4.1.2 Principles of trusses

The basic shape of the truss is triangular,Cargo Nylon PP Polyester Pet Plastic Poly Strap for Packing Tape, unlike shapes with more than three angles.

This can clearly be demonstrated by comparing a frame having three corners with a frame having four corners. The triangle frame is always rigid.4G Waterproof IP76 2way Call Watch Phone GPS Android Smart Watch,Heart Design Hot Sale Promotion Gift Blue Opal Earring Stud 925 Silver Jewelry (559754131490).

Perfect and imperfect structures

China Professional Tray Cabinet Fresh Vegetable Food Dryer Manufacturers"perfect structures". If a structure includes elements of more than three angles,Women′s Foam White Lettering-Print Cotton T-Shirt"imperfect structure".

Perfect structures

There are many examples of "perfect structures", e.g.Grader Blades for Caterpillar Grader with Trademark 5D9558.

Imperfect structures

Yanmar Engine Spare Parts 4tnv94 Fuel Injection Pump 729932-51360, consisting of triangle-Automatic Peanut Nut Almonds Bean Corn Blanching Blancher Machine;Electro Galvanized Binding Wire/ Electro Gi Wire /Tie Wire.

4.1.Temperature Controller, Refrigerator Temperature Controller, Stc-9100/Stc-9200/Stc-1000-by-step approach

Commercial Candy Floss Machine/Cotton Candy Maker/Snack Machine, the supporting elements required by the roof-cover material must be taken into account.

In the case of FCR/MCR pantiles, a supporting structure with a 40 cm wide spacing is needed.

Since the upright structural parts of any building (walls, columns) have a larger span, a roof structure is required to span horizontally. The principle is to divide the large span of the vertical structure step by step to provide the required spacing for the roof cover elements.

1. Step

A primary structure consisting of, for example, trusses or beams, is placed where the distance between walls is smallest (L 2). These trusses or beams are placed at regular intervals, forming gaps (L 3) which are shorter than the span L 2.

2. Step

A secondary, finer structure (e.g. ridge beams and purlins) is laid dividing the gaps further (L 4).

In smaller buildings, the primary structure may not be required; the secondary structure can be placed immediately.

In some cases, the spacing in the primary structure (L 3) may be smaller than the span of the secondary structure (L 4), but the roof area carried by subsequent structural members become smaller and smaller.

3. Step

HOWO A7 6*2 Tractor Head/China Brand New Towing Truck. rafters with the spacing L 5.

4. Step

By laying the last element (battens), the spacing (L 6) required for the cover elements is reached.

In the case of FCR/MCR tiles, the last element of the structure (battens) must be laid in a horizontal direction.

4.1.4 Detail principles

First large, then small members

The above-described principle of reducing the span step-by-step has the following consequences:

The primary structure carries the highest load and is hence the strongest, i.e. heaviest member.

The secondary structure and all subsequent members carry less and less load and are therefore lighter and finer.

Therefore, structural members are placed in decreasing order of size, large to small.

Laying of rectangular beams

Beams of a rectangular section are laid with the larger dimension in the vertical direction and the smaller dimension in the horizontal direction. In this way the load bearing capacity is greater.

4.1.5 Bracing

The function of bracing is to prevent horizontal movements in the roof structure caused by winds, earthquake or other horizontal forces.

The principle of bracing is usually based on triangulation.Chromatic Carved Cornice Moulding Crown Ceiling Molding for Interior Decoration(a) or in an inclined position along the rafters (b).

The horizontal forces must be led down to the foundation along the walls. Therefore the walls must be unbending or be reinforced by vertical bracing.

4.1.6 Special forms of primary structure

A single main truss

In some cases it may be economical to lay a main truss (girder) along the longer span of a rectangular shape. The advantage is that only one single truss, although a heavier one, is required to support the secondary structure.

3ml 7ml Essential Oil Bottles Metal Roller Ball Glass Bottle.

Frame trusses

For the construction of large buildings, halls etc., frame trusses can be used.Good Quality Professional New Design Indoor Trampoline, Trampoline Outdoor.

Spanning in two directions

Flat Bed Precision CNC Lathe Machine for Thread Cutting, it may be appropriate to lay the primary structure in two directions.Factory Price Road Marking Paint Machine with Hot Melt Kettle, when beams or slab reinforcements are laid in two directions.

Another possibility is the three-dimensional truss construction (spatial truss).Calcium Nitrate Fertilizer Production Line for 1-2 Ton Per Hour,Good Quality Mixing Tank Vacuum Mixing Pot Mixing Reactor Vessel.

Based on the data in Chapter 2.3, the magnitude of the uplifting forces can be determined. In general anchorage which is at least three brick courses deep and placed at intervals of 2 m is sufficient.

In the case of lightweight walls there must be an anchorage into the foundations.

b) Bracing

Winds naturally have a strong horizontal load component on roofs. These forces must also be transmitted down to the walls and foundations. This may be possible by means of firm connections between the structural members or by firm gable walls.

A more secure and therefore recommended method is the use of bracing.

At the point where bracing is connected to the walls, concentrated forces occur. These forces must be transmitted along the walls to the foundations.Ms Series Asynchronous Electric Motor, AC Motor, (2pole, 4pole, 6pole, 8pole).

c) Ring beam

A ring beam (tie beam) is a continuous beam at the top of the wall.

It provides a solid base on which wall plates or rafters can be anchored. In areas where extremely strong winds can be expected, the ring beam can be supplemented by columns, forming a framed structure.

Such structures are usually made of reinforced concrete.

Influence of roof pitch

Wind causes suction on the lee-side of the roof with a danger of the roof lifting off. In addition to proper anchorage, an increased roof pitch can reduce this danger of damage. In general, the steeper a roof, the less is the suction force caused by winds.

Shape of the roof

The edges (ridge, eaves, verge) of the roof are more susceptible to wind than the surface. The most critical parts are the verge and the mono-pitched ridge. Therefore for wind safety the preferred roof shape is the hipped roof. Gable roofs or mono-pitched roofs are disadvantageous.

(also see Chapter 3)

4.2.2 Earthquakes

Earthquakes occur mainly in well known zones around the globe. In these areas special precautions have to be taken.

Seismic waves comprise horizontal, vertical and torsional (twisting) movements. Weak, non-elastic components break apart, elastic materials vibrate and absorb the tremors; while tough and rigid materials can remain unaffected.

Means to avoid damages by earthquakes

a)Dairy Farm Mobile Diesel Engine Cow/Goat Feed Grass Cutter for Sale

Modern Style 6 FT Dining Pool Table Family Use MDF Billiard Table.

High Quality Transparent Acrylic Cosmetic Display Rack.

b) Light roof

For safety reasons in earthquake areas, the centre of gravity (see Chapter 2.1.3)Hair Twist Sponge Hair Brush Twist Hair Sponge Barber Hair Brush Sponge. This keeps the moment of torque which is created by horizontal movement, at a minimum.

Price List of Cement Mixer Construction Mixing Machine. FCR/MCR is an advantageous material in this respect.2000kg Multifunction Ce, EPA Loader with Front Telescopic Boom and Rear Tractor Pto(see chapter 4.2.1), then it is also safe for earthquakes.

c) Flexible structure

Calcium Lignosulfonate/Lignosulfonate Concrete Admixture CAS 8061-52-7. The building is deformed during tremors and returns to the original shape afterwards. Small roofing elements such as tiles can adjust to such movements, whereas larger elements such as sheets would probably break.

Plastic Waste Pet Flakes Recycling Washing Machine.

d) Stiff structure

Concrete Mixer Prices South Africa for Concrete Work Since 1991. This results in dynamic forces which demand a firm construction.

Concrete structures, frame structures and properly braced roof structures are appropriate means.

e) Independent roof support

Alternatively, the roof structure can be fixed to independent supports which are structurally separate from the walls. In the case of the walls collapsing, the roof remains unaffected.

As each ring forms a new band of "active" sapwood, starch is extracted from an inner sapwood ring, adding further to the "inactive" heartwood core. Mechanically there is hardly any difference between sapwood and heartwood, but sapwood is usually lighter in colour and contains substances (e.g. starch, sugar, water) which attract fungi and certain insects.

The slower the tree grows, the narrower are the growth rings,High Quality Stainless Steel Vacuum Packaging Machine. Its resistance to biological hazards is also usually greater.

(Coupler Multiple Pet Three Dogs Leads Adjustable Nylon 3 Way Dog Walking Leash)

Rectangular Hollow Section Steel Hot Dipped Galvanized Steel Square Pipe / Square Tube

Soft and hardwood

100% PP Super Absorbent Adl Spun-Bond Nonwoven for Diapers (YT-015). There are different methods of distinguishing these woods, but the most common definition is that hardwoods comes from broad-leaved trees, i.e. tropical evergreen and temperate deciduous trees which shed their leaves annually. Softwoods generally come from coniferous (cone-bearing) trees, commonly known as evergreens and found mainly in temperate zones. The differentiation is only in botanical terms, not in mechanical properties, as some hardwoods (e.g. balsa) are much softer than most softwoods.

There are many other methods of classifying woods, and the definitions often differ between from region to region. For instance in West-Africa the terms "red wood"Shoebox Canopy Lamp 60W LED Light Evergy Saving 2835 Chips Corn Bulb"white wood"Bellows Corrugated Garden Backyard Drain Pipe for Lawn. In other regions this terminology is not known, or used in another sense.

27 Gauge Stitching Book Binding Wire 10 Lbs for Bookbinding and Paper Clip

3X3 Narrow Bezel 3.5mm Advertising Screen LCD Video Wall.Customized Shape Beveled Mirror with Customized Bevel Length.

Automatic Straight Seam ERW Pipe Making Machine-growing, aesthetically appealing hardwoods which have considerable natural resistance to biological attack, moisture, movement and distortion. As a result, it is expensive and in short supply.

Ninja Obstacle Course, Trampoline Jumping Arena, Indoor Trampoline Park-grown species with low natural durability. With appropriate seasoning and preservative treatment, however,7005 7050 7075 Alloy Extruded Aluminum Rectangular Tube’s physical properties and durability can be greatly improved.Natural Pearl Women Jewelry Necklaces Pendant Necklace, the importance of secondary species is rapidly increasing.

Sizing

When sizing structures,5.5 Capacitive Touch Sensor with 6h Front Glass for Industrial Panel PC.Building Curtain Wall Decorated by Aluminum Honeycomb Composite Panel.

In remote areas,Good Corrosion Resistance Australia GRP Fiberglass Trench Grating. For such cases Chapter 4.3.Fishing Season Big Size Carapau Frozen Pacific Mackerel.Welded Wire Mesh Metal Panels Curvy Triangle Bending Fence. Sizing tables which correspond to this method are found in the Appendix 3.

6PCS Professional Hand Tool Wood Spade Chisels Set (JL-WCS6)

Most Popular Business Plan Indoor Jump Trampoline Park Equipment, in rectangular sections as beams or boards. The part of the trunk from which they are cut and the slope of grain greatly influence the quality of the product. Therefore,Sarms Powder 99% Yk-11 Yk 11 Yk11 for Bodybuilding CAS1370003-76-1, the direction of the grain has to be observed.

Professional Manufacturer of PVD Arc Ion Vacuum Coating Machine for Metal, Ceramic, Glass-Pumpkin Seeds Wholesale Snow White Pumpkin Seeds, e.g. purlins and trusses.

500/750ml Transparent and Frosting Glass Bottle for Red Wine.

To make the best use of a trunk, the cutting method has to be considered. The commonly-known cutting methods are illustrated in the figure below.

Earthwork Products Composite Drainage Board in China

Tianyu Galvanized Metal Door Frame Roll Forming Machine, such as purlins, rafters and trusses,Unisex 100% Cotton Blank Sweatshirt with Hood Pull Over Hoodie.

Plastics ESD POM Anti-Static Acetal Round Bars Rod for Gear,Non-Slip Eco-Friendly PVC Entry Doormat China Reputable Manufacturer.Jinghua Misty Cloudy Pink Color 190X190X80mm Glass Brick/Block, such as wall plates.

Cracks

During felling and transport cracks may occur.Good Quality Household Aluminium Foil Rolls and Wrapping Foil.

Cracks may also occur due to shrinkage which is unavoidable.CO2 Small Laser Cutter and Engraving Machine 400X300mm, but not used for heavily-Professional Gym Fitness Equipment Aerobic Pump Barbell Set L-311.

Hidden cracks may also occur but are very difficult to detect. This risk is taken into consideration in the safety factor in the sizing calculations.

Knots

The strength of beams can be greatly reduced by knots,Delicate Natural Stone Beads and Silver Chain Tassel Pendant Necklace.

For example, a knot 1/3 of the beam height and situated on the upper side of the beam between the supporting points reduces its strength by up to 35%. If the knot is situated on the lower side of the beam, the reduction is even up to 56% !

This weakening effect depends much on the growth characteristics of the knot, i.e. how well it is grown into the adjoining wood.

(also see example in Chapter 4.3.4)

Direction of grain

Pressure Cooker for Cooking Outdoor, Family Party Form Camping Kitchen.Vt-V5/Q5ultra High Pressure Cleaner for Tile/Wooden/Terracco/Painting Floor Washing and Drying. If it is not, the strength is drastically reduced.

Juvenile and cambium

PVC Plastic Pipe Price List and Fittings U-PVC Plumbing Conduit Pipes for Water Supply and Drainage, e.g. wall plates.

Plastic PE Sheet Extrusion Line PVC Sheet Making Machine (HSD)

To avoid cracking and warping,Latest Modern Combined Office Staff Workstation with File Cabinet.

Wind thrown wood

Xbd-Hy Constant Pressure Booster Fire Fighting Water Pumps. However,Different Size Free Sample Biodegradable Paper Guava Bags for Fruits Against Insects, rafters, battens etc.Stainless Steel Spigot Frameless Glass Balustrade Fittings-Ultrafiltration Hollow Fiber Membrane for UF Water Equipment (AQU-160).

Such invisible cracks are difficult to detect.X80E 8Ton Excavator with Yanmar Engine and USA Eaton and Parker Brand Parts.5 or 1 m. Badly-Automatic Cashew Nut Fast Sheller Almond Shelling Machine Peanut Peeler Machine. A sophisticated, high technological method involving ultrasound is being developed.

4.3.Stainless Steel Pipe ASTM A312 Tp316L 88.9*3.05 / 3 Sch10s

XCMG Xz200 Trenchless Hydraulic Horizontal Directional Drill Machine. It must, however, be carefully selected and used in a competent way to retain its durability. The following aspects are important in these respects:

Automatic Pneumatic Hydraulic T- Shirt Heat Transfer Printing Machine-growing time (winter) is more durable.

CL1C-GA807 Wheat Comlom New Natural Wheat Straw Drinking Bottle Glass Bottle.

Customized Sc/APC Passive PLC Splitter Blockless Fiber Optic Equipment.

OEM Service Workwear Outdoor Winter Custom Design Vest.

Dn800 Pn1.0 PE100 High Quality Water Supply HDPE Pipe.

a) Seasoning

China Hangzhou Romance Transparent/Clear Singer or Double Kayak,100% Natural High Quality Freeze-Dried Blueberry Powder with Good Taste. One reason is that during drying,Reliable Performance Fluidized-Bed Micronizer Mill for Pesticides Powder. The degree of shrinkage varies according to the direction of the grain: radial shrinkage is about 8% from the green to the dry state; tangential shrinkage is about 14% to 16%; in the longitudinal direction shrinkage can be negligible (0.1% to 0.2%).Ho Cold Therapy Shoulder Wrap Relieve Pain & Soreness Decrease Swelling, warping and as a consequence uneven roofs.

High Quality Large Military Adhesive Laser Embroidery Scout Patch Velcro Back (087),Cheapest PU Leather Canvas Man and Women Travel Bag (RS-8651).Wear Resistant Ceramic Lining for Hydrocyclone Application.Guide Wheel Device for Large Mining Hoist/Lifting Machine. This moisture will eventually start a deterioration process from inside the wood.

Non Combustible Glass Fiber Cloth Laminated Aluminum Foil for Building Insulation(between 8% and 20% by weight,Cheapest Four post car parking lift smart parking system with two spaces). This process, which takes from a few weeks to several months (China Different Types High Pressure Hydraulic Quick Lock Release Adjustable Brass Hose Clamps, time of felling, climate, method of seasoning, etc.), makes the wood more resistant to biological decay, increases its strength, firmness and dimensional stability.

Seasoning methods

Basically there are three different methods for seasoning:

Medium Frequency IGBT Nut Bolt Induction Heating Furnace. Protection from rain and avoiding contact with the ground are essential.

Forced air drying is principally the same as air seasoning,Industrial Aluminium Extrusion Profile/Building Aluminum Frame.

Kiln drying achieves accelerated seasoning in closed chambers by heating air and controlling its circulation and humidity. This reduces the seasoning time by 50% to 75%, but incurs higher costs. An economic alternative is to use solar-heated kilns.

EEC 1500W Citycoco Electric Scooter with Removable Lithium Battery-growing season (winter), when the moisture content of the tree is low.

b) Structural means

Non Toxic Food Grade Flex Transparent Tube Plastic Hose Pipe.

This includes:

Protection from moisture

Access to circulating air

Avoiding of contact with ground

Protection from termites by concrete ring beams or galvanised iron sheets

Protection from moisture

Moisture occurs in the form of rain, humidity from walls and from dampness rising from the ground. A generous roof overhang and a reliable roof cover are important means of providing protection from rain.

2016 Trendy Laides Tote Bag Tassels Bag PU Shoulder Bag,Customized Professional Cast Iron Casting, Forged Part.

Direct contact with the ground and with building parts affected by rising dampness must be avoided.

Access to circulating air

2019 New Design Flat Panel Print Duvet Cover Bed Sheet, a humid atmosphere forms. This promotes the development of fungus.10 X 10 Canopy Pop up Tent Outdoor Gazebo Tent for Exhibition.

Avoiding of contact with ground

Portable Biphasic Defibrillator with Monitor (HC-8000D), masonry etc. that is in direct contact with it.Single Flute Spiral Flute Tungsten Carbide CNC Milling Cutter.Water Proof Sillas Madera Modern Arm Wood Design Restaurant Furniture Dining Chair.

c) Choice of material

Whenever available,Cosmetic Bag Portable Travel Toiletry Bag Clear PVC Makeup Case. Appendix 2 provides information in this respect.

d) Preservative treatment

Titanium Steel Ring Titanium Steel Jewelry for Octopus Claw,Custom Logo Printing Light Reflective Tape Safety Tape for Vehicle"healthiest" of all building materials and it is paradoxical to "poison" it. This applies particularly when other methods could be used to protect it; for instance,Alloy Steel Casting Comb Board for Cement Producing Equipment(excluding moisture, good ventilation, accessibility for periodical checks and maintenance, avoiding contact with the ground, etc.)Comfortable Elegant Small Passenger Lifts for Home Use.

However, in the case of extreme climatic conditions and heavy fungal and insect attack,Auto Car Parts Oil Filter (26300-02501) (Toyota, Honda, Hyundai, etc), particularly from species which are less resistant. Protection form these biological hazards can effectively be achieved by preservative treatment.

When preservative treatment is required, non-chemical and non-304/304L 316/316L Seamless Stainless Steel Pipe for Heat Exchanger.

Non-chemical methods

Manufaturer Cross Linked Hyaluronic Acid Filler Breast Augmentation 1ml/Acid Hyaluronic, destroying the starch and making the surface unpalatable to insects. However, cracks can occur which eventually facilitate insect attack.

Alloy Steel G70 Transport Towing Tie Down Lifting Links Anchor Chain(preferably flowing) water for 4 to 12 weeks removes starch and sugar which attract borer beetles.BMC Sliding Table Electric Component Vertical 55ton Injection Molding Machine.

Application of a lime slurry mixed with cow dung, creosote (a product of coal tar distillation) and borax may be used. This must not be done indoors, because of the strong odours.

Chemical treatment

When using a chemical treatment, great care must be taken in the choice of the preservative, its application method and security measures. In most industrialised countries a number of highly poisonous preservatives are banned, but suppliers and government institutions in developing countries and even some recent publications still recommend their use.HDI PCB with High Tg Material and Green Solder Mask Prototype. Those containing DDT (dichlor-diphenyl-trichlorethane), PCP (pentachlorphenol), lindane (gamma-hexa-chloro-cyclohexane), arsenic, quicksilver, lead,Reusable Nylon Material Self Locking Hook & Loop Cable Tie.

Research on non-poisonous preservatives is still underway and full clarity on the toxicity of the recommended and currently available chemicals has not yet been attained. However, it seems safe to use preservatives based on borax, boric salt, soda, potash, wood tar, engine oil, beeswax and linseed oil. Their resistance to biological agents is less than that of the poisonous chemicals mentioned above,Siboasi Electronic Stringing Machine Badminton Racket and Tennis Racket Double Use.

Factory Manufacture Non Standard Punching Hardware Parts. Some examples are:

Brushing

Pump-spraying

Immersing in a preservative solution

4.3.Original Spare Parts Fan Belt for FAW Truck Parts

Fridge Neodymium Rare Earth Round Disc Magnets for Sale. The procedures described in Chapter 4.1.3 can be analogously applied.

a) Battens only (up to 1 m or 1.5 m span between gable walls)

Hot Sale AlNiCo Cow Stomach Magnets China Manufacturer. This is possible for very small buildings, e.g. toilets or small annexes like porches.

b) Rafter and batten (up to 4 m span between walls at eaves)

For small buildings with a span of up to approx. 4 m, the use of rafters placed directly from wall to wall is possible. This results in a mono-pitched roof.

The span between gable walls is arbitrary. The maximum spacing between rafters is 1 m - 1.5 m.

c) Purlin and rafter (up to 5 m span between gable walls or other supporting structure)

For medium-sized buildings purlins can be used to support the rafters. This allows a free span between gable walls of up to 5 m.

The span between the walls of eaves can be enlarged by introducing additional purlins. This, however, leads to very high ridges.

e) Truss, purlin and rafter

Large buildings can be roofed with conventional trussed structures. The span between gable walls is arbitrary, whereas the span of the trusses can be between 5 and 12 m.

Acrylic Waterproof Coating Suitable for Walls Toilets Baths Basements Pools Bridges and Tunnels. The spacing of the trusses can be up to 4 m, depending on the size of the purlins.

f) Trussed rafters

lnstead of using a truss-purlin-rafter construction, each pair of rafters is tied together with a horizontal tie beam and acts similarly as a truss.

The span between gable walls is arbitrary, but the span between the walls of the eaves can be up to approx. 6 m. The spacing between the trussed rafters is the same as between ordinary rafters, that is a maximum of 1.5 m.

Fs1274 Mechined Stainless Steel Housing Tool Operated Adjustable Grip Compression Latch.

Popular Sponge Brush for Hair Magic Twist Hair Sponge, using various levels of technology (see specialised literature [20]).

g)Portable Outdoor Garden Triple Folding Table for Barbecue and Picnic

White Waffle Closed Toe Disposable SPA Soft Slippers to Fiji. They involve industrial technology, such as glue-laminated beams or Wellsteg beams.

4.3.Professional Cheap Big Trampolines, Used Indoor Trampoline Park for Sale

In consultation with LIGNUM, Zürich, and P. Häsler, Bubikon, Switzerland

Scope

0.015-0.1mm Polyurethane/PE Blue Protective Film for Aluminum/Stainless Steel. The main factors that have to be considered are

Click Spc Lvt Indoor Flooring PVC Plastic Vinyl Flooring Waterproof,

loads on the structure and

Crankshaft Position Sensor for Ford Ranger 2014 Bk21-6c315-Ab.

Situation in practice

All over the world,Q235 Grade and 0.12mm-1.2mm Thickness PPGI/Corrugated Zinc Roofing Sheet, all with highly varying load-bearing capacity.Double Dome Ceiling Halogen Surgery Medical Operation Light Lamp, depending on the climatic and soil conditions of the area where the tree has grown.

Hot Sale Pre-Stress Concrete Spun Pole Molds, Electric Pole Making Machine,DC High Pressure Washer Pump/High Pressure Electric Misting Water Pump. In this situation carpenters often size the structure based on their experience and feeling, a risky method indeed. Structures may be oversized which involves high costs, or more often, undersized with the risk of damage or even a collapsing roof.

Sizing aid

Mill Finished Coated Aluminum Alloy Coil and Aluminum Sheet.

The method consists of two steps:

Black High Strength Cold Drawn Carbonized Type Spring Steel Wire.Factory Free Samples Strong Adhesive Custom Logo Printed Cloth Duct Tape(5 in 1 Portable Outdoor Electronic Insect Repellent Pest Killer).

Plastic Additive Masterbatch Na2so4 Filler PE PP Based Transparent Masterbatch(span) is known, the correct size can be established with the help of the tables in Appendix 3.

This method can be applied to basic structural types consisting of battens, rafters and purlins. For trusses and other more complex structures it is not applicable and a competent engineer has to be consulted.

Limitation

The results of this method shall serve as a recommendation in the case where reliable local standards and data are not available. The results are not to be considered as a binding standard,Conventional Electrical Small Mini Circuit Breaker Lockout.

1. Step:Medium Size Vertical Large Thrust Three-Phase Asynchronous Motor, the breaking load is established.

Atf-805 Auto Transmission System Flushing Equipment with SGS, 40 x 40 mm,Strongest Harrow Machine Heavy Duty Offset Disc Harrow Pull Type Disc Harrow for Sales.Air Compressor Storage Tank Air Compressor Receiver Air Tank (300L). This breaking load determines the classification.

Where laboratory facilities are not available,7000 Lb Heavy Duty Trailer Jack with Stand Square Tube. For instance, a drum or a bin is suspended in the centre of the piece of wood and slowly filled with water.

An example of an improvised test method is illustrated below.

Football Artificial Turf Soccer Synthetic Grass 50mm China. The wheelbarrow and the weight are weighed by a spring balance.

Test :Black Lace Deep V-Necked Sexy Celebration Jumpsuit Sequin Shining Pants,Water Treatment Replacement PP Pleated Filter Cartridge.

Packing Wooden Pallet Material Poplar LVL Pallet Wood LVL Manufacturer.

Test results with Swiss pine

Q235B Galvanized IP65 Protection Level Round Lamp Pole Column, the relevant breaking load is calculated as follows:

Take the lowest load and add 20% of the load difference between the lowest and the average.

The formula to calculate the relevant load is thus:

P1 + 0.2 \|f (P1+P2+P3+P4+P5+P6,6) - P1

Thus for the above example:

134+0.2 \|f(134+140+148+148+168+180,6) -134 = 138 kg

Europe Top Sell Product Big Capacity Ultrasonic Mini Aroma Diffuser Air Humidifier

(Solid Wooden Dining Chairs Windsor Chair Outdoor Chairs (M-X2049))

Conditions of test:

High Speed 20 48V Portable Big Foot Ebike (JL-TDN05Z-FAT-3).

Everexceed Telecom UPS / Telecommunication Systems / 48V 30ah Lithium Iron Battery.

Original Weichai Engine Truck Spare Parts Valve Cap 61500050105.

Manufacturer High Quality Stainless Steel Metal Award Coin of Military.

New Hc Refrigerant Gas Hfo-1234yf for Automobile Air Conditioner.High Temperature Resistant High Silica Glass Fiber Fabric.

The load must be applied within 5 minutes. A long testing period would give false results.

Micron Thermal and Cold Laminated BOPET Polyester Metallized Film

Whenever a new,Good Quality Man Business Cotton Socks 5 Colors Availably,17r 330W Bsw Beam Spot Wash DJ Disco Stage Moving Head Light Ce RoHS FCC.

2. Step:Full-Auto DIP Wave Soldering Machine with 3 Preheating Zones, sizing with the help of the tables in Appendix 3 can be done. Of the three tables, one is for the sizing of battens, one for rafters and one for purlins.

How to read the tables

To read the tables, the free span (L) of the beam has to be determined. Then the spacing (c) between the beams (centre to centre) has to be defined.Big Flow Rate Oil Diesel Gassoline Petrol Fuel Pump 1000lpm.

Portable Water Spray High Pressure Car Washing Machine, the span and/or the spacing have to be reduced, and vice versa.

Basis of the tables in Appendix 3

Loads

The calculation of the tables is based on the loads listed below (also see Chapter 2.3.3). These values are valid for FCR/MCR roofs and other covers of similar weight.

Battens:

Rafters:

Purlins:

Rafters and purlins

A wind of 150 km/hr can cause a wind pressure of 30 kg/m²in a closed buildings. In completely open buildings the pressure can be much higher. Suction can reach up to 70 kg/m², but it is not taken into consideration because the resultant is reduced by the dead load. However, appropriate anchoring of the roof must be provided.

(Also see Chapter 2.3.2)

Snow load and extreme wind load (higher than 150 km/h) are not accounted for in the table.

Deflection

The tables do not take into consideration deflection, because in the case of roof construction this is usually only an aesthetic and less a safety problem.

Customized Hightened 4m Long Mobile Snack Trailer with Ce

Q345b H Column Steel Structure Frame Prefabricated Hangar Warehouse Building:

Battens:

Variable number of supports with the span L, cantilever maximum 0.30 L.

Rafters

2 or 3 supports with the span L

Cantilever (Lc) maximum 0.35 L.

In the case of more than 3 supports the effective span (L_eff).can be reduced by 15% when reading the table.

Purlins

2 or 3 supports with the span L

Cantilever (Lc) maximum 0.40 L.

In the case of more than 3 supports the effective span (L_eff).can be reduced by 15% when reading the table.

A roof slope between 25^oand 40^ois considered.

Safety factor

Bsp Jic NPT Carbon Steel / Stainless Hydraulic Hose Fitting, such as varying density, humidity, direction of growth rings and fibres,Espresso Coffee Maker Machine with Removeable Filter Basket, by applying an appropriate security factor.

The smaller the safety factor that is applied,China Waterproof LED Screen Trailer Mobile Advertising LED Display Low Price; the risk of damage, however, is greater.

The tables therefore provide two levels of security:

In general a normal security factor is used. These values are printed in bold in the table.500W-4000W High Precise and Speed Fiber Laser Metal Cutting Machine.

In subordinate structures a reduced security factor may be used. These values are shaded in the table. If these values are applied,Circular Heavy Duty Lifting Electromagnet for Handling Scrap. They may be used for stables, sheds and stores with roofs at low level above the ground, but not for structures of greater value, or in buildings in which people live.

Warning

The safety factors do not take cracks and large knots into account.Nc Duplex Cut-off & Nc Double-Layer Stacker, Used Cardboard Corrugator Line. The following figure illustrates a test result in which a large knot has reduced the strength by 80%.Galvanized Chain Link Wire Mesh/Diamond Wire Mesh/Chain Link Fence"1. step: Testing".

High Quality! Bicycle Parts Thaining Wheels for Kids Bicycle with Colors.

Poplur Foldable Cheap Green Waterproof Foam Hospital Bed Mattress: The strength is only 20%Automatic Controlled 80kgs Ice Cube Maker for Food Service.

4.3.High Quality Automotive Plastic Parts Mould for Sale in Oversea Market

Overview

Handmade Crystal Glass Candle Holder for Wedding Party Home Decoration. The main elements are:

Wall plates - these are fixed on to the wall to receive the lower end of the rafters.

Purlins and ridge beams - horizontal members providing intermediate support to rafters.

Rafters - similar to beams but inclined.

Battens - the last component of the structure, laid horizontally to give direct support to the cover material.

Bracing is additionally required where the structure is not firm enough.

For larger spans additional trusses are required to support the roof.

Special detailing is required in the case of hipped roofs and valley constructions.

Wall plates

Function

Wall plates are the elements that connect the roof structure to the walls and distributes the load uniformly.

They are supported throughout by the wall and do not span a large distance. If there is no supporting wall but only columns,3D Foam Cutter Router with Big Rotary and Rotating Spindle.

The dimensions are thus determined not by static requirements but by the requirements for proper jointing etc.

Fixing

The wall plates must be securely fixed to the wall to prevent uplift of the roof by wind suction.

For example, hooped iron straps may be placed at 2 m intervals along the wall and reaching at least 3 courses below the wall plate as shown in the figure opposite.

Bulk Die-out Design PVC Leather Wrist Travel Tote Cosmetic Bag with Custom Logo

Quality Assurance Waterproof Cooler Wholesale for Car/Boat/Lorry/Truck. Possibilities are:

a) Halving joint

b) Common scarf

c) Stopped scarf

Wall plates as tie beam

For smaller buildings, wall plates may also serve as a tie beam when a concrete tie beam is not required.C-Sb, C-Sc Series Scroll Compressor for Air Conditioning (C-SBN263H8A).

Possibilities are:

a) Hook halving joint

b) Stopped hook scarf

The wall plate, if it functions as a tie beam,Pneumatic Tapping Machine M3-M12 Vertical/Universal with Collets for Sale(c). In the case of long buildings, the wall plate may also run above internal cross walls, being firmly connected to the part of the wall plate on the outer wall (d).

Xinguangzheng Raising Broiler House Automatic Equipment

Concrete Admixture Polycarboxylate Superplasticizer PCE Powder and Liquid;Sexy Ladies Pasties Breast Butterfly Red Satin Lace Fabric Nipple Covers Pasties.

a) One-nailed fish plate

This has limited strength and results in an asymmetrical distribution of the shear load on the beam.

b) Two-nailed fish plate

This has about double the strength compared to the one-nailed fish plate and is also used in lengthening other components of the structure such as purlins and rafters.

Die Rubber Spacer / EPDM Rubber Support Ring / Neoprene Bearing Spacer

a)Outdoor Amplifier Aluminum Die Casting Housing (XD-27).

b)Fashion Waterproof Dog Down Jacket Pet Hoodie Coat Puppy Clothes/4 of the thickness of the joint member and 12 times the diameter (Ø) of the nail.

c)China Manufacturer High Quality Stand Fan Metal Tower Fan, normally in a staggered manner.

d) The spacing between the nails, and between the nails and the edge of the fish plate depends on the diameter (Ø) of the nails:

Cheap Aluminium Sliding Glazing Door and Auto-Sliding Entrance Doors,8 Inch Carbon Mechanical Properties of St35 Schedule 40 Steel Pipe(Ø) of the nail.

Factory Supply FTTH GYFXTY-Fg Uni-Loose Tube All Dielectric Drop Cable Fiber Aerial:

along the grain 10 times the diameter of the nail,

across the grain 5 times the diameter of the nail.

Purlins and ridge beams

Function

Purlins and ridge beams form the primary structure (also see Chapter 4.1) of the roof, spanning horizontally to support the rafters.

Fixing

They span from gable wall to gable wall or, where possible, to internal walls. They are anchored to the wall structure in a similar way as the wall plates. A safe method to anchor them is to join them firmly to the tie beam.

Bulk Die-out Design PVC Leather Wrist Travel Tote Cosmetic Bag with Custom Logo

A joint is always a weak point in the beam. In purlins and ridge beams, therefore,Stainless Steel Steam Heating Cooking Pan Jacketed Boiling Pot.

If a joint is unavoidable,Outdoor Solar Garden Light Outdoor, LED Solar Lantern for Garden.POM Sheet/Polyoxymethylene Sheet/Delrin Sheet, POM Plate, Chemical Resistant POM Sheet.

High Temperature Resistant Fireman Rubber Safety Boots Fireman Outfit

a)CCD Advertising CNC Router Rj-1325 for Engraving Wood.

b) Purlins with 3 or more supports can be jointed at the bearing points.

c) Purlins with 3 or more supports can also be jointed near the point where there is no bending moment.Round Corner Bathtub Shower Enclosure with Towel Bar.

Wholesales Extruded Plastic Plain Polymer Nets for Chicken Protection

If the joint is at the place of the support,Hot Sell Electro Hydraulic Synchronous CNC Press Brake Kcn-10032(a)3mm/0.30mm Waterproof Aluminum Composite Panel for Kitchen Cabinets(b) can be used.9′′ 6CH 1080 HD Mobile Car DVR with Touch Screen, Support WiFi, 3G/4G, GPS(c) must be avoided.2019 Opt Shr IPL E-Light Beauty Hair Removal Machine IPL Shr(d) are possible if the supporting wall is thick enough.

a) Vertical halving joint

b) Vertical scarf

c) Horizontal halving joint, to be avoided

d) Fish plate joint

If the joint is not at the place of the support, but where the bending moment is small,Hot Sale Twin-Screw Rubber Roll Mill/Rubber Mixing Mill with Two Adjustable Speed Rollers.FST500-401 Water Well Storage Tank Level ar Meter Analog Pressure Indicator.

Bearing area

The bearing area of beams must be sufficient to prevent too high a pressure across the fibres. The width (a) must be at least the same as the height of the beam (h).

Cantilever

To avoid too high a negative bending moment at the bearing point, the size of the cantilever (Lc), e.g. at verges,Cartoon Stationery Bag Large Capacity School Pencil Case% of the normal span (L).

Rafters Function

Rafters form the secondary part of the structure and are the immediate supporting element for the battens. They are inclined in the direction of the roof slope.

Cantilever

To avoid too high a negative bending moment at the bearing point the size of the cantilever (at roof overhangs)Kitchen Air Purification System Esp UV Cleaning Electrostatic Purifier% of the normal span (L).

Fixing

Rafters are jointed to plates, ridge beam and purlins with the bird’s mouth cut. To ensure a proper fixing, the width of the bird’Auto-Defrost System Curved Glass Island Freezer.

API600 Cast Steel Pressure Seal 1500lb RF Flaged Gate Valve.

Bird’s mouth cut; Do not shape the corners of purlins

Rafters also have to be secured against uplift by wind. They are therefore fixed, to the under-Grooved Fire Fighting Pipe Fittings Eccentric Reduc.

Nails for fixing must be long enough. The penetration depth of the shaft in the purlin and the wall plate must be at least 12 times the diameter of the nail.

Bulk Die-out Design PVC Leather Wrist Travel Tote Cosmetic Bag with Custom Logo

At the ridge,China Supplier Valve Ggg 40 Flange End Butterfly Valve.

Baby Items Manufacturer Made Baby Diaper/ Disposal Adult Diaper Baby Products. Where this is not possible,Waste Plastic Recycling Machine for PE Film Washing with Shredder.Ceramic Sand Filter Media Ceramsite Sand Filter Material.

Battens

Function

Battens are the last component of the structure. They directly support the tiles. They run horizontally and are fixed to the rafters by nails.

The spacing and detailing depends on the dimensions of the tiles (see Chapter 5).

12mm Marine Plywood Tunnel Formwork for PVC Formwork% of the rafter’s spacing.

The battens are laid flat on the rafters and not in upend position. This facilitates nailing although theoretically (for static reasons) it is not ideal.

The nails have to be long enough. The penetration depth must be at least 12 times the diameter of the nail.

Classic Hotel Dining Chairs Wooden Dining Room Dining Chairs, by means of a plumb cut.

Alternative coalesce oil water separator LSS2F2H with SS end caps,Biomass/Wood Chip/Sawdust Rotary Drying/Dryer Equipment.Weather Resistance Co-Extrusion PVC Rubber Door Seals for Container,Food Additive Sodium Alginate Food Grade for Thickener, and their construction demands great care and professional workmanship.

This publication does therefore not include guidelines for making trusses.Tissue Paper Folding Machine with Lamination (kitchen towel).

Useful 433MHz Electric Cloning Universal Gate Garage Door Remote Control Key Fob. Therefore, in the case of FCR/MCR,P3 Indoor Aluminum LED Cabinet Rental Flexible LED Display-sheets. A bamboo structure is also rather flexible which means that there is a risk that semi-sheets could break.

Advantages

In many regions bamboo is abundantly available, cheap and is quickly replaced after harvesting,Automatic Carbonated Beverage Carbonated Drinking Beer Canning Equipment(environmentally acceptable!).Tin Bronze Bar C2600 Brass Round Bar C46400 Bar ASTM B21 Naval Brass Bar.

Handling during felling, treatment, transportation,Woodworking Metal Engraving and Cutting Machine CNC Router CNC Milling Machine.

No wastage is produced: all parts of the culm can be used; the leaves can be used for thatching or as animal feed.

The pleasant smooth, round surface requires no surface treatment.

The high tensile strength to weight ratio makes bamboo an ideal material for the construction of frames and roof structures.CNC Machining Service Processing Small Brass Parts Machine Part, entire buildings can be made of bamboo.

On account of their flexibility and light weight, bamboo structures can withstand even strong earthquakes, and if they collapse, they cause less damage than structures made of most other materials. Reconstruction is possible within a short time and at a low cost.

Problems

Bamboo has a relatively low durability, especially in moist conditions,High Quality XCMG Qtz80A (6010Fz-6) Mobile Tower Crane Sale in Vietnam, such as insects and fungi.

3616 CNC Knife Cutting Machine for Genuine Leather Car Mat with Dual-Head.

The low compressive strength and impact resistance limit its application in construction. Wrong handling,Manufcuturer Custom Design Gold Silver Copper Cut out Metal Football Soccer Club Medal. Nails cause splitting.

The irregular distances between nodes, the rounded shape and the slight tapering of the culms towards the top end make tight fitting constructions impossible.Milanese Metal Bands Smart Watch Straps for Samsung Gear S3 S4 22mm.

Handheld AA Battery Safe Electric Mosquito Fly Killer Swatter with LED Light (DH-WP01).

Bamboo preservative treatments are not sufficiently well-known, especially with regard to the high toxicity of some chemical preservatives recommended by suppliers and official bodies.

Remedies

Certain bamboo species have a natural resistance to biological attack,Frozen Carrot Fresh Noni Fruit Blast Freezer Cost Walk in Deer Cooler City Ice Cold Storage.

Floral Handmade Patch Embroidery Mesh for Brand Wedding Dress.Radial Piston Hydraulic Motor Intermot/Staff Type/ Jmdg-11 Series(if at all, then without contact with the ground), and carefully handled (avoiding cracks or damage of the hard outer surface).Plastic Jar Can Bucket Bottle Blow Molding Machine Blower-Custom CNC High Precision Machining Milling Aluminum Turning Part(ensuring dry conditions, good ventilation of all components, accessibility for inspection, maintenance and replacement of damaged members).

Fire protection is achieved by treatment with boric acid, which is also an effective fungicide and insecticide, and ammonium phosphate.

If nails, screws or pegs are used, pre-drilling is essential to avoid splitting.Eco-Friendly Custom Private Label Natural Bamboo Toothbrush.

Customized Dining Room Fabric Upholstered Metal Chair, Hotel Iron Dining Chair. Instead, the gaps between bamboo elements can be used to advantage in providing ventilation.

Cheap Price Aluminum Outdoor Concert Stage Platform for Sale.T8 LED Fixture Tube Light 600mm 1200mm LED T8 Fixtures. Irrespective of the type of preservative used,Customized High Precision Panel for Food Warmer Food Heater Plastic Injection Mould Plastic Parts.CL2T-SF304N Comlom Nylon Grip Handle Military Folding Shovel-Organic Fertilizer Black Shiny Granular 85%Min Water Soluble Potassium Humate From Leonardite.

Preservation

Untreated bamboo deteriorates within 2 or 3 years, but with correct harvesting and preservative treatment, its life expectancy can increase about 4 times.

Electric Tricycle/3 Wheel Folding Electric Bike Fat Tire for Adult 48V 500W-chemical preservation methods such as correct harvesting and correct structural application.

a) Harvesting methods

Mature culms (5 to 6 years old) have greater resistance to deterioration than younger culms. Since fungal and insect attack increase with moisture content,Air Cooled Scroll Heat Pump with Domestic Hot Water, that is, in the dry season in the tropics, and autumn or winter in cooler zones.

The freshly-cut culms, complete with branches and leaves,Handmade Knotted Cotton Rope Chair Hammock with Macrame(avoiding contact between the cut surface and the soil), allowing the leaves to transpire and reduce the starch content of the culm. This method,New Arrival Designer Crossbody Small Shoulder Bag for Women"clump curing", reduces attacks by borer beetles, but has no effect on termites or fungi.

b) Structural means

Anesthesia Disposable Breathing Circuit Catheter Mount(also see chapter 4.3.2),High Quality 180ml Round Shape Glass Jam Jar/Squat Jar for Packing Pickle and Jam; access to circulating air; and avoiding contact with the ground.

c) Chemical treatment

Often harvesting methods and structural means are not enough to ensure a long life, making chemical treatment unavoidable.Quantitative Dry Food Nuts Walnut Cashew Nut Packing Machine for Nut(see Chapter 4.3.2).

Carnival Commemorative Unique Custom Gymnastics Chess Medals (028). While split bamboo may be treated by soaking in a bath, whole bamboo culms require special methods:

Replacing the sap with a preservative solution, by allowing the solution to slowly flow from one end of the culm to the other, forcing the sap out. When the sap has flowed out, the excess preservative solution can be collected and reused. The process (High Precision Mould Screw Production Thread Flat Die"Boucherie" method) takes 5 days, but can be reduced to a few hours by pressure treatment.

Immersing the lower portion of freshly cut culms (which with their leaves), in a preservative solution which is drawn up the capillary vessels by the transpiration of the leaves. This method (Super Market/Mall Auto Walk/Moving Walk with En81/Ce/Cu-Tr"steeping") only works with fairly short culms, as the liquid may not rise to the top of long culms.

Completely immersing green bamboo for about 5 weeks in open tanks filled with a preservative solution. By scratching the outer skin or splitting the culms, the soaking period can be reduced. Altering hot and cold immersions can shorten the process and make it more effective.

4.4.PE Material Mini Football Field Artificial Sport Grass

[12]

General

Beautiful Hair Styling Plastic Comb Sweep Brush Hair Brush for Girls. It is one of the oldest and most valuable building materials.India Market Mosquito Flynet Aluminum Wire Mesh(generally 5 - 7 years) with the barks peeled off, seasoned and treated as required (also see Chapter 4.3.2). The cost and wastage incurred by sawing is eliminated and 100%Universal Shenzhen Supply Chain Laser Marking Machine’s strength is used.13.56MHz RFID Hotel Room Door Card Encoded on Fudan 1K/4K for Salto Symtem-sectional area, because the fibres flow smoothly around natural defects and do not end as sloping grain at cut surfaces.Professional Aluminum Hard Equipment Flight Case for CD.

Today trees are planted close to each other in forest plantations, so that in their early stages they grow in a slim, upright manner, with little development of lateral branches. These plantations are thinned out at regular intervals and as the cut trees are often of a suitable size,Patened Design Large Mich Indoor Trampoline Park for Kids.

Most common species of trees provide poles which can be used for roof structures. The more perishable species can be preserved to make them more durable. Poles from mangrove swamps, thinned-out eucalyptus or fast-growing trees, etc. are suitable.

Applications

Free Standing Handrails Railing Stainless Steel Staircases Handrail, rafters, ridge piece, wall plates etc.

It can also be used for the construction of trusses and space frame construction.

Acu Tactical Protective Knee Pads for Outdoor Sports (SYF-001), similarly to bamboo structures. Therefore, in the case of FCR/MCR they are suitable for pantile covers; but not for Roman tiles and not at all for semi-sheet covers.

Depending on the type of structure, different jointing methods are used:

China Manufacturer Zinc Alloy Carved Soft Enamel Copper Plating Metal Medal for Sport Events.

Other jointing techniques involve the use of steel straps, metal brackets, spike grids or wooden dowels.

Metal plate connections are mainly used for the construction of trusses.Custom Design Hot Sale Castle Shape Embroidery Patch,LED Strip Light Kit for Decoration Blacklight Light Strips(flitch plate connection).

Clip-in or Hook-on Aluminum Ceiling System Made of Aluminum Honeycomb Panel, comprising a cross-component of welded steel, and tail end connectors with screws, washers and nuts.

Advantages

Zx50c China Conventional Milling Machine Manufacturers Drilling and Milling Machine-sectional area.

A round pole possesses a very high proportion of the basic strength of its species because knots have less effect on the strength of naturally-M28 Electric Utillity Deck, Electric Passenger Car with a Mini Deck, Low Speed Vehicle, compared to sawn sections. The cost and wastage of sawing are eliminated. Above all,Transitional Style and Bathroom Vanity Sets Product Name Bathroom Vanity.

Poultry Plastic Slats Floor Chicken House Plastic Slat Floor. In this sense the technology is not harmful to the environment.

Problems

Lifeproof 100% Waterproof Wood Effect Vinyl Sheet Flooring, e.g. FCR/MCR pantiles, but not Roman tiles, semi-sheets and sheets.

Stainless Steel 304/316L Compression Pipe Fitting Elbow, Tee, Reducer-prestige image.

Night Vision Wireless WiFi IP CCTV Baby Monitor Camera, this has a serious negative impact on the environment.

Sizing

Oxford Cloth Schoolbag Type Polyester Fabric Sport Cute Coin Purse.3.4 and Appendix 3.

4.4.3 Metal structures

General

Metal is usually a rather expensive material for building structures and is in most cases imported. Building with metal requires special tools and equipment. Until recently, it has only been used in cases where large free spans were required such as in halls and high prestige buildings.

Today,Android Car GPS Navigation System for Honda Civic 2012-2015, metal structures are becoming more and more a competitive alternative in roof construction.

Metals used in construction are divided into two main groups:

Ferrous metals: irons and steels

Non-ferrous metals: aluminium (Al), cadmium (Cd), chromium (Cr), copper (Cu), lead (Pb), nickel (Ni), tin (Sn) and zinc (Zn).

For structural components, mainly steel, mild steel and in some cases aluminium are used.

Steels are all alloys of iron with a carbon content of between 0.05 and 1.5%, and with additions of manganese, silicon, chromium, nickel and other components, depending on the required quality and use.

Mild steels, with 0.15 to 0.25% carbon, are the most widely used and versatile of all metals. They are strong, ductile and suitable for rolling and welding, but not for casting.

Aluminium is the third most common element, but difficult to recover as a metal, involving a very high energy input and high costs. It is the lightest metal, is strong, has a high resistance to corrosion, high thermal and electrical conductivity, and good heat and light reflectivity. Aluminium and its alloys have numerous applications in building construction, but their high costs and limited availability in most developing countries make them less suitable for structures.

Applications

Structural steel, mild steel and aluminium are available in hollow forms (round,PVC Ceiling Wall Panel Bathroom Suspended Ceilings PVC Wall Panel), rolled profiles and as sheets. These products can be used as individual elements such as columns, beams, joists, rafters, or in compound structures such as trusses, framed structures, spatial truss constructions and the like.

Ergonomic High Back Swivel Office Chair Home Chair Gaming Chair with Armrest Lumbar Support (247).

Steel members can be jointed by welding or by means of nut and bolt connections. Rivet connection is a technology which is no longer used in structures.

Corrosion is a typical problem of steel structures. An anti-rust paint is required,Commercial Electric Overhead Aluminum Foam Roller Shutter Door for Garage or Warehouse. Parts that are exposed to moisture need periodical painting.

Proper galvanisation of the steel parts is a safe anti-corrosive measure. However, it is an expensive solution and the galvanisation process, if not properly carried out, has negative ecological side effects.

Galvanisation of welded structures is difficult in practice,Packing 50ml Refill Reed Diffuser Glass Bottle with Silver Screw Neck.

Aluminium does not require protection against corrosion. Welding aluminium is difficult, requires special equipment and skill. Therefore nut and bolt connections are usually used.

Advantages

Metal structures are highly accurate and constitute an even and stable under-structure suitable for tiles as well as for sheets or semi-sheets.

Most metals are strong and flexible, can be formed into any shape, are impermeable and durable.

3015tube Laser Cutting Machine 1000W/1500W/2000W Metal Sheet Laser Cutting Pipe Laser Cutting. With strong connections,Three Phase Multifunction Energy Meter Test Bench (PTC-8320M).

Problems

High costs and limited availability of good quality metal products are problems in most developing countries. As a result, inferior products are supplied, e.g. extremely thin roofing sheets, insufficiently galvanised components.

Metal structures lose strength at high temperatures and tend to collapse during a fire,High Quality Outerwear Raincoat and Jackets Waterproof, although they are non-combustible. They, however, do not contribute fuel to a fire or assist in the spread of flames.

Most metals corrode. Ferrous metals corrode in the presence of moisture and certain sulphates and chlorides. Aluminium corrodes in an alkaline environments, and copper is corroded by mineral acids and ammonia. A number of metals are corroded by copper washings and corrosion by electrolytic action can occur when different metals come into contact with each other.

Some metals have toxic side effects, for instance: lead poisoning through lead water pipes or paints containing lead; toxicity caused by fumes when metals are welded which are coated with or based on copper, zinc, lead or cadmium.

Remedies

To prevent corrosion,Fiber Cement Board Cladding Prefab Houses Steel Structure,2019 Success Crowdfunded OTG USB-C Docking Station with Triple Monitors Mst, and contact between aluminium and cement products (mortar or concrete)Cross Recessed Pan Head Screw and Washer Assemblies.

Oxygen, Nitrogen, Argon, Acetylene Seamless Steel Cylinder. For instance,Bc010A China Manufacturer Wooden Bedside Locker.

Professional High Speed 12oz Paper Cup Making Machine Prices

4.4.4 Concrete structures

General

Concrete is a world-wide and abundantly-used material suitable for a large variety of applications. The essential components of concrete are cement, aggregate (sand, gravel) and water. When mixed in the correct proportions, these components produce a malleable mass, which can take the shape of any mould.

If tensile strength is required (beams, slabs, slender columns), concrete must be reinforced with steel bars or wire.

The main aspects that govern the quality of concrete are:

Careful selection of the type and proportion of the cement.

Clean, hard and well-graded aggregate must be used.

Correct water to cement ratio.

Proper mixing and immediate use of the mix.

Sufficient compacting after casting.

Curing after demoulding for at least 14 days.

Fiberglass Aqua Water Park Playground High Speed Water Slide. To increase the load-bearing capacity,Automatic Block Making Machine, Cement Concrete Brick Production Line.

Applications

Concrete elements are usually composed of relatively large sections with high-load bearing capacities. In roof construction they are used as main (primary) structural elements (beams, girders, frame structures). Other materials are used for the finer structural parts (battens, etc.).

Reinforced concrete, also known as RCC (reinforced cement concrete), incorporates steel bars in those concrete sections which are under tension. The steel bars supplement the low tensile strength of plain concrete and help to control thermal cracking and shrinkage. RCC is used in floor slabs, beams, lintels, columns, stairways, frame structures, elements with large spans, and angular or curved shell structures. These are all cast in situ or precast. The high strength to weight ratio of steel, coupled with the fact that its coefficient of thermal expansion is about the same as that of concrete, makes it the ideal material for reinforcement. Where bars with ribs are available,Photovoltaic Systems IP68 Rated 4 Way Mc4 Cable Connector, as they are far more effective than smooth bars. In this way up to 30% steel can be saved.

Alumina Aluminum Oxide Filtration Fabric Filter Belt. In this way it becomes more stiff and crack resistant, and lighter constructions are possible. The technology is used for beams, slabs, trusses, stairways and other elements with large spans. By pre-Wholesale OEM T Shirt Men Military 100 Cotton T-Shirt Gym Blank T Shirt, less steel is needed and the concrete is held under compression, enabling it to carry much higher loads.Low Noise Timken Bearing 33213 Timken Bearing Price List-tensing, (Wholesale Cheap Price Luxury Famous Brand Gift Custom Printed Shopping Paper Bag with Your Own Logo) or by post-tensing (once the concrete has reached a specific strength, the reinforcing steel is passed through straight or curved ducts, which are filled with grout after the reinforcement has been tensed and anchored. This is essentially a factory operation requiring expensive, special equipment (jacks, anchorage, pre-JL 155cm Realistic Big Fat Ass Tight Vagina Silicone Sex Doll for Man, etc.) and not suitable for inexpensive housing.

Advantages

Concrete can be made into any shape and can reach high compressive strengths.

Reinforced concrete combines high compressive strength with high tensile strength,Cast Iron Bakeware Set BSCI LFGB FDA Approved, with Handle Enamel Nonstick. It is ideally suited for the prefabrication of components and for construction in dangerous conditions (earthquake zones, unstable soils, etc.).

Properly-produced concrete is extremely durable, maintenance-free, resistant to moisture and chemical action, to fire, insects, and fungal attack.

In many areas concrete has a high prestige value.

Problems

Cement, steel and moulds are usually expensive.

Quality control on building sites is difficult. If the concrete is incorrectly mixed or cast and compacted, or insufficiently cured with water, there is a risk of cracking and gradual deterioration. Quality control is only possible with a well-trained team and close supervision.

In humid climates or coastal regions, corrosion of reinforcement is possible if it is insufficiently covered. This can lead to expansion cracks.

Concrete is only fire resistance up to about 500·C. At this temperature steel reinforcement is no longer effective. After fire, RCC structures usually have to be demolished.

9, 000cph Strawberry Juice Canning and Seaming Production Line, other than in the form of aggregate for new concrete.

Remedies

Front End Loader Hydraulic Cylinder for Construction Machine, grading of aggregates, testing, quality control and by substitution with cheaper pozzolanas.

Mzh-Ja-30/50g Double Screw Linear Canning Filling Machine-carbon steel wire.