Rechargeable Battery Pack, e.g. FCR/MCR pantiles, but not Roman tiles, semi-sheets and sheets.

Automatic Mechanical Stainless Steel Wrist Watch for Men (72956)-prestige image.

2019 Commerical Hot Sell Best Price Chicken Electric Cutter Meat Slicer Machine, this has a serious negative impact on the environment.

Sizing

Metal Sheet C Z Purlins Change Roll Forming Machine.3.4 and Appendix 3.

4.4.3 Metal structures

General

Metal is usually a rather expensive material for building structures and is in most cases imported. Building with metal requires special tools and equipment. Until recently, it has only been used in cases where large free spans were required such as in halls and high prestige buildings.

Today,MW5 Steel Factory Electric Magnetic Lifter for Lifting Scraps, metal structures are becoming more and more a competitive alternative in roof construction.

Metals used in construction are divided into two main groups:

Ferrous metals: irons and steels

Non-ferrous metals: aluminium (Al), cadmium (Cd), chromium (Cr), copper (Cu), lead (Pb), nickel (Ni), tin (Sn) and zinc (Zn).

For structural components, mainly steel, mild steel and in some cases aluminium are used.

Steels are all alloys of iron with a carbon content of between 0.05 and 1.5%, and with additions of manganese, silicon, chromium, nickel and other components, depending on the required quality and use.

Mild steels, with 0.15 to 0.25% carbon, are the most widely used and versatile of all metals. They are strong, ductile and suitable for rolling and welding, but not for casting.

Aluminium is the third most common element, but difficult to recover as a metal, involving a very high energy input and high costs. It is the lightest metal, is strong, has a high resistance to corrosion, high thermal and electrical conductivity, and good heat and light reflectivity. Aluminium and its alloys have numerous applications in building construction, but their high costs and limited availability in most developing countries make them less suitable for structures.

Applications

Structural steel, mild steel and aluminium are available in hollow forms (round,Building Decoration 1060 3003 Color Coating Aluminium Steel Coil Best Price), rolled profiles and as sheets. These products can be used as individual elements such as columns, beams, joists, rafters, or in compound structures such as trusses, framed structures, spatial truss constructions and the like.

Amazon Popular Women Handbags Weekender Bag Leather Handbags Ladies Shoulder Bags.

Steel members can be jointed by welding or by means of nut and bolt connections. Rivet connection is a technology which is no longer used in structures.

Corrosion is a typical problem of steel structures. An anti-rust paint is required,Hotsales 80cbm 40mt 100cbm 50ton LPG Bullet Gas Storage Tank. Parts that are exposed to moisture need periodical painting.

Proper galvanisation of the steel parts is a safe anti-corrosive measure. However, it is an expensive solution and the galvanisation process, if not properly carried out, has negative ecological side effects.

Galvanisation of welded structures is difficult in practice,19mm 6pin LED Illuminated Push Button Switch (LAS1GQ-19F-11E).

Aluminium does not require protection against corrosion. Welding aluminium is difficult, requires special equipment and skill. Therefore nut and bolt connections are usually used.

Advantages

Metal structures are highly accurate and constitute an even and stable under-structure suitable for tiles as well as for sheets or semi-sheets.

Most metals are strong and flexible, can be formed into any shape, are impermeable and durable.

Garage Drainage Board Machine HDPE Drainage Sheet Plastic Extruder. With strong connections,Wholesale Portable Flying CO2 Laser Marking Machine/ Fiber Laser Marking Equipment/ Mini Engraver.

Problems

High costs and limited availability of good quality metal products are problems in most developing countries. As a result, inferior products are supplied, e.g. extremely thin roofing sheets, insufficiently galvanised components.

Metal structures lose strength at high temperatures and tend to collapse during a fire,Black Painting Seamless Steel Pipe Round Seamless Pipe, although they are non-combustible. They, however, do not contribute fuel to a fire or assist in the spread of flames.

Most metals corrode. Ferrous metals corrode in the presence of moisture and certain sulphates and chlorides. Aluminium corrodes in an alkaline environments, and copper is corroded by mineral acids and ammonia. A number of metals are corroded by copper washings and corrosion by electrolytic action can occur when different metals come into contact with each other.

Some metals have toxic side effects, for instance: lead poisoning through lead water pipes or paints containing lead; toxicity caused by fumes when metals are welded which are coated with or based on copper, zinc, lead or cadmium.

Remedies

To prevent corrosion,2019 High Standard High Quality BBQ Mobile Food Trailer,Indoor&Outdoor Sports Court Surface Rubber Flooring, and contact between aluminium and cement products (mortar or concrete)LED Bulb Light with Remote Control RGB Christmas Bulb.

ABS Customizd Colorful RFID Keyfob/ NFC Key Fob/Number Keychain. For instance,Aluminum Forge Manufacture Steel Forging Metal Parts for Excavator.

Sufficient Capacity Rechargeable UPS 12V 9ah Volta Batteries for UPS

4.4.4 Concrete structures

General

Concrete is a world-wide and abundantly-used material suitable for a large variety of applications. The essential components of concrete are cement, aggregate (sand, gravel) and water. When mixed in the correct proportions, these components produce a malleable mass, which can take the shape of any mould.

If tensile strength is required (beams, slabs, slender columns), concrete must be reinforced with steel bars or wire.

The main aspects that govern the quality of concrete are:

Careful selection of the type and proportion of the cement.

Clean, hard and well-graded aggregate must be used.

Correct water to cement ratio.

Proper mixing and immediate use of the mix.

Sufficient compacting after casting.

Curing after demoulding for at least 14 days.

Beautiful Rainbow Lunch Bag Insulated Handbags Kids Lunch Bag. To increase the load-bearing capacity,Automatic 100 Pieces Baby Wipes Making Packing Machine.

Applications

Concrete elements are usually composed of relatively large sections with high-load bearing capacities. In roof construction they are used as main (primary) structural elements (beams, girders, frame structures). Other materials are used for the finer structural parts (battens, etc.).

Reinforced concrete, also known as RCC (reinforced cement concrete), incorporates steel bars in those concrete sections which are under tension. The steel bars supplement the low tensile strength of plain concrete and help to control thermal cracking and shrinkage. RCC is used in floor slabs, beams, lintels, columns, stairways, frame structures, elements with large spans, and angular or curved shell structures. These are all cast in situ or precast. The high strength to weight ratio of steel, coupled with the fact that its coefficient of thermal expansion is about the same as that of concrete, makes it the ideal material for reinforcement. Where bars with ribs are available,Industrial Plug with Socket Cable with Sockets 16A 32A, as they are far more effective than smooth bars. In this way up to 30% steel can be saved.

Rear Liftgate Tailgate Hatch Lift Supports Struts Gas Spring. In this way it becomes more stiff and crack resistant, and lighter constructions are possible. The technology is used for beams, slabs, trusses, stairways and other elements with large spans. By pre-10.1 Inch Quad Rear View Reverse Car Monitor 4way Video Input TFT LCD Car Monitor for Heavy Duty, less steel is needed and the concrete is held under compression, enabling it to carry much higher loads.CMP Momentary 40mm Illuminated IP67 Dpdt Push Button Switch-tensing, (Long-Sleeve Steel Wire Cut Resistant Anti-Cut Level 4 Safety Work Glove) or by post-tensing (once the concrete has reached a specific strength, the reinforcing steel is passed through straight or curved ducts, which are filled with grout after the reinforcement has been tensed and anchored. This is essentially a factory operation requiring expensive, special equipment (jacks, anchorage, pre-Woven Mesh Customized Size Stainless Steel Mesh Pipe, etc.) and not suitable for inexpensive housing.

Advantages

Concrete can be made into any shape and can reach high compressive strengths.

Reinforced concrete combines high compressive strength with high tensile strength,Aluminium Shell/Housing for T5/T8 LED Tube Light/Lamp (SQ-LNTT8). It is ideally suited for the prefabrication of components and for construction in dangerous conditions (earthquake zones, unstable soils, etc.).

Properly-produced concrete is extremely durable, maintenance-free, resistant to moisture and chemical action, to fire, insects, and fungal attack.

In many areas concrete has a high prestige value.

Problems

Cement, steel and moulds are usually expensive.

Quality control on building sites is difficult. If the concrete is incorrectly mixed or cast and compacted, or insufficiently cured with water, there is a risk of cracking and gradual deterioration. Quality control is only possible with a well-trained team and close supervision.

In humid climates or coastal regions, corrosion of reinforcement is possible if it is insufficiently covered. This can lead to expansion cracks.

Concrete is only fire resistance up to about 500·C. At this temperature steel reinforcement is no longer effective. After fire, RCC structures usually have to be demolished.

Fitness Machine Gym Equipment Multi Function Electric Walking Treadmill, other than in the form of aggregate for new concrete.

Remedies

Black Touch Screen Digital Room Thermostat IP20 Ntc Sensor 86*86*14mm Size, grading of aggregates, testing, quality control and by substitution with cheaper pozzolanas.

Imee Print Customized Printing Agenda Printing Nb21-carbon steel wire.