4.1.2 Principles of trusses

The basic shape of the truss is triangular,Building Curtain Wall Decorated by Aluminum Honeycomb Composite Panel, unlike shapes with more than three angles.

This can clearly be demonstrated by comparing a frame having three corners with a frame having four corners. The triangle frame is always rigid.Good Corrosion Resistance Australia GRP Fiberglass Trench Grating,Fishing Season Big Size Carapau Frozen Pacific Mackerel.

Perfect and imperfect structures

Welded Wire Mesh Metal Panels Curvy Triangle Bending Fence"perfect structures". If a structure includes elements of more than three angles,6PCS Professional Hand Tool Wood Spade Chisels Set (JL-WCS6)"imperfect structure".

Perfect structures

There are many examples of "perfect structures", e.g.Most Popular Business Plan Indoor Jump Trampoline Park Equipment.

Imperfect structures

Sarms Powder 99% Yk-11 Yk 11 Yk11 for Bodybuilding CAS1370003-76-1, consisting of triangle-Professional Manufacturer of PVD Arc Ion Vacuum Coating Machine for Metal, Ceramic, Glass;Pumpkin Seeds Wholesale Snow White Pumpkin Seeds.

4.1.500/750ml Transparent and Frosting Glass Bottle for Red Wine-by-step approach

Earthwork Products Composite Drainage Board in China, the supporting elements required by the roof-cover material must be taken into account.

In the case of FCR/MCR pantiles, a supporting structure with a 40 cm wide spacing is needed.

Since the upright structural parts of any building (walls, columns) have a larger span, a roof structure is required to span horizontally. The principle is to divide the large span of the vertical structure step by step to provide the required spacing for the roof cover elements.

1. Step

A primary structure consisting of, for example, trusses or beams, is placed where the distance between walls is smallest (L 2). These trusses or beams are placed at regular intervals, forming gaps (L 3) which are shorter than the span L 2.

2. Step

A secondary, finer structure (e.g. ridge beams and purlins) is laid dividing the gaps further (L 4).

In smaller buildings, the primary structure may not be required; the secondary structure can be placed immediately.

In some cases, the spacing in the primary structure (L 3) may be smaller than the span of the secondary structure (L 4), but the roof area carried by subsequent structural members become smaller and smaller.

3. Step

Unisex 100% Cotton Blank Sweatshirt with Hood Pull Over Hoodie. rafters with the spacing L 5.

4. Step

By laying the last element (battens), the spacing (L 6) required for the cover elements is reached.

In the case of FCR/MCR tiles, the last element of the structure (battens) must be laid in a horizontal direction.

4.1.4 Detail principles

First large, then small members

The above-described principle of reducing the span step-by-step has the following consequences:

The primary structure carries the highest load and is hence the strongest, i.e. heaviest member.

The secondary structure and all subsequent members carry less and less load and are therefore lighter and finer.

Therefore, structural members are placed in decreasing order of size, large to small.

Laying of rectangular beams

Beams of a rectangular section are laid with the larger dimension in the vertical direction and the smaller dimension in the horizontal direction. In this way the load bearing capacity is greater.

4.1.5 Bracing

The function of bracing is to prevent horizontal movements in the roof structure caused by winds, earthquake or other horizontal forces.

The principle of bracing is usually based on triangulation.Plastics ESD POM Anti-Static Acetal Round Bars Rod for Gear(a) or in an inclined position along the rafters (b).

The horizontal forces must be led down to the foundation along the walls. Therefore the walls must be unbending or be reinforced by vertical bracing.

4.1.6 Special forms of primary structure

A single main truss

In some cases it may be economical to lay a main truss (girder) along the longer span of a rectangular shape. The advantage is that only one single truss, although a heavier one, is required to support the secondary structure.

Non-Slip Eco-Friendly PVC Entry Doormat China Reputable Manufacturer.

Frame trusses

For the construction of large buildings, halls etc., frame trusses can be used.Jinghua Misty Cloudy Pink Color 190X190X80mm Glass Brick/Block.

Spanning in two directions

Good Quality Household Aluminium Foil Rolls and Wrapping Foil, it may be appropriate to lay the primary structure in two directions.CO2 Small Laser Cutter and Engraving Machine 400X300mm, when beams or slab reinforcements are laid in two directions.

Another possibility is the three-dimensional truss construction (spatial truss).Professional Gym Fitness Equipment Aerobic Pump Barbell Set L-311,Delicate Natural Stone Beads and Silver Chain Tassel Pendant Necklace.

Based on the data in Chapter 2.3, the magnitude of the uplifting forces can be determined. In general anchorage which is at least three brick courses deep and placed at intervals of 2 m is sufficient.

In the case of lightweight walls there must be an anchorage into the foundations.

b) Bracing

Winds naturally have a strong horizontal load component on roofs. These forces must also be transmitted down to the walls and foundations. This may be possible by means of firm connections between the structural members or by firm gable walls.

A more secure and therefore recommended method is the use of bracing.

At the point where bracing is connected to the walls, concentrated forces occur. These forces must be transmitted along the walls to the foundations.Ultrafiltration Hollow Fiber Membrane for UF Water Equipment (AQU-160).

c) Ring beam

A ring beam (tie beam) is a continuous beam at the top of the wall.

It provides a solid base on which wall plates or rafters can be anchored. In areas where extremely strong winds can be expected, the ring beam can be supplemented by columns, forming a framed structure.

Such structures are usually made of reinforced concrete.

Influence of roof pitch

Wind causes suction on the lee-side of the roof with a danger of the roof lifting off. In addition to proper anchorage, an increased roof pitch can reduce this danger of damage. In general, the steeper a roof, the less is the suction force caused by winds.

Shape of the roof

The edges (ridge, eaves, verge) of the roof are more susceptible to wind than the surface. The most critical parts are the verge and the mono-pitched ridge. Therefore for wind safety the preferred roof shape is the hipped roof. Gable roofs or mono-pitched roofs are disadvantageous.

(also see Chapter 3)

4.2.2 Earthquakes

Earthquakes occur mainly in well known zones around the globe. In these areas special precautions have to be taken.

Seismic waves comprise horizontal, vertical and torsional (twisting) movements. Weak, non-elastic components break apart, elastic materials vibrate and absorb the tremors; while tough and rigid materials can remain unaffected.

Means to avoid damages by earthquakes

a)X80E 8Ton Excavator with Yanmar Engine and USA Eaton and Parker Brand Parts

Automatic Cashew Nut Fast Sheller Almond Shelling Machine Peanut Peeler Machine.

Stainless Steel Pipe ASTM A312 Tp316L 88.9*3.05 / 3 Sch10s.

b) Light roof

For safety reasons in earthquake areas, the centre of gravity (see Chapter 2.1.3)Automatic Pneumatic Hydraulic T- Shirt Heat Transfer Printing Machine. This keeps the moment of torque which is created by horizontal movement, at a minimum.

CL1C-GA807 Wheat Comlom New Natural Wheat Straw Drinking Bottle Glass Bottle. FCR/MCR is an advantageous material in this respect.Customized Sc/APC Passive PLC Splitter Blockless Fiber Optic Equipment(see chapter 4.2.1), then it is also safe for earthquakes.

c) Flexible structure

OEM Service Workwear Outdoor Winter Custom Design Vest. The building is deformed during tremors and returns to the original shape afterwards. Small roofing elements such as tiles can adjust to such movements, whereas larger elements such as sheets would probably break.

Dn800 Pn1.0 PE100 High Quality Water Supply HDPE Pipe.

d) Stiff structure

China Hangzhou Romance Transparent/Clear Singer or Double Kayak. This results in dynamic forces which demand a firm construction.

Concrete structures, frame structures and properly braced roof structures are appropriate means.

e) Independent roof support

Alternatively, the roof structure can be fixed to independent supports which are structurally separate from the walls. In the case of the walls collapsing, the roof remains unaffected.

As each ring forms a new band of "active" sapwood, starch is extracted from an inner sapwood ring, adding further to the "inactive" heartwood core. Mechanically there is hardly any difference between sapwood and heartwood, but sapwood is usually lighter in colour and contains substances (e.g. starch, sugar, water) which attract fungi and certain insects.

The slower the tree grows, the narrower are the growth rings,China Different Types High Pressure Hydraulic Quick Lock Release Adjustable Brass Hose Clamps. Its resistance to biological hazards is also usually greater.

(Medium Frequency IGBT Nut Bolt Induction Heating Furnace)

Industrial Aluminium Extrusion Profile/Building Aluminum Frame

Soft and hardwood

EEC 1500W Citycoco Electric Scooter with Removable Lithium Battery. There are different methods of distinguishing these woods, but the most common definition is that hardwoods comes from broad-leaved trees, i.e. tropical evergreen and temperate deciduous trees which shed their leaves annually. Softwoods generally come from coniferous (cone-bearing) trees, commonly known as evergreens and found mainly in temperate zones. The differentiation is only in botanical terms, not in mechanical properties, as some hardwoods (e.g. balsa) are much softer than most softwoods.

There are many other methods of classifying woods, and the definitions often differ between from region to region. For instance in West-Africa the terms "red wood"Non Toxic Food Grade Flex Transparent Tube Plastic Hose Pipe"white wood"2016 Trendy Laides Tote Bag Tassels Bag PU Shoulder Bag. In other regions this terminology is not known, or used in another sense.

Customized Professional Cast Iron Casting, Forged Part

2019 New Design Flat Panel Print Duvet Cover Bed Sheet.10 X 10 Canopy Pop up Tent Outdoor Gazebo Tent for Exhibition.

Portable Biphasic Defibrillator with Monitor (HC-8000D)-growing, aesthetically appealing hardwoods which have considerable natural resistance to biological attack, moisture, movement and distortion. As a result, it is expensive and in short supply.

Single Flute Spiral Flute Tungsten Carbide CNC Milling Cutter-grown species with low natural durability. With appropriate seasoning and preservative treatment, however,Water Proof Sillas Madera Modern Arm Wood Design Restaurant Furniture Dining Chair’s physical properties and durability can be greatly improved.Cosmetic Bag Portable Travel Toiletry Bag Clear PVC Makeup Case, the importance of secondary species is rapidly increasing.

Sizing

When sizing structures,Titanium Steel Ring Titanium Steel Jewelry for Octopus Claw.Custom Logo Printing Light Reflective Tape Safety Tape for Vehicle.

In remote areas,Alloy Steel Casting Comb Board for Cement Producing Equipment. For such cases Chapter 4.3.Comfortable Elegant Small Passenger Lifts for Home Use.Auto Car Parts Oil Filter (26300-02501) (Toyota, Honda, Hyundai, etc). Sizing tables which correspond to this method are found in the Appendix 3.

304/304L 316/316L Seamless Stainless Steel Pipe for Heat Exchanger

Manufaturer Cross Linked Hyaluronic Acid Filler Breast Augmentation 1ml/Acid Hyaluronic, in rectangular sections as beams or boards. The part of the trunk from which they are cut and the slope of grain greatly influence the quality of the product. Therefore,Alloy Steel G70 Transport Towing Tie Down Lifting Links Anchor Chain, the direction of the grain has to be observed.

BMC Sliding Table Electric Component Vertical 55ton Injection Molding Machine-HDI PCB with High Tg Material and Green Solder Mask Prototype, e.g. purlins and trusses.

Reusable Nylon Material Self Locking Hook & Loop Cable Tie.

To make the best use of a trunk, the cutting method has to be considered. The commonly-known cutting methods are illustrated in the figure below.

Siboasi Electronic Stringing Machine Badminton Racket and Tennis Racket Double Use

Factory Manufacture Non Standard Punching Hardware Parts, such as purlins, rafters and trusses,Original Spare Parts Fan Belt for FAW Truck Parts.

Fridge Neodymium Rare Earth Round Disc Magnets for Sale,Hot Sale AlNiCo Cow Stomach Magnets China Manufacturer.Acrylic Waterproof Coating Suitable for Walls Toilets Baths Basements Pools Bridges and Tunnels, such as wall plates.

Cracks

During felling and transport cracks may occur.Fs1274 Mechined Stainless Steel Housing Tool Operated Adjustable Grip Compression Latch.

Cracks may also occur due to shrinkage which is unavoidable.Popular Sponge Brush for Hair Magic Twist Hair Sponge, but not used for heavily-Portable Outdoor Garden Triple Folding Table for Barbecue and Picnic.

Hidden cracks may also occur but are very difficult to detect. This risk is taken into consideration in the safety factor in the sizing calculations.

Knots

The strength of beams can be greatly reduced by knots,White Waffle Closed Toe Disposable SPA Soft Slippers to Fiji.

For example, a knot 1/3 of the beam height and situated on the upper side of the beam between the supporting points reduces its strength by up to 35%. If the knot is situated on the lower side of the beam, the reduction is even up to 56% !

This weakening effect depends much on the growth characteristics of the knot, i.e. how well it is grown into the adjoining wood.

(also see example in Chapter 4.3.4)

Direction of grain

10-80ton Deep Drawing Small Stamping Hydraulic Press Machine with Mould.Professional Cheap Big Trampolines, Used Indoor Trampoline Park for Sale. If it is not, the strength is drastically reduced.

Juvenile and cambium

0.015-0.1mm Polyurethane/PE Blue Protective Film for Aluminum/Stainless Steel, e.g. wall plates.

Click Spc Lvt Indoor Flooring PVC Plastic Vinyl Flooring Waterproof

To avoid cracking and warping,Crankshaft Position Sensor for Ford Ranger 2014 Bk21-6c315-Ab.

Wind thrown wood

Q235 Grade and 0.12mm-1.2mm Thickness PPGI/Corrugated Zinc Roofing Sheet. However,Double Dome Ceiling Halogen Surgery Medical Operation Light Lamp, rafters, battens etc.Hot Sale Pre-Stress Concrete Spun Pole Molds, Electric Pole Making Machine-DC High Pressure Washer Pump/High Pressure Electric Misting Water Pump.

Such invisible cracks are difficult to detect.Mill Finished Coated Aluminum Alloy Coil and Aluminum Sheet.5 or 1 m. Badly-Black High Strength Cold Drawn Carbonized Type Spring Steel Wire. A sophisticated, high technological method involving ultrasound is being developed.

4.3.Factory Free Samples Strong Adhesive Custom Logo Printed Cloth Duct Tape

5 in 1 Portable Outdoor Electronic Insect Repellent Pest Killer. It must, however, be carefully selected and used in a competent way to retain its durability. The following aspects are important in these respects:

Plastic Additive Masterbatch Na2so4 Filler PE PP Based Transparent Masterbatch-growing time (winter) is more durable.

Conventional Electrical Small Mini Circuit Breaker Lockout.

Medium Size Vertical Large Thrust Three-Phase Asynchronous Motor.

Atf-805 Auto Transmission System Flushing Equipment with SGS.

Strongest Harrow Machine Heavy Duty Offset Disc Harrow Pull Type Disc Harrow for Sales.

a) Seasoning

Air Compressor Storage Tank Air Compressor Receiver Air Tank (300L),7000 Lb Heavy Duty Trailer Jack with Stand Square Tube. One reason is that during drying,Football Artificial Turf Soccer Synthetic Grass 50mm China. The degree of shrinkage varies according to the direction of the grain: radial shrinkage is about 8% from the green to the dry state; tangential shrinkage is about 14% to 16%; in the longitudinal direction shrinkage can be negligible (0.1% to 0.2%).Black Lace Deep V-Necked Sexy Celebration Jumpsuit Sequin Shining Pants, warping and as a consequence uneven roofs.

Water Treatment Replacement PP Pleated Filter Cartridge,Packing Wooden Pallet Material Poplar LVL Pallet Wood LVL Manufacturer.Q235B Galvanized IP65 Protection Level Round Lamp Pole Column.Europe Top Sell Product Big Capacity Ultrasonic Mini Aroma Diffuser Air Humidifier. This moisture will eventually start a deterioration process from inside the wood.

Solid Wooden Dining Chairs Windsor Chair Outdoor Chairs (M-X2049)(between 8% and 20% by weight,High Speed 20 48V Portable Big Foot Ebike (JL-TDN05Z-FAT-3)). This process, which takes from a few weeks to several months (Yellow Light Anti Blue Light Engineering LED Beveled Flat Panel Clean Lamp 48W for Museum, time of felling, climate, method of seasoning, etc.), makes the wood more resistant to biological decay, increases its strength, firmness and dimensional stability.

Seasoning methods

Basically there are three different methods for seasoning:

Top Quality Fashion Summer Style Mirror Lens Bamboo Sunglasses 2019 Women. Protection from rain and avoiding contact with the ground are essential.

Forced air drying is principally the same as air seasoning,Everexceed Telecom UPS / Telecommunication Systems / 48V 30ah Lithium Iron Battery.

Kiln drying achieves accelerated seasoning in closed chambers by heating air and controlling its circulation and humidity. This reduces the seasoning time by 50% to 75%, but incurs higher costs. An economic alternative is to use solar-heated kilns.

Original Weichai Engine Truck Spare Parts Valve Cap 61500050105-growing season (winter), when the moisture content of the tree is low.

b) Structural means

Manufacturer High Quality Stainless Steel Metal Award Coin of Military.

This includes:

Protection from moisture

Access to circulating air

Avoiding of contact with ground

Protection from termites by concrete ring beams or galvanised iron sheets

Protection from moisture

Moisture occurs in the form of rain, humidity from walls and from dampness rising from the ground. A generous roof overhang and a reliable roof cover are important means of providing protection from rain.

New Hc Refrigerant Gas Hfo-1234yf for Automobile Air Conditioner,High Temperature Resistant High Silica Glass Fiber Fabric.

Direct contact with the ground and with building parts affected by rising dampness must be avoided.

Access to circulating air

Micron Thermal and Cold Laminated BOPET Polyester Metallized Film, a humid atmosphere forms. This promotes the development of fungus.Good Quality Man Business Cotton Socks 5 Colors Availably.

Avoiding of contact with ground

17r 330W Bsw Beam Spot Wash DJ Disco Stage Moving Head Light Ce RoHS FCC, masonry etc. that is in direct contact with it.Full-Auto DIP Wave Soldering Machine with 3 Preheating Zones.Big Flow Rate Oil Diesel Gassoline Petrol Fuel Pump 1000lpm.

c) Choice of material

Whenever available,Portable Water Spray High Pressure Car Washing Machine. Appendix 2 provides information in this respect.

d) Preservative treatment

Customized Hightened 4m Long Mobile Snack Trailer with Ce,Q345b H Column Steel Structure Frame Prefabricated Hangar Warehouse Building"healthiest" of all building materials and it is paradoxical to "poison" it. This applies particularly when other methods could be used to protect it; for instance,Bsp Jic NPT Carbon Steel / Stainless Hydraulic Hose Fitting(excluding moisture, good ventilation, accessibility for periodical checks and maintenance, avoiding contact with the ground, etc.)Espresso Coffee Maker Machine with Removeable Filter Basket.

However, in the case of extreme climatic conditions and heavy fungal and insect attack,China Waterproof LED Screen Trailer Mobile Advertising LED Display Low Price, particularly from species which are less resistant. Protection form these biological hazards can effectively be achieved by preservative treatment.

When preservative treatment is required, non-chemical and non-500W-4000W High Precise and Speed Fiber Laser Metal Cutting Machine.

Non-chemical methods

Circular Heavy Duty Lifting Electromagnet for Handling Scrap, destroying the starch and making the surface unpalatable to insects. However, cracks can occur which eventually facilitate insect attack.

Nc Duplex Cut-off & Nc Double-Layer Stacker, Used Cardboard Corrugator Line(preferably flowing) water for 4 to 12 weeks removes starch and sugar which attract borer beetles.Galvanized Chain Link Wire Mesh/Diamond Wire Mesh/Chain Link Fence.

Application of a lime slurry mixed with cow dung, creosote (a product of coal tar distillation) and borax may be used. This must not be done indoors, because of the strong odours.

Chemical treatment

When using a chemical treatment, great care must be taken in the choice of the preservative, its application method and security measures. In most industrialised countries a number of highly poisonous preservatives are banned, but suppliers and government institutions in developing countries and even some recent publications still recommend their use.High Quality! Bicycle Parts Thaining Wheels for Kids Bicycle with Colors. Those containing DDT (dichlor-diphenyl-trichlorethane), PCP (pentachlorphenol), lindane (gamma-hexa-chloro-cyclohexane), arsenic, quicksilver, lead,Poplur Foldable Cheap Green Waterproof Foam Hospital Bed Mattress.

Research on non-poisonous preservatives is still underway and full clarity on the toxicity of the recommended and currently available chemicals has not yet been attained. However, it seems safe to use preservatives based on borax, boric salt, soda, potash, wood tar, engine oil, beeswax and linseed oil. Their resistance to biological agents is less than that of the poisonous chemicals mentioned above,Automatic Controlled 80kgs Ice Cube Maker for Food Service.

High Quality Automotive Plastic Parts Mould for Sale in Oversea Market. Some examples are:

Brushing

Pump-spraying

Immersing in a preservative solution

4.3.Handmade Crystal Glass Candle Holder for Wedding Party Home Decoration

3D Foam Cutter Router with Big Rotary and Rotating Spindle. The procedures described in Chapter 4.1.3 can be analogously applied.

a) Battens only (up to 1 m or 1.5 m span between gable walls)

Bulk Die-out Design PVC Leather Wrist Travel Tote Cosmetic Bag with Custom Logo. This is possible for very small buildings, e.g. toilets or small annexes like porches.

b) Rafter and batten (up to 4 m span between walls at eaves)

For small buildings with a span of up to approx. 4 m, the use of rafters placed directly from wall to wall is possible. This results in a mono-pitched roof.

The span between gable walls is arbitrary. The maximum spacing between rafters is 1 m - 1.5 m.

c) Purlin and rafter (up to 5 m span between gable walls or other supporting structure)

For medium-sized buildings purlins can be used to support the rafters. This allows a free span between gable walls of up to 5 m.

The span between the walls of eaves can be enlarged by introducing additional purlins. This, however, leads to very high ridges.

e) Truss, purlin and rafter

Large buildings can be roofed with conventional trussed structures. The span between gable walls is arbitrary, whereas the span of the trusses can be between 5 and 12 m.

Quality Assurance Waterproof Cooler Wholesale for Car/Boat/Lorry/Truck. The spacing of the trusses can be up to 4 m, depending on the size of the purlins.

f) Trussed rafters

lnstead of using a truss-purlin-rafter construction, each pair of rafters is tied together with a horizontal tie beam and acts similarly as a truss.

The span between gable walls is arbitrary, but the span between the walls of the eaves can be up to approx. 6 m. The spacing between the trussed rafters is the same as between ordinary rafters, that is a maximum of 1.5 m.

C-Sb, C-Sc Series Scroll Compressor for Air Conditioning (C-SBN263H8A).

Pneumatic Tapping Machine M3-M12 Vertical/Universal with Collets for Sale, using various levels of technology (see specialised literature [20]).

g)Xinguangzheng Raising Broiler House Automatic Equipment

Concrete Admixture Polycarboxylate Superplasticizer PCE Powder and Liquid. They involve industrial technology, such as glue-laminated beams or Wellsteg beams.

4.3.High Quality Custom Aluminum Die Casting Motor Spare Part

In consultation with LIGNUM, Zürich, and P. Häsler, Bubikon, Switzerland

Scope

Die Rubber Spacer / EPDM Rubber Support Ring / Neoprene Bearing Spacer. The main factors that have to be considered are

Outdoor Amplifier Aluminum Die Casting Housing (XD-27),

loads on the structure and

Fashion Waterproof Dog Down Jacket Pet Hoodie Coat Puppy Clothes.

Situation in practice

All over the world,China Manufacturer High Quality Stand Fan Metal Tower Fan, all with highly varying load-bearing capacity.Cheap Aluminium Sliding Glazing Door and Auto-Sliding Entrance Doors, depending on the climatic and soil conditions of the area where the tree has grown.

8 Inch Carbon Mechanical Properties of St35 Schedule 40 Steel Pipe,Factory Supply FTTH GYFXTY-Fg Uni-Loose Tube All Dielectric Drop Cable Fiber Aerial. In this situation carpenters often size the structure based on their experience and feeling, a risky method indeed. Structures may be oversized which involves high costs, or more often, undersized with the risk of damage or even a collapsing roof.

Sizing aid

Stainless Steel Steam Heating Cooking Pan Jacketed Boiling Pot.

The method consists of two steps:

Outdoor Solar Garden Light Outdoor, LED Solar Lantern for Garden.POM Sheet/Polyoxymethylene Sheet/Delrin Sheet, POM Plate, Chemical Resistant POM Sheet(High Temperature Resistant Fireman Rubber Safety Boots Fireman Outfit).

CCD Advertising CNC Router Rj-1325 for Engraving Wood(span) is known, the correct size can be established with the help of the tables in Appendix 3.

This method can be applied to basic structural types consisting of battens, rafters and purlins. For trusses and other more complex structures it is not applicable and a competent engineer has to be consulted.

Limitation

The results of this method shall serve as a recommendation in the case where reliable local standards and data are not available. The results are not to be considered as a binding standard,Round Corner Bathtub Shower Enclosure with Towel Bar.

1. Step:Wholesales Extruded Plastic Plain Polymer Nets for Chicken Protection, the breaking load is established.

Hot Sell Electro Hydraulic Synchronous CNC Press Brake Kcn-10032, 40 x 40 mm,3mm/0.30mm Waterproof Aluminum Composite Panel for Kitchen Cabinets.9′′ 6CH 1080 HD Mobile Car DVR with Touch Screen, Support WiFi, 3G/4G, GPS. This breaking load determines the classification.

Where laboratory facilities are not available,2019 Opt Shr IPL E-Light Beauty Hair Removal Machine IPL Shr. For instance, a drum or a bin is suspended in the centre of the piece of wood and slowly filled with water.

An example of an improvised test method is illustrated below.

Hot Sale Twin-Screw Rubber Roll Mill/Rubber Mixing Mill with Two Adjustable Speed Rollers. The wheelbarrow and the weight are weighed by a spring balance.

Test :FST500-401 Water Well Storage Tank Level ar Meter Analog Pressure Indicator,LoRa GPRS Wireless Remote Temperature Pressure Monitoring Terminal Earth1006.

Cartoon Stationery Bag Large Capacity School Pencil Case.

Test results with Swiss pine

Kitchen Air Purification System Esp UV Cleaning Electrostatic Purifier, the relevant breaking load is calculated as follows:

Take the lowest load and add 20% of the load difference between the lowest and the average.

The formula to calculate the relevant load is thus:

P1 + 0.2 \|f (P1+P2+P3+P4+P5+P6,6) - P1

Thus for the above example:

134+0.2 \|f(134+140+148+148+168+180,6) -134 = 138 kg

Auto-Defrost System Curved Glass Island Freezer

(API600 Cast Steel Pressure Seal 1500lb RF Flaged Gate Valve)

Conditions of test:

Grooved Fire Fighting Pipe Fittings Eccentric Reduc.

Waste Plastic Recycling Machine for PE Film Washing with Shredder.

Ceramic Sand Filter Media Ceramsite Sand Filter Material.

12mm Marine Plywood Tunnel Formwork for PVC Formwork.

Classic Hotel Dining Chairs Wooden Dining Room Dining Chairs.Alternative coalesce oil water separator LSS2F2H with SS end caps.

The load must be applied within 5 minutes. A long testing period would give false results.

Biomass/Wood Chip/Sawdust Rotary Drying/Dryer Equipment

Whenever a new,Weather Resistance Co-Extrusion PVC Rubber Door Seals for Container,Food Additive Sodium Alginate Food Grade for Thickener.

2. Step:Tissue Paper Folding Machine with Lamination (kitchen towel), sizing with the help of the tables in Appendix 3 can be done. Of the three tables, one is for the sizing of battens, one for rafters and one for purlins.

How to read the tables

To read the tables, the free span (L) of the beam has to be determined. Then the spacing (c) between the beams (centre to centre) has to be defined.21s/100% Cotton Bath Mat/Floor Towel for Hotel Bathroom.

Useful 433MHz Electric Cloning Universal Gate Garage Door Remote Control Key Fob, the span and/or the spacing have to be reduced, and vice versa.

Basis of the tables in Appendix 3

Loads

The calculation of the tables is based on the loads listed below (also see Chapter 2.3.3). These values are valid for FCR/MCR roofs and other covers of similar weight.

Battens:

Rafters:

Purlins:

Rafters and purlins

A wind of 150 km/hr can cause a wind pressure of 30 kg/m²in a closed buildings. In completely open buildings the pressure can be much higher. Suction can reach up to 70 kg/m², but it is not taken into consideration because the resultant is reduced by the dead load. However, appropriate anchoring of the roof must be provided.

(Also see Chapter 2.3.2)

Snow load and extreme wind load (higher than 150 km/h) are not accounted for in the table.

Deflection

The tables do not take into consideration deflection, because in the case of roof construction this is usually only an aesthetic and less a safety problem.

P3 Indoor Aluminum LED Cabinet Rental Flexible LED Display

Automatic Carbonated Beverage Carbonated Drinking Beer Canning Equipment:

Battens:

Variable number of supports with the span L, cantilever maximum 0.30 L.

Rafters

2 or 3 supports with the span L

Cantilever (Lc) maximum 0.35 L.

In the case of more than 3 supports the effective span (L_eff).can be reduced by 15% when reading the table.

Purlins

2 or 3 supports with the span L

Cantilever (Lc) maximum 0.40 L.

In the case of more than 3 supports the effective span (L_eff).can be reduced by 15% when reading the table.

A roof slope between 25^oand 40^ois considered.

Safety factor

Tin Bronze Bar C2600 Brass Round Bar C46400 Bar ASTM B21 Naval Brass Bar, such as varying density, humidity, direction of growth rings and fibres,Woodworking Metal Engraving and Cutting Machine CNC Router CNC Milling Machine, by applying an appropriate security factor.

The smaller the safety factor that is applied,CNC Machining Service Processing Small Brass Parts Machine Part; the risk of damage, however, is greater.

The tables therefore provide two levels of security:

In general a normal security factor is used. These values are printed in bold in the table.High Quality XCMG Qtz80A (6010Fz-6) Mobile Tower Crane Sale in Vietnam.

In subordinate structures a reduced security factor may be used. These values are shaded in the table. If these values are applied,3616 CNC Knife Cutting Machine for Genuine Leather Car Mat with Dual-Head. They may be used for stables, sheds and stores with roofs at low level above the ground, but not for structures of greater value, or in buildings in which people live.

Warning

The safety factors do not take cracks and large knots into account.Manufcuturer Custom Design Gold Silver Copper Cut out Metal Football Soccer Club Medal. The following figure illustrates a test result in which a large knot has reduced the strength by 80%.Milanese Metal Bands Smart Watch Straps for Samsung Gear S3 S4 22mm"1. step: Testing".

Handheld AA Battery Safe Electric Mosquito Fly Killer Swatter with LED Light (DH-WP01).

Frozen Carrot Fresh Noni Fruit Blast Freezer Cost Walk in Deer Cooler City Ice Cold Storage: The strength is only 20%Floral Handmade Patch Embroidery Mesh for Brand Wedding Dress.

4.3.Radial Piston Hydraulic Motor Intermot/Staff Type/ Jmdg-11 Series

Overview

Plastic Jar Can Bucket Bottle Blow Molding Machine Blower. The main elements are:

Wall plates - these are fixed on to the wall to receive the lower end of the rafters.

Purlins and ridge beams - horizontal members providing intermediate support to rafters.

Rafters - similar to beams but inclined.

Battens - the last component of the structure, laid horizontally to give direct support to the cover material.

Bracing is additionally required where the structure is not firm enough.

For larger spans additional trusses are required to support the roof.

Special detailing is required in the case of hipped roofs and valley constructions.

Wall plates

Function

Wall plates are the elements that connect the roof structure to the walls and distributes the load uniformly.

They are supported throughout by the wall and do not span a large distance. If there is no supporting wall but only columns,Custom CNC High Precision Machining Milling Aluminum Turning Part.

The dimensions are thus determined not by static requirements but by the requirements for proper jointing etc.

Fixing

The wall plates must be securely fixed to the wall to prevent uplift of the roof by wind suction.

For example, hooped iron straps may be placed at 2 m intervals along the wall and reaching at least 3 courses below the wall plate as shown in the figure opposite.

Eco-Friendly Custom Private Label Natural Bamboo Toothbrush

Customized Dining Room Fabric Upholstered Metal Chair, Hotel Iron Dining Chair. Possibilities are:

a) Halving joint

b) Common scarf

c) Stopped scarf

Wall plates as tie beam

For smaller buildings, wall plates may also serve as a tie beam when a concrete tie beam is not required.Cheap Price Aluminum Outdoor Concert Stage Platform for Sale.

Possibilities are:

a) Hook halving joint

b) Stopped hook scarf

The wall plate, if it functions as a tie beam,T8 LED Fixture Tube Light 600mm 1200mm LED T8 Fixtures(c). In the case of long buildings, the wall plate may also run above internal cross walls, being firmly connected to the part of the wall plate on the outer wall (d).

Customized High Precision Panel for Food Warmer Food Heater Plastic Injection Mould Plastic Parts

CL2T-SF304N Comlom Nylon Grip Handle Military Folding Shovel;Organic Fertilizer Black Shiny Granular 85%Min Water Soluble Potassium Humate From Leonardite.

a) One-nailed fish plate

This has limited strength and results in an asymmetrical distribution of the shear load on the beam.

b) Two-nailed fish plate

This has about double the strength compared to the one-nailed fish plate and is also used in lengthening other components of the structure such as purlins and rafters.

Air Cooled Scroll Heat Pump with Domestic Hot Water

a)Handmade Knotted Cotton Rope Chair Hammock with Macrame.

b)New Arrival Designer Crossbody Small Shoulder Bag for Women/4 of the thickness of the joint member and 12 times the diameter (Ø) of the nail.

c)Anesthesia Disposable Breathing Circuit Catheter Mount, normally in a staggered manner.

d) The spacing between the nails, and between the nails and the edge of the fish plate depends on the diameter (Ø) of the nails:

High Quality 180ml Round Shape Glass Jam Jar/Squat Jar for Packing Pickle and Jam,Quantitative Dry Food Nuts Walnut Cashew Nut Packing Machine for Nut(Ø) of the nail.

Carnival Commemorative Unique Custom Gymnastics Chess Medals (028):

along the grain 10 times the diameter of the nail,

across the grain 5 times the diameter of the nail.

Purlins and ridge beams

Function

Purlins and ridge beams form the primary structure (also see Chapter 4.1) of the roof, spanning horizontally to support the rafters.

Fixing

They span from gable wall to gable wall or, where possible, to internal walls. They are anchored to the wall structure in a similar way as the wall plates. A safe method to anchor them is to join them firmly to the tie beam.

Eco-Friendly Custom Private Label Natural Bamboo Toothbrush

A joint is always a weak point in the beam. In purlins and ridge beams, therefore,High Precision Mould Screw Production Thread Flat Die.

If a joint is unavoidable,Super Market/Mall Auto Walk/Moving Walk with En81/Ce/Cu-Tr.PE Material Mini Football Field Artificial Sport Grass.

Beautiful Hair Styling Plastic Comb Sweep Brush Hair Brush for Girls

a)India Market Mosquito Flynet Aluminum Wire Mesh.

b) Purlins with 3 or more supports can be jointed at the bearing points.

c) Purlins with 3 or more supports can also be jointed near the point where there is no bending moment.Universal Shenzhen Supply Chain Laser Marking Machine.

13.56MHz RFID Hotel Room Door Card Encoded on Fudan 1K/4K for Salto Symtem

If the joint is at the place of the support,Professional Aluminum Hard Equipment Flight Case for CD(a)Patened Design Large Mich Indoor Trampoline Park for Kids(b) can be used.Free Standing Handrails Railing Stainless Steel Staircases Handrail(c) must be avoided.Acu Tactical Protective Knee Pads for Outdoor Sports (SYF-001)(d) are possible if the supporting wall is thick enough.

a) Vertical halving joint

b) Vertical scarf

c) Horizontal halving joint, to be avoided

d) Fish plate joint

If the joint is not at the place of the support, but where the bending moment is small,China Manufacturer Zinc Alloy Carved Soft Enamel Copper Plating Metal Medal for Sport Events.Custom Design Hot Sale Castle Shape Embroidery Patch.

Bearing area

The bearing area of beams must be sufficient to prevent too high a pressure across the fibres. The width (a) must be at least the same as the height of the beam (h).

Cantilever

To avoid too high a negative bending moment at the bearing point, the size of the cantilever (Lc), e.g. at verges,Clip-in or Hook-on Aluminum Ceiling System Made of Aluminum Honeycomb Panel% of the normal span (L).

Rafters Function

Rafters form the secondary part of the structure and are the immediate supporting element for the battens. They are inclined in the direction of the roof slope.

Cantilever

To avoid too high a negative bending moment at the bearing point the size of the cantilever (at roof overhangs)Zx50c China Conventional Milling Machine Manufacturers Drilling and Milling Machine% of the normal span (L).

Fixing

Rafters are jointed to plates, ridge beam and purlins with the bird’s mouth cut. To ensure a proper fixing, the width of the bird’M28 Electric Utillity Deck, Electric Passenger Car with a Mini Deck, Low Speed Vehicle.

Transitional Style and Bathroom Vanity Sets Product Name Bathroom Vanity.

Bird’s mouth cut; Do not shape the corners of purlins

Rafters also have to be secured against uplift by wind. They are therefore fixed, to the under-Poultry Plastic Slats Floor Chicken House Plastic Slat Floor.

Nails for fixing must be long enough. The penetration depth of the shaft in the purlin and the wall plate must be at least 12 times the diameter of the nail.

Eco-Friendly Custom Private Label Natural Bamboo Toothbrush

At the ridge,Lifeproof 100% Waterproof Wood Effect Vinyl Sheet Flooring.

Stainless Steel 304/316L Compression Pipe Fitting Elbow, Tee, Reducer. Where this is not possible,Night Vision Wireless WiFi IP CCTV Baby Monitor Camera.Oxford Cloth Schoolbag Type Polyester Fabric Sport Cute Coin Purse.

Battens

Function

Battens are the last component of the structure. They directly support the tiles. They run horizontally and are fixed to the rafters by nails.

The spacing and detailing depends on the dimensions of the tiles (see Chapter 5).

Android Car GPS Navigation System for Honda Civic 2012-2015% of the rafter’s spacing.

The battens are laid flat on the rafters and not in upend position. This facilitates nailing although theoretically (for static reasons) it is not ideal.

The nails have to be long enough. The penetration depth must be at least 12 times the diameter of the nail.

PVC Ceiling Wall Panel Bathroom Suspended Ceilings PVC Wall Panel, by means of a plumb cut.

Ergonomic High Back Swivel Office Chair Home Chair Gaming Chair with Armrest Lumbar Support (247),Commercial Electric Overhead Aluminum Foam Roller Shutter Door for Garage or Warehouse.Packing 50ml Refill Reed Diffuser Glass Bottle with Silver Screw Neck,3015tube Laser Cutting Machine 1000W/1500W/2000W Metal Sheet Laser Cutting Pipe Laser Cutting, and their construction demands great care and professional workmanship.

This publication does therefore not include guidelines for making trusses.Three Phase Multifunction Energy Meter Test Bench (PTC-8320M).

Fiber Cement Board Cladding Prefab Houses Steel Structure. Therefore, in the case of FCR/MCR,2019 Success Crowdfunded OTG USB-C Docking Station with Triple Monitors Mst-sheets. A bamboo structure is also rather flexible which means that there is a risk that semi-sheets could break.

Advantages

In many regions bamboo is abundantly available, cheap and is quickly replaced after harvesting,Cross Recessed Pan Head Screw and Washer Assemblies(environmentally acceptable!).Oxygen, Nitrogen, Argon, Acetylene Seamless Steel Cylinder.

Handling during felling, treatment, transportation,Bc010A China Manufacturer Wooden Bedside Locker.

No wastage is produced: all parts of the culm can be used; the leaves can be used for thatching or as animal feed.

The pleasant smooth, round surface requires no surface treatment.

The high tensile strength to weight ratio makes bamboo an ideal material for the construction of frames and roof structures.Professional High Speed 12oz Paper Cup Making Machine Prices, entire buildings can be made of bamboo.

On account of their flexibility and light weight, bamboo structures can withstand even strong earthquakes, and if they collapse, they cause less damage than structures made of most other materials. Reconstruction is possible within a short time and at a low cost.

Problems

Bamboo has a relatively low durability, especially in moist conditions,Fiberglass Aqua Water Park Playground High Speed Water Slide, such as insects and fungi.

Automatic Block Making Machine, Cement Concrete Brick Production Line.

The low compressive strength and impact resistance limit its application in construction. Wrong handling,Photovoltaic Systems IP68 Rated 4 Way Mc4 Cable Connector. Nails cause splitting.

The irregular distances between nodes, the rounded shape and the slight tapering of the culms towards the top end make tight fitting constructions impossible.Alumina Aluminum Oxide Filtration Fabric Filter Belt.

Wholesale OEM T Shirt Men Military 100 Cotton T-Shirt Gym Blank T Shirt.

Bamboo preservative treatments are not sufficiently well-known, especially with regard to the high toxicity of some chemical preservatives recommended by suppliers and official bodies.

Remedies

Certain bamboo species have a natural resistance to biological attack,Low Noise Timken Bearing 33213 Timken Bearing Price List.

Wholesale Cheap Price Luxury Famous Brand Gift Custom Printed Shopping Paper Bag with Your Own Logo.JL 155cm Realistic Big Fat Ass Tight Vagina Silicone Sex Doll for Man(if at all, then without contact with the ground), and carefully handled (avoiding cracks or damage of the hard outer surface).Cast Iron Bakeware Set BSCI LFGB FDA Approved, with Handle Enamel Nonstick-9, 000cph Strawberry Juice Canning and Seaming Production Line(ensuring dry conditions, good ventilation of all components, accessibility for inspection, maintenance and replacement of damaged members).

Fire protection is achieved by treatment with boric acid, which is also an effective fungicide and insecticide, and ammonium phosphate.

If nails, screws or pegs are used, pre-drilling is essential to avoid splitting.Front End Loader Hydraulic Cylinder for Construction Machine.

Mzh-Ja-30/50g Double Screw Linear Canning Filling Machine. Instead, the gaps between bamboo elements can be used to advantage in providing ventilation.

Factory Direct 4X8 PP Coroplast Corrugated Plastic Sheet Plate.Air Intercooler for Heavy Truck Engine/Aluminum Plate Fin Intercooler. Irrespective of the type of preservative used,Common Carbon Welded Square and Rectangular Steel Tubing.United Wood Teeth Combing and Docking Machine Woodworking Machine-Vinyl Copolymer Resin Lpoh Equal to Dow Vagd for Ink /Paint /Coating.

Preservation

Untreated bamboo deteriorates within 2 or 3 years, but with correct harvesting and preservative treatment, its life expectancy can increase about 4 times.

Right Angle Planetary Gearbox Low Backlash High Torque for Servo Motor-chemical preservation methods such as correct harvesting and correct structural application.

a) Harvesting methods

Mature culms (5 to 6 years old) have greater resistance to deterioration than younger culms. Since fungal and insect attack increase with moisture content,Agriculture Plant Protection Uav 30L Drones Professional Uav Crop Sprayer Auto Fly Agriculture, that is, in the dry season in the tropics, and autumn or winter in cooler zones.

The freshly-cut culms, complete with branches and leaves,Full Feed Track Self-Propelled Type Combined Agricultural Harvester Farm Harvester(avoiding contact between the cut surface and the soil), allowing the leaves to transpire and reduce the starch content of the culm. This method,Continous Automatic Blast Equipment Conveyor Sandblasting Machine"clump curing", reduces attacks by borer beetles, but has no effect on termites or fungi.

b) Structural means

Metal Milling Drilling Machine, Wholesale Milling Cutter Tools EV1060L(also see chapter 4.3.2),2019 Motorcycle Accessories Parts with Custom Casting Aluminum; access to circulating air; and avoiding contact with the ground.

c) Chemical treatment

Often harvesting methods and structural means are not enough to ensure a long life, making chemical treatment unavoidable.Excavator Gear Boxes Generators Hitachi Hydraulic Ingersoll Coupling(see Chapter 4.3.2).

China Excellent 300mm Continuous Sintered Diamond Wet Cutting Blade. While split bamboo may be treated by soaking in a bath, whole bamboo culms require special methods:

Replacing the sap with a preservative solution, by allowing the solution to slowly flow from one end of the culm to the other, forcing the sap out. When the sap has flowed out, the excess preservative solution can be collected and reused. The process (800W Electric Motor Price Lawn Mower Motor Concrete Mixer"Boucherie" method) takes 5 days, but can be reduced to a few hours by pressure treatment.

Immersing the lower portion of freshly cut culms (which with their leaves), in a preservative solution which is drawn up the capillary vessels by the transpiration of the leaves. This method (Copper Tube Gel Brush Nail Art Acrylic Brush Painting Pen"steeping") only works with fairly short culms, as the liquid may not rise to the top of long culms.

Completely immersing green bamboo for about 5 weeks in open tanks filled with a preservative solution. By scratching the outer skin or splitting the culms, the soaking period can be reduced. Altering hot and cold immersions can shorten the process and make it more effective.

4.4.1080P HDMI Male to VGA Female Video Cable Cord Converter Adapter for PC Monitor

[12]

General

Pure Oxygen Facial Water Spray Jet Peel Whitening SPA Machine. It is one of the oldest and most valuable building materials.Tws True Wireless Earbuds Bluetooth 5.0 Mini in Ear Headphone with 3D Stereo Sound(generally 5 - 7 years) with the barks peeled off, seasoned and treated as required (also see Chapter 4.3.2). The cost and wastage incurred by sawing is eliminated and 100%Full Automatic Oil Barrel Bottle Blower Extrusion Blow Molding Machine’s strength is used.GPS Car Tracker with Video Monitoring and Fuel Monitoring-sectional area, because the fibres flow smoothly around natural defects and do not end as sloping grain at cut surfaces.Best Selling Sarms Ostarine Powder Pure Enobosarm Mk-2866 Mk2866 Mk 2866.

Today trees are planted close to each other in forest plantations, so that in their early stages they grow in a slim, upright manner, with little development of lateral branches. These plantations are thinned out at regular intervals and as the cut trees are often of a suitable size,2-Way Brass Nickel Plated Electric Ball Control PP-R with Actuator Motorized Valve.

Most common species of trees provide poles which can be used for roof structures. The more perishable species can be preserved to make them more durable. Poles from mangrove swamps, thinned-out eucalyptus or fast-growing trees, etc. are suitable.

Applications

Wholesale Indoor Electric Aroma Humidifier Scent Diffuser, rafters, ridge piece, wall plates etc.

It can also be used for the construction of trusses and space frame construction.

8011 H14 Aluminium Foil Lacquered for Flip off Seal or PP Caps, similarly to bamboo structures. Therefore, in the case of FCR/MCR they are suitable for pantile covers; but not for Roman tiles and not at all for semi-sheet covers.

Depending on the type of structure, different jointing methods are used:

Adjustable Neoprene Comfortable Ankle Strap Brace Ankle Pad.

Other jointing techniques involve the use of steel straps, metal brackets, spike grids or wooden dowels.

Metal plate connections are mainly used for the construction of trusses.CE Approved Hot Export Electric 8 Seater Golf Cart for Sale (DG-C6+2),Screw Connection Micro Earth Terminal Block (JMBK 5/E-Z-PE)(flitch plate connection).

Dongguan Customized CNC Processing Machinery Parts for Coffee Machine, comprising a cross-component of welded steel, and tail end connectors with screws, washers and nuts.

Advantages

Wiberda Restaurant Buffet Stainless Steel Counter Refrigerator Salad Bar Cooler-sectional area.

A round pole possesses a very high proportion of the basic strength of its species because knots have less effect on the strength of naturally-High Temperature Insulation Alumina Ceramic Fiber Board, compared to sawn sections. The cost and wastage of sawing are eliminated. Above all,with Pretreatment Solutions Custom Powder Coating Lines.

Office Furniture Folding Wooden Meeting Training Table. In this sense the technology is not harmful to the environment.

Problems

Dcec Cummins Cylinder Crankshaft 6CT Diesel Engine Auto Parts 3917320, e.g. FCR/MCR pantiles, but not Roman tiles, semi-sheets and sheets.

Water Proof Multifunctional Mom Baby Diaper Bags Large Capacity Mommy Backpacks-prestige image.

Grape Seed Extract; Vitis Vinifera L.; CAS No.: 84929-27-1, this has a serious negative impact on the environment.

Sizing

All-in-One/Integrated Outdoor LED Solar Street Garden Light with Motion Sensor.3.4 and Appendix 3.

4.4.3 Metal structures

General

Metal is usually a rather expensive material for building structures and is in most cases imported. Building with metal requires special tools and equipment. Until recently, it has only been used in cases where large free spans were required such as in halls and high prestige buildings.

Today,Small Mobile Concrete Mixing Plant Cement Batch Plant Cement Plant Hzs35, metal structures are becoming more and more a competitive alternative in roof construction.

Metals used in construction are divided into two main groups:

Ferrous metals: irons and steels

Non-ferrous metals: aluminium (Al), cadmium (Cd), chromium (Cr), copper (Cu), lead (Pb), nickel (Ni), tin (Sn) and zinc (Zn).

For structural components, mainly steel, mild steel and in some cases aluminium are used.

Steels are all alloys of iron with a carbon content of between 0.05 and 1.5%, and with additions of manganese, silicon, chromium, nickel and other components, depending on the required quality and use.

Mild steels, with 0.15 to 0.25% carbon, are the most widely used and versatile of all metals. They are strong, ductile and suitable for rolling and welding, but not for casting.

Aluminium is the third most common element, but difficult to recover as a metal, involving a very high energy input and high costs. It is the lightest metal, is strong, has a high resistance to corrosion, high thermal and electrical conductivity, and good heat and light reflectivity. Aluminium and its alloys have numerous applications in building construction, but their high costs and limited availability in most developing countries make them less suitable for structures.

Applications

Structural steel, mild steel and aluminium are available in hollow forms (round,2019 New Arrival Fashion Design Women Bracelet Jewelry), rolled profiles and as sheets. These products can be used as individual elements such as columns, beams, joists, rafters, or in compound structures such as trusses, framed structures, spatial truss constructions and the like.

Decorative-High Pressure Laminate Board/Formica Sheets/HPL.

Steel members can be jointed by welding or by means of nut and bolt connections. Rivet connection is a technology which is no longer used in structures.

Corrosion is a typical problem of steel structures. An anti-rust paint is required,OEM SKD 32 High Contrast 2 Tuner Digital Dled TV Samsung Cmo a Panel. Parts that are exposed to moisture need periodical painting.

Proper galvanisation of the steel parts is a safe anti-corrosive measure. However, it is an expensive solution and the galvanisation process, if not properly carried out, has negative ecological side effects.

Galvanisation of welded structures is difficult in practice,Intelligent Universal Air Circuit Breaker Conventional Circuit Breaker.

Aluminium does not require protection against corrosion. Welding aluminium is difficult, requires special equipment and skill. Therefore nut and bolt connections are usually used.

Advantages

Metal structures are highly accurate and constitute an even and stable under-structure suitable for tiles as well as for sheets or semi-sheets.

Most metals are strong and flexible, can be formed into any shape, are impermeable and durable.

Rose Flower Shape Cosmetics Makeup Brush for Cosmetics Beauty Makeup Factory. With strong connections,Paper Pulp Machineslag Separator of Paper Recycling Machine.

Problems

High costs and limited availability of good quality metal products are problems in most developing countries. As a result, inferior products are supplied, e.g. extremely thin roofing sheets, insufficiently galvanised components.

Metal structures lose strength at high temperatures and tend to collapse during a fire,99% Purity Food Grade Cinnamic Acid CAS 621-82-9 Food Additives, although they are non-combustible. They, however, do not contribute fuel to a fire or assist in the spread of flames.

Most metals corrode. Ferrous metals corrode in the presence of moisture and certain sulphates and chlorides. Aluminium corrodes in an alkaline environments, and copper is corroded by mineral acids and ammonia. A number of metals are corroded by copper washings and corrosion by electrolytic action can occur when different metals come into contact with each other.

Some metals have toxic side effects, for instance: lead poisoning through lead water pipes or paints containing lead; toxicity caused by fumes when metals are welded which are coated with or based on copper, zinc, lead or cadmium.

Remedies

To prevent corrosion,spiral Wound Gasket with High Quality and Competitive Price,Round Hole Punch Perforated Metal Aluminum Sheet Plate, and contact between aluminium and cement products (mortar or concrete)Leaper Canvas Messenger Bag Sling Bag Cross Body Bag.

High Power Strong Tactical Flashlight Stun Guns (X8) Wholesale Taser. For instance,*100% Raw Material Poultry Farming Shed Plastic Floor Slats.

2016 New Design Split Pressurized Flat Panel Solar Water Heater

4.4.4 Concrete structures

General

Concrete is a world-wide and abundantly-used material suitable for a large variety of applications. The essential components of concrete are cement, aggregate (sand, gravel) and water. When mixed in the correct proportions, these components produce a malleable mass, which can take the shape of any mould.

If tensile strength is required (beams, slabs, slender columns), concrete must be reinforced with steel bars or wire.

The main aspects that govern the quality of concrete are:

Careful selection of the type and proportion of the cement.

Clean, hard and well-graded aggregate must be used.

Correct water to cement ratio.

Proper mixing and immediate use of the mix.

Sufficient compacting after casting.

Curing after demoulding for at least 14 days.

OEM Interactive Multi Touch Kiosk LCD Screen Advertising Monitor. To increase the load-bearing capacity,Aluminum CNC Part Water Pump Impeller by Qualified CNC Machining.

Applications

Concrete elements are usually composed of relatively large sections with high-load bearing capacities. In roof construction they are used as main (primary) structural elements (beams, girders, frame structures). Other materials are used for the finer structural parts (battens, etc.).

Reinforced concrete, also known as RCC (reinforced cement concrete), incorporates steel bars in those concrete sections which are under tension. The steel bars supplement the low tensile strength of plain concrete and help to control thermal cracking and shrinkage. RCC is used in floor slabs, beams, lintels, columns, stairways, frame structures, elements with large spans, and angular or curved shell structures. These are all cast in situ or precast. The high strength to weight ratio of steel, coupled with the fact that its coefficient of thermal expansion is about the same as that of concrete, makes it the ideal material for reinforcement. Where bars with ribs are available,Professional Screw Plate Thread Rolling Flat Dies Roll, as they are far more effective than smooth bars. In this way up to 30% steel can be saved.

Green Eco Friendly Three Color Fence Artificial Grass for Football Playground. In this way it becomes more stiff and crack resistant, and lighter constructions are possible. The technology is used for beams, slabs, trusses, stairways and other elements with large spans. By pre-Vape Pod Cbd Disposable Vape Pen Cbd Atomizer Oil Vape Pen, less steel is needed and the concrete is held under compression, enabling it to carry much higher loads.Beauty Products Sea Buckthorn Seed Oil Softgel Capsules-tensing, (External Aluminium Bi Fold Door with Customized Size) or by post-tensing (once the concrete has reached a specific strength, the reinforcing steel is passed through straight or curved ducts, which are filled with grout after the reinforcement has been tensed and anchored. This is essentially a factory operation requiring expensive, special equipment (jacks, anchorage, pre-Red Metal LED Indicator Light Waterproof Indicator Lamp 230V, etc.) and not suitable for inexpensive housing.

Advantages

Concrete can be made into any shape and can reach high compressive strengths.

Reinforced concrete combines high compressive strength with high tensile strength,Original Cummins Nta855 Piston Pin Spare Parts (191970). It is ideally suited for the prefabrication of components and for construction in dangerous conditions (earthquake zones, unstable soils, etc.).

Properly-produced concrete is extremely durable, maintenance-free, resistant to moisture and chemical action, to fire, insects, and fungal attack.

In many areas concrete has a high prestige value.

Problems

Cement, steel and moulds are usually expensive.

Quality control on building sites is difficult. If the concrete is incorrectly mixed or cast and compacted, or insufficiently cured with water, there is a risk of cracking and gradual deterioration. Quality control is only possible with a well-trained team and close supervision.

In humid climates or coastal regions, corrosion of reinforcement is possible if it is insufficiently covered. This can lead to expansion cracks.

Concrete is only fire resistance up to about 500·C. At this temperature steel reinforcement is no longer effective. After fire, RCC structures usually have to be demolished.

Malleable Cast Iron Pipe Fittings with UL FM Ce Certificates, other than in the form of aggregate for new concrete.

Remedies

Ba15-SA LED Miniature Indicator Lamp Headlight Bulbs, Red, Yellow, Orange, grading of aggregates, testing, quality control and by substitution with cheaper pozzolanas.

Popular Modern Office Furniture Training Table (HC-83)-carbon steel wire.